Scott D. Sommerfeldt
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Scott D. Sommerfeldt has a total of 104 co-authors. Here are the top co-authors by number of shared publications:
- Kent L. Gee
Department of Physics and Astronomy, Brigham Young University , Provo, Utah 84602
56 shared publications - Jonathan D. Blotter
Department of Mechanical Engineering, Brigham Young University
26 shared publications Tracianne B. Neilsen
Dept. of Phys. and Astronomy, Brigham Young Univ., N283 ESC, Provo, UT 84602
14 shared publications- Timothy W. Leishman
Brigham Young Univ., N311 ESC, Provo, UT 84602
10 shared publications - Tracianne B. Neilsen
Department of Physics and Astronomy, Brigham Young University , Provo, Utah 84602
7 shared publications - Caleb B. Goates
Brigham Young Univ., N283 ESC, Provo, UT 84602
6 shared publications
Latest Publications
- Open Access
- 1 March 2024
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 155 (3_Suppleme) , A216
Building the acoustics program at Brigham Young University
The history of acoustics at Brigham Young University dates well back into the first half of the twentieth century. Nonetheless, at the end of the twentieth century the program was on the verge of dying off. The author was hired in the Department of Physics and Astronomy at that time, in the hopes of revitalizing the acoustics program. Various steps were taken at opportune times to continuously rebuild the program to where it has become well known again – both nationally and internationally. The acoustics program is characterized by both a very strong undergraduate program in acoustics, as well as a thriving graduate program that has produced over 70 graduate theses and dissertations and even more undergraduate theses and capstone papers. This presentation will overview the growth and development of the acoustics program since 1995, highlighting lessons learned that may be useful for others looking to develop or strengthen their programs.
- 1 March 2024
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 155 (3_Suppleme) , A216
Open AccessBuilding the acoustics program at Brigham Young University
The history of acoustics at Brigham Young University dates well back into the first half of the twentieth century. Nonetheless, at the end of the twentieth century the program was on the verge of dying off. The author was hired in the Department of Physics and Astronomy at that time, in the hopes of revitalizing the acoustics program. Various steps were taken at opportune times to continuously rebuild the program to where it has become well known again – both nationally and internationally. The acoustics program is characterized by both a very strong undergraduate program in acoustics, as well as a thriving graduate program that has produced over 70 graduate theses and dissertations and even more undergraduate theses and capstone papers. This presentation will overview the growth and development of the acoustics program since 1995, highlighting lessons learned that may be useful for others looking to develop or strengthen their programs.
- Open Access
- 1 March 2023
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 153 (3_suppleme) , A209
The 1980s—The glory years for the development of active noise and vibration control
In the field of acoustics in general, and structural acoustics in particular, a new “hot topic” seems to burst upon the scene once or twice each decade. Everyone wants to get involved, numerous sessions on the topic appear at our meetings, and progress on the topic seems to leap forward—at least until the next hot topic comes along. In the 1980s, active noise and vibration control burst upon the scene, becoming the then current hot topic, as advances in digital signal processing made the technique much more attractive. The number of publications and presentations on the topic exploded, and active control was the bandwagon that everyone wanted to be on. The author was just beginning his career during this time period and was able to begin pursuing research on this topic in the early stages of the explosion. The intense interest in the topic continued until about the mid-1990s. This paper will review some of that early activity, what advances were made, why the interest seemed to decline in the 1990s, and what the current state of the discipline is as the research has continued to slowly move forward over the intervening years.
- 1 March 2023
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 153 (3_suppleme) , A209
Open AccessThe 1980s—The glory years for the development of active noise and vibration control
In the field of acoustics in general, and structural acoustics in particular, a new “hot topic” seems to burst upon the scene once or twice each decade. Everyone wants to get involved, numerous sessions on the topic appear at our meetings, and progress on the topic seems to leap forward—at least until the next hot topic comes along. In the 1980s, active noise and vibration control burst upon the scene, becoming the then current hot topic, as advances in digital signal processing made the technique much more attractive. The number of publications and presentations on the topic exploded, and active control was the bandwagon that everyone wanted to be on. The author was just beginning his career during this time period and was able to begin pursuing research on this topic in the early stages of the explosion. The intense interest in the topic continued until about the mid-1990s. This paper will review some of that early activity, what advances were made, why the interest seemed to decline in the 1990s, and what the current state of the discipline is as the research has continued to slowly move forward over the intervening years.
- Open Access
- 1 January 2023
- Published by Acoustical Society of America (ASA) in Proceedings of Meetings on Acoustics
- Vol. 51 (1) , 065001
The dependence of sound radiation on position of acoustic source in an enclosure
In some applications, acoustic sources may be confined to a small enclosure but still radiating sound out-wards through the enclosure. However, the sound power
- 1 January 2023
- Published by Acoustical Society of America (ASA) in Proceedings of Meetings on Acoustics
- Vol. 51 (1) , 065001
Open AccessThe dependence of sound radiation on position of acoustic source in an enclosure
In some applications, acoustic sources may be confined to a small enclosure but still radiating sound out-wards through the enclosure. However, the sound power
- Open Access
- 1 December 2022
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 2 (12) , 125601
Improved efficiency of vibration-based sound power computation through multi-layered radiation resistance matrix symmetry
Computing sound power using complex-valued surface velocities involves using a geometry-dependent acoustic radiation resistance matrix multiplied by a velocity vector to compute sound power for a given frequency range. Using a laser scan grid with constant spacing and a scalar radiator area approximation, a multi-layered Toeplitz symmetry exists in the radiation resistance matrix. An innovative approach was developed to exploit this Toeplitz symmetry. This approach preserved accuracy and resulted in a maximum of ∼1300% computation time reduction for curved plate calculations and a ∼9600% computation time reduction for cylindrical shell sound power calculations.
- 1 December 2022
- Published by Acoustical Society of America (ASA) in JASA Express Letters
- Vol. 2 (12) , 125601
Open AccessImproved efficiency of vibration-based sound power computation through multi-layered radiation resistance matrix symmetry
Computing sound power using complex-valued surface velocities involves using a geometry-dependent acoustic radiation resistance matrix multiplied by a velocity vector to compute sound power for a given frequency range. Using a laser scan grid with constant spacing and a scalar radiator area approximation, a multi-layered Toeplitz symmetry exists in the radiation resistance matrix. An innovative approach was developed to exploit this Toeplitz symmetry. This approach preserved accuracy and resulted in a maximum of ∼1300% computation time reduction for curved plate calculations and a ∼9600% computation time reduction for cylindrical shell sound power calculations.
- 1 June 2022
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 151 (6) , 4053-4060
A coherence-based phase and amplitude gradient estimator method for calculating active acoustic intensity
The phase and amplitude gradient estimator (PAGE) method [Thomas, Christensen, and Gee, J. Acoust. Soc. Am. 137, 3366–3376 (2015)] has been developed as an alternative to the traditional p-p method for calculating energy-based acoustic measures such as active acoustic intensity. While this method shows many marked improvements over the traditional method, such as a wider valid frequency bandwidth for broadband sources, contaminating noise can lead to inaccurate results. Contaminating noise degrades performance for both the traditional and PAGE methods and causes probe microphone pairs to exhibit low coherence. When coherence is low, better estimates of the pressure magnitude and gradient can be obtained by using a coherence-based approach, which yields a more accurate intensity estimate. This coherence-based approach to the PAGE method, known as the CPAGE method, employs two main coherence-based adjustments. The pressure magnitude adjustment mitigates the negative impact of uncorrelated contaminating noise and improves intensity magnitude calculation. The phase gradient adjustment uses coherence as a weighting to calculate the phase gradient for the probe and improves primarily the calculation of intensity direction. Though requiring a greater computation time than the PAGE method, the CPAGE method is shown to improve intensity calculations, both in magnitude and direction.
- 1 June 2022
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 151 (6) , 4053-4060
A coherence-based phase and amplitude gradient estimator method for calculating active acoustic intensity
The phase and amplitude gradient estimator (PAGE) method [Thomas, Christensen, and Gee, J. Acoust. Soc. Am. 137, 3366–3376 (2015)] has been developed as an alternative to the traditional p-p method for calculating energy-based acoustic measures such as active acoustic intensity. While this method shows many marked improvements over the traditional method, such as a wider valid frequency bandwidth for broadband sources, contaminating noise can lead to inaccurate results. Contaminating noise degrades performance for both the traditional and PAGE methods and causes probe microphone pairs to exhibit low coherence. When coherence is low, better estimates of the pressure magnitude and gradient can be obtained by using a coherence-based approach, which yields a more accurate intensity estimate. This coherence-based approach to the PAGE method, known as the CPAGE method, employs two main coherence-based adjustments. The pressure magnitude adjustment mitigates the negative impact of uncorrelated contaminating noise and improves intensity magnitude calculation. The phase gradient adjustment uses coherence as a weighting to calculate the phase gradient for the probe and improves primarily the calculation of intensity direction. Though requiring a greater computation time than the PAGE method, the CPAGE method is shown to improve intensity calculations, both in magnitude and direction.
- 1 February 2022
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 151 (2) , 1171-1179
Vibration-based sound power measurements of arbitrarily curved panels
Vibration-based sound power (VBSP) measurement methods are appealing because of their potential versatility in application compared to sound pressure and intensity-based methods. It has been understood that VBSP methods have been reliant on the acoustic radiation resistance matrix specific to the surface shape. Expressions for these matrices have been developed and presented in the literature for flat plates, simple-curved plates (constant radius of curvature in one direction), and cylindrical- and spherical-shells. This paper shows that the VBSP method is relatively insensitive to the exact form of the radiation resistance matrix and that computationally efficient forms of the radiation resistance matrix can be used to accurately approximate the sound power radiated from arbitrarily curved panels. Experimental sound power measurements using the VBSP method with the simple-curved plate radiation resistance matrix and the ISO 3741 standard method are compared for two arbitrarily curved panels and are shown to have good agreement. The VBSP method based on the simple-curved plate form of the radiation resistance matrix is also shown to have excellent agreement with numerical results from a boundary element model, which inherently uses the appropriate form of the radiation resistance matrix.
- 1 February 2022
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 151 (2) , 1171-1179
Vibration-based sound power measurements of arbitrarily curved panels
Vibration-based sound power (VBSP) measurement methods are appealing because of their potential versatility in application compared to sound pressure and intensity-based methods. It has been understood that VBSP methods have been reliant on the acoustic radiation resistance matrix specific to the surface shape. Expressions for these matrices have been developed and presented in the literature for flat plates, simple-curved plates (constant radius of curvature in one direction), and cylindrical- and spherical-shells. This paper shows that the VBSP method is relatively insensitive to the exact form of the radiation resistance matrix and that computationally efficient forms of the radiation resistance matrix can be used to accurately approximate the sound power radiated from arbitrarily curved panels. Experimental sound power measurements using the VBSP method with the simple-curved plate radiation resistance matrix and the ISO 3741 standard method are compared for two arbitrarily curved panels and are shown to have good agreement. The VBSP method based on the simple-curved plate form of the radiation resistance matrix is also shown to have excellent agreement with numerical results from a boundary element model, which inherently uses the appropriate form of the radiation resistance matrix.
- 1 August 2021
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 263 (4) , 2755-2766
Experimental sound power from curved plates using the radiation resistance matrix and a scanning vibrometer
Vibration-based sound power (VBSP) methods based on elemental radiators and measurements from a scanning vibrometer have been shown to be accurate for flat plates and cylinders. In this paper, the VBSP method is extended to account for simple curved structures, with a constant radius of curvature. Data are also presented that suggest the VBSP method is more accurate than the ISO 3741 standard for measuring sound power when significant background noise is present. Experimental results from ISO 3741 and the VBSP methods are compared for three simple curved plate structures with different radii of curvature. The results show good agreement for all three structures over a wide frequency range. The experimental results also indicate that the VBSP method is more accurate in the low frequency range where the curved plates radiated relatively little and significant background noise was present.
- 1 August 2021
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 263 (4) , 2755-2766
Experimental sound power from curved plates using the radiation resistance matrix and a scanning vibrometer
Vibration-based sound power (VBSP) methods based on elemental radiators and measurements from a scanning vibrometer have been shown to be accurate for flat plates and cylinders. In this paper, the VBSP method is extended to account for simple curved structures, with a constant radius of curvature. Data are also presented that suggest the VBSP method is more accurate than the ISO 3741 standard for measuring sound power when significant background noise is present. Experimental results from ISO 3741 and the VBSP methods are compared for three simple curved plate structures with different radii of curvature. The results show good agreement for all three structures over a wide frequency range. The experimental results also indicate that the VBSP method is more accurate in the low frequency range where the curved plates radiated relatively little and significant background noise was present.
- 1 August 2021
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 263 (4) , 2812-2821
A hybrid method for broadband vibroacoustic simulations
Many methods for simulating acoustic responses of vibrating systems are only suitable for limited frequency ranges, providing either an accurate low frequency or high frequency response. A hybrid method is presented to combine a low frequency modal response and a high frequency statistical energy response to obtain a unified broadband response. The method is designed to produce an auralizable response. An experimental setup is used to validate the method. Listening tests are conducted to assess the realism of the auralizations compared to measurements. The listening tests confirm that the method is able to produce realistic auralizations, subject to a few limitations.
- 1 August 2021
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 263 (4) , 2812-2821
A hybrid method for broadband vibroacoustic simulations
Many methods for simulating acoustic responses of vibrating systems are only suitable for limited frequency ranges, providing either an accurate low frequency or high frequency response. A hybrid method is presented to combine a low frequency modal response and a high frequency statistical energy response to obtain a unified broadband response. The method is designed to produce an auralizable response. An experimental setup is used to validate the method. Listening tests are conducted to assess the realism of the auralizations compared to measurements. The listening tests confirm that the method is able to produce realistic auralizations, subject to a few limitations.
- 1 August 2021
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 263 (3) , 3396-3406
A compact active structural acoustic control method for minimizing radiated sound power
Active structural acoustic control is an active control method that controls a vibrating structure in a manner that reduces the sound power radiated from the structure. Such methods focus on attenuating some metric that results in attenuated sound power, while not necessarily minimizing the structural vibration. The work reported here outlines the weighted sum of spatial gradients (WSSG) control metric as a method to attenuate structural radiation. The WSSG method utilizes a compact error sensor that is able to measure the acceleration and the acceleration gradients at the sensor location. These vibration signals are combined into the WSSG metric in a manner that is closely related to the radiated sound power, such that minimizing the WSSG also results in a minimization of the sound power. The connection between WSSG and acoustic radiation modes will be highlighted. Computational and experimental results for both flat plates and cylindrical shells will be presented, indicating that the WSSG method can achieve near optimal attenuation of the radiated sound power with a minimum number of sensors.
- 1 August 2021
- Published by Institute of Noise Control Engineering (INCE) in INTER-NOISE and NOISE-CON Congress and Conference Proceedings
- Vol. 263 (3) , 3396-3406
A compact active structural acoustic control method for minimizing radiated sound power
Active structural acoustic control is an active control method that controls a vibrating structure in a manner that reduces the sound power radiated from the structure. Such methods focus on attenuating some metric that results in attenuated sound power, while not necessarily minimizing the structural vibration. The work reported here outlines the weighted sum of spatial gradients (WSSG) control metric as a method to attenuate structural radiation. The WSSG method utilizes a compact error sensor that is able to measure the acceleration and the acceleration gradients at the sensor location. These vibration signals are combined into the WSSG metric in a manner that is closely related to the radiated sound power, such that minimizing the WSSG also results in a minimization of the sound power. The connection between WSSG and acoustic radiation modes will be highlighted. Computational and experimental results for both flat plates and cylindrical shells will be presented, indicating that the WSSG method can achieve near optimal attenuation of the radiated sound power with a minimum number of sensors.
- 1 December 2020
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 148 (6) , 3553-3561
Sound power of vibrating cylinders using the radiation resistance matrix and a laser vibrometer
Research has shown that using acoustic radiation modes combined with surface velocity measurements provide an accurate method of measuring the radiated sound power from vibrating plates. This paper investigates the extension of this method to acoustically radiating cylindrical structures. The mathematical formulations of the radiation resistance matrix and the accompanying acoustic radiation modes of a baffled cylinder are developed. Computational sound power calculations using the vibration-based radiation mode (VBRM) method and the boundary element method are then compared and shown to have good agreement. Experimental surface velocity measurements of a cylinder are taken using a scanning laser Doppler vibrometer and the VBRM method is used to calculate sound power. The results are compared to sound power measurements taken using ISO 3741.
- 1 December 2020
- Published by Acoustical Society of America (ASA) in The Journal of the Acoustical Society of America
- Vol. 148 (6) , 3553-3561
Sound power of vibrating cylinders using the radiation resistance matrix and a laser vibrometer
Research has shown that using acoustic radiation modes combined with surface velocity measurements provide an accurate method of measuring the radiated sound power from vibrating plates. This paper investigates the extension of this method to acoustically radiating cylindrical structures. The mathematical formulations of the radiation resistance matrix and the accompanying acoustic radiation modes of a baffled cylinder are developed. Computational sound power calculations using the vibration-based radiation mode (VBRM) method and the boundary element method are then compared and shown to have good agreement. Experimental surface velocity measurements of a cylinder are taken using a scanning laser Doppler vibrometer and the VBRM method is used to calculate sound power. The results are compared to sound power measurements taken using ISO 3741.