Roman Guntermann
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Roman Guntermann has a total of 108 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Bein
Department of Chemistry and Center for NanoScience (CeNS) Ludwig‐Maximilians‐Universität (LMU) Munich Germany
19 shared publications - Dana Dina Medina
Department of Chemistry and Center for Nanoscience (CeNS) Ludwig‐Maximilians‐Universität (LMU) Butenandtstraße 11 (E) 81377 Munich Germany
8 shared publications - Apeksha Singh
Department of Chemistry and Center for NanoScience (CeNS) Ludwig‐Maximilians‐Universität (LMU) Munich Germany
7 shared publications - Tianhao Xue
Department of Chemistry and Center for Nanoscience (CeNS) Ludwig-Maximilians-Universität (LMU) Butenandtstraße 11 (E) 81377 Munich Germany
4 shared publications Alexander Biewald
Department of Chemistry and Center for NanoScience (CeNS), University of Munich (LMU), Butenandtstraße 5-13, Munich 81377, Germany
3 shared publicationsDana D. Medina
Department of Chemistry and Center for NanoScience (CeNS), University of Munich (LMU), Butenandtstraße 5-13, 81377 Munich, Germany
3 shared publications
Latest Publications
- 11 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (33) , e5591473
Molecularly Precise Triangular Termination of Kagome Covalent Organic Framework Crystals Enabled by Side‐Chain Engineering
High‐resolution structural characterization of two‐dimensional (2D) kagome covalent organic frameworks (COFs) remains limited, often leaving critical questions about lattice ordering and surface‐terminating functionality largely unanswered. To address this challenge, we designed a series of acceptor–donor–acceptor linear linkers based on benzo[1,2‐ b :4,5‐ b ′]dithiophene and 2,1,3‐benzothiadiazole units with systematically varied alkoxy side chains. Diverse 2D kagome COFs bearing methoxy, ethoxy, and propoxy side chains were synthesized by imine condensation of these linkers with a dibenzo[ g , p ]chrysene‐based node. While featuring identical backbone architecture, the resulting COFs exhibit remarkably different degrees of crystallinity, demonstrating the critical role of side‐chain length in regulating framework ordering. Owing to its superior crystallinity and large pore apertures, the methoxy‐substituted COF (OMe COF) enables direct real‐space visualization of extended kagome pore lattices by high‐resolution transmission electron microscopy (HRTEM). Furthermore, highly crystalline and preferentially oriented OMe COF thin films were synthesized, allowing for detailed HRTEM analysis. Strikingly, HRTEM could clearly resolve triangular terminations of the kagome lattice, thereby establishing the half‐condensed dibenzochrysene nodes as the triangular pores terminating the crystal facets and providing unprecedented real‐space evidence of exposed amino groups. These findings create a structural basis for the future rational design of surface functionalization and potential interfacial engineering in 2D kagome COFs.
- 11 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (33) , e5591473
Molecularly Precise Triangular Termination of Kagome Covalent Organic Framework Crystals Enabled by Side‐Chain Engineering
High‐resolution structural characterization of two‐dimensional (2D) kagome covalent organic frameworks (COFs) remains limited, often leaving critical questions about lattice ordering and surface‐terminating functionality largely unanswered. To address this challenge, we designed a series of acceptor–donor–acceptor linear linkers based on benzo[1,2‐ b :4,5‐ b ′]dithiophene and 2,1,3‐benzothiadiazole units with systematically varied alkoxy side chains. Diverse 2D kagome COFs bearing methoxy, ethoxy, and propoxy side chains were synthesized by imine condensation of these linkers with a dibenzo[ g , p ]chrysene‐based node. While featuring identical backbone architecture, the resulting COFs exhibit remarkably different degrees of crystallinity, demonstrating the critical role of side‐chain length in regulating framework ordering. Owing to its superior crystallinity and large pore apertures, the methoxy‐substituted COF (OMe COF) enables direct real‐space visualization of extended kagome pore lattices by high‐resolution transmission electron microscopy (HRTEM). Furthermore, highly crystalline and preferentially oriented OMe COF thin films were synthesized, allowing for detailed HRTEM analysis. Strikingly, HRTEM could clearly resolve triangular terminations of the kagome lattice, thereby establishing the half‐condensed dibenzochrysene nodes as the triangular pores terminating the crystal facets and providing unprecedented real‐space evidence of exposed amino groups. These findings create a structural basis for the future rational design of surface functionalization and potential interfacial engineering in 2D kagome COFs.
- 11 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (33)
Molecularly Precise Triangular Termination of Kagome Covalent Organic Framework Crystals Enabled by Side‐Chain Engineering
High‐resolution structural characterization of two‐dimensional (2D) kagome covalent organic frameworks (COFs) remains limited, often leaving critical questions about lattice ordering and surface‐terminating functionality largely unanswered. To address this challenge, we designed a series of acceptor–donor–acceptor linear linkers based on benzo[1,2‐ b :4,5‐ b ′]dithiophene and 2,1,3‐benzothiadiazole units with systematically varied alkoxy side chains. Diverse 2D kagome COFs bearing methoxy, ethoxy, and propoxy side chains were synthesized by imine condensation of these linkers with a dibenzo[ g , p ]chrysene‐based node. While featuring identical backbone architecture, the resulting COFs exhibit remarkably different degrees of crystallinity, demonstrating the critical role of side‐chain length in regulating framework ordering. Owing to its superior crystallinity and large pore apertures, the methoxy‐substituted COF (OMe COF) enables direct real‐space visualization of extended kagome pore lattices by high‐resolution transmission electron microscopy (HRTEM). Furthermore, highly crystalline and preferentially oriented OMe COF thin films were synthesized, allowing for detailed HRTEM analysis. Strikingly, HRTEM could clearly resolve triangular terminations of the kagome lattice, thereby establishing the half‐condensed dibenzochrysene nodes as the triangular pores terminating the crystal facets and providing unprecedented real‐space evidence of exposed amino groups. These findings create a structural basis for the future rational design of surface functionalization and potential interfacial engineering in 2D kagome COFs.
- 11 June 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (33)
Molecularly Precise Triangular Termination of Kagome Covalent Organic Framework Crystals Enabled by Side‐Chain Engineering
High‐resolution structural characterization of two‐dimensional (2D) kagome covalent organic frameworks (COFs) remains limited, often leaving critical questions about lattice ordering and surface‐terminating functionality largely unanswered. To address this challenge, we designed a series of acceptor–donor–acceptor linear linkers based on benzo[1,2‐ b :4,5‐ b ′]dithiophene and 2,1,3‐benzothiadiazole units with systematically varied alkoxy side chains. Diverse 2D kagome COFs bearing methoxy, ethoxy, and propoxy side chains were synthesized by imine condensation of these linkers with a dibenzo[ g , p ]chrysene‐based node. While featuring identical backbone architecture, the resulting COFs exhibit remarkably different degrees of crystallinity, demonstrating the critical role of side‐chain length in regulating framework ordering. Owing to its superior crystallinity and large pore apertures, the methoxy‐substituted COF (OMe COF) enables direct real‐space visualization of extended kagome pore lattices by high‐resolution transmission electron microscopy (HRTEM). Furthermore, highly crystalline and preferentially oriented OMe COF thin films were synthesized, allowing for detailed HRTEM analysis. Strikingly, HRTEM could clearly resolve triangular terminations of the kagome lattice, thereby establishing the half‐condensed dibenzochrysene nodes as the triangular pores terminating the crystal facets and providing unprecedented real‐space evidence of exposed amino groups. These findings create a structural basis for the future rational design of surface functionalization and potential interfacial engineering in 2D kagome COFs.
- Open Access
- 8 June 2026
- Published by Wiley in Small Structures
- Vol. 7 (6)
Recent Advances in Photoelectrochemical Water Splitting Enabled by Covalent Organic Frameworks
Owing to its near‐zero greenhouse gas emissions and its emerging role as an energy source in a wide range of applications, hydrogen has gained significant relevance, particularly in the context of combating climate change. Thus, a key area of focus in fossil fuel‐free energy is solar‐driven water splitting for the H 2 evolution predominantly via photo‐ and photoelectrochemical catalytic processes (PC or PEC). Beyond a broad spectrum of well‐established photoactive inorganic catalysts, organic semiconductors are gaining increasing attention as versatile alternatives owing to their tunable chemical composition. In this context, the polymeric material class of 2D covalent organic frameworks (2D COFs) is emerging as an intriguing absorber layer and catalyst for the light‐driven PEC processes, accounting to its chemical durability and immense structural diversity combined with long‐range order. This review outlines the construction principles of 2D COFs, including building block design and linkage motif, and the use of 2D COFs in photo(electro)catalytic water splitting. A particular emphasis is given to COF film fabrication techniques and surface deposition methods addressing challenges associated with device fabrication for PEC catalysis.
- 8 June 2026
- Published by Wiley in Small Structures
- Vol. 7 (6)
Open AccessRecent Advances in Photoelectrochemical Water Splitting Enabled by Covalent Organic Frameworks
Owing to its near‐zero greenhouse gas emissions and its emerging role as an energy source in a wide range of applications, hydrogen has gained significant relevance, particularly in the context of combating climate change. Thus, a key area of focus in fossil fuel‐free energy is solar‐driven water splitting for the H 2 evolution predominantly via photo‐ and photoelectrochemical catalytic processes (PC or PEC). Beyond a broad spectrum of well‐established photoactive inorganic catalysts, organic semiconductors are gaining increasing attention as versatile alternatives owing to their tunable chemical composition. In this context, the polymeric material class of 2D covalent organic frameworks (2D COFs) is emerging as an intriguing absorber layer and catalyst for the light‐driven PEC processes, accounting to its chemical durability and immense structural diversity combined with long‐range order. This review outlines the construction principles of 2D COFs, including building block design and linkage motif, and the use of 2D COFs in photo(electro)catalytic water splitting. A particular emphasis is given to COF film fabrication techniques and surface deposition methods addressing challenges associated with device fabrication for PEC catalysis.
- 31 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (7) , 3536-3544
Tuning Optoelectronic Properties in Isoreticular Three-Dimensional Fully Conjugated Covalent Organic Frameworks
- 31 March 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (7) , 3536-3544
Tuning Optoelectronic Properties in Isoreticular Three-Dimensional Fully Conjugated Covalent Organic Frameworks
- 10 February 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (12)
Tuning Redox Behavior of Pyrene–Benzothiadiazole/TTF–Based Covalent Organic Framework Electrodes in Dual‐Ion Batteries
Covalent organic frameworks (COFs) have emerged as promising electrode materials for secondary‐ion batteries, where redox‐active building blocks and linkages enable tunable redox properties, while ordered pores serve as nanochannels for fast ion transport. We report a novel highly crystalline 2D PyTTF‐COF, synthesized by integrating n ‐type pyrene–benzothiadiazole (PyBT) and p ‐type tetrathiafulvalene (TTF) subunits via an n ‐type imine linkage, yielding a bipolar electrode capable of reversible 16 e − dual cation–anion storage. Initially, the dual‐ion, redox synergy was tested in a Li‐ion half‐cell, where PyTTF served as cathode, and 1 м LiPF 6 or LiTFSI electrolytes were employed to probe anion‐dependent electrochemical behavior. Electrochemical evaluation in Li‐ion half cells revealed a wide electrochemical window of 0.1−3.6 V vs. Li/Li + , with markedly enhanced charge‐storage kinetics and ion diffusion with LiTFSI relative to LiPF 6 electrolytes. The PyTTF electrode delivered specific capacities of 286 mAh g −1 (LiTFSI) and 184 mAh g −1 (LiPF 6 ) at 0.3 A g −1 , highlighting the strong influence of anion identity. Systematic variation of LiTFSI salt concentration (1−3 м) revealed strong correlations between electrolyte composition, ion storage dynamics, and interfacial charge‐transfer resistance. This study highlights, for the first time, the critical importance of tailoring both charge‐carrier identity and electrolyte concentration to unlock the full potential of bipolar COF electrodes for dual‐ion batteries.
- 10 February 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (12)
Tuning Redox Behavior of Pyrene–Benzothiadiazole/TTF–Based Covalent Organic Framework Electrodes in Dual‐Ion Batteries
Covalent organic frameworks (COFs) have emerged as promising electrode materials for secondary‐ion batteries, where redox‐active building blocks and linkages enable tunable redox properties, while ordered pores serve as nanochannels for fast ion transport. We report a novel highly crystalline 2D PyTTF‐COF, synthesized by integrating n ‐type pyrene–benzothiadiazole (PyBT) and p ‐type tetrathiafulvalene (TTF) subunits via an n ‐type imine linkage, yielding a bipolar electrode capable of reversible 16 e − dual cation–anion storage. Initially, the dual‐ion, redox synergy was tested in a Li‐ion half‐cell, where PyTTF served as cathode, and 1 м LiPF 6 or LiTFSI electrolytes were employed to probe anion‐dependent electrochemical behavior. Electrochemical evaluation in Li‐ion half cells revealed a wide electrochemical window of 0.1−3.6 V vs. Li/Li + , with markedly enhanced charge‐storage kinetics and ion diffusion with LiTFSI relative to LiPF 6 electrolytes. The PyTTF electrode delivered specific capacities of 286 mAh g −1 (LiTFSI) and 184 mAh g −1 (LiPF 6 ) at 0.3 A g −1 , highlighting the strong influence of anion identity. Systematic variation of LiTFSI salt concentration (1−3 м) revealed strong correlations between electrolyte composition, ion storage dynamics, and interfacial charge‐transfer resistance. This study highlights, for the first time, the critical importance of tailoring both charge‐carrier identity and electrolyte concentration to unlock the full potential of bipolar COF electrodes for dual‐ion batteries.
- 9 February 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (12) , e22720
Tuning Redox Behavior of Pyrene–Benzothiadiazole/TTF–Based Covalent Organic Framework Electrodes in Dual‐Ion Batteries
Covalent organic frameworks (COFs) have emerged as promising electrode materials for secondary‐ion batteries, where redox‐active building blocks and linkages enable tunable redox properties, while ordered pores serve as nanochannels for fast ion transport. We report a novel highly crystalline 2D PyTTF‐COF, synthesized by integrating n ‐type pyrene–benzothiadiazole (PyBT) and p ‐type tetrathiafulvalene (TTF) subunits via an n ‐type imine linkage, yielding a bipolar electrode capable of reversible 16 e − dual cation–anion storage. Initially, the dual‐ion, redox synergy was tested in a Li‐ion half‐cell, where PyTTF served as cathode, and 1 м LiPF 6 or LiTFSI electrolytes were employed to probe anion‐dependent electrochemical behavior. Electrochemical evaluation in Li‐ion half cells revealed a wide electrochemical window of 0.1−3.6 V vs. Li/Li + , with markedly enhanced charge‐storage kinetics and ion diffusion with LiTFSI relative to LiPF 6 electrolytes. The PyTTF electrode delivered specific capacities of 286 mAh g −1 (LiTFSI) and 184 mAh g −1 (LiPF 6 ) at 0.3 A g −1 , highlighting the strong influence of anion identity. Systematic variation of LiTFSI salt concentration (1−3 м) revealed strong correlations between electrolyte composition, ion storage dynamics, and interfacial charge‐transfer resistance. This study highlights, for the first time, the critical importance of tailoring both charge‐carrier identity and electrolyte concentration to unlock the full potential of bipolar COF electrodes for dual‐ion batteries.
- 9 February 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (12) , e22720
Tuning Redox Behavior of Pyrene–Benzothiadiazole/TTF–Based Covalent Organic Framework Electrodes in Dual‐Ion Batteries
Covalent organic frameworks (COFs) have emerged as promising electrode materials for secondary‐ion batteries, where redox‐active building blocks and linkages enable tunable redox properties, while ordered pores serve as nanochannels for fast ion transport. We report a novel highly crystalline 2D PyTTF‐COF, synthesized by integrating n ‐type pyrene–benzothiadiazole (PyBT) and p ‐type tetrathiafulvalene (TTF) subunits via an n ‐type imine linkage, yielding a bipolar electrode capable of reversible 16 e − dual cation–anion storage. Initially, the dual‐ion, redox synergy was tested in a Li‐ion half‐cell, where PyTTF served as cathode, and 1 м LiPF 6 or LiTFSI electrolytes were employed to probe anion‐dependent electrochemical behavior. Electrochemical evaluation in Li‐ion half cells revealed a wide electrochemical window of 0.1−3.6 V vs. Li/Li + , with markedly enhanced charge‐storage kinetics and ion diffusion with LiTFSI relative to LiPF 6 electrolytes. The PyTTF electrode delivered specific capacities of 286 mAh g −1 (LiTFSI) and 184 mAh g −1 (LiPF 6 ) at 0.3 A g −1 , highlighting the strong influence of anion identity. Systematic variation of LiTFSI salt concentration (1−3 м) revealed strong correlations between electrolyte composition, ion storage dynamics, and interfacial charge‐transfer resistance. This study highlights, for the first time, the critical importance of tailoring both charge‐carrier identity and electrolyte concentration to unlock the full potential of bipolar COF electrodes for dual‐ion batteries.
- Open Access
- 6 August 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (37)
Covalent Organic Framework Bipolar Pseudocapacitive Electrodes in an All‐Organic Symmetric Lithium‐Ion Battery
Covalent organic frameworks (COFs) have emerged as promising active materials for secondary‐ion battery electrodes, owing to their robust porous structure and the flexibility in selecting redox‐active building blocks. Here, a novel highly crystalline, electro‐active, bipolar‐type WTTF ‐COF, obtained by integrating p‐type N , N , N ′, N ′‐tetrakis(4‐aminophenyl)‐1,4‐phenylenediamine ( W ) and 4,4′,4″,4′″‐([2,2'‐bi(1,3‐dithiolylidene)]‐4,4′,5,5′‐tetrayl)tetrabenzaldehyde ( TTF ) molecular building blocks via n‐type imine linkages, is reported, serving as a Li‐ion battery electrode. In Li‐ion half cells, WTTF ‐COF as a cathode features 12‐electron dual‐ion redox chemistry per unit cell within a stable, unusually wide potential window of 0.1–3.6 V versus Li/Li + , corresponding to a high theoretical capacity of 315 mAh g −1 , with an experimental reversible specific capacity of 271 mAh g −1 at 0.1 A g −1 . The hybrid redox features coupled with the long‐range ordered nanostructure of WTTF ‐COF enable an efficient pseudo‐capacitive charge‐storage mechanism. Different diffusion pathways and diffusion coefficients for Li + and PF 6 − transport are established through detailed diffusion measurements and theoretical modeling. Among hybrid storage electrodes, WTTF ‐COF is reported to offer the option to serve as both anode and cathode up to a high rate of 200 mV s −1 , as demonstrated in fully organic symmetric cell tests. Summarizing, judiciously designed COFs are suitably established for efficient bipolar electrode applications.
- 6 August 2025
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (37)
Open AccessCovalent Organic Framework Bipolar Pseudocapacitive Electrodes in an All‐Organic Symmetric Lithium‐Ion Battery
Covalent organic frameworks (COFs) have emerged as promising active materials for secondary‐ion battery electrodes, owing to their robust porous structure and the flexibility in selecting redox‐active building blocks. Here, a novel highly crystalline, electro‐active, bipolar‐type WTTF ‐COF, obtained by integrating p‐type N , N , N ′, N ′‐tetrakis(4‐aminophenyl)‐1,4‐phenylenediamine ( W ) and 4,4′,4″,4′″‐([2,2'‐bi(1,3‐dithiolylidene)]‐4,4′,5,5′‐tetrayl)tetrabenzaldehyde ( TTF ) molecular building blocks via n‐type imine linkages, is reported, serving as a Li‐ion battery electrode. In Li‐ion half cells, WTTF ‐COF as a cathode features 12‐electron dual‐ion redox chemistry per unit cell within a stable, unusually wide potential window of 0.1–3.6 V versus Li/Li + , corresponding to a high theoretical capacity of 315 mAh g −1 , with an experimental reversible specific capacity of 271 mAh g −1 at 0.1 A g −1 . The hybrid redox features coupled with the long‐range ordered nanostructure of WTTF ‐COF enable an efficient pseudo‐capacitive charge‐storage mechanism. Different diffusion pathways and diffusion coefficients for Li + and PF 6 − transport are established through detailed diffusion measurements and theoretical modeling. Among hybrid storage electrodes, WTTF ‐COF is reported to offer the option to serve as both anode and cathode up to a high rate of 200 mV s −1 , as demonstrated in fully organic symmetric cell tests. Summarizing, judiciously designed COFs are suitably established for efficient bipolar electrode applications.
- 13 June 2025
- Published by Wiley in Small Science
- Vol. 5 (6)
Redox‐Active Microporous Covalent Organic Frameworks for Additive‐Free Supercapacitors
- 13 June 2025
- Published by Wiley in Small Science
- Vol. 5 (6)
Redox‐Active Microporous Covalent Organic Frameworks for Additive‐Free Supercapacitors
- Open Access
Surface Charge Modulation in Covalent Organic Frameworks for Controlled Pt‐Photodeposition and Enhanced Photocatalytic Hydrogen Evolution
Covalent organic frameworks (COFs) represent a new class of organic photocatalysts for the hydrogen evolution reaction (HER). While the influence of COF structural and optoelectronic properties on HER is well‐studied, the role of surface charge in optimizing interfacial interactions with reactants remains underexplored. In this study, it is demonstrated that converting imine to amide linkages in a thiophene‐based COF allows for altering surface charge through different protonation behaviors of the linkages. Zeta potential measurements reveal that the amide‐linked COF, due to its lower basicity, is deprotonated and negatively charged in the presence of ascorbic acid, while the imine‐linked COF is protonated and positively charged. This electrostatic contrast drives the photoreduction of [PtCl 6 ] 2 ⁻ to Pt, with the imine‐linked COF yielding uniformly distributed small Pt particles (1–2 nm), whereas the amide‐linked COF forms larger Pt particles (up to 100 nm). The amide‐linked COF, acting as an antenna that facilitates interdomain electron transport along COF agglomerates, promotes both Pt growth and subsequent proton reduction demonstrating a 300% increase in photocatalytic HER rate compared to its imine form. This work introduces surface charge modulation as a novel tool for controlling photocatalytic processes in COF‐based systems expanding the COF functionality in photocatalysis.
Open AccessSurface Charge Modulation in Covalent Organic Frameworks for Controlled Pt‐Photodeposition and Enhanced Photocatalytic Hydrogen Evolution
Covalent organic frameworks (COFs) represent a new class of organic photocatalysts for the hydrogen evolution reaction (HER). While the influence of COF structural and optoelectronic properties on HER is well‐studied, the role of surface charge in optimizing interfacial interactions with reactants remains underexplored. In this study, it is demonstrated that converting imine to amide linkages in a thiophene‐based COF allows for altering surface charge through different protonation behaviors of the linkages. Zeta potential measurements reveal that the amide‐linked COF, due to its lower basicity, is deprotonated and negatively charged in the presence of ascorbic acid, while the imine‐linked COF is protonated and positively charged. This electrostatic contrast drives the photoreduction of [PtCl 6 ] 2 ⁻ to Pt, with the imine‐linked COF yielding uniformly distributed small Pt particles (1–2 nm), whereas the amide‐linked COF forms larger Pt particles (up to 100 nm). The amide‐linked COF, acting as an antenna that facilitates interdomain electron transport along COF agglomerates, promotes both Pt growth and subsequent proton reduction demonstrating a 300% increase in photocatalytic HER rate compared to its imine form. This work introduces surface charge modulation as a novel tool for controlling photocatalytic processes in COF‐based systems expanding the COF functionality in photocatalysis.
- 9 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (20) , 16992-17001
Oriented Naphthalene-O-propylammonium-Based (NOP)4AuBIIII8 (B = Au, Bi, Sb) Ruddlesden–Popper Two-Dimensional Gold Double Perovskite Thin Films Featuring High Charge-Carrier Mobility
Two-dimensional perovskites show intriguing optoelectronic properties due to their anisotropic structure and multiple quantum well structure. Here, we report the first three gold-based Ruddlesden-Popper type two-dimensional double perovskites with a general formula (NOP)4AuIBIIII8 (B = Au, Bi, Sb) employing naphthalene-O-propylammonium (NOP) as an organic cation. They were found to form highly crystalline thin films on various substrates, predominantly oriented in the [001] direction featuring continuous, crack-free film areas on the μm2 scale. The thin films show strong optical absorption in the visible region, with band gap energies between 1.48 and 2.32 eV. Density functional theory calculations support the experimentally obtained band gap energies and predict high charge-carrier mobilities and effective charge separation. A comprehensive study with time-resolved microwave conductivity (TRMC) and optical-pump-THz-probe (OPTP) spectroscopy revealed high charge-carrier mobilities for lead-free two-dimensional perovskites of 4.0 ± 0.2 cm2(V s)-1 and charge-carrier lifetimes in the range of μs. Photoconductivity measurements under 1 sun illumination demonstrated the material's application as a photodetector, showing a 2-fold increase in conductivity when exposed to light.
- 9 May 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (20) , 16992-17001
Oriented Naphthalene-O-propylammonium-Based (NOP)4AuBIIII8 (B = Au, Bi, Sb) Ruddlesden–Popper Two-Dimensional Gold Double Perovskite Thin Films Featuring High Charge-Carrier Mobility
Two-dimensional perovskites show intriguing optoelectronic properties due to their anisotropic structure and multiple quantum well structure. Here, we report the first three gold-based Ruddlesden-Popper type two-dimensional double perovskites with a general formula (NOP)4AuIBIIII8 (B = Au, Bi, Sb) employing naphthalene-O-propylammonium (NOP) as an organic cation. They were found to form highly crystalline thin films on various substrates, predominantly oriented in the [001] direction featuring continuous, crack-free film areas on the μm2 scale. The thin films show strong optical absorption in the visible region, with band gap energies between 1.48 and 2.32 eV. Density functional theory calculations support the experimentally obtained band gap energies and predict high charge-carrier mobilities and effective charge separation. A comprehensive study with time-resolved microwave conductivity (TRMC) and optical-pump-THz-probe (OPTP) spectroscopy revealed high charge-carrier mobilities for lead-free two-dimensional perovskites of 4.0 ± 0.2 cm2(V s)-1 and charge-carrier lifetimes in the range of μs. Photoconductivity measurements under 1 sun illumination demonstrated the material's application as a photodetector, showing a 2-fold increase in conductivity when exposed to light.