Vilmos V. Simon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Latest Publications
- 13 April 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 224
Influence of tooth surface modifications on the tribo-dynamic behavior of hypoid gears
- 13 April 2026
- Published by Elsevier in Mechanism and Machine Theory
- Vol. 224
Influence of tooth surface modifications on the tribo-dynamic behavior of hypoid gears
- 6 December 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 235 (6-7) , 1120-1130
Multi-objective optimization of the manufacture of face-milled hypoid gears on numerical controlled machine tool
A new method is presented for advanced manufacture of hypoid gears on numerical controlled machine tool. The tool geometry and machine tool settings are determined to introduce the optimal tooth modifications into the teeth of hypoid gears. The goal is to reduce the maximum tooth contact stresses, angular displacement error of the driven gear, and energy losses in the oil film existing between tooth surfaces. The calculation is based on the optimal variation of machine tool settings on the classical machine tool for hypoid gear manufacture. The novelty of the method is that during the machining process of teeth surfaces, the variation of machine tool settings on the cradle-type hypoid generator is conducted by polynomial functions of fifth-order. By an algorithm, this variation of machine tool settings is transferred to the numerical controlled machine tool for hypoid gear manufacture (hypoid generator). The obtained results have shown that by applying the optimal manufacture process, considerable reductions in tooth contact stresses and angular displacement errors of the driven gear, and a moderate reduction in energy losses were obtained. Therefore, by applying this new method in practice, advanced manufacture of hypoid gears on CNC hypoid generator is made possible, resulting improved operating characteristics of the hypoid gear pair.
- 6 December 2020
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 235 (6-7) , 1120-1130
Multi-objective optimization of the manufacture of face-milled hypoid gears on numerical controlled machine tool
A new method is presented for advanced manufacture of hypoid gears on numerical controlled machine tool. The tool geometry and machine tool settings are determined to introduce the optimal tooth modifications into the teeth of hypoid gears. The goal is to reduce the maximum tooth contact stresses, angular displacement error of the driven gear, and energy losses in the oil film existing between tooth surfaces. The calculation is based on the optimal variation of machine tool settings on the classical machine tool for hypoid gear manufacture. The novelty of the method is that during the machining process of teeth surfaces, the variation of machine tool settings on the cradle-type hypoid generator is conducted by polynomial functions of fifth-order. By an algorithm, this variation of machine tool settings is transferred to the numerical controlled machine tool for hypoid gear manufacture (hypoid generator). The obtained results have shown that by applying the optimal manufacture process, considerable reductions in tooth contact stresses and angular displacement errors of the driven gear, and a moderate reduction in energy losses were obtained. Therefore, by applying this new method in practice, advanced manufacture of hypoid gears on CNC hypoid generator is made possible, resulting improved operating characteristics of the hypoid gear pair.
- 14 June 2019
- Published by Springer Nature
- p. 905-914
Multi-Objective Optimization of Hypoid Gears to Improve Operating Characteristics
- 14 June 2019
- Published by Springer Nature
- p. 905-914
Multi-Objective Optimization of Hypoid Gears to Improve Operating Characteristics
- 27 March 2018
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 40 (4) , 210
Improvements in the micro tooth surface topography of hobbed spur and helical gears
- 27 March 2018
- Published by Springer Nature in Journal of the Brazilian Society of Mechanical Sciences and Engineering
- Vol. 40 (4) , 210
Improvements in the micro tooth surface topography of hobbed spur and helical gears
- 17 May 2016
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 88 (5-8) , 1579-1594
Optimal machine tool settings for face-hobbed hypoid gears manufactured on CNC hypoid generator
- 17 May 2016
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 88 (5-8) , 1579-1594
Optimal machine tool settings for face-hobbed hypoid gears manufactured on CNC hypoid generator
- 2 June 2014
- Published by Wiley in Journal of Mechanical Design
- Vol. 136 (8) , 081004
Optimal Machine-Tool Settings for the Manufacture of Face-Hobbed Spiral Bevel Gears
In this study, an optimization methodology is proposed to systematically define the optimal head-cutter geometry and machine-tool settings to simultaneously minimize the tooth contact pressure and angular displacement error of the driven gear (the transmission error), and to reduce the sensitivity of face-hobbed spiral bevel gears to the misalignments. The proposed optimization procedure relies heavily on the loaded tooth contact analysis for the prediction of tooth contact pressure distribution and transmission errors influenced by the misalignments inherent in the gear pair. The load distribution and transmission error calculation method employed in this study were developed by the author of this paper. The targeted optimization problem is a nonlinear constrained optimization problem, belonging to the framework of nonlinear programming. In addition, the objective function and the constraints are not available analytically, but they are computable, i.e., they exist numerically through the loaded tooth contact analysis. For these reasons, a nonderivative method is selected to solve this particular optimization problem. That is the reason that the core algorithm of the proposed nonlinear programming procedure is based on a direct search method. The Hooke and Jeeves pattern search method is applied. The effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. Drastic reductions in the maximum tooth contact pressure (62%) and in the transmission errors (70%) were obtained.
- 2 June 2014
- Published by Wiley in Journal of Mechanical Design
- Vol. 136 (8) , 081004
Optimal Machine-Tool Settings for the Manufacture of Face-Hobbed Spiral Bevel Gears
In this study, an optimization methodology is proposed to systematically define the optimal head-cutter geometry and machine-tool settings to simultaneously minimize the tooth contact pressure and angular displacement error of the driven gear (the transmission error), and to reduce the sensitivity of face-hobbed spiral bevel gears to the misalignments. The proposed optimization procedure relies heavily on the loaded tooth contact analysis for the prediction of tooth contact pressure distribution and transmission errors influenced by the misalignments inherent in the gear pair. The load distribution and transmission error calculation method employed in this study were developed by the author of this paper. The targeted optimization problem is a nonlinear constrained optimization problem, belonging to the framework of nonlinear programming. In addition, the objective function and the constraints are not available analytically, but they are computable, i.e., they exist numerically through the loaded tooth contact analysis. For these reasons, a nonderivative method is selected to solve this particular optimization problem. That is the reason that the core algorithm of the proposed nonlinear programming procedure is based on a direct search method. The Hooke and Jeeves pattern search method is applied. The effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. Drastic reductions in the maximum tooth contact pressure (62%) and in the transmission errors (70%) were obtained.
- 28 April 2014
- Published by Wiley in Journal of Mechanical Design
- Vol. 136 (7) , 071007
Optimal Tooth Modifications in Face-Hobbed Spiral Bevel Gears to Reduce the Influence of Misalignments on Elastohydrodynamic Lubrication
In this study, an optimization methodology is proposed to systematically define the optimal tooth modifications introduced by head-cutter geometry and machine-tool settings to minimize the influence of misalignments on the elastohydrodynamic (EHD) lubrication characteristics in face-hobbed spiral bevel gears. The goal is to simultaneously maximize the EHD load-carrying capacity of the oil film and to minimize power losses in the oil film when different misalignments are inherent in the gear pair. The proposed optimization procedure relies heavily on the EHD lubrication analysis developed in this paper. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. A drastic increase in the EHD load-carrying capacity of the oil film and a reduction in the power losses in the oil film were obtained.
- 28 April 2014
- Published by Wiley in Journal of Mechanical Design
- Vol. 136 (7) , 071007
Optimal Tooth Modifications in Face-Hobbed Spiral Bevel Gears to Reduce the Influence of Misalignments on Elastohydrodynamic Lubrication
In this study, an optimization methodology is proposed to systematically define the optimal tooth modifications introduced by head-cutter geometry and machine-tool settings to minimize the influence of misalignments on the elastohydrodynamic (EHD) lubrication characteristics in face-hobbed spiral bevel gears. The goal is to simultaneously maximize the EHD load-carrying capacity of the oil film and to minimize power losses in the oil film when different misalignments are inherent in the gear pair. The proposed optimization procedure relies heavily on the EHD lubrication analysis developed in this paper. The core algorithm of the proposed nonlinear programming procedure is based on a direct search method. Effectiveness of this optimization was demonstrated on a face-hobbed spiral bevel gear example. A drastic increase in the EHD load-carrying capacity of the oil film and a reduction in the power losses in the oil film were obtained.
- 26 March 2014
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 136 (3) , 031008
Manufacture of Optimized Face-Hobbed Spiral Bevel Gears on Computer Numerical Control Hypoid Generator
In this study, a method is proposed for the advanced manufacture of face-hobbed spiral bevel gears on CNC hypoid generators with optimized tooth surface geometry. An optimization methodology is applied to systematically define optimal head-cutter geometry and machine tool settings to introduce optimal tooth modifications. The goal of the optimization is to simultaneously minimize tooth contact pressures and angular displacement error of the driven gear (the transmission error). The optimization is based on machine tool setting variation on the cradle-type generator conducted by optimal polynomial functions. An algorithm is developed for the execution of motions on the CNC hypoid generator using the relations on the cradle-type machine. Effectiveness of the method was demonstrated by using a face-hobbed spiral bevel gear example. Significant reductions in the maximum tooth contact pressure and in the transmission errors were obtained.
- 26 March 2014
- Published by ASME International in Journal of Manufacturing Science and Engineering
- Vol. 136 (3) , 031008
Manufacture of Optimized Face-Hobbed Spiral Bevel Gears on Computer Numerical Control Hypoid Generator
In this study, a method is proposed for the advanced manufacture of face-hobbed spiral bevel gears on CNC hypoid generators with optimized tooth surface geometry. An optimization methodology is applied to systematically define optimal head-cutter geometry and machine tool settings to introduce optimal tooth modifications. The goal of the optimization is to simultaneously minimize tooth contact pressures and angular displacement error of the driven gear (the transmission error). The optimization is based on machine tool setting variation on the cradle-type generator conducted by optimal polynomial functions. An algorithm is developed for the execution of motions on the CNC hypoid generator using the relations on the cradle-type machine. Effectiveness of the method was demonstrated by using a face-hobbed spiral bevel gear example. Significant reductions in the maximum tooth contact pressure and in the transmission errors were obtained.
- 1 December 2011
- Published by Wiley in Journal of Mechanical Design
- Vol. 133 (12) , 121003
Generation of Hypoid Gears on CNC Hypoid Generator
In this study, polynomial functions of orders up to five are applied to induce variations in the cradle radial setting and the velocity ratio in the kinematic scheme of the machine tool for the generation of the pinion tooth surfaces corresponding to reduced transmission error amplitudes of a hypoid gear pair. The new CNC hypoid generators have made it possible to perform this nonlinear correction motions for the cutting of the face-milled hypoid gears. An algorithm is developed for the execution of motions on the CNC hypoid generator for the generation of face-milled hypoid gear tooth surface, based on the machine tool setting variation on the cradle-type hypoid generator induced by the optimal polynomial functions up to fifth-order. By using the corresponding computer program, the motion graphs of the CNC hypoid generator are determined for the generation of hypoid gear tooth surface, based on the optimal variation in the velocity ratio in the kinematic scheme and on the variation in the cradle radial setting on a cradle-type generator. The results presented indicate that the variation of the velocity ratio in the kinematic scheme of the hypoid generator induced by a fifth-order polynomial function resulted in a 62% reduction of the maximum transmission error of the gear pair.
- 1 December 2011
- Published by Wiley in Journal of Mechanical Design
- Vol. 133 (12) , 121003
Generation of Hypoid Gears on CNC Hypoid Generator
In this study, polynomial functions of orders up to five are applied to induce variations in the cradle radial setting and the velocity ratio in the kinematic scheme of the machine tool for the generation of the pinion tooth surfaces corresponding to reduced transmission error amplitudes of a hypoid gear pair. The new CNC hypoid generators have made it possible to perform this nonlinear correction motions for the cutting of the face-milled hypoid gears. An algorithm is developed for the execution of motions on the CNC hypoid generator for the generation of face-milled hypoid gear tooth surface, based on the machine tool setting variation on the cradle-type hypoid generator induced by the optimal polynomial functions up to fifth-order. By using the corresponding computer program, the motion graphs of the CNC hypoid generator are determined for the generation of hypoid gear tooth surface, based on the optimal variation in the velocity ratio in the kinematic scheme and on the variation in the cradle radial setting on a cradle-type generator. The results presented indicate that the variation of the velocity ratio in the kinematic scheme of the hypoid generator induced by a fifth-order polynomial function resulted in a 62% reduction of the maximum transmission error of the gear pair.
- 1 March 2010
- Published by Wiley in Journal of Mechanical Design
- Vol. 132 (3) , 031001
Advanced Manufacture of Spiral Bevel Gears on CNC Hypoid Generating Machine
An algorithm is developed for the execution of motions on the computer numerical control (CNC) hypoid generating machine using the relations on the cradle-type machine. The algorithm is based on the condition that, since the tool is a rotary surface and the pinion/gear blank is also related to a rotary surface, it is necessary to ensure the same relative position of the head cutter and the pinion on both machines. The algorithm is applied for the execution of motions on the CNC hypoid generator for the manufacture of spiral bevel gears, based on the machine tool setting variation on the cradle-type hypoid generator conducted by optimal polynomial functions up to the fifth-order. By using the corresponding computer program, the motion graphs of the CNC hypoid generator are determined for the manufacture of spiral bevel gears, based on the optimal variation in the velocity ratio in the kinematic scheme and on the variation in the cradle radial setting on a cradle-type generator.
- 1 March 2010
- Published by Wiley in Journal of Mechanical Design
- Vol. 132 (3) , 031001
Advanced Manufacture of Spiral Bevel Gears on CNC Hypoid Generating Machine
An algorithm is developed for the execution of motions on the computer numerical control (CNC) hypoid generating machine using the relations on the cradle-type machine. The algorithm is based on the condition that, since the tool is a rotary surface and the pinion/gear blank is also related to a rotary surface, it is necessary to ensure the same relative position of the head cutter and the pinion on both machines. The algorithm is applied for the execution of motions on the CNC hypoid generator for the manufacture of spiral bevel gears, based on the machine tool setting variation on the cradle-type hypoid generator conducted by optimal polynomial functions up to the fifth-order. By using the corresponding computer program, the motion graphs of the CNC hypoid generator are determined for the manufacture of spiral bevel gears, based on the optimal variation in the velocity ratio in the kinematic scheme and on the variation in the cradle radial setting on a cradle-type generator.