JAJoanna Aizenberg

Joanna Aizenberg

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Recognitions

Top Cited Scholar (2025)

Joanna Aizenberg has a total of 596 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Interlayer Mobility Control of 2D-Layered Crystals for Delamination of Nanosheets

    by Jae Hyo Han, Jongseong Park, Changhee Lee, Chul Ho Jun, Michael Aizenberg, Joanna Aizenberg, Dominik Lungerich, Jinwoo Cheon

    To maintain consistent properties of delaminated two-dimensional nanosheets, mild methods to preserve large lateral sizes and crystallinity during the delamination of bulk crystals are desired. This study introduces a gentle, solution-based on-substrate delamination strategy that avoids forming colloidal free-standing nanosheets by postponing the delamination process until the materials are deposited on the substrate, thereby preventing physical fragmentation in solution. By comparing cone-type and cylinder-type molecular intercalates (oleylamine and hexadecylamine), we identify interlayer mobility as a governing parameter for delamination in intercalation-accessible layered crystals, eliminating the need for external energy input such as sonication. Operando microscopic analyses reveal the importance of the gas–liquid interface during the evaporation process of drop-cast samples, which induces shear forces necessary for delamination. Application to a range of layered oxides and chalcogenides (HNb3O8, HTaMoO6, HTiNbO5, MoO3, V2O5, and TiS2) illustrates the transferability of this working principle across chemically distinct layered materials sharing sufficient interlayer adaptability. These proof-of-concept findings demonstrate that controlling interlayer mobility through molecular engineering provides an alternative route to producing large-area, high-quality 2D nanosheets.

  • Open Access

    Fish-Inspired Nanostructured Lubricated Surfaces Enhance Aquatic Locomotion

    by Jack Alvarenga, Mughees Khan, Patrick J. M. Thornycroft, Dylan K. Wainwright, Li Wen, Erik J. Anderson, Philseok Kim, George V. Lauder, Joanna Aizenberg

    Slippery, mucus-coated body surfaces are widespread in aquatic vertebrates, but their contribution to locomotion is unclear. Fish mucus has long been proposed to reduce drag, yet direct experimental evidence of a swimming benefit is limited. A series of four mucus-inspired, lubricant-infused aluminum substrates incorporating SLIPS (slippery liquid-infused porous surfaces) were fabricated to assess the effects of a slippery coating on motion under both static (drag-based) and dynamic (propulsive) conditions. The aluminum substrates were textured by conversion of the surface to nanostructured aluminum oxyhydroxide (boehmite), chemically functionalized, and infused with synthetic Newtonian liquids spanning the viscosity range of measured trout mucus and compared to that of unstructured and lubricant-free controls. Viscosity measurements were also performed on skin mucus collected from brook trout (S. fontinalis). SLIPS-coated surfaces were found to reduce the static drag by up to 9.1% and enhance the lift-to-drag ratio by up to 8.7%. Furthermore, SLIPS coatings improved both the thrust and efficiency of flapping plates actuated in heave and pitch by up to 3.6% and 4.1%, respectively, with performance improvements observed over a broad range of motion parameters, lubricant chemistries, and viscosities. Boundary layer flow measurements over a flat plate revealed that SLIPS experienced a reduced skin friction drag of up to 5.2% under laminar flow conditions. Nanostructured, functionalized, lubricated coatings thus act both to reduce drag and to enhance the propulsive thrust and efficiency of fishlike propulsion, providing one explanation for the presence of such structures on a diversity of animal surfaces.

  • Open Access

    Indoor thermoregulatory homeostasis using hydrodynamic instability

    by Raphael Kay, Ross J. Cocks, Charles Katrycz, J. Alstan Jakubiec, Atalaya Milan Wilborn, Rafiq Omair, Joanna Aizenberg, Benjamin D. Hatton

    Branching patterns can emerge when one fluid is injected into a more viscous one within a quasi-two-dimensional cavity. While these patterns have dazzled physicists for decades, modern engineering efforts have focused on suppressing, rather than leveraging, these flow instabilities. Here, by designing fluidic devices with calibrated geometries, liquid absorptivities, and rheology, we exploit the thermal sensitivity of the Saffman–Taylor instability to achieve thermoregulatory shading systems with self-adjustment capabilities. Our devices produce negative feedback branching patterns that reduce indoor solar heating when warm but increase it when cool. Moreover, compared to existing temperature-responsive shading approaches with fixed thermal behaviors, our system can switch its thermal sensitivity and indoor temperature setpoints on-demand by adjusting the rate that patterns are grown. Experiments and models reveal the energy savings and indoor climate control capabilities enabled by this thermoregulatory framework. Overall, our work provides a blueprint for designing materials with self-regulatory behaviors based on flow instabilities.

  • Open Access

    Liquid crystal predictor: a machine learning platform for classification and phase transition forecast

    by Haichao Wu, Haritosh Patel, Yu Xiang, Ning Dai, Jacopo Movilli, Hamed Almohammadi, Boris Kozinsky, Joanna Aizenberg


  • Open Access

    Rotational 3D printing of active–passive filaments and lattices with programmable shape morphing

    by Mustafa K. Abdelrahman, Jackson K. Wilt, Yeonsu Jung, Rodrigo Telles, Gurminder K. Paink, Natalie M. Larson, Joanna Aizenberg, L. Mahadevan, Jennifer A. Lewis

    Natural filaments, such as proteins, plant tendrils, octopus tentacles, and elephant trunks, can transform into arbitrary three-dimensional shapes that carry out vital functions. Their shape-morphing behavior arises from intricate patterning of active and passive regions, which are difficult to replicate in synthetic matter. Here, we introduce a filament-centric strategy for programmable shape morphing in which intrinsic curvature and twist are directly encoded within multimaterial elastomeric filaments during fabrication. By harnessing rotational multimaterial 3D printing, we directly prescribe the filament’s natural curvature–twist field κ(s) through controlled material distribution and helical liquid crystal mesogen alignment. When heated above their nematic-to-isotropic transition temperature ( T NI ), the helically aligned liquid crystal elastomer regions contract along their local director field, while passive regions remain essentially unchanged. This approach enables independent control of bending and torsion at every cross-section along the filament centerline: the principal natural curvatures of the filament along two orthogonal axes as well as the local twist. Next, we printed architected lattices composed of unit cells formed by sinusoidal filaments that either reversibly contract, expand, or exhibit out-of-plane deformations. Discrete elastic rod simulations of Janus filaments with different natural curvatures and twist, which are interconnected within the printed lattices, allow accurate prediction of their observed shape-morphing behavior. By integrating active–passive elastomers, additive manufacturing, and computational modeling, we have created shape-morphing matter with complex programmable responses for applications that rely on adaptive, robotic, or deployable architectures.


  • Open Access

    Self-regulated dual-mode solar energy harvesting

    by Raphael Kay, Rafiq Omair, Joanna Aizenberg

    Traditional solar energy harvesters are single-mode—typically designed to convert available sunlight either into heat or electricity. However, neither energy form is continuously useful, and an optimal variant should instead be capable of autonomously toggling relative thermal and electrical yield based on need. Here, we introduce passive, dual-mode indoor solar energy harvesting by using a fluid layer trapped above a Fresnel lens as a phase-changing switch within a solar waveguide. When warm out and electricity is desired, the fluid is in its vapor phase, causing a refractive index difference with the microstructured lens beneath it to concentrate sunlight toward a solar cell. When cold out and heat is instead desired, the fluid condenses atop the Fresnel structure to reduce refractive index differences, causing sunlight to refract past the solar cell and convert to heat when absorbed indoors. Using water as a phase-changing switch, we built an exemplary system that self-regulates indoor temperature and solar cell light exposure over ambient heating and cooling cycles. Our approach is general across everyday materials and manufacturing methods and may be deployed on the surfaces of vehicles, greenhouses, and residential or commercial buildings.


  • Highly Selective Enteric Methane Monitoring Through Modular Sensor‐Filter Assembly

    by Haritosh Patel, Owen Gibbs, Ethan A. Ye, Jacopo Movilli, Jack Alvarenga, Venkatesh N. Murthy, Joanna Aizenberg

    Accurate quantification of enteric methane emissions is essential for mitigating greenhouse gas outputs from livestock. However, existing methods such as respiration chambers and tracer gas systems remain costly, invasive, and impractical for large‐scale deployment. Here, we present a modular electronic nose (e‐nose) platform that introduces a materials‐informed sensor–filter framework for selective methane detection in complex gas environments relevant to livestock monitoring. The system integrates three modules: an environmental unit for temperature, humidity, and carbon dioxide tracking; a volatile organic compound module; and a methane‐selective unit comprising a metal oxide sensor with a dual‐layer adsorbent filter made of activated carbon spheres and a polyethylene terephthalate (PET) membrane. This hybrid, dual‐layer adsorptive filter enables a sensor–filter codesign strategy that suppresses both polar and non‐polar interferents while preserving methane transport, shifting the dominant selectivity mechanism from surface oxygen competitive depletion to diffusion‐mediated filtering. The methane‐selective sensor exhibited a strong signal‐to‐noise ratio (33.9 dB), low detection limit (7.8 ppm), and excellent linearity (R 2 = 0.999). In methane–pentane mixtures (20–1000 ppm), the filtered sensor maintained low error (∼13%), over 100‐fold lower than unfiltered counterparts. Controlled interferent studies elucidated how filters influence selectivity, offering a framework for designing sensor–filter pairs tailored to complex gas environments. Integrated with environmental compensation, this materials‐informed, ear‐tag‐shaped e‐nose establishes a deployment‐oriented framework for scalable, non‐invasive methane monitoring in livestock‐relevant environments.


  • Directing Growth of Compact Spherulites from Spherical to Complex Morphologies

    by Ariane V. Mader, Laura Folkertsma, Lars Sonneveld, Marius Schöttle, Christiaan van Campenhout, René M. Williams, Bruno Ehrler, Noushine Shahidzadeh, Joanna Aizenberg, Willem L. Noorduin


  • Open Access

    Unusual Swelling Behavior of Hydrogels Modified with Spiropyran as Appendage or Crosslinker

    by Michael M. Lerch, Ankita Shastri, Thomas B. H. Schroeder, Amos Meeks, Shucong Li, Anna V. Shneidman, Michael Aizenberg, Joanna Aizenberg

    Stimuli‐responsive materials typically contain responsive molecular units that couple an external trigger to a defined macroscale response. Ongoing efforts to boost the versatility and complexity of these responses increasingly focus on multi‐stimuli‐responsive molecular units and crosslinkers, as these bear the potential to impart self‐regulatory behaviors building on cooperative effects and feedback mechanisms. Herein, such a stimuli‐responsive platform consisting of polyacrylamide‐based hydrogels with spiropyrans covalently bound as pendant groups or ‘non‐innocent’ crosslinkers is studied. Surprisingly, as compared to methylenebisacrylamide‐crosslinked poly(acrylamide‐ co ‐acrylic acid) gels incorporating monofunctional appended spiropyran, gels with bifunctional spiropyran as a secondary crosslinker swell up to twofold larger despite their increased crosslinking density. To uncover the origin of this unexpected behavior, we employ nanoindentation, swelling analysis, and UV–vis spectroscopy to study changes in mechanical properties and in spiropyran isomer equilibrium distribution as a function of solution pH, co‐monomer chemistry, and swelling‐induced polymer strain. The osmotic counterion pressures as a function of spiropyran isomer distribution were estimated but found to be insufficient to explain the observed behavior. The combined effects of (i) charge complexation, (ii) cooperativity between the hydrogel's mechanics and chemistry, and (iii) formation of aggregates may all be invoked to explain features of the observed ‘non‐innocence’ of spiropyran crosslinkers. Taken together, these insights aid rational implementation of such responsive crosslinkers in materials design and extend the functionality of existing polymeric materials toward more complex tunable behaviors, useful in soft robotics, microfluidics, drug delivery, or self‐regulated materials.


  • Raspberry-Colloid-Templated Catalysts as a Versatile and Stable Thermocatalytic Platform

    by Kang Rui Garrick Lim, Michael Aizenberg, Joanna Aizenberg

    ConspectusNanoparticle (NP)-supported catalysts are critical to the production of over 90% of the chemicals and raw materials used today. Their catalytic performance is predicated on a combination of geometric and electronic descriptors associated with the properties of the NPs, the support, and the interactions between them. However, existing catalyst preparative methods of nucleating or immobilizing NPs on support surfaces do not permit independent variation of either NP or support properties, as NP nucleation and growth characteristics are dependent on the support chemistry and vice versa. Consequently, such interconnected material properties cannot enable systematic investigations whereby individual NP or support properties are independently tuned to elucidate the catalytic role(s) of each structural or chemical descriptor or their combination thereof, especially if their contributions exert orthogonal effects on the catalytic performance.To address this gap, we devised a raspberry-colloid-templating (RCT) strategy. In this Account, we outline the RCT synthetic methodology and highlight two key design features: partial NP embedding into the support (which enhances catalytic stability against NP sintering while maintaining high reactant accessibility) and synthetic modularity (which enables independent combinatorial variations of the catalyst's building blocks and their spatial organization). These two features yield thermomechanically stable RCT catalysts with multiple degrees of freedom at different length scales to isolate and independently tune potential catalytic descriptors, thereby deriving unambiguous structure-property relationships to guide future catalyst designs.We describe how we leveraged these two key design features to employ the RCT strategy as a well-defined and synthetically robust model thermocatalytic platform to deconvolute the individual effects of traditionally coupled structural descriptors and elucidate important insights into catalyst design that cannot be easily achieved using conventional catalyst preparative methods. We highlight our recent investigations into three structural features found in all NP-supported catalysts: individual NP properties, properties of NP ensembles as a collective entity, and NP-support interfaces. First, we show how using preformed colloidal NPs in the RCT method decouples the NP and support formation steps to facilitate systematic evaluations of individual NP properties. We exemplify this point through separate studies into the nanoscale effects of Pd ensemble sizes on the surfaces of PdAu alloyed NPs on reactant adsorption energetics, and the sintering behavior of Pt and Pd NP diesel oxidation catalysts. Second, we demonstrate how the colloidal templating steps in the RCT strategy control the NP spatial localization to tune NP proximity, a collective NP ensemble property, at a fixed NP size, to induce local enrichment of reaction intermediates within the pore structure to direct catalytic selectivity. Third, we illustrate how partial embedding of NPs in RCT catalysts not only accentuates catalytic contributions arising from NP-support interfacial sites but also reveals nanoscale wetting effects at the interface that we exploited to direct bimetallic catalyst synthesis. Interspersed throughout this Account, we also describe the advanced characterization and modeling tools that we adapted to probe the RCT catalyst structure and establish structural insights underpinning some of our main results. Finally, we provide an outlook on the RCT catalyst platform and speculate on its future opportunities, challenges, and practical applications.