SSSerhii Skipochka

Serhii Skipochka

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Serhii Skipochka has a total of 21 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study of stability of rocks beyond their strength limit under external local influences

    by Serhii Skipochka, Oleksandr Krukovskyi, Serhii Musiienko, Viktor Serhiienko

    Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.

  • Classification and rating of the main factors influenced on the mine working stability in uranium mines

    by Serhii Skipochka, Oleksandr Krukovskyi, Viktor Serhiienko

    Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.

  • Recommendations for the use of underground dual-use structures in Ukrainian realities

    by M.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine, Serhii Skipochka, Viktor Serhiienko, Serhii Musienko, Liliia Prokhorets

    The purpose of the work is to perform an analysis of the world experience of multi-purpose use of underground structures and to provide recommendations on monitoring the technical condition and technology of repair and restoration works of underground and buried dual-use objects for their operation in the conditions of Ukrainian realities. The main areas of use of underground structures for additional purposes are considered. In particular, for the equipment of warehouses, isothermal factories, specialized research laboratories, medical institutions with special conditions, tourist facilities. Under martial law, underground facilities are also used to shelter civilians, organize the production of defense products, hold mass cultural events, and create first aid stations for victims. There are two main categories of dual-use underground structures. The first one includes mining workings in the abandoned areas of mines. The main requirements for the workings are a large cross-section, satisfactory natural stability, the absence of harmful gases in the mine atmosphere, and the absence of the threat of flooding. It is desirable to be able to drive vehicles from the earth's surface directly to the required object. These requirements are implemented mainly in mines for the extraction of non-metallic building materials. The second category includes underground hydraulic structures, transport tunnels, basements of industrial enterprises and residential buildings. The main requirements for the performance of additional functions are the provision of full operation of the building for its primary purpose and the creation of safe conditions for people without special knowledge and skills. To assess the possibility of expanding the operational capabilities of underground structures, a methodology for their survey has been developed. The methodology involves a visual assessment of the state of rock exposures and fasteners, determination of the strength of rocks and concrete mainly using non-destructive control methods, detection of cavities behind the shell of an underground structure using the vibroacoustic method. In some cases, control drilling is performed. The presence of people without personal protective equipment in the dual-use underground structure places higher requirements on the stability of structures. To increase the stability of the mine workings, additional fixing of the roof of the workings with anchors, application of shotcrete on rock outcrops and the surface of the destroyed support, creation of canopies in areas where people are concentrated are provided. Increasing the stability of underground structures, which are not related to the extraction of minerals, is achieved by strengthening and installing additional load-bearing structures. To improve the waterproofing of the underground structure, it is recommended to fill the cavities behind the shell, eliminate filtering fractures, repair the seams between the sections of support, and apply a penetrating coating.


  • SCIENCE AND PRACTICE FOR ASSESSING THE STATE OF UNDERGROUND STRUCTURES SUPPORT BY VIBROACOUSTIC METHOD

    by Oleksandr Krukovsky, Serhii Skipochka, Viktor Serhiienko, Tetiana Palamarchuk

    In this work, subject of the research is a method of non-destructive vibroacoustic control of underground structures support. The purpose of the research was to create a methodology and apparatus for vibroacoustic control of the state of the system "support – rock massif" with a wide range of use. The main types of objects where the use of this method is appropriate are determined. Negative influence of external factors on performance characteristics of support is shown. A basic type of support for underground objects is reinforced concrete. It is established that the most characteristic defects are formation of cavities in geological environment behind the support and broken connection of separate segments of the support. The influence of these defects on character of free oscillations of support elements at single shock action was studied theoretically. It is established that the following parameters can be informative for detecting these defects: amplitude characteristic of package of vibration, its duration and spectral composition. Information about the means of vibroacoustic control designed by the Institute with participation of the authors is provided. The methodical features of using vibroacoustic control for assessing technical state of different types of support are considered. The limitations for using the method are explained. Some results of the use of vibroacoustic control of support in underground objects of the various purposes are given.


  • Research of strength and features of deformations of rocks in uranium deposits

    by Serhii Skipochka, M.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine, Oleksandr Krukovskyi, Viktor Serhiienko, Yurii Bulich

    Оффициальный сайт сборника научных трудов "Геотехническая механика", ИГТМ НАН Украины Official site Collected Scientific Papers “Geo-Technical Mechanics” (the Journal) is issued by the M.S. Polyakov Institute of Geotechnical Mechanics under the National Academy of Science of Ukraine.


  • The concept of risk-based technical solutions for the protection of ore and non-ore mine workings

    by M.S. Poliakov Institute of Geotechnical Mechanics of the National Academy of Sciences of Ukraine, Serhii Skipochka, Oleksandr Krukovskyi, Viktor Serhiienko

    The subject of the research presented in the article is the fastening and protection of mine workings for the extraction of ore and non-ore minerals for the construction industry. The purpose of the work is the development of the concept of risk-oriented technical and technological solutions for the protection of underground mine workings to dramatically increase the efficiency and safety of extraction of ore and non-ore minerals at deposits of a complex structure. The work uses the well-known mixed method of risk assessment, which assumes that underground mining production is accompanied by three main interrelated indicators: occupational safety of miners, environmental safety, and financial and economic risks. The method involves building a matrix of consequences and probabilities by ranking them. The technical-technological solutions for fastening and protection of workings of iron ore and uranium mines and underground enterprises for the extraction of non-metallic raw materials are analyzed. Their shortcomings are identified and the associated risks of operation and long-term preservation of underground enterprises are assessed. The concept of technical and technological solutions for improving the safety, environmental and economic performance of mines is proposed, which should be the basis of the new regulatory and technical documentation for the protection of workings. In particular, for ore mines, this concerns the transition to new technologies of anchorage, special conditions for lining junctions, introduction of bookmarks in particularly dangerous areas, control and reduction of water inflows. For mines producing non-metallic raw materials, the effectiveness of a complete transition from drilling and blasting technology to a mining machinermed one has been practically. If there are thick seams, it is recommended to work them out in separate layers, leaving a gap between them. It is advisable to divide the zones of geological disturbances into small areas, which are outlined with barrier pillars. Emphasis is placed on the mandatory implementation of comprehensive monitoring of the condition of the roof of the structures and their lining on the active and decommissioned areas. Depending on the degree of risk of collapse in large-scale mine workings and its impact on ground objects, the feasibility of using stowing is determined. Research results can be used to implement measures to improve miners' labor safety, environmental safety, and economic performance of ore and non-ore mines.


  • Interaction of rock-bolt supports while weak rock reinforcing by means of injection rock bolts

    by Oleksandr Krykovskyi, Viktoriia Krykovska, Serhii Skipochka

    Purpose is to analyze changes in shape and dimensions of a rock mass area, fortified with the help of a polymer, depending upon the density of injection rock bolts as well as the value of initial permeability of enclosing rocks to substantiate optimum process solutions to support roofs within the unstable rocks and protect mine workings against water inflow and gas emission. Methods. Numerical modeling method for coupled processes of rock mass strain and filtration of liquid components of a polymer has been applied. The model is based upon fundamental ideas of mechanics of solids and filtration theory. The problem has been solved using a finite element method. Its solution took into consideration both the initial permeability and the permeability stipulated by mine working driving, injection time of reagents and their polymerization, and effect of po-lymer foaming in the process of mixing of its components. Changes in physicomechanical and filtration characteristics of rock mass during polymer hardening were simulated. It has been taken into consideration that a metal delivery pipe starts operating as a reinforcing support element only after the polymer hardening. Findings. If three and five injection rock bolts are installed within a mine working section then stresses, permeability coefficients, pressure of liquid polymeric composition, and geometry of the fortified area of rock mass have been calculated. It has been shown that rock bolt location is quite important to form a rock-bolt arch. It has been demonstrated for the assumed conditions that if five injection rock bolts are installed within the mine working roof then close interaction between rock-bolt supports takes place; moreover, the integral arch is formed within the mine working roof. Originality. Dependence of change in the polymer reinforced area upon a value of initial permeability of enclosing rocks has been derived. It has been shown that in terms of low values of initial permeability, geometry of rock-bolt supports as well as its size is identified only by means of a value of the unloaded zone around the mine working. In this context, initial permeabi-lity increase results in the enlarged diameter of the reinforced rock mass area in the neighbourhood of the injection rock bolt. Practical implications. The findings are recommended to be applied while improving a method to support the mine working roof and decrease water inflow as well as gas emission from the rocks, being undermined, into the working.


  • Further improvements of the shock-wave control equipment

    by Serhii Skipochka, Institute of Geotechnical Mechanics named by N. Poljakov of National Academy of Sciences of Ukraine, Victor Serhiienko, Ihor Krasovskyi

    The equipment for operational non-destructive testing by the shock-wave method developed by the Institute for Geotechnical Mechanics under the National Academy of Sciences of Ukraine, was successfully tested in mine conditions and confirmed the results of theoretical and experimental studies on the possibility of using the relaxation time of free oscillations of a metal-polymer anchor to assess the quality of its fastening. At the same time, some drawbacks of the equipment were identified, which can be eliminated by improving both the data processing unit and the sensor part. The areas of improvements, considered in this work, will improve the stability, speed, mobility and ergonomics of the equipment. It is possible to improve the data processing unit by implementing modern 32/64 bit ARM microprocessors with higher computing power and with greater variability of circuitry solutions. It is possible to develop a new circuit based on these microprocessors or to use available mini-solutions based on the ARM core. It will also improve the oscillator-receiver unit, potentially making it completely wireless. For both options, it will be necessary to develop software, which, due to the increased computing power, can be improved with additional algorithms for data processing. The increased speed and a larger number of I/O ports will also allow transferring the functionality of the analog part to the ARM microprocessor, which, in turn, will reduce the board size, and the freed space can be occupied by additional batteries to increase the battery life. The introduction of ARM microprocessors will also allow, thanks to a large number of libraries and circuits for wireless data transmission, the development of anchor vibration sensor with Wi-Fi/Bluetooth data transmission to the processing unit, which, in turn, will increase mobility and ease of use. For maximum ergonomics, it is possible to develop a combined design with an automatic stabilized hammer and oscillation sensor.

  • Open Access

    Technological solutions for mining of off-balance gypsum reserves in difficult geological conditions

    by Serhii Skipochka, Viktor Serhiienko, Volodymyr Amelin, Oleh Sytnichenko, Thibault Faucher

    Mining technological solutions for underground mining of offbalance gypsum reserves in difficult mining and geological conditions were justified. An analysis of typical geological disturbances of gypsum seams is carried out using the Artemivsk deposit (Ukraine) as an example. Physical and mechanical properties of rocks in disturbed zones are determined. A quantitative assessment of strength characteristics of rocks during their moistening is carried out. The minimum permissible values of the width of the tape pillar and the power of the protective stack above the camera in the presence of a violation in the roof are calculated. The use of selective mining of the lower part of the seam by combines of the “Roadheader” type is recommended. The maximum width and height of the chamber are determined by the type of combine. The technology has been tested and realized at the gypsum mine of the Additional Liability Company “Siniat”.