Eduardo Camarillo Abad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Eduardo Camarillo Abad has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Louise C. Hirst
Univ. of Cambridge (United Kingdom)
5 shared publications- Louise Caroline Hirst
Department of Materials Science and Metallurgy, University of Cambridge 1 , Cambridge CB3 0FS, United Kingdom
5 shared publications - Hannah J. Joyce
University of Cambridge
4 shared publications Larkin Sayre
Univ. of Cambridge (United Kingdom)
3 shared publicationsPhoebe Pearce
Univ. of Cambridge (United Kingdom)
2 shared publications- Phoebe Pearce
UNSW Sydney
2 shared publications
Latest Publications
- Open Access
- 20 May 2025
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 290
Radiation-resilient ultra-thin GaAs solar cells on glass transferred by anodic bonding
- 20 May 2025
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 290
Open AccessRadiation-resilient ultra-thin GaAs solar cells on glass transferred by anodic bonding
- Open Access
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Light management for ever-thinner photovoltaics: A tutorial review
Ultra-thin solar cells, an order of magnitude thinner than conventional technologies, are an emerging device concept that enables low-cost, flexible, lightweight, and defect-tolerant photovoltaics. However, the advent of ultra-thin technologies is hindered by the fundamental challenge of poor light harvesting in thinnest absorber layers, which entails prohibitive photocurrent and efficiency penalties. Here, from a tutorial perspective, we review different light-management platforms that can overcome this inherent limitation, namely, antireflection coatings, rear mirrors, and light-trapping textures. We then review the state-of-the-art performances that have been achieved with these strategies and that have led to records of ∼20% efficiency in ∼200 nm absorbers. Finally, we identify persisting challenges and potential development avenues for attaining competitive performance with ever-thinner photovoltaic devices.
- 1 January 2024
- Published by AIP Publishing in APL Photonics
- Vol. 9 (1)
Open AccessLight management for ever-thinner photovoltaics: A tutorial review
Ultra-thin solar cells, an order of magnitude thinner than conventional technologies, are an emerging device concept that enables low-cost, flexible, lightweight, and defect-tolerant photovoltaics. However, the advent of ultra-thin technologies is hindered by the fundamental challenge of poor light harvesting in thinnest absorber layers, which entails prohibitive photocurrent and efficiency penalties. Here, from a tutorial perspective, we review different light-management platforms that can overcome this inherent limitation, namely, antireflection coatings, rear mirrors, and light-trapping textures. We then review the state-of-the-art performances that have been achieved with these strategies and that have led to records of ∼20% efficiency in ∼200 nm absorbers. Finally, we identify persisting challenges and potential development avenues for attaining competitive performance with ever-thinner photovoltaic devices.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Modal Analysis of GaAs Nanowire Solar Cells for Optimal Device Design
Nanowire solar cells have shown promise in next-generation applications, offering potential advantages in power-to-weight ratio, available form factors, cost and materials reduction, and radiation tolerance. However, nanowire solar cell performance remains limited by poor light absorption due to low dimensionality. Engineered light scattering through nanowire arrays could exploit the full phase-space, whereby scattered light, through constructive interference or coupling to waveguide modes, can result in stronger field localization within the active layer. To do so, the nanowire active layer demands optimization and careful design to fully take advantage of light-trapping in optical modes. This work presents potential trade-offs in device geometry guiding device design, particularly identifying fundamental modal structure for absorption enhancement through light management strategies. This work shows how nanowire parameters including nanowire diameter, array pitch, filling factor and substrate affect absorption in different spectral ranges due to changes in antireflection properties and escape cone losses. This analysis can further be applied to other III-V material systems and serve as a guide to more complex device fabrication in fully exploiting the available optical modes.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Modal Analysis of GaAs Nanowire Solar Cells for Optimal Device Design
Nanowire solar cells have shown promise in next-generation applications, offering potential advantages in power-to-weight ratio, available form factors, cost and materials reduction, and radiation tolerance. However, nanowire solar cell performance remains limited by poor light absorption due to low dimensionality. Engineered light scattering through nanowire arrays could exploit the full phase-space, whereby scattered light, through constructive interference or coupling to waveguide modes, can result in stronger field localization within the active layer. To do so, the nanowire active layer demands optimization and careful design to fully take advantage of light-trapping in optical modes. This work presents potential trade-offs in device geometry guiding device design, particularly identifying fundamental modal structure for absorption enhancement through light management strategies. This work shows how nanowire parameters including nanowire diameter, array pitch, filling factor and substrate affect absorption in different spectral ranges due to changes in antireflection properties and escape cone losses. This analysis can further be applied to other III-V material systems and serve as a guide to more complex device fabrication in fully exploiting the available optical modes.
- 10 March 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. PC12416, 19
Scattering surfaces for light management in ultra-thin photovoltaics (Conference Presentation)
Ultra-thin devices offer desirable properties including lightweight flexible form factors for system integration; reduced materials for lower cost sustainable production; and intrinsic tolerance to particle radiation, making them compelling candidates for space power applications. As thickness is reduced light absorption also reduces, necessitating the use of light management approaches, such as integrated rear surface planar reflectors, random or quasi-random scattering surfaces, and nanophotonic gratings. The relative merits of these approaches and different regimes in which they might be desirable are discussed along with correlative device and simulation results for their application to ultra-thin GaAs photovoltaics.
- 10 March 2023
- Published by SPIE-Intl Soc Optical Eng
- Vol. PC12416, 19
Scattering surfaces for light management in ultra-thin photovoltaics (Conference Presentation)
Ultra-thin devices offer desirable properties including lightweight flexible form factors for system integration; reduced materials for lower cost sustainable production; and intrinsic tolerance to particle radiation, making them compelling candidates for space power applications. As thickness is reduced light absorption also reduces, necessitating the use of light management approaches, such as integrated rear surface planar reflectors, random or quasi-random scattering surfaces, and nanophotonic gratings. The relative merits of these approaches and different regimes in which they might be desirable are discussed along with correlative device and simulation results for their application to ultra-thin GaAs photovoltaics.
- Open Access
- 23 June 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (8) , 2724-2735
Transparent Quasi-Random Structures for Multimodal Light Trapping in Ultrathin Solar Cells with Broad Engineering Tolerance
Waveguide modes are well-known to be a valuable light-trapping resource for absorption enhancement in solar cells. However, their scarcity in the thinnest device stacks compromises the multiresonant performance required to reach the highest efficiencies in ultrathin devices. We demonstrate that enriching the modal structure on such reduced length-scales is possible by integrating transparent semiconductor/dielectric scattering structures to the device architecture as opposed to more widely studied metallic textures. This phenomenon allows transparent quasi-random structures to emerge as strong light-trapping candidates for ultrathin solar cells, given that their broad scattering profiles are well-suited to exploit the increased number of waveguide modes for multiresonant absorption enhancement. A thorough study of the design space of quasi-random textures comprising more than 1500 designs confirms the superiority of transparent structures over a metallic embodiment, identifies broad and flexible design requirements to achieve optimal performances, and demonstrates photon harvesting capabilities leading to 20% efficiency with an 80 nm GaAs absorber. Our light-trapping strategy can be applied to a wide range of material systems and device architectures, is compatible with scalable low-cost fabrication techniques, and can assist current trends to reach the highest efficiencies in ever-thinner photovoltaics.
- 23 June 2022
- Published by American Chemical Society (ACS) in ACS Photonics
- Vol. 9 (8) , 2724-2735
Open AccessTransparent Quasi-Random Structures for Multimodal Light Trapping in Ultrathin Solar Cells with Broad Engineering Tolerance
Waveguide modes are well-known to be a valuable light-trapping resource for absorption enhancement in solar cells. However, their scarcity in the thinnest device stacks compromises the multiresonant performance required to reach the highest efficiencies in ultrathin devices. We demonstrate that enriching the modal structure on such reduced length-scales is possible by integrating transparent semiconductor/dielectric scattering structures to the device architecture as opposed to more widely studied metallic textures. This phenomenon allows transparent quasi-random structures to emerge as strong light-trapping candidates for ultrathin solar cells, given that their broad scattering profiles are well-suited to exploit the increased number of waveguide modes for multiresonant absorption enhancement. A thorough study of the design space of quasi-random textures comprising more than 1500 designs confirms the superiority of transparent structures over a metallic embodiment, identifies broad and flexible design requirements to achieve optimal performances, and demonstrates photon harvesting capabilities leading to 20% efficiency with an 80 nm GaAs absorber. Our light-trapping strategy can be applied to a wide range of material systems and device architectures, is compatible with scalable low-cost fabrication techniques, and can assist current trends to reach the highest efficiencies in ever-thinner photovoltaics.
- Open Access
- 28 January 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (3) , 4528-4542
Designing transparent nanophotonic gratings for ultra-thin solar cells
Integration of a rear surface nanophotonic grating can increase photocurrent in ultra-thin solar cells. Transparent gratings formed of dielectric materials and high bandgap semiconductors can offer efficient diffraction with lower parasitic absorption than more widely studied metal/dielectric equivalents. In these systems, the maximum photocurrent which can be obtained for a grating made of a given combination of materials is shown to follow a simple empirical model based on the optical constants of these materials and independent of grating dimensions. The grating dimensions still require optimization in order to maximize the photocurrent for a given active layer thickness by balancing the effects of diffraction outside the front surface escape cone and the tuning of waveguide modes in long wavelength regions which are poorly absorbed in an ultra-thin film. The optimal grating pitch is shown to be of particular relevance for both effects, changing nonmonotonically as the absorber gets thicker in order to track favourable waveguide mode resonances at wavelengths near the absorber bandgap. These trends together with the empirical model for material selection drastically reduce the design space for highly efficient light trapping with transparent gratings.
- 28 January 2022
- Published by Optica Publishing Group in Optics Express
- Vol. 30 (3) , 4528-4542
Open AccessDesigning transparent nanophotonic gratings for ultra-thin solar cells
Integration of a rear surface nanophotonic grating can increase photocurrent in ultra-thin solar cells. Transparent gratings formed of dielectric materials and high bandgap semiconductors can offer efficient diffraction with lower parasitic absorption than more widely studied metal/dielectric equivalents. In these systems, the maximum photocurrent which can be obtained for a grating made of a given combination of materials is shown to follow a simple empirical model based on the optical constants of these materials and independent of grating dimensions. The grating dimensions still require optimization in order to maximize the photocurrent for a given active layer thickness by balancing the effects of diffraction outside the front surface escape cone and the tuning of waveguide modes in long wavelength regions which are poorly absorbed in an ultra-thin film. The optimal grating pitch is shown to be of particular relevance for both effects, changing nonmonotonically as the absorber gets thicker in order to track favourable waveguide mode resonances at wavelengths near the absorber bandgap. These trends together with the empirical model for material selection drastically reduce the design space for highly efficient light trapping with transparent gratings.
- Open Access
- 23 September 2021
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (1) , 96-108
Ultra‐thin GaAs solar cells with nanophotonic metal‐dielectric diffraction gratings fabricated with displacement Talbot lithography
Ultra‐thin photovoltaics enable lightweight flexible form factors, suitable for emerging terrestrial applications such as electric vehicle integration. These devices also exhibit intrinsic radiation tolerance and increased specific power and so are uniquely enabling for space power applications, offering longer missions in hostile environments and reduced launch costs. In this work, a GaAs solar cell with an 80‐nm absorber is developed with short circuit current exceeding the single pass limit. Integrated light management is employed to compensate for increased photon transmission inherent to ultra‐thin absorbers, and efficiency enhancement of 68% over a planar on‐wafer equivalent is demonstrated. This is achieved using a wafer‐scale technique, displacement Talbot lithography, to fabricate a rear surface nanophotonic grating. Optical simulations definitively confirm Fabry‐Perot and waveguide mode contributions to the observed increase in absorption and also demonstrate a pathway to short circuit current of 26 mA/cm2, well in excess of the double pass limit.
- 23 September 2021
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 30 (1) , 96-108
Open AccessUltra‐thin GaAs solar cells with nanophotonic metal‐dielectric diffraction gratings fabricated with displacement Talbot lithography
Ultra‐thin photovoltaics enable lightweight flexible form factors, suitable for emerging terrestrial applications such as electric vehicle integration. These devices also exhibit intrinsic radiation tolerance and increased specific power and so are uniquely enabling for space power applications, offering longer missions in hostile environments and reduced launch costs. In this work, a GaAs solar cell with an 80‐nm absorber is developed with short circuit current exceeding the single pass limit. Integrated light management is employed to compensate for increased photon transmission inherent to ultra‐thin absorbers, and efficiency enhancement of 68% over a planar on‐wafer equivalent is demonstrated. This is achieved using a wafer‐scale technique, displacement Talbot lithography, to fabricate a rear surface nanophotonic grating. Optical simulations definitively confirm Fabry‐Perot and waveguide mode contributions to the observed increase in absorption and also demonstrate a pathway to short circuit current of 26 mA/cm2, well in excess of the double pass limit.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11681, 1168106
Ultra-thin photovoltaics for radiation-tolerant space power systems
Ultra-thin (less than 100 nm thick) photovoltaics are proposed as an enabling technology for space power applications due to their intrinsic radiation tolerance. Outside of the Earth's atmosphere, spacecraft are bombarded with energetic electrons and protons which can cause dislocations in the lattice structure of their solar cell materials thus limiting mission lifetimes. Certain orbits that could be advantageous for imaging, security and network coverage of the Earth are currently inaccessible due to high levels of radiation making them inhospitable to space craft. Ultra-thin cells have superior radiation tolerance but lower optical absorption which necessitates the integration of a nanophotonic light-trapping structure. The first iteration of ultra-thin 80 nm absorber layer devices patterned by Displacement Talbot Lithography has shown promising electrical and optical performance.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11681, 1168106
Ultra-thin photovoltaics for radiation-tolerant space power systems
Ultra-thin (less than 100 nm thick) photovoltaics are proposed as an enabling technology for space power applications due to their intrinsic radiation tolerance. Outside of the Earth's atmosphere, spacecraft are bombarded with energetic electrons and protons which can cause dislocations in the lattice structure of their solar cell materials thus limiting mission lifetimes. Certain orbits that could be advantageous for imaging, security and network coverage of the Earth are currently inaccessible due to high levels of radiation making them inhospitable to space craft. Ultra-thin cells have superior radiation tolerance but lower optical absorption which necessitates the integration of a nanophotonic light-trapping structure. The first iteration of ultra-thin 80 nm absorber layer devices patterned by Displacement Talbot Lithography has shown promising electrical and optical performance.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11681, 79-87
The optimal scattering structures for light-trapping in ultra-thin photovoltaic devices
The introduction of light scattering structures for efficient absorption of incident illumination is essential in ultra-thin solar cells given their reduced optical path length. The growing interest in these devices demands attaining high efficiencies through the identification of optimal designs to maximise the absorption of incident photons. A pathway towards such high efficiencies is the implementation of transparent scattering structures to minimise parasitic losses. We study the performance of these structures by focusing on dielectric/high-band-gap semiconductor scattering layers in an ultra-thin (80 nm) GaAs solar cell. Comparisons with absorptive scattering layers are enabled by presenting data for an equivalent device with metal/dielectric structures. Following a previously reported light management optimisation method which is guided by the dispersion of the avail- able waveguide modes, we find an improved performance for the transparent scattering layers. Our study also compares the light absorption enhancement offered by transparent photonic crystal diffractive arrays to that of transparent quasi-random geometries which target the diffracted power to the most favourable waveguide modes in the device. We find the former designs to have a superior performance in our device of interest, and the latter to suffer from greater reflection losses. Finally, our results also demonstrate the effectiveness of the optimisation method used and its applicability to multiple device architectures for the design of high-efficiency photovoltaics.
- 5 March 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11681, 79-87
The optimal scattering structures for light-trapping in ultra-thin photovoltaic devices
The introduction of light scattering structures for efficient absorption of incident illumination is essential in ultra-thin solar cells given their reduced optical path length. The growing interest in these devices demands attaining high efficiencies through the identification of optimal designs to maximise the absorption of incident photons. A pathway towards such high efficiencies is the implementation of transparent scattering structures to minimise parasitic losses. We study the performance of these structures by focusing on dielectric/high-band-gap semiconductor scattering layers in an ultra-thin (80 nm) GaAs solar cell. Comparisons with absorptive scattering layers are enabled by presenting data for an equivalent device with metal/dielectric structures. Following a previously reported light management optimisation method which is guided by the dispersion of the avail- able waveguide modes, we find an improved performance for the transparent scattering layers. Our study also compares the light absorption enhancement offered by transparent photonic crystal diffractive arrays to that of transparent quasi-random geometries which target the diffracted power to the most favourable waveguide modes in the device. We find the former designs to have a superior performance in our device of interest, and the latter to suffer from greater reflection losses. Finally, our results also demonstrate the effectiveness of the optimisation method used and its applicability to multiple device architectures for the design of high-efficiency photovoltaics.
- Open Access
- 11 December 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (26) , 39093-39111
Light management in ultra-thin solar cells: a guided optimisation approach
The success of ever-thinner photovoltaics relies on the introduction of light management strategies to enhance the absorption of incident illumination. Tailoring these strategies to maximise the absorption of light requires optimising the complex interplay between multiple design parameters. We study this interplay with a transfer matrix method and rigorous coupled-wave analysis, within the context of waveguide modes in an ultra-thin (80 nm) GaAs solar cell. Based on this study, we develop a framework for light management optimisation which is guided by the underlying optical phenomena that determine the most favourable design parameters. In contrast to other optimisation approaches which exhaustively simulate multiple parameter combinations looking for the highest integrated absorption, our framework reduces the parameter space for optimisation, furthers our fundamental understanding of light management and is applicable to multiple length-scales and device architectures. We demonstrate the power of our framework by using it to compare the light trapping performance of photonic crystal gratings to that of engineered quasi-random structures, finding that photonic crystal gratings offer a superior performance in our device of interest.
- 11 December 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (26) , 39093-39111
Open AccessLight management in ultra-thin solar cells: a guided optimisation approach
The success of ever-thinner photovoltaics relies on the introduction of light management strategies to enhance the absorption of incident illumination. Tailoring these strategies to maximise the absorption of light requires optimising the complex interplay between multiple design parameters. We study this interplay with a transfer matrix method and rigorous coupled-wave analysis, within the context of waveguide modes in an ultra-thin (80 nm) GaAs solar cell. Based on this study, we develop a framework for light management optimisation which is guided by the underlying optical phenomena that determine the most favourable design parameters. In contrast to other optimisation approaches which exhaustively simulate multiple parameter combinations looking for the highest integrated absorption, our framework reduces the parameter space for optimisation, furthers our fundamental understanding of light management and is applicable to multiple length-scales and device architectures. We demonstrate the power of our framework by using it to compare the light trapping performance of photonic crystal gratings to that of engineered quasi-random structures, finding that photonic crystal gratings offer a superior performance in our device of interest.