Uday Narayan Maiti
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Uday Narayan Maiti has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
Sujit Kumar Deb
8 shared publicationsAbhisek Majumdar
7 shared publicationsAmalika Patra
7 shared publicationsGolam Masud Karim
7 shared publicationsPronoy Dutta
7 shared publicationsAnirban Sikdar
Department of Physics Indian Institute of Technology Guwahati Guwahati Assam 781039 India
5 shared publications
Latest Publications
- 12 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (8) , 3206-3218
Spatially confined surface-terminated MXene nanosheets as a multifunctional platform for triboelectric sensing and logic gates
A spatially confined polar-group-terminated MXene nanosheet/PDMS and EC nanofiber-based vertical TENG, with charge transfer validated by DFT calculations and experiments, enables multifaceted energy harvesting and self-powered sensing applications.
- 12 December 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 14 (8) , 3206-3218
Spatially confined surface-terminated MXene nanosheets as a multifunctional platform for triboelectric sensing and logic gates
A spatially confined polar-group-terminated MXene nanosheet/PDMS and EC nanofiber-based vertical TENG, with charge transfer validated by DFT calculations and experiments, enables multifaceted energy harvesting and self-powered sensing applications.
- 2 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (7) , 4711-4721
Exploring High-Entropy Molybdate as a Highly Stable Anode for Li-Ion Batteries
- 2 April 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (7) , 4711-4721
Exploring High-Entropy Molybdate as a Highly Stable Anode for Li-Ion Batteries
- 10 October 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (2) , e202400970
Optimizing Hard Carbon Anodes from Agricultural Biomass for Superior Lithium and Sodium Ion Battery Performance
Biomass‐derived carbon materials are gaining attention for their environmental and economic advantages in waste resource recovery, particularly for their potential as high‐energy materials for alkali metal ion storage. However, ensuring the reliability of secondary battery anodes remains a significant hurdle. Here, we report Areca Catechu sheath‐inner part derived carbon (referred to as ASIC) as a high‐performance anode for both rechargeable Li‐ion (LIBs) and Na‐ion batteries (SIBs). We explore the microstructure and electrochemical performance of ASIC materials synthesized at various pyrolysis temperatures ranging from 700 to 1400 °C. ASIC‐9, pyrolyzed at 900 °C, exhibits multilayer stacked sheets with the highest specific surface area, and the least lateral size and stacking height. ASIC‐14, pyrolyzed at 1400 °C, demonstrates the most ordered carbon structure with the least defect concentration and the highest stacking height and an increased lateral size. ASIC‐9 achieves the highest capacities (676 mAh/g at 0.134 C) and rate performance (94 mAh/g at 13.4 C) for hosting Li+ ions, while ASIC‐14 exhibits superior electrochemical performance for hosting Na+ ions, maintaining a high specific capacity after 300 cycles with over 99.5 % Coulombic efficiency. This comprehensive understanding of structure‐property relationships paves the way for the practical utilization of biomass‐derived carbon in various battery applications.
- 10 October 2024
- Published by Wiley in ChemSusChem
- Vol. 18 (2) , e202400970
Optimizing Hard Carbon Anodes from Agricultural Biomass for Superior Lithium and Sodium Ion Battery Performance
Biomass‐derived carbon materials are gaining attention for their environmental and economic advantages in waste resource recovery, particularly for their potential as high‐energy materials for alkali metal ion storage. However, ensuring the reliability of secondary battery anodes remains a significant hurdle. Here, we report Areca Catechu sheath‐inner part derived carbon (referred to as ASIC) as a high‐performance anode for both rechargeable Li‐ion (LIBs) and Na‐ion batteries (SIBs). We explore the microstructure and electrochemical performance of ASIC materials synthesized at various pyrolysis temperatures ranging from 700 to 1400 °C. ASIC‐9, pyrolyzed at 900 °C, exhibits multilayer stacked sheets with the highest specific surface area, and the least lateral size and stacking height. ASIC‐14, pyrolyzed at 1400 °C, demonstrates the most ordered carbon structure with the least defect concentration and the highest stacking height and an increased lateral size. ASIC‐9 achieves the highest capacities (676 mAh/g at 0.134 C) and rate performance (94 mAh/g at 13.4 C) for hosting Li+ ions, while ASIC‐14 exhibits superior electrochemical performance for hosting Na+ ions, maintaining a high specific capacity after 300 cycles with over 99.5 % Coulombic efficiency. This comprehensive understanding of structure‐property relationships paves the way for the practical utilization of biomass‐derived carbon in various battery applications.
- 25 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (32)
Transient Electro‐Graphitization of MOFs Affecting the Crystallization of Ruthenium Nanoclusters for Highly Efficient Hydrogen Evolution
Fine control over the graphitization level of carbonized nanostructures can play a strategic role in tuning the crystallization of supported nanocatalysts, thereby modulating the kinetics of catalysis. However, realizing the synergistic interplay of graphitization‐tunable support and supported catalysts poses a significant challenge. This study proposes a current pulse‐induced ultrafast strategy for developing MOF‐derived graphitic nano‐leaves (GNL) and supported ultrafine ruthenium nanoclusters exhibiting selective crystallization states depending on the tunable graphitization level of GNL. The resulting ultrafine (≈0.7 nm) amorphous‐ruthenium nanoclusters linked with GNL (a‐Ru@GNL500) exhibit state‐of‐the‐art performance in the hydrogen evolution reaction (HER), requiring very low overpotentials of only 23.0 and 285.0 mV to achieve current densities of 10 and 500 mA cm−2, respectively. Furthermore, a‐Ru@GNL500 demonstrates exceptional operational stability for 100 h under high HER currents of 200 and 400 mA cm−2. Density functional theory reveals that the unique electronic structure of a‐Ru and the cooperative effect of cobalt embedded in the graphitic layer lower the occupancy of the antibonding orbital, resulting in an accelerated HER process. Additionally, the unique electronic structure, highly conducting GNL, and efficient bubble release dynamics of super‐aerophobic a‐Ru@GNL500 contribute to reduced overpotentials, particularly at high HER current densities.
- 25 May 2024
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (32)
Transient Electro‐Graphitization of MOFs Affecting the Crystallization of Ruthenium Nanoclusters for Highly Efficient Hydrogen Evolution
Fine control over the graphitization level of carbonized nanostructures can play a strategic role in tuning the crystallization of supported nanocatalysts, thereby modulating the kinetics of catalysis. However, realizing the synergistic interplay of graphitization‐tunable support and supported catalysts poses a significant challenge. This study proposes a current pulse‐induced ultrafast strategy for developing MOF‐derived graphitic nano‐leaves (GNL) and supported ultrafine ruthenium nanoclusters exhibiting selective crystallization states depending on the tunable graphitization level of GNL. The resulting ultrafine (≈0.7 nm) amorphous‐ruthenium nanoclusters linked with GNL (a‐Ru@GNL500) exhibit state‐of‐the‐art performance in the hydrogen evolution reaction (HER), requiring very low overpotentials of only 23.0 and 285.0 mV to achieve current densities of 10 and 500 mA cm−2, respectively. Furthermore, a‐Ru@GNL500 demonstrates exceptional operational stability for 100 h under high HER currents of 200 and 400 mA cm−2. Density functional theory reveals that the unique electronic structure of a‐Ru and the cooperative effect of cobalt embedded in the graphitic layer lower the occupancy of the antibonding orbital, resulting in an accelerated HER process. Additionally, the unique electronic structure, highly conducting GNL, and efficient bubble release dynamics of super‐aerophobic a‐Ru@GNL500 contribute to reduced overpotentials, particularly at high HER current densities.
Activating Ion Channels in Collapsed Hydrogel Derived Densified MXene Films with Cellulose Nanofibers to Overcome the Areal Versus Volumetric Capacitance Trade‐Off
Concomitant achievement of all three performance pillars of a supercapacitor device, namely gravimetric, areal, and volumetric capacitance is a grand challenge. Nevertheless, its fulfilment is indispensable for commercial usage. Although, high compactness is the fundamental requirement to achieve high volumetric performance, it severely affects ion transportation in thick electrodes. Such trade‐off makes it extremely challenging to realize very high areal and volumetric performance simultaneously. Here, a collapsed hydrogel strategy is introduced to develop MXene/cellulose nanofiber (CNF) based densified electrodes that offer excellent ion transportation despite a massive increase in areal mass loading (>70 mg cm−2). Quasi‐oriented MXene/CNF (MXCF) hydrogels are produced through an electric field‐guided co‐assembly technique. Ambient dehydration of these hydrogels incorporates numerous pores in the resultant compact electrodes due to crumpling of the MXene sheets, while CNF ensures connectivity among the locally blocked pores in different length scales. The resultant collapsed MXCF densified electrode shows a remarkably high areal capacitance of 16 F cm−2 while simultaneously displaying a high volumetric capacitance of 849.8 F cm−3 at an ultrahigh mass loading of up to 73.4 mg cm−2. The universality of strategy, including the co‐assembly of hydrogel and its collapse, is further demonstrated to develop high‐performance asymmetric and wearable devices.
Activating Ion Channels in Collapsed Hydrogel Derived Densified MXene Films with Cellulose Nanofibers to Overcome the Areal Versus Volumetric Capacitance Trade‐Off
Concomitant achievement of all three performance pillars of a supercapacitor device, namely gravimetric, areal, and volumetric capacitance is a grand challenge. Nevertheless, its fulfilment is indispensable for commercial usage. Although, high compactness is the fundamental requirement to achieve high volumetric performance, it severely affects ion transportation in thick electrodes. Such trade‐off makes it extremely challenging to realize very high areal and volumetric performance simultaneously. Here, a collapsed hydrogel strategy is introduced to develop MXene/cellulose nanofiber (CNF) based densified electrodes that offer excellent ion transportation despite a massive increase in areal mass loading (>70 mg cm−2). Quasi‐oriented MXene/CNF (MXCF) hydrogels are produced through an electric field‐guided co‐assembly technique. Ambient dehydration of these hydrogels incorporates numerous pores in the resultant compact electrodes due to crumpling of the MXene sheets, while CNF ensures connectivity among the locally blocked pores in different length scales. The resultant collapsed MXCF densified electrode shows a remarkably high areal capacitance of 16 F cm−2 while simultaneously displaying a high volumetric capacitance of 849.8 F cm−3 at an ultrahigh mass loading of up to 73.4 mg cm−2. The universality of strategy, including the co‐assembly of hydrogel and its collapse, is further demonstrated to develop high‐performance asymmetric and wearable devices.
- 24 July 2023
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 7 (17) , 4303-4316
Achieving favourable oxygen electrocatalytic activity with compositionally complex metal molybdates
Tuning the surface binding of the active species or intermediates with the catalyst is an important consideration when designing high-performance electrocatalysts. In this respect, high entropy materials have aroused significant research interest owing to the high entropy-driven enhanced electrochemically active surface, modified electronic configuration and the cocktail effect in the compositionally complex material, which could facilitate the mass transport and charge transfer at the solid–liquid–gas interface. However, research on high entropy materials is only in its infancy. Herein, we demonstrate a simple and scalable approach for designing first-row transition metal based on a new high entropy molybdate as a high-performance bifunctional electrocatalyst for both oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The high entropy molybdate (HEMo; (MnNiCuCoZn)MoO4) was synthesized by applying an oxalate-based coprecipitation approach, followed by calcinating at different temperatures ranging from 800 to 1000 °C. With MnMoO4 as the starting molybdate, the successive addition of Ni, Cu, Co, and Zn produced different binary, ternary, quaternary and high entropy molybdates, which showed gradually improved OER electrocatalytic activity with an increasing number of shared metal centres in the molybdate framework. Among the different molybdates, HEMo calcined at 900 °C (HEMo@900) showed the best OER electrocatalytic activity with a very low overpotential of 318 mV at 10 mA cm−2 with a Tafel slope value of only 49.45 mV dec−1 and long-term stability of >100 h in 1 M KOH electrolyte. The HEMo@900 also exhibited excellent ORR electrocatalytic activity with a high onset potential of ∼0.88 V (vs. RHE), half wave potential of 0.74 V (vs. RHE) and an average electron transfer number (n) of ∼3.4, indicating a favourable four-electron transfer process. The OER/ORR bifunctional electrocatalytic activity was comparable to that of the benchmark OER (RuO2) and ORR (Pt/C) electrocatalysts tested under similar conditions. To the best of our knowledge, this is the first report on exploring the high entropy molybdates towards oxygen electrocatalytic reactions.
- 24 July 2023
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 7 (17) , 4303-4316
Achieving favourable oxygen electrocatalytic activity with compositionally complex metal molybdates
Tuning the surface binding of the active species or intermediates with the catalyst is an important consideration when designing high-performance electrocatalysts. In this respect, high entropy materials have aroused significant research interest owing to the high entropy-driven enhanced electrochemically active surface, modified electronic configuration and the cocktail effect in the compositionally complex material, which could facilitate the mass transport and charge transfer at the solid–liquid–gas interface. However, research on high entropy materials is only in its infancy. Herein, we demonstrate a simple and scalable approach for designing first-row transition metal based on a new high entropy molybdate as a high-performance bifunctional electrocatalyst for both oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). The high entropy molybdate (HEMo; (MnNiCuCoZn)MoO4) was synthesized by applying an oxalate-based coprecipitation approach, followed by calcinating at different temperatures ranging from 800 to 1000 °C. With MnMoO4 as the starting molybdate, the successive addition of Ni, Cu, Co, and Zn produced different binary, ternary, quaternary and high entropy molybdates, which showed gradually improved OER electrocatalytic activity with an increasing number of shared metal centres in the molybdate framework. Among the different molybdates, HEMo calcined at 900 °C (HEMo@900) showed the best OER electrocatalytic activity with a very low overpotential of 318 mV at 10 mA cm−2 with a Tafel slope value of only 49.45 mV dec−1 and long-term stability of >100 h in 1 M KOH electrolyte. The HEMo@900 also exhibited excellent ORR electrocatalytic activity with a high onset potential of ∼0.88 V (vs. RHE), half wave potential of 0.74 V (vs. RHE) and an average electron transfer number (n) of ∼3.4, indicating a favourable four-electron transfer process. The OER/ORR bifunctional electrocatalytic activity was comparable to that of the benchmark OER (RuO2) and ORR (Pt/C) electrocatalysts tested under similar conditions. To the best of our knowledge, this is the first report on exploring the high entropy molybdates towards oxygen electrocatalytic reactions.
- 21 February 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (5) , 3254-3267
Computational and Experimental Design of the Octahedral PdFe Alloy Nanocatalyst for Hiyama Cross-Coupling and Environmental Pollutant Degradation
- 21 February 2023
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 6 (5) , 3254-3267
Computational and Experimental Design of the Octahedral PdFe Alloy Nanocatalyst for Hiyama Cross-Coupling and Environmental Pollutant Degradation