Zhao Yan-Ying
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Zhao Yan-Ying has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
Geng Yi-Xing
2 shared publications- Haiyang Lu
Shenzhen Key Laboratory of Ultraintense Laser and Advanced Material Technology, Center for Intense Laser Application Technology, and College of Engineering Physics, Shenzhen Technology University 3 , Shenzhen 518118
2 shared publications Li Rong-Feng
2 shared publications- M. J. Wu
State Key Laboratory of Nuclear Physics and Technology, and Key Laboratory of HEDP of the Ministry of Education, CAPT, Peking University, Beijing 100871, China
2 shared publications Yan Xue-Qing
2 shared publicationsChen Jia-Er
1 shared publication
Latest Publications
- Open Access
A Sub-Picosecond Laser System Based on High-Energy Yb:YAG Chirped-Pulse Regenerative Amplification
In this study, we have successfully demonstrated a high-energy subpicosecond Yb:YAG laser system based on chirped-pulse regenerative amplification. Our experimental results demonstrate a pulse energy of 3 mJ with a pulse duration of 829.8 fs and a repetition rate of 1 kHz. Additionally, we conducted an extensive investigation into the system’s recompression capability under various modulation and seeding conditions. Our findings suggest that the system can achieve effective recompression over a broad range of parameters, with the ability to compensate for a considerable degree of chirp. Our study provides valuable insights into the fundamental physic of high-energy laser systems and the performance characteristics of chirped-pulse regenerative amplification.
Open AccessA Sub-Picosecond Laser System Based on High-Energy Yb:YAG Chirped-Pulse Regenerative Amplification
In this study, we have successfully demonstrated a high-energy subpicosecond Yb:YAG laser system based on chirped-pulse regenerative amplification. Our experimental results demonstrate a pulse energy of 3 mJ with a pulse duration of 829.8 fs and a repetition rate of 1 kHz. Additionally, we conducted an extensive investigation into the system’s recompression capability under various modulation and seeding conditions. Our findings suggest that the system can achieve effective recompression over a broad range of parameters, with the ability to compensate for a considerable degree of chirp. Our study provides valuable insights into the fundamental physic of high-energy laser systems and the performance characteristics of chirped-pulse regenerative amplification.
- Open Access
Introduction of Research Work on Laser Proton Acceleration and Its Application Carried out on Compact Laser–Plasma Accelerator at Peking University
Laser plasma acceleration has made remarkable progress in the last few decades, but it also faces many challenges. Although the high gradient is a great potential advantage, the beam quality of the laser accelerator has a certain gap, or it is different from that of traditional accelerators. Therefore, it is important to explore and utilize its own features. In this article, some recent research progress on laser proton acceleration and its irradiation application, which was carried out on the compact laser plasma accelerator (CLAPA) platform at Peking University, have been introduced. By combining a TW laser accelerator and a monoenergetic beamline, proton beams with energies of less than 10 MeV, an energy spread of less than 1%, and with several to tens of pC charge, have been stably produced and transported in CLAPA. The beamline is an object–image point analyzing system, which ensures the transmission efficiency and the energy selection accuracy for proton beams with large initial divergence angle and energy spread. A spread-out Bragg peak (SOBP) is produced with high precision beam control, which preliminarily proved the feasibility of the laser accelerator for radiotherapy. Some application experiments based on laser-accelerated proton beams have also been carried out, such as proton radiograph, preparation of graphene on SiC, ultra-high dose FLASH radiation of cancer cells, and ion-beam trace probes for plasma diagnosis. The above applications take advantage of the unique characteristics of laser-driven protons, such as a micron scale point source, an ultra-short pulse duration, a wide energy spectrum, etc. A new laser-driven proton therapy facility (CLAPA II) is being designed and is under construction at Peking University. The 100 MeV proton beams will be produced via laser–plasma interaction by using a 2-PW laser, which may promote the real-world applications of laser accelerators in malignant tumor treatment soon.
Open AccessIntroduction of Research Work on Laser Proton Acceleration and Its Application Carried out on Compact Laser–Plasma Accelerator at Peking University
Laser plasma acceleration has made remarkable progress in the last few decades, but it also faces many challenges. Although the high gradient is a great potential advantage, the beam quality of the laser accelerator has a certain gap, or it is different from that of traditional accelerators. Therefore, it is important to explore and utilize its own features. In this article, some recent research progress on laser proton acceleration and its irradiation application, which was carried out on the compact laser plasma accelerator (CLAPA) platform at Peking University, have been introduced. By combining a TW laser accelerator and a monoenergetic beamline, proton beams with energies of less than 10 MeV, an energy spread of less than 1%, and with several to tens of pC charge, have been stably produced and transported in CLAPA. The beamline is an object–image point analyzing system, which ensures the transmission efficiency and the energy selection accuracy for proton beams with large initial divergence angle and energy spread. A spread-out Bragg peak (SOBP) is produced with high precision beam control, which preliminarily proved the feasibility of the laser accelerator for radiotherapy. Some application experiments based on laser-accelerated proton beams have also been carried out, such as proton radiograph, preparation of graphene on SiC, ultra-high dose FLASH radiation of cancer cells, and ion-beam trace probes for plasma diagnosis. The above applications take advantage of the unique characteristics of laser-driven protons, such as a micron scale point source, an ultra-short pulse duration, a wide energy spectrum, etc. A new laser-driven proton therapy facility (CLAPA II) is being designed and is under construction at Peking University. The 100 MeV proton beams will be produced via laser–plasma interaction by using a 2-PW laser, which may promote the real-world applications of laser accelerators in malignant tumor treatment soon.
- 1 January 2017
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 66 (15) , 150601
High efficiency cross-polarized wave filter for non-vacuum transmission
Development of high-peak power laser system encounters difficulties in producing the pulses with high temporal contrast. To increase the pulse temporal contrast ratio, a nonlinear filter based on crossed-polarized wave (XPW) generation is proposed. The XPW generation relies on a third-order nonlinear process occurring in a nonlinear medium, such as barium fluorite (BaF2) crystal. The XPW process is quite straightforward:a linearly polarized laser pulse is focused on BaF2 crystal positioned between two orthogonally polarizers, high power main pulses due to nonlinear polarization rotation can pass through the second polarizer, while low power unconverted pre-and post-pulses are filtered by the second polarizer. With the XPW technique, pulse contrast can be enhanced by several orders of magnitude. Furthermore, XPW spectrum can be broaden by a factor with respect to the initial spectrum. This efficient pulse cleaner presents many advantages and has proved to be a simple and reliable pulse filter operating in a double chirped pulse amplification system. Most of previous XPW experiments utilize short focal systems or work off focus due to an intensity limit in the crystal (BaF2). These drawbacks result in a lower conversion efficiency (lower than 10%) when using a single crystal. Dual crystal setup is capable of achieving efficiency more than 20%, yet the configuration restricts the crystal separation to a millimeter level. The use of long focus lens in the XPW device is capable of reaching higher efficiency, with BaF2 crystal positioned in the focal plane. Hence for milljoule pulses, the setup distance increases to tens of meters, resulting in a complicated system and cumbersome configuration. Considering these limitations, a compact, highly efficient and stable XPW generation using dual-lens system suitable for non-vacuum transmission is presented. The measured nonlinear accumulated phase shows little deterioration of pulse quality. With a compact dual lens system, we realize an excellent XPW conversion of above 22% (internal efficiency of 30%) with using double BaF2 crystals, while a femtosecond laser pulse can experience a spectrum broadening up to a factor of 1.78. The dual-lens configuration overcomes the crystal separation limit, and conversion efficiency exceeds 20% for a crystal separation from 13 cm to 22 cm, which is conducible to flexibility and robustness. The stability for the setup to generate shorter pulses with very high contrast or compensate for spectral gain narrowing in the preamplifier is ensured due to the dual-lens focusing system.
- 1 January 2017
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 66 (15) , 150601
High efficiency cross-polarized wave filter for non-vacuum transmission
Development of high-peak power laser system encounters difficulties in producing the pulses with high temporal contrast. To increase the pulse temporal contrast ratio, a nonlinear filter based on crossed-polarized wave (XPW) generation is proposed. The XPW generation relies on a third-order nonlinear process occurring in a nonlinear medium, such as barium fluorite (BaF2) crystal. The XPW process is quite straightforward:a linearly polarized laser pulse is focused on BaF2 crystal positioned between two orthogonally polarizers, high power main pulses due to nonlinear polarization rotation can pass through the second polarizer, while low power unconverted pre-and post-pulses are filtered by the second polarizer. With the XPW technique, pulse contrast can be enhanced by several orders of magnitude. Furthermore, XPW spectrum can be broaden by a factor with respect to the initial spectrum. This efficient pulse cleaner presents many advantages and has proved to be a simple and reliable pulse filter operating in a double chirped pulse amplification system. Most of previous XPW experiments utilize short focal systems or work off focus due to an intensity limit in the crystal (BaF2). These drawbacks result in a lower conversion efficiency (lower than 10%) when using a single crystal. Dual crystal setup is capable of achieving efficiency more than 20%, yet the configuration restricts the crystal separation to a millimeter level. The use of long focus lens in the XPW device is capable of reaching higher efficiency, with BaF2 crystal positioned in the focal plane. Hence for milljoule pulses, the setup distance increases to tens of meters, resulting in a complicated system and cumbersome configuration. Considering these limitations, a compact, highly efficient and stable XPW generation using dual-lens system suitable for non-vacuum transmission is presented. The measured nonlinear accumulated phase shows little deterioration of pulse quality. With a compact dual lens system, we realize an excellent XPW conversion of above 22% (internal efficiency of 30%) with using double BaF2 crystals, while a femtosecond laser pulse can experience a spectrum broadening up to a factor of 1.78. The dual-lens configuration overcomes the crystal separation limit, and conversion efficiency exceeds 20% for a crystal separation from 13 cm to 22 cm, which is conducible to flexibility and robustness. The stability for the setup to generate shorter pulses with very high contrast or compensate for spectral gain narrowing in the preamplifier is ensured due to the dual-lens focusing system.
- 1 January 2017
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 66 (4) , 040601
Influences of quadratic spectral phase on characteristics of two crystal cross-polarized generation with femtosecond pulses
The rapid developments of ultra-intense and ultra-short laser offer the possibility to study laser driven ion acceleration with using solid density target. However, the prepulse and amplified spontaneous emission generated in the amplification can create preplasma at the target front by heating, melting and evaporating a portion of a solid density. The main pulse then interacts with the preplasma, which would be harmful to laser ion acceleration. Therefore, many methods have been developed to enhance the temporal contrast of high power laser system, such as saturable absorber, cross polarized wave generation (XPW) and plasma mirror. With many advantages, such as high conversion efficiency, introducing neither spatial nor spectral distortions, and easy setup compared with other mechanisms, XPW has been used to clean the femtosecond laser system. Besides that, the spectrum of the XPW pulse could be broadened by 3 times under the best condition compared with the initial spectrum. It can solve the spectrum narrowing problem during the laser amplification to obtain ultra-short femtosecond laser pulse. Here, we experimentally investigate the output power, spectrum bandwidth and center wavelength shift of the generated cross-polarized wave according to the input pulse quadratic spectral phase. The femtosecond laser pulse in compact laser plasma accelerator system at Peking University is used to investigate the role of quadratic spectral phase in characterizing the two crystal cross-polarized generation. The Ti:Sapphire-based laser system has a central wavelength of 798 nm and bandwidth of 35.5 nm which allows the pulse to be compressed down to 40 fs duration (FWHM). Typical the input pulse energy of XPW is 150 upJ and the laser system operates well at 1 kHz repetition rate. The quadratic spectral phase can be increased by changing the position of compressor grating. The conversion efficiency, spectrum bandwidth and the central wavelength shift by changing the quadratic spectral phase are measured. The conversion efficiency is 17% when quadratic spectral phase 2=0, and decreases as quadratic spectral phase increases. The rapid decrease is caused by negative quadratic spectral phase. The spectrum bandwidth is 62 nm under the optimum condition, and the broadening effect exists when quadratic spectral phase is in a range of -280 fs2 2 1400 fs2. It is slowly blue-shifted when 20 and stays at 772 nm when 21000 fs2. It starts to be red-shifted when 20 and stays at 806 nm finally. In conclusion, with the increase of quadratic spectral phase, we observe the effects of conversion efficiency and spectrum bandwidth and the shift of central wavelength. Moreover, the influences of positive and negative quadratic spectral phase on characteristics of XPW are different. Our result shows that the negative quadratic spectral phaseis more effective at reducing the conversion efficiency and spectrum bandwidth than the positive one.
- 1 January 2017
- Published by Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences in Acta Physica Sinica
- Vol. 66 (4) , 040601
Influences of quadratic spectral phase on characteristics of two crystal cross-polarized generation with femtosecond pulses
The rapid developments of ultra-intense and ultra-short laser offer the possibility to study laser driven ion acceleration with using solid density target. However, the prepulse and amplified spontaneous emission generated in the amplification can create preplasma at the target front by heating, melting and evaporating a portion of a solid density. The main pulse then interacts with the preplasma, which would be harmful to laser ion acceleration. Therefore, many methods have been developed to enhance the temporal contrast of high power laser system, such as saturable absorber, cross polarized wave generation (XPW) and plasma mirror. With many advantages, such as high conversion efficiency, introducing neither spatial nor spectral distortions, and easy setup compared with other mechanisms, XPW has been used to clean the femtosecond laser system. Besides that, the spectrum of the XPW pulse could be broadened by 3 times under the best condition compared with the initial spectrum. It can solve the spectrum narrowing problem during the laser amplification to obtain ultra-short femtosecond laser pulse. Here, we experimentally investigate the output power, spectrum bandwidth and center wavelength shift of the generated cross-polarized wave according to the input pulse quadratic spectral phase. The femtosecond laser pulse in compact laser plasma accelerator system at Peking University is used to investigate the role of quadratic spectral phase in characterizing the two crystal cross-polarized generation. The Ti:Sapphire-based laser system has a central wavelength of 798 nm and bandwidth of 35.5 nm which allows the pulse to be compressed down to 40 fs duration (FWHM). Typical the input pulse energy of XPW is 150 upJ and the laser system operates well at 1 kHz repetition rate. The quadratic spectral phase can be increased by changing the position of compressor grating. The conversion efficiency, spectrum bandwidth and the central wavelength shift by changing the quadratic spectral phase are measured. The conversion efficiency is 17% when quadratic spectral phase 2=0, and decreases as quadratic spectral phase increases. The rapid decrease is caused by negative quadratic spectral phase. The spectrum bandwidth is 62 nm under the optimum condition, and the broadening effect exists when quadratic spectral phase is in a range of -280 fs2 2 1400 fs2. It is slowly blue-shifted when 20 and stays at 772 nm when 21000 fs2. It starts to be red-shifted when 20 and stays at 806 nm finally. In conclusion, with the increase of quadratic spectral phase, we observe the effects of conversion efficiency and spectrum bandwidth and the shift of central wavelength. Moreover, the influences of positive and negative quadratic spectral phase on characteristics of XPW are different. Our result shows that the negative quadratic spectral phaseis more effective at reducing the conversion efficiency and spectrum bandwidth than the positive one.