Takashi Lawson
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Takashi Lawson has a total of 113 co-authors. Here are the top co-authors by number of shared publications:
- Tijmen G. Euser
University of Cambridge
7 shared publications - Erwin Reisner
University of Cambridge
6 shared publications - Alexander S. Gentleman
University of Cambridge
5 shared publications Ava Lage
Yusuf Hamied Department of Chemistry, University of Cambridge, Cambridge CB2 1EW, U.K.
4 shared publications- Rachel C. Evans
University of Cambridge
4 shared publications - Helen Tunstall García
University of Cambridge
3 shared publications
Latest Publications
- 2 April 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (4) , 698
Property-driven analysis of glasses for data storage via femtosecond laser writing
The growing demand for high-density, long-term data storage has intensified interest in three-dimensional optical storage based on laser-written structures in glass. We evaluate a diverse set of commercial glasses to determine how intrinsic material properties influence the formation of multibit phase voxels. By analyzing voxel quality and write efficiency, we develop a materials-screening framework that links storage performance to measurable glass properties. Thermal diffusivity emerges as the property most strongly correlated with quality ( r =0.78 ). The resulting performance landscape identifies a Pareto front in which Schott K10 exhibits the highest write efficiency ( 0.115bitnJ −1 voxel −1 ), while Borofloat 33 provides the highest quality ( 1.76bitvoxel −1 ). Overall, this work demonstrates a generalizable methodology for selecting glasses for advanced laser-processing applications, highlighting thermal diffusivity as a key factor for achieving precise photonic structuring.
- 2 April 2026
- Published by Optica Publishing Group in Optica
- Vol. 13 (4) , 698
Property-driven analysis of glasses for data storage via femtosecond laser writing
The growing demand for high-density, long-term data storage has intensified interest in three-dimensional optical storage based on laser-written structures in glass. We evaluate a diverse set of commercial glasses to determine how intrinsic material properties influence the formation of multibit phase voxels. By analyzing voxel quality and write efficiency, we develop a materials-screening framework that links storage performance to measurable glass properties. Thermal diffusivity emerges as the property most strongly correlated with quality ( r =0.78 ). The resulting performance landscape identifies a Pareto front in which Schott K10 exhibits the highest write efficiency ( 0.115bitnJ −1 voxel −1 ), while Borofloat 33 provides the highest quality ( 1.76bitvoxel −1 ). Overall, this work demonstrates a generalizable methodology for selecting glasses for advanced laser-processing applications, highlighting thermal diffusivity as a key factor for achieving precise photonic structuring.
- Top Cited PapersOpen Access
- 18 February 2026
- Published by Springer Nature in Nature
- Vol. 650 (8102) , 606-612
Laser writing in glass for dense, fast and efficient archival data storage
Long-term preservation of digital information is vital for safeguarding the knowledge of humanity for future generations. Existing archival storage solutions, such as magnetic tapes and hard disk drives, suffer from limited media lifespans that render them unsuitable for long-term data retention1,2,3. Optical storage approaches, particularly laser writing in robust media such as glass, have emerged as promising alternatives with the potential for increased longevity. Previous work4,5,6,7,8,9,10,11,12,13,14,15,16 has predominantly optimized individual aspects such as data density but has not demonstrated an end-to-end system, including writing, storing and retrieving information. Here we report an optical archival storage technology based on femtosecond laser direct writing in glass that addresses the practical demands of archival storage, which we call Silica. We achieve a data density of 1.59 Gbit mm−3 in 301 layers for a capacity of 4.8 TB in a 120 mm square, 2 mm thick piece of glass. The demonstrated write regimes enable a write throughput of 25.6 Mbit s−1 per beam, limited by the laser repetition rate, with an energy efficiency of 10.1 nJ per bit. Moreover, we extend the storage ability to borosilicate glass, offering a lower-cost medium and reduced writing and reading complexity. Accelerated ageing tests on written voxels in borosilicate suggest data lifetimes exceeding 10,000 years.
- 18 February 2026
- Published by Springer Nature in Nature
- Vol. 650 (8102) , 606-612
Top Cited PapersOpen AccessLaser writing in glass for dense, fast and efficient archival data storage
Long-term preservation of digital information is vital for safeguarding the knowledge of humanity for future generations. Existing archival storage solutions, such as magnetic tapes and hard disk drives, suffer from limited media lifespans that render them unsuitable for long-term data retention1,2,3. Optical storage approaches, particularly laser writing in robust media such as glass, have emerged as promising alternatives with the potential for increased longevity. Previous work4,5,6,7,8,9,10,11,12,13,14,15,16 has predominantly optimized individual aspects such as data density but has not demonstrated an end-to-end system, including writing, storing and retrieving information. Here we report an optical archival storage technology based on femtosecond laser direct writing in glass that addresses the practical demands of archival storage, which we call Silica. We achieve a data density of 1.59 Gbit mm−3 in 301 layers for a capacity of 4.8 TB in a 120 mm square, 2 mm thick piece of glass. The demonstrated write regimes enable a write throughput of 25.6 Mbit s−1 per beam, limited by the laser repetition rate, with an energy efficiency of 10.1 nJ per bit. Moreover, we extend the storage ability to borosilicate glass, offering a lower-cost medium and reduced writing and reading complexity. Accelerated ageing tests on written voxels in borosilicate suggest data lifetimes exceeding 10,000 years.
- Open Access
- 17 November 2025
- Published by Wiley in Carbon Energy
- Vol. 8 (1)
Comparing the Indoor and Solar Performance of Light‐Concentrating Waveguide‐Encoded Lattice Slim Films
Although multicrystalline Si photovoltaics have been extensively studied and applied in the collection of solar energy, the same systems suffer significant efficiency losses in indoor settings, where ambient light conditions are considerably smaller in intensity and possess greater components of non‐normal incidence. Yet, indoor light‐driven, stand‐alone devices can offer sustainable advances in next‐generation technologies such as the Internet of Things. Here, we present a non‐invasive solution to aid in photovoltaic indoor light collection—radially distributed waveguide‐encoded lattice (RDWEL) slim films (thickness 1.5 mm). Embedded with a monotonical radial array of cylindrical waveguides (±20°), the RDWEL demonstrates seamless light collection (FoV (fields of view) = 74.5°) and imparts enhancements in J SC (short circuit current density) of 44% and 14% for indoor and outdoor lighting conditions, respectively, when coupled to a photovoltaic device and compared to an unstructured but otherwise identical slim film coating.
- 17 November 2025
- Published by Wiley in Carbon Energy
- Vol. 8 (1)
Open AccessComparing the Indoor and Solar Performance of Light‐Concentrating Waveguide‐Encoded Lattice Slim Films
Although multicrystalline Si photovoltaics have been extensively studied and applied in the collection of solar energy, the same systems suffer significant efficiency losses in indoor settings, where ambient light conditions are considerably smaller in intensity and possess greater components of non‐normal incidence. Yet, indoor light‐driven, stand‐alone devices can offer sustainable advances in next‐generation technologies such as the Internet of Things. Here, we present a non‐invasive solution to aid in photovoltaic indoor light collection—radially distributed waveguide‐encoded lattice (RDWEL) slim films (thickness 1.5 mm). Embedded with a monotonical radial array of cylindrical waveguides (±20°), the RDWEL demonstrates seamless light collection (FoV (fields of view) = 74.5°) and imparts enhancements in J SC (short circuit current density) of 44% and 14% for indoor and outdoor lighting conditions, respectively, when coupled to a photovoltaic device and compared to an unstructured but otherwise identical slim film coating.
- Open Access
- 26 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (47) , 19030-19034
Multilayer films for photon upconversion-driven photoswitching
Photoswitchable materials are of significant interest for diverse applications from energy and data storage to additive manufacturing and soft robotics. However, the absorption profile is often a limiting factor for practical applications. This can be overcome using indirect excitation via complementary photophysical pathways, such as triplet sensitisation or photon upconversion. Here, we demonstrate the use of triplet–triplet annihilation upconversion (TTA-UC) to drive photoswitching of the energy storing photoswitch norbornadiene–quadricyclane (NBD–QC) in the solid-state. A photoswitchable bilayer polymer film, incorporating the TTA-UC sensitiser–emitter pair of platinum octaethylporphyrin (PtOEP) and 9,10-diphenylanthracene (DPA), was used to trigger the photoinduced [2+2] cycloaddition of NBD to form QC using visible instead of UV light. The isolated TTA-UC film showed green-to-blue upconversion, with a competitive upconversion efficiency of (1.9 ± 0.1%) for the solid-state in air. Direct photoswitching of the isolated NBD film was demonstrated with a narrow UV light source (340 nm). However, in the bilayer film, spectral overlap between the upconverted blue emission in the TTA-UC film and the absorbance band of the NBD film resulted in indirect photoswitching using visible green light (532 nm, 1 W cm−2), thus extending the spectral operational window of the photoswitching film. The results demonstrate proof-of-feasibility of TTA-UC-promoted photoswitching in the solid-state, paving the way for potential applications in light-harvesting devices and smart coatings, using a wider selection of irradiation wavelengths.
- 26 November 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry C
- Vol. 12 (47) , 19030-19034
Open AccessMultilayer films for photon upconversion-driven photoswitching
Photoswitchable materials are of significant interest for diverse applications from energy and data storage to additive manufacturing and soft robotics. However, the absorption profile is often a limiting factor for practical applications. This can be overcome using indirect excitation via complementary photophysical pathways, such as triplet sensitisation or photon upconversion. Here, we demonstrate the use of triplet–triplet annihilation upconversion (TTA-UC) to drive photoswitching of the energy storing photoswitch norbornadiene–quadricyclane (NBD–QC) in the solid-state. A photoswitchable bilayer polymer film, incorporating the TTA-UC sensitiser–emitter pair of platinum octaethylporphyrin (PtOEP) and 9,10-diphenylanthracene (DPA), was used to trigger the photoinduced [2+2] cycloaddition of NBD to form QC using visible instead of UV light. The isolated TTA-UC film showed green-to-blue upconversion, with a competitive upconversion efficiency of (1.9 ± 0.1%) for the solid-state in air. Direct photoswitching of the isolated NBD film was demonstrated with a narrow UV light source (340 nm). However, in the bilayer film, spectral overlap between the upconverted blue emission in the TTA-UC film and the absorbance band of the NBD film resulted in indirect photoswitching using visible green light (532 nm, 1 W cm−2), thus extending the spectral operational window of the photoswitching film. The results demonstrate proof-of-feasibility of TTA-UC-promoted photoswitching in the solid-state, paving the way for potential applications in light-harvesting devices and smart coatings, using a wider selection of irradiation wavelengths.
- Open Access
- 26 July 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (16) , 12006-12015
Influence of Electron Donors on the Charge Transfer Dynamics of Carbon Nanodots in Photocatalytic Systems
Carbon nanodots (CNDs) are nanosized light-harvesters emerging as next-generation photosensitizers in photocatalytic reactions. Despite their ever-increasing potential applications, the intricacies underlying their photoexcited charge carrier dynamics are yet to be elucidated. In this study, nitrogen-doped graphitic CNDs (NgCNDs) are selectively excited in the presence of methyl viologen (MV2+, redox mediator) and different electron donors (EDs), namely ascorbic acid (AA) and ethylenediaminetetraacetic acid (EDTA). The consequent formation of the methyl viologen radical cation (MV center dot+) is investigated, and the excited charge carrier dynamics of the photocatalytic system are understood on a 0.1 ps-1 ms time range, providing spectroscopic evidence of oxidative or reductive quenching mechanisms experienced by optically excited NgCNDs (NgCNDs*) depending on the ED implemented. In the presence of AA, NgCNDs* undergo oxidative quenching by MV2+ to form MV center dot+, which is short-lived due to dehydroascorbic acid, a product of photoinduced hole quenching of oxidized NgCNDs. The EDTA-mediated reductive quenching of NgCNDs* is observed to be at least 2 orders of magnitude slower due to screening by EDTA-MV2+ complexes, but the MV center dot+ population is stable due to the irreversibly oxidized EDTA preventing a back reaction. In general, our methodology provides a distinct solution with which to study charge transfer dynamics in photocatalytic systems on an extended time range spanning 10 orders of magnitude. This approach generates a mechanistic understanding to select and develop suitable EDs to promote photocatalytic reactions.
- 26 July 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (16) , 12006-12015
Open AccessInfluence of Electron Donors on the Charge Transfer Dynamics of Carbon Nanodots in Photocatalytic Systems
Carbon nanodots (CNDs) are nanosized light-harvesters emerging as next-generation photosensitizers in photocatalytic reactions. Despite their ever-increasing potential applications, the intricacies underlying their photoexcited charge carrier dynamics are yet to be elucidated. In this study, nitrogen-doped graphitic CNDs (NgCNDs) are selectively excited in the presence of methyl viologen (MV2+, redox mediator) and different electron donors (EDs), namely ascorbic acid (AA) and ethylenediaminetetraacetic acid (EDTA). The consequent formation of the methyl viologen radical cation (MV center dot+) is investigated, and the excited charge carrier dynamics of the photocatalytic system are understood on a 0.1 ps-1 ms time range, providing spectroscopic evidence of oxidative or reductive quenching mechanisms experienced by optically excited NgCNDs (NgCNDs*) depending on the ED implemented. In the presence of AA, NgCNDs* undergo oxidative quenching by MV2+ to form MV center dot+, which is short-lived due to dehydroascorbic acid, a product of photoinduced hole quenching of oxidized NgCNDs. The EDTA-mediated reductive quenching of NgCNDs* is observed to be at least 2 orders of magnitude slower due to screening by EDTA-MV2+ complexes, but the MV center dot+ population is stable due to the irreversibly oxidized EDTA preventing a back reaction. In general, our methodology provides a distinct solution with which to study charge transfer dynamics in photocatalytic systems on an extended time range spanning 10 orders of magnitude. This approach generates a mechanistic understanding to select and develop suitable EDs to promote photocatalytic reactions.
- Open Access
- 27 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (11) , 6314-6322
Interplay of Luminophores and Photoinitiators during Synthesis of Bulk and Patterned Luminescent Photopolymer Blends
Four-dimensional printing with embedded photoluminescence is emerging as an exciting area in additive manufacturing. Slim polymer films patterned with three-dimensional lattices of multimode cylindrical waveguides (waveguide-encoded lattices, WELs) with enhanced fields of view can be fabricated by localizing light as self-trapped beams within a photopolymerizable formulation. Luminescent WELs have potential applications as solar cell coatings and smart planar optical components. However, as luminophore-photoinitiator interactions are expected to change the photopolymerization kinetics, the design of robust luminescent photopolymer sols is nontrivial. Here, we use model photopolymer systems based on methacrylate-siloxane and epoxide homopolymers and their blends to investigate the influence of the luminophore Lumogen Violet (LV) on the photolysis kinetics of the Omnirad 784 photoinitiator through UV-vis absorbance spectroscopy. Initial rate analysis with different bulk polymers reveals differences in the pseudo-first-order rate constants in the absence and presence of LV, with a notable increase (∼40%) in the photolysis rate for the 1:1 blend. Fluorescence quenching studies, coupled with density functional theory calculations, establish that these differences arise due to electron transfer from the photoexcited LV to the ground-state photoinitiator molecules. We also demonstrate an in situ UV-vis absorbance technique that enables real-time monitoring of both waveguide formation and photoinitiator consumption during the fabrication of WELs. The in situ photolysis kinetics confirm that LV-photoinitiator interactions also influence the photopolymerization process during WEL formation. Our findings show that luminophores play a noninnocent role in photopolymerization and highlight the necessity for both careful consideration of the photopolymer formulation and a real-time monitoring approach to enable the fabrication of high-quality micropatterned luminescent polymeric films.
- 27 May 2024
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 6 (11) , 6314-6322
Open AccessInterplay of Luminophores and Photoinitiators during Synthesis of Bulk and Patterned Luminescent Photopolymer Blends
Four-dimensional printing with embedded photoluminescence is emerging as an exciting area in additive manufacturing. Slim polymer films patterned with three-dimensional lattices of multimode cylindrical waveguides (waveguide-encoded lattices, WELs) with enhanced fields of view can be fabricated by localizing light as self-trapped beams within a photopolymerizable formulation. Luminescent WELs have potential applications as solar cell coatings and smart planar optical components. However, as luminophore-photoinitiator interactions are expected to change the photopolymerization kinetics, the design of robust luminescent photopolymer sols is nontrivial. Here, we use model photopolymer systems based on methacrylate-siloxane and epoxide homopolymers and their blends to investigate the influence of the luminophore Lumogen Violet (LV) on the photolysis kinetics of the Omnirad 784 photoinitiator through UV-vis absorbance spectroscopy. Initial rate analysis with different bulk polymers reveals differences in the pseudo-first-order rate constants in the absence and presence of LV, with a notable increase (∼40%) in the photolysis rate for the 1:1 blend. Fluorescence quenching studies, coupled with density functional theory calculations, establish that these differences arise due to electron transfer from the photoexcited LV to the ground-state photoinitiator molecules. We also demonstrate an in situ UV-vis absorbance technique that enables real-time monitoring of both waveguide formation and photoinitiator consumption during the fabrication of WELs. The in situ photolysis kinetics confirm that LV-photoinitiator interactions also influence the photopolymerization process during WEL formation. Our findings show that luminophores play a noninnocent role in photopolymerization and highlight the necessity for both careful consideration of the photopolymer formulation and a real-time monitoring approach to enable the fabrication of high-quality micropatterned luminescent polymeric films.
- Open Access
- 3 May 2024
- Published by American Chemical Society (ACS) in ChemRxiv
The Influence of Electron Donors on the Charge Transfer Dynamics of Carbon Nanodots in Photocatalytic Systems
Carbon nanodots are nanosized light-harvesters emerging as sustainable next-generation photosensitizers in photocatalytic reactions. Despite their ever-increasing potential applications, the intricate details underlying their photoexcited charge carrier dynamics are yet to be elucidated. In this study, nitrogen-doped graphitic carbon nanodots (NgCNDs) are selectively excited in the presence of methyl viologen (MV2+, redox mediator) and different electron donors, namely ascorbic acid (AA) and ethylenediaminetetraacetic acid (EDTA). The consequent formation of the methyl viologen radical cation (MV·+) is investigated, and the excited charge carrier dynamics of the photocatalytic system are understood on a 0.1 ps to 1 ms time range, providing spectroscopic evidence of oxidative or reductive quenching mechanisms experienced by optically excited NgCNDs (NgCNDs*) depending on the electron donor implemented. In the presence of AA, NgCNDs* undergo oxidative quenching by MV2+ to form MV·+, but is short-lived due to dehydroascorbic acid, a product of photoinduced hole quenching of oxidized NgCNDs. The EDTA-mediated reductive quenching of NgCNDs* is observed to be at least two orders of magnitude slower due to screening by EDTA-MV2+ complexes, but the MV·+ population is stable due to the irreversibly oxidized EDTA preventing a back reaction. In general, our methodology provides a distinct solution with which to study charge transfer dynamics in photocatalytic systems on an extended time range spanning 10 orders of magnitude. This approach generates a mechanistic understanding to select and develop suitable electron donors to promote photocatalytic reactions.
- 3 May 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessThe Influence of Electron Donors on the Charge Transfer Dynamics of Carbon Nanodots in Photocatalytic Systems
Carbon nanodots are nanosized light-harvesters emerging as sustainable next-generation photosensitizers in photocatalytic reactions. Despite their ever-increasing potential applications, the intricate details underlying their photoexcited charge carrier dynamics are yet to be elucidated. In this study, nitrogen-doped graphitic carbon nanodots (NgCNDs) are selectively excited in the presence of methyl viologen (MV2+, redox mediator) and different electron donors, namely ascorbic acid (AA) and ethylenediaminetetraacetic acid (EDTA). The consequent formation of the methyl viologen radical cation (MV·+) is investigated, and the excited charge carrier dynamics of the photocatalytic system are understood on a 0.1 ps to 1 ms time range, providing spectroscopic evidence of oxidative or reductive quenching mechanisms experienced by optically excited NgCNDs (NgCNDs*) depending on the electron donor implemented. In the presence of AA, NgCNDs* undergo oxidative quenching by MV2+ to form MV·+, but is short-lived due to dehydroascorbic acid, a product of photoinduced hole quenching of oxidized NgCNDs. The EDTA-mediated reductive quenching of NgCNDs* is observed to be at least two orders of magnitude slower due to screening by EDTA-MV2+ complexes, but the MV·+ population is stable due to the irreversibly oxidized EDTA preventing a back reaction. In general, our methodology provides a distinct solution with which to study charge transfer dynamics in photocatalytic systems on an extended time range spanning 10 orders of magnitude. This approach generates a mechanistic understanding to select and develop suitable electron donors to promote photocatalytic reactions.
- Open Access
- 14 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Interplay of Luminophores and Photoinitiators During Synthesis of Bulk and Patterned Luminescent Photopolymer Blends
Four-dimensional printing with embedded photoluminescence is emerging as an exciting area in additive manufacturing. Slim polymer films patterned with three-dimensional lattices of multimode, cylindrical waveguides (waveguide-encoded lattices, WELs) with enhanced fields of view can be fabricated by localizing light as self-trapped beams within a photopolymerizable formulation. Luminescent WELs have potential applications as solar cell coatings and smart, planar optical components. However, as luminophore-photoinitiator interactions are expected to change photopolymerization kinetics, the design of robust luminescent photopolymer sols is non-trivial. Here, we use model photopolymer systems based on methacrylate-siloxane and epoxide homopolymers, and their blends to investigate the influence of the luminophore Lumogen® Violet (LV) on the photolysis kinetics of the Omnirad™ 784 photoinitiator through UV/Vis absorbance spectroscopy. Initial rate analysis with different bulk polymers reveals differences in the first-order rate constants in the absence and presence of LV, with a notable increase (40%) in the photolysis rate for the 1:1 blend. Fluorescence quenching studies, coupled with density functional theory calculations, establish that these differences arise due to electron transfer from photoexcited LV to the ground state photoinitiator molecules. We also demonstrate an in-situ UV/Vis absorbance technique that enables real-time monitoring of both waveguide formation and photoinitiator consumption during the fabrication of WELs. The in-situ photolysis kinetics confirm that LV-photoinitiator interactions also influence the photopolymerization process during WEL formation. Our findings show that luminophores play a non-innocent role in photopolymerization and highlight the necessity for both careful consideration of the photopolymer formulation and a real-time monitoring approach to enable the fabrication of high-quality micropatterned luminescent polymeric films.
- 14 February 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessInterplay of Luminophores and Photoinitiators During Synthesis of Bulk and Patterned Luminescent Photopolymer Blends
Four-dimensional printing with embedded photoluminescence is emerging as an exciting area in additive manufacturing. Slim polymer films patterned with three-dimensional lattices of multimode, cylindrical waveguides (waveguide-encoded lattices, WELs) with enhanced fields of view can be fabricated by localizing light as self-trapped beams within a photopolymerizable formulation. Luminescent WELs have potential applications as solar cell coatings and smart, planar optical components. However, as luminophore-photoinitiator interactions are expected to change photopolymerization kinetics, the design of robust luminescent photopolymer sols is non-trivial. Here, we use model photopolymer systems based on methacrylate-siloxane and epoxide homopolymers, and their blends to investigate the influence of the luminophore Lumogen® Violet (LV) on the photolysis kinetics of the Omnirad™ 784 photoinitiator through UV/Vis absorbance spectroscopy. Initial rate analysis with different bulk polymers reveals differences in the first-order rate constants in the absence and presence of LV, with a notable increase (40%) in the photolysis rate for the 1:1 blend. Fluorescence quenching studies, coupled with density functional theory calculations, establish that these differences arise due to electron transfer from photoexcited LV to the ground state photoinitiator molecules. We also demonstrate an in-situ UV/Vis absorbance technique that enables real-time monitoring of both waveguide formation and photoinitiator consumption during the fabrication of WELs. The in-situ photolysis kinetics confirm that LV-photoinitiator interactions also influence the photopolymerization process during WEL formation. Our findings show that luminophores play a non-innocent role in photopolymerization and highlight the necessity for both careful consideration of the photopolymer formulation and a real-time monitoring approach to enable the fabrication of high-quality micropatterned luminescent polymeric films.
- Open Access
- 26 June 2023
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 13 (13) , 9090-9101
Low-Volume Reaction Monitoring of Carbon Dot Light Absorbers in Optofluidic Microreactors
Optical monitoring and screening of photocatalytic batch reactions using cuvettes ex situ is time-consuming, requires substantial amounts of samples, and does not allow the analysis of species with low extinction coefficients. Hollow-core photonic crystal fibers (HC-PCFs) provide an innovative approach for in situ reaction detection using ultraviolet-visible absorption spectroscopy, with the potential for high-throughput automation using extremely low sample volumes with high sensitivity for monitoring of the analyte. HC-PCFs use interference effects to guide light at the center of a microfluidic channel and use this to enhance detection sensitivity. They open the possibility of comprehensively studying photocatalysts to extract structure-activity relationships, which is unfeasible with similar reaction volume, time, and sensitivity in cuvettes. Here, we demonstrate the use of HC-PCF microreactors for the screening of the electron transfer properties of carbon dots (CDs), a nanometer-sized material that is emerging as a homogeneous light absorber in photocatalysis. The CD-driven photoreduction reaction of viologens (XV2+) to the corresponding radical monocation XV•+ is monitored in situ as a model reaction, using a sample volume of 1 μL per measurement and with a detectability of i.e., amorphous, graphitic, and graphitic nitrogen-doped CDs), surface chemistry, viologens, and electron donors. Furthermore, the excitation irradiance was varied to study its effect on the photoreduction rate. The findings are correlated with the electron transfer properties of CDs based on their electronic structure characterized by soft X-ray absorption spectroscopy. Optofluidic microreactors with real-time optical detection provide unique insight into the reaction dynamics of photocatalytic systems and could form the basis of future automated catalyst screening platforms, where samples are only available on small scales or at a high cost.
- 26 June 2023
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 13 (13) , 9090-9101
Open AccessLow-Volume Reaction Monitoring of Carbon Dot Light Absorbers in Optofluidic Microreactors
Optical monitoring and screening of photocatalytic batch reactions using cuvettes ex situ is time-consuming, requires substantial amounts of samples, and does not allow the analysis of species with low extinction coefficients. Hollow-core photonic crystal fibers (HC-PCFs) provide an innovative approach for in situ reaction detection using ultraviolet-visible absorption spectroscopy, with the potential for high-throughput automation using extremely low sample volumes with high sensitivity for monitoring of the analyte. HC-PCFs use interference effects to guide light at the center of a microfluidic channel and use this to enhance detection sensitivity. They open the possibility of comprehensively studying photocatalysts to extract structure-activity relationships, which is unfeasible with similar reaction volume, time, and sensitivity in cuvettes. Here, we demonstrate the use of HC-PCF microreactors for the screening of the electron transfer properties of carbon dots (CDs), a nanometer-sized material that is emerging as a homogeneous light absorber in photocatalysis. The CD-driven photoreduction reaction of viologens (XV2+) to the corresponding radical monocation XV•+ is monitored in situ as a model reaction, using a sample volume of 1 μL per measurement and with a detectability of i.e., amorphous, graphitic, and graphitic nitrogen-doped CDs), surface chemistry, viologens, and electron donors. Furthermore, the excitation irradiance was varied to study its effect on the photoreduction rate. The findings are correlated with the electron transfer properties of CDs based on their electronic structure characterized by soft X-ray absorption spectroscopy. Optofluidic microreactors with real-time optical detection provide unique insight into the reaction dynamics of photocatalytic systems and could form the basis of future automated catalyst screening platforms, where samples are only available on small scales or at a high cost.
- Open Access
- 18 January 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (9) , e202214788
In situ Detection of Cobaloxime Intermediates During Photocatalysis Using Hollow‐Core Photonic Crystal Fiber Microreactors
Hollow‐core photonic crystal fibers (HC‐PCFs) provide a novel approach for in situ UV/Vis spectroscopy with enhanced detection sensitivity. Here, we demonstrate that longer optical path lengths than afforded by conventional cuvette‐based UV/Vis spectroscopy can be used to detect and identify the CoI and CoII states in hydrogen‐evolving cobaloxime catalysts, with spectral identification aided by comparison with DFT‐simulated spectra. Our findings show that there are two types of signals observed for these molecular catalysts; a transient signal and a steady‐state signal, with the former being assigned to the CoI state and the latter being assigned to the CoII state. These observations lend support to a unimolecular pathway, rather than a bimolecular pathway, for hydrogen evolution. This study highlights the utility of fiber‐based microreactors for understanding these and a much wider range of homogeneous photocatalytic systems in the future.
- 18 January 2023
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 62 (9) , e202214788
Open AccessIn situ Detection of Cobaloxime Intermediates During Photocatalysis Using Hollow‐Core Photonic Crystal Fiber Microreactors
Hollow‐core photonic crystal fibers (HC‐PCFs) provide a novel approach for in situ UV/Vis spectroscopy with enhanced detection sensitivity. Here, we demonstrate that longer optical path lengths than afforded by conventional cuvette‐based UV/Vis spectroscopy can be used to detect and identify the CoI and CoII states in hydrogen‐evolving cobaloxime catalysts, with spectral identification aided by comparison with DFT‐simulated spectra. Our findings show that there are two types of signals observed for these molecular catalysts; a transient signal and a steady‐state signal, with the former being assigned to the CoI state and the latter being assigned to the CoII state. These observations lend support to a unimolecular pathway, rather than a bimolecular pathway, for hydrogen evolution. This study highlights the utility of fiber‐based microreactors for understanding these and a much wider range of homogeneous photocatalytic systems in the future.