Changbin Dong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Changbin Dong has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
Yongping Liu
20 shared publications- Yongping Liu
School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou, China
7 shared publications Fuqiang Wang
Lanzhou University of Technology
4 shared publicationsLongkun Li
3 shared publicationsXudong Yang
Lanzhou University of Technology
3 shared publicationsDawei Li
Lanzhou Univ Technol, Sch Mech & Elect Engn, Lanzhou, Peoples R China
2 shared publications
Latest Publications
- 31 October 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
Mechanical Metamaterial Based on Non-Circular Planetary Gear Train with Continuously Tunable Mechanical Properties
The geometric degrees of freedom of non-circular gears provide a means for continuously tuning mechanical metamaterials. However, the relationship between pitch design and load-bearing and vibration responses still needs to be clarified. In this paper, we construct a mechanical metamaterial consisting of a fourth-order non-circular sun gear, a sixth-order non-circular ring gear, and four cylindrical planet gears, using the sun gear’s angular position as the configuration control variable. By using high-order elliptic pitch curves and enveloping-generated tooth surfaces, we transform the rotational input into changes in the ring gear's support positions and the effective bending span. Simulations of contact motion and finite element analysis jointly reveal the relationship between geometric encoding, support migration, and load path reconstruction. During combined compression and rotation, the equivalent compressive modulus in the gauge region varies between 5.15 and 117.96 GPa, with a tuning ratio of 22.9. The 2×2 and 3×3 finite arrays preserve configuration-dependent stress migration through shared walls and facilitate load sharing between unit cells. Modal and harmonic response analyses of fixed configurations indicate that the angle of rotation simultaneously alters the distribution of mode shapes as well as the positions of resonance peaks and anti-resonance troughs. These results link non-circular gear geometry with configuration-dependent mechanics, providing a design basis for continuous stiffness adjustment and vibration response control in load-bearing structures.
- 31 October 2026
- Published by World Scientific Pub Co Pte Ltd in International Journal of Applied Mechanics
Mechanical Metamaterial Based on Non-Circular Planetary Gear Train with Continuously Tunable Mechanical Properties
The geometric degrees of freedom of non-circular gears provide a means for continuously tuning mechanical metamaterials. However, the relationship between pitch design and load-bearing and vibration responses still needs to be clarified. In this paper, we construct a mechanical metamaterial consisting of a fourth-order non-circular sun gear, a sixth-order non-circular ring gear, and four cylindrical planet gears, using the sun gear’s angular position as the configuration control variable. By using high-order elliptic pitch curves and enveloping-generated tooth surfaces, we transform the rotational input into changes in the ring gear's support positions and the effective bending span. Simulations of contact motion and finite element analysis jointly reveal the relationship between geometric encoding, support migration, and load path reconstruction. During combined compression and rotation, the equivalent compressive modulus in the gauge region varies between 5.15 and 117.96 GPa, with a tuning ratio of 22.9. The 2×2 and 3×3 finite arrays preserve configuration-dependent stress migration through shared walls and facilitate load sharing between unit cells. Modal and harmonic response analyses of fixed configurations indicate that the angle of rotation simultaneously alters the distribution of mode shapes as well as the positions of resonance peaks and anti-resonance troughs. These results link non-circular gear geometry with configuration-dependent mechanics, providing a design basis for continuous stiffness adjustment and vibration response control in load-bearing structures.
- 11 September 2026
- Published by Elsevier in Precision Engineering
High-Order Tooth-Surface Modification and Performance Evaluation of Involute Beveloid Gears
- 11 September 2026
- Published by Elsevier in Precision Engineering
High-Order Tooth-Surface Modification and Performance Evaluation of Involute Beveloid Gears
- 25 June 2026
- Published by Springer Nature
- p. 822-839
Analysis of Time Varying Motion and Contact Characteristics of Curve-Face Gear Compound Mechanism
- 25 June 2026
- Published by Springer Nature
- p. 822-839
Analysis of Time Varying Motion and Contact Characteristics of Curve-Face Gear Compound Mechanism
- 30 April 2026
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 114 (9) , 628
Research on the nonlinear response characteristics of non-circular gear planetary gear train under time-varying parameter excitation
- 30 April 2026
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 114 (9) , 628
Research on the nonlinear response characteristics of non-circular gear planetary gear train under time-varying parameter excitation
- 23 January 2026
- Published by Wiley in Lubrication Science
- Vol. 38 (3) , 111-129
Analysis of TEHL Characteristics of Modified VH‐CATT Cylindrical Gear
Addressing the challenges of inadequate lubrication performance and limited thermal stability of variable hyperbolic circular‐arc‐tooth‐trace (VH‐CATT) cylindrical gear pairs under conditions of high speed and heavy load, this study presents a multi‐field coupled thermo‐elastohydrodynamic lubrication (TEHL) model. The model integrates cutter tilt‐induced lead modification, tooth contact analysis (TCA), finite element‐based contact mechanics and thermal‐elastohydrodynamic lubrication simulations. By selecting representative meshing instances, the research systematically examines the combined influence of entrainment angle ( θ ₑ) and lead modification angle ( γ ) on key parameters, including oil film thickness, pressure distribution and temperature elevation. The findings indicate that when θ ₑ deviates from 0° to either less than 0° or greater than 0°, the minimum oil film thickness decreases by approximately 5.03%. Concurrently, the maximum oil film pressure exhibits an increase of 22.33% and a decrease of 21.14%, respectively, while the temperature rise diminishes by 63.81% and 34.12%, respectively. Upon the introduction of lead modification with γ set at 5°, variations in θ ₑ below and above 0° result in reductions in minimum oil film thickness by 4.29% and 4.81%, respectively; decreases in maximum pressure by 8.89% and 3.97%, respectively; and changes in temperature rise characterised by a decrease of 83.75% and an increase of 72.94%, respectively. A comprehensive evaluation suggests that maintaining θ ₑ within the range of 0°–5°, alongside γ fixed at 5°, facilitates the synergistic optimisation of lubrication integrity, load‐bearing capacity and thermal management performance. This insight offers a theoretical framework and practical foundation for enhancing lubrication efficacy and structural design of VH‐CATT cylindrical gear pairs under complex thermal loading conditions.
- 23 January 2026
- Published by Wiley in Lubrication Science
- Vol. 38 (3) , 111-129
Analysis of TEHL Characteristics of Modified VH‐CATT Cylindrical Gear
Addressing the challenges of inadequate lubrication performance and limited thermal stability of variable hyperbolic circular‐arc‐tooth‐trace (VH‐CATT) cylindrical gear pairs under conditions of high speed and heavy load, this study presents a multi‐field coupled thermo‐elastohydrodynamic lubrication (TEHL) model. The model integrates cutter tilt‐induced lead modification, tooth contact analysis (TCA), finite element‐based contact mechanics and thermal‐elastohydrodynamic lubrication simulations. By selecting representative meshing instances, the research systematically examines the combined influence of entrainment angle ( θ ₑ) and lead modification angle ( γ ) on key parameters, including oil film thickness, pressure distribution and temperature elevation. The findings indicate that when θ ₑ deviates from 0° to either less than 0° or greater than 0°, the minimum oil film thickness decreases by approximately 5.03%. Concurrently, the maximum oil film pressure exhibits an increase of 22.33% and a decrease of 21.14%, respectively, while the temperature rise diminishes by 63.81% and 34.12%, respectively. Upon the introduction of lead modification with γ set at 5°, variations in θ ₑ below and above 0° result in reductions in minimum oil film thickness by 4.29% and 4.81%, respectively; decreases in maximum pressure by 8.89% and 3.97%, respectively; and changes in temperature rise characterised by a decrease of 83.75% and an increase of 72.94%, respectively. A comprehensive evaluation suggests that maintaining θ ₑ within the range of 0°–5°, alongside γ fixed at 5°, facilitates the synergistic optimisation of lubrication integrity, load‐bearing capacity and thermal management performance. This insight offers a theoretical framework and practical foundation for enhancing lubrication efficacy and structural design of VH‐CATT cylindrical gear pairs under complex thermal loading conditions.
- 10 December 2025
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 39 (12) , 7425-7435
Analysis for meshing stiffness and transmission error of non-circular gear based on finite element method
- 10 December 2025
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 39 (12) , 7425-7435
Analysis for meshing stiffness and transmission error of non-circular gear based on finite element method
- 17 October 2025
- Published by Elsevier in Precision Engineering
- Vol. 97, 632-649
Vibration suppression strategy of elliptical gears based on configuration optimization design
- 17 October 2025
- Published by Elsevier in Precision Engineering
- Vol. 97, 632-649
Vibration suppression strategy of elliptical gears based on configuration optimization design
- 4 September 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (9) , 095005
A new method for analyzing tooth surface meshing characteristics of helical non-circular gears based on tooth surface topology structure
Helical non-circular gears (HNCGs) can improve load-bearing capacity while ensuring variable ratio transmission. Nevertheless, the differences between tooth profiles make it difficult to obtain the dynamic meshing characteristics, which seriously affects the application and promotion of HNCG. Thus, the paper focuses on the dynamic meshing process of HNCG, and a finite element model of the full tooth surface loaded contact based on tooth surface topology structure will be established. The distribution patterns of strain, stress, pressure, displacement, angular velocity, and angular acceleration of the tooth surface meshing unit is obtained. The dynamic matching mechanism between the meshing characteristics mentioned above and the distribution position of gear teeth is explored, and a method for constructing a full tooth surface meshing dataset is obtained. The results indicate that the differences between the tooth profiles of HNCG are also mapped to the distribution pattern of tooth surface meshing data, and the meshing characteristics are closely related to the distribution position of the teeth on the pitch curve. With the different distribution positions of gear teeth on the pitch curve, the displacement, velocity, and tooth surface pressure of the contact points of HNCG show a gradually increasing distribution pattern along the long axis of the pitch curve towards the short axis end, and the von-Mises stress shows a decreasing distribution pattern along the long axis of the pitch curve towards the short axis end. The analysis method proposed in this article can provide theoretical basis and technical support for the analysis of dynamic transmission characteristics of other types of complex profile gears.
- 4 September 2025
- Published by IOP Publishing in Measurement Science and Technology
- Vol. 36 (9) , 095005
A new method for analyzing tooth surface meshing characteristics of helical non-circular gears based on tooth surface topology structure
Helical non-circular gears (HNCGs) can improve load-bearing capacity while ensuring variable ratio transmission. Nevertheless, the differences between tooth profiles make it difficult to obtain the dynamic meshing characteristics, which seriously affects the application and promotion of HNCG. Thus, the paper focuses on the dynamic meshing process of HNCG, and a finite element model of the full tooth surface loaded contact based on tooth surface topology structure will be established. The distribution patterns of strain, stress, pressure, displacement, angular velocity, and angular acceleration of the tooth surface meshing unit is obtained. The dynamic matching mechanism between the meshing characteristics mentioned above and the distribution position of gear teeth is explored, and a method for constructing a full tooth surface meshing dataset is obtained. The results indicate that the differences between the tooth profiles of HNCG are also mapped to the distribution pattern of tooth surface meshing data, and the meshing characteristics are closely related to the distribution position of the teeth on the pitch curve. With the different distribution positions of gear teeth on the pitch curve, the displacement, velocity, and tooth surface pressure of the contact points of HNCG show a gradually increasing distribution pattern along the long axis of the pitch curve towards the short axis end, and the von-Mises stress shows a decreasing distribution pattern along the long axis of the pitch curve towards the short axis end. The analysis method proposed in this article can provide theoretical basis and technical support for the analysis of dynamic transmission characteristics of other types of complex profile gears.