VKV. M. Kornyushin

V. M. Kornyushin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


V. M. Kornyushin has a total of 18 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Development of a combined unit for tillage and sowing green manure

    by V. A. Nasonov, V. M. Kornіushyn, M. O. Sidiy

    Purpose. Reduction of costs for tillage and sowing of green manure crops, creation of competitive means of mechanization of domestic production for import substitution. Methods. Analytical and experimental laboratory and field researches, standard test methods using the developed prototype of the combined unit. Results. A combined unit for tillage and sowing green manure has been developed, tested and recommended for production. Conclusions. An analysis of the technology of simultaneous tillage and sowing of green manure and designs of machines of foreign companies was carried out, on the basis of which a combined tillage and sowing unit based on a disc cultivator KD-6 and a mini seeder for sowing green manure crops “Turbo Jet Super 8” was developed. According to the developed drawings, a prototype of the combined tillage and sowing unit was made. The working width of the unit is 6 m, the adjustable depth of tillage and green manure sowing is 2–5 cm, the working speed of movement is up to 15 km/h, the adjustable seeding rate is 2–150 kg/ha, the capacity of the seed hopper is 200 dm3, the distance between the plate reflectors is 750 mm, the height of the reflectors above the soil surface is 780 mm, the required tractor power is from 220 hp. Laboratory researches have established that at a given seeding rate of mustard seeds of 20 kg/ha, the unit provides its dosage with an unevenness of 4.7–5.3 % and a sowing instability of 0.38 %. Laboratory and field researches and tests of the developed combined unit on an area of 45 hectares showed that it reliably performs tillage to a depth of 2.9–3.6 cm and sowing mustard on green manure at a rate of 20 kg/ha. During the experiments, the soil hardness in the horizon of 0–10 cm was in the range of 300–2020 MPa, and the humidity was 22.6–32.5 %. At different speeds of the unit (8.3, 11.4 and 14.4 km/h), the unevenness of the cultivation depth was 24.5–31.0 %, and the surface ridge did not exceed 2.4 cm. Seed germination in experimental plots was in the range of 69–72 %, uneven distribution of plants over the area was 7.2–11.2 %. It was found that with an increase in the speed of the unit from 8.3 km/h to 14.4 km/h, the fuel consumption of the Claas Axion 930 tractor increases from 5.2 l/ha to 6.8 l/ha, and the productivity – from 4.8 ha/h to 8.4 ha/h with an actual working width of the unit of 5.8 m. The combination of tillage and green manure sowing operations with the developed combined unit reduces labor and fuel costs respectively by 33 % and 34 % in comparison with the separate performance of tillage and sowing works. Import substitution contributes to the reduction of capital expenditures by agricultural enterprises for the purchase of machinery, guarantees the profit of the manufacturer (15–20 % of the cost of the units sold). Based on the test results, the design documentation was corrected. The unit is recommended for production at the enterprise Krasnyanskoye JV Agromash LLC. Keywords: combined unit, implements, mini seeder, green manure soil, tests.

  • Modernized seeding unit of the “Selena” seeder for economical multi-tape sowing of hybrid seeds of small-seeded vegetable crops

    by І. F. Savchenko, P. A. Rykhlivskyi, E. B. Shynkevich, V. M. Kornyushyn, O. O Konoval, Maroš Korenko

    Purpose. Ensuring minimization of seed residue in the seed chamber of the “Selena” seeder during multi-belt sowing of small-seeded vegetable crops. Methods. The research was carried out using the methods of structural modeling and design, mathematical statistics and analytical processing of experimental data. Results. A technical solution was developed to improve the seeding devices of the pneumatic vegetable seeder of precision sowing “Selena” in order to ensure complete, residue-free seeding of small- seeded vegetable crops in the hopper during multi-belt sowing. The design of the seeder was finalized and changes were made to the prototype, its bench tests were conducted, and a positive result was obtained. According to the test results, three seeding sections of the “Selena” seeder were re-equipped. Production tests of the “Selena” seeder with modified seeding devices were carried out at the State Enterprise “Subsidiary Farm of the SBU” of the Fastiv district of the Kyiv region. It was confirmed that the full sowing of expensive seeds of table carrots and table beets with the recommended sowing accuracy and distribution of plants in a row in the field was ensured. Conclusions. The results of experimental and production tests confirmed that the proposed technical solution for the modernization of seeding devices ensures the minimization of seed residues in the additional seed chamber of the seeding devices of the “Selena” pneumatic vegetable seeder during multi- tape sowing of expensive hybrid seeds of small-seeded vegetable crops. Keywords: small-seeded vegetable crops, precision sowing, Selena seeder, seeding devices, modernization, additional seed chamber, setting complete emptying of the chamber.

  • Test results of vertical tillage equipment VT-3.1

    by INSTITUTE of MECHANICS and AUTOMATICS of AGROINDUSTRIAL PRODUCTION of the NATIONAL ACADEMY of AGRARIAN SCIENCES of UKRAINE, V. A. Nasonov, V. M. Korniushyn, R. V. Kotsiubanskyi, A. I. Fenenko

    Purpose. Determine the dependence of tillage quality indicators and fuel consumption on the settings of the unit with the new VT-3.1 implement. Methods. Experimental. Standard methods were used to measure the depth of cultivation, crumbling, surface ridge, soil hardness and moisture and fuel consumption at different angles of attack of the disc working bodies of the tool. Results. Indicators of the quality of tillage and fuel consumption at different angles of attack of the disc working bodies of the tool are determined. It has been established that with an increase in the angles of attack, the quality of soil crumbling improves, the depth of cultivation and fuel consumption increases. Conclusions. The VT-3.1 implements have a wide range of adjustment of the angles of attack of the disc working bodies (from 0 to 25º), due to which it can be used for shallow vertical tillage (angles of attack 0–8º), for stubble breaking (10–15º), or deep disking of soil at higher angles of attack. With an increase in the angle of attack of the working bodies from 12º to 24º, the average depth of cultivation increases from 6.4 ± 2.7 cm to 13.3 ± 3.3 cm, and the crumbling of the soil improves. At the same time, fuel consumption increases from 3.3 to 11.25 l/ha. The crest of the surface in the experiments did not exceed 3 cm. Keywords: gun, soil, tests, indicators, angle of attack.

  • Development of a combined unit for strip tillage

    by V. V. Adamchuk, Y. B. Ponomar, V. A. Nasonov, V. M. Kornіushyn, M. O. Sidiy

    Purpose. Reducingcosts and increasing the productivity of strip tillage for row crops by creating and implementing a competitive combined uniting domestic production. Methods. Analytical and experimental laboratory-field studies, standard test methods using the developed prototype units. Results. A combined unit for strip tillage with local application of mineral fertilizers was developed, tested and put into production. Conclusions. Developed, manufactured and tested a combined unit consisting of the sowing module MB-5 and tools for strip tillage ASOG-8D, which has a working width of 5.6 m, performs tillage to a depth of 35 cm in strips 30–35 cm wide and application of granular mineral fertilizers with a dose of 50 to 400 kg/ha in two soil horizons to an adjustable depth from 0 to 35 cm. The distance between the stripes is 70 cm. During the tests, the combined unit tillage on the field after harvesting soybeans to a depth of 28 ± 2 cm and applied fertilizers at a given dose of 100kg/ha. Ensured the uneven distribution of fertilizers among the working bodies of 11.2 % and their milling into the soil in two horizons to a depth of 5– 10 and 15–20 cm. The average speedof the unitwas 7.1 km/h, productivity – 3.9 ha/h, fuel consumption – 17.2 l/ha. According to the test results, the design documentation has been adjusted. The unit was put to production at the enterprise LLC Krasnyanske JV Agromash. Keywords: combined unit, tools, strip tillage, sowing module, fertilization, testing.


  • Development of a combined unit for chisel tillage and local fertilization

    by Institute of Mechanics and Automatics of Agroindustrial Production of the NAAS, V. V. Adamchuk, V. A. Nasonov, L. K. Litvinyuk., V. M. Kornyushin, M. O. Sidiy

    Purpose. Reduction of material costs for chisel tillage operations and fertilizer application by creating a competitive unit of domestic production. Methods. Analytical and experimental laboratory and field studies, standard test methods using the developed prototype unit. Results. A combined unit for chisel tillage with local application of mineral fertilizers was developed, tested and put into production, as well as separate technical means included in its design. Conclusions. A combined unit for chisel tillage and local application of fertilizers was developed, manufactured and tested, consisting of an universal seeding module MV-5 and a chisel tool Ch-3 with a working width of 3.0 m, which performs chisel tillage to a depth of 45 cm and application of fertilizers with a dose of up to 400 kg/ha in two horizons to a depth of 0 to 45 cm, levels and compacts the soil. During the tests of the unit with the set dose of fertilizer application of 150 kg/ha, the unevenness of their application on the working bodies was found to be 8.6 % and their placement at a depth of 15 and 30 cm. The depth of soil cultivation was 30 ± 2 cm, the average speed of the unit was 7.0 km/h, productivity – 1.8 ha/h, fuel consumption – 21.4 l/ha. Based on the results of the tests, the design documentation was adjusted. The unit and its components: the universal seeding module MV-5 and the chisel tool Ch-3 were put into production at the enterprise “Krasnianske JV Agromash”. Keywords: combined unit, seeding module, chisel tool, tillage, fertilization, testing.


  • Technique-technological prerequisites for improving soil fertility

    by L. K. Litvinyuk, O. F. Govorov, V. V. Adamchuk, V. M. Kornyushin, A. D. Chaychuk, B. Ya. Gashevsky

    Annotation Purpose. Improving soil fertility due to new technical and technological support for rational methods of processing and using by-products of crop production as fertilizer. Methods. Generalization of the monographic results of experimental research of combined machines and other printed materials. Results. The reasons for the decrease in soil fertility are given; the technological operation for increasing soil fertility, which consists of grinding plant residues, introducing a destructor and mixing them in a soil layer at a depth of 10–12 cm when processing the soil to 16 cm, is justified, a combined unit for its implementation has been developed. Conclusions. The structural and functional scheme of the combined unit for increasing soil fertility, consisting of an energy source, on the front hitch of which a crop shredder with a horizontal axis of rotation and hammer working bodies for grinding plant residues is hung, on the rear hitch a combined machine with active scapular and passive working bodies is justified for processing the soil to a depth of 16 cm, and a tank for the destructor is installed on the frame, which ensures its introduction and mixing with the soil to a depth of 10–12 cm without a time gap, which increases the efficiency of the destructor's action on improving soil fertility. Keywords: soil fertility, plant residues, shredder, destructor, active-passive working bodies.