Mohammad Mehrabi Gohari
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mohammad Mehrabi Gohari has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Joachim Oberhammer
KTH Royal Institute of Technology
11 shared publications - Umer Shah
Department of Micro and Nanosystems, KTH Royal Institute of Technology, Stockholm, Sweden
6 shared publications - Alireza Madannejad
Department of Electrical Engineering, Division MST, Royal Institute of Technology, KTH, Stockholm, Sweden
5 shared publications - Oleksandr Glubokov
Division of Micro and Nanosystems, KTH Royal Institute of Technology, Stockholm, Sweden
5 shared publications - Mohammad-Reza Seidi
Microsystem Technology Laboratory, School of Electrical Engineering, Royal Institute of Technology (KTH), Stockholm, Sweden
2 shared publications - Arash Arsanjani
Institute of Microwave and Photonic Engineering, Graz University of Technology, Graz, Austria
1 shared publication
Latest Publications
- Open Access
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 8423-8431
Passive Beam-Steering of High-Gain THz Planar Lens Antenna by Frequency-Orthogonal Spatial Spreading
This paper presents the first demonstration of a high-gain planar THz lens antenna with beam-steering capability by frequency-orthogonal spatial spreading, operating in the 610–685 GHz range. The antenna is based on integrating a Fresnel zone planar lens with a graded-index silicon interposer. The concept enables passive beamforming of four simultaneous beams from a single feeding port, covering a field of view from -30° to -14° for 20 GHz bandwidth with a 4° separation of the beam direction. The beams can be swept continuously over that field of view by mapping the signal to different frequencies. Furthermore, when using four feeds, 16 simultaneous beams can be created, of which two frequency-orthogonal beams are separated by 40 GHz in frequency can be mapped into the same spatial direction. Thus, it is demonstrated that high-gain multibeam beam steering can be achieved without the hardware complexity of conventional phased-array antenna systems requiring a large number of RF chains. An antenna prototype is implemented using silicon micromachining, resulting in a compact 15.8 mm × 15.8 mm device with a thickness of 526μm, which is directly mounted on a standard WM-380 waveguide feed. Measurement results include a realized gain of 32.1 dBi, only a 0.8 dB beam steering loss across the field of view, an effective side-lobe suppression better than -22 dB, and a high radiation efficiency of -1.25 dB. The measurements are in excellent agreement with simulations, and the worst-case deviation of the measured beam direction from the simulated one is only 0.1° out of 16 beams.
- 23 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (11) , 8423-8431
Open AccessPassive Beam-Steering of High-Gain THz Planar Lens Antenna by Frequency-Orthogonal Spatial Spreading
This paper presents the first demonstration of a high-gain planar THz lens antenna with beam-steering capability by frequency-orthogonal spatial spreading, operating in the 610–685 GHz range. The antenna is based on integrating a Fresnel zone planar lens with a graded-index silicon interposer. The concept enables passive beamforming of four simultaneous beams from a single feeding port, covering a field of view from -30° to -14° for 20 GHz bandwidth with a 4° separation of the beam direction. The beams can be swept continuously over that field of view by mapping the signal to different frequencies. Furthermore, when using four feeds, 16 simultaneous beams can be created, of which two frequency-orthogonal beams are separated by 40 GHz in frequency can be mapped into the same spatial direction. Thus, it is demonstrated that high-gain multibeam beam steering can be achieved without the hardware complexity of conventional phased-array antenna systems requiring a large number of RF chains. An antenna prototype is implemented using silicon micromachining, resulting in a compact 15.8 mm × 15.8 mm device with a thickness of 526μm, which is directly mounted on a standard WM-380 waveguide feed. Measurement results include a realized gain of 32.1 dBi, only a 0.8 dB beam steering loss across the field of view, an effective side-lobe suppression better than -22 dB, and a high radiation efficiency of -1.25 dB. The measurements are in excellent agreement with simulations, and the worst-case deviation of the measured beam direction from the simulated one is only 0.1° out of 16 beams.
- Open Access
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (5) , 843-851
Investigating Sub-THz Computational Imaging Using Silicon Micromachined Frequency-Diverse Antennas
This paper investigates sub-THz computational imaging using compact, wideband, cavity-backed frequency-diverse antennas fabricated through silicon micromachining techniques. This paper presents a forward model based on pseudo-random frequency-diverse patterns using a Mills-Cross transmitter and receiver pair, which provides high-resolution imaging capabilities in the 220-330 GHz frequency range. The model is coupled with advanced compressed sensing algorithms, specifically Compressive Sampling Matching Pursuit (CoSaMP) and Fast Iterative Shrinkage-Thresholding Algorithm (FISTA), to enhance imaging performance under limited data acquisition. Through emulated simulation and experimental data, it is demonstrated that the system's ability to achieve range resolutions down to 1.4 mm and angular resolutions of $0.35^{\circ }$, even in the presence of noise, and analyze the trade-off between computational complexity and imaging accuracy. Sparsity investigations in spatial antenna population and frequency samples are comprehensively explored in this paper. The results show that using only 6.7% of the data, the CoSaMP algorithm can reconstruct a discernable image of the “KTH” logo. Results show that CoSaMP provides lower reconstruction error for sparse target distributions, while FISTA achieves superior noise resilience. The study highlights the practical implications of using frequency-diverse antennas in security screening and industrial inspection, where high-resolution imaging at sub-THz frequencies is demanded.
- 2 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (5) , 843-851
Open AccessInvestigating Sub-THz Computational Imaging Using Silicon Micromachined Frequency-Diverse Antennas
This paper investigates sub-THz computational imaging using compact, wideband, cavity-backed frequency-diverse antennas fabricated through silicon micromachining techniques. This paper presents a forward model based on pseudo-random frequency-diverse patterns using a Mills-Cross transmitter and receiver pair, which provides high-resolution imaging capabilities in the 220-330 GHz frequency range. The model is coupled with advanced compressed sensing algorithms, specifically Compressive Sampling Matching Pursuit (CoSaMP) and Fast Iterative Shrinkage-Thresholding Algorithm (FISTA), to enhance imaging performance under limited data acquisition. Through emulated simulation and experimental data, it is demonstrated that the system's ability to achieve range resolutions down to 1.4 mm and angular resolutions of $0.35^{\circ }$, even in the presence of noise, and analyze the trade-off between computational complexity and imaging accuracy. Sparsity investigations in spatial antenna population and frequency samples are comprehensively explored in this paper. The results show that using only 6.7% of the data, the CoSaMP algorithm can reconstruct a discernable image of the “KTH” logo. Results show that CoSaMP provides lower reconstruction error for sparse target distributions, while FISTA achieves superior noise resilience. The study highlights the practical implications of using frequency-diverse antennas in security screening and industrial inspection, where high-resolution imaging at sub-THz frequencies is demanded.
- Open Access
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 6205-6210
Graded Index Silicon Micromachined Lens Antenna: Enabling 36-dBi Gain and Circular Polarization at 500–750 GHz
This paper introduces a graded index Fresnel zone planar lens antenna operating with high gain in the 500-750 GHz frequency range. The main innovation involves achieving a gain of 35.9 dBi by incorporating a graded index dielectric perforated disc. This perforated disc acts as a distributed spatial delay for beam focusing, ensuring gain improvement and circular polarization simultaneously without needing an extra polarizer. The antenna exhibits high efficiency, with an average radiation efficiency of -1.05 dB, achieved through the optimization of a modified Fresnel zone planar lens for silicon-on-insulator (SOI) micromachining technology. The antenna maintains a return loss below -15 dB across the entire 500-750 GHz band, achieving a 40% fractional bandwidth, with circular polarization maintained and an axial ratio consistently below 2.8 dB. The fabricated chip, sized 12.18mm×12.18mm with a thickness of 526 μm, enhances practicality. The feeding arrangement involves a standard open waveguide, and direct mounting into a standard WM-380 waveguide flange is facilitated. The paper discusses the prototype’s design, fabrication, and measurement, emphasizing the excellent agreement between the antenna’s performance and simulated data.
- 12 May 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (8) , 6205-6210
Open AccessGraded Index Silicon Micromachined Lens Antenna: Enabling 36-dBi Gain and Circular Polarization at 500–750 GHz
This paper introduces a graded index Fresnel zone planar lens antenna operating with high gain in the 500-750 GHz frequency range. The main innovation involves achieving a gain of 35.9 dBi by incorporating a graded index dielectric perforated disc. This perforated disc acts as a distributed spatial delay for beam focusing, ensuring gain improvement and circular polarization simultaneously without needing an extra polarizer. The antenna exhibits high efficiency, with an average radiation efficiency of -1.05 dB, achieved through the optimization of a modified Fresnel zone planar lens for silicon-on-insulator (SOI) micromachining technology. The antenna maintains a return loss below -15 dB across the entire 500-750 GHz band, achieving a 40% fractional bandwidth, with circular polarization maintained and an axial ratio consistently below 2.8 dB. The fabricated chip, sized 12.18mm×12.18mm with a thickness of 526 μm, enhances practicality. The feeding arrangement involves a standard open waveguide, and direct mounting into a standard WM-380 waveguide flange is facilitated. The paper discusses the prototype’s design, fabrication, and measurement, emphasizing the excellent agreement between the antenna’s performance and simulated data.
- Open Access
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3310-3318
Inline Waveguide Filters With Transmission Zeros Using Frequency-Variant Couplings
This article introduces a novel frequency-variant coupling structure with high adjustability for waveguide filters. Although this structure is proposed for rectangular cavities, the same principle can be applied to other cavity geometries. The proposed structure is compatible with standard micromachining technologies. Using this coupling structure, two inline Nth-order waveguide filters with N-1 and N+1 transmission zeros (TZs) are developed. A fourth-order bandpass filter (BPF) with three TZs at 245, 285, and 288 GHz is designed, operating at a center frequency of 270 GHz with a 2% fractional bandwidth. In addition, a second-order BPF with a center frequency of 280 GHz and a 0.71% fractional bandwidth, utilizing three TZs at 230, 300, and 308 GHz, is also developed. Prototypes of both filters are fabricated using silicon micromachining. The measured insertion loss and return loss (RL) in the passband are 2 dB and better than 18 dB, respectively, for the fourth-order filter and 2.1 dB and better than 11 dB for the second-order filter, respectively.
- 20 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (6) , 3310-3318
Open AccessInline Waveguide Filters With Transmission Zeros Using Frequency-Variant Couplings
This article introduces a novel frequency-variant coupling structure with high adjustability for waveguide filters. Although this structure is proposed for rectangular cavities, the same principle can be applied to other cavity geometries. The proposed structure is compatible with standard micromachining technologies. Using this coupling structure, two inline Nth-order waveguide filters with N-1 and N+1 transmission zeros (TZs) are developed. A fourth-order bandpass filter (BPF) with three TZs at 245, 285, and 288 GHz is designed, operating at a center frequency of 270 GHz with a 2% fractional bandwidth. In addition, a second-order BPF with a center frequency of 280 GHz and a 0.71% fractional bandwidth, utilizing three TZs at 230, 300, and 308 GHz, is also developed. Prototypes of both filters are fabricated using silicon micromachining. The measured insertion loss and return loss (RL) in the passband are 2 dB and better than 18 dB, respectively, for the fourth-order filter and 2.1 dB and better than 11 dB for the second-order filter, respectively.
- Open Access
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 456-463
Silicon-Micromachined Wideband Sub-THz Frequency-Diverse Antenna
This paper presents the first compact, wideband, silicon-micromachined frequency-diverse antenna, operating across the 220-330 GHz range, designed explicitly for sub-THz imaging applications. The antenna consists of 80 slot radiating elements of twelve distinct sizes corresponding to half of the uniformly sampled wavelengths within the operating bandwidth. These elements are arranged in a Mills-Cross configuration for antenna designs A and B, supported by an innovatively shaped air-filled cavity. The cavity is engineered to support multiple higher-order, high-Q resonance modes, generating highly frequency-diverse, pseudo-random radiation patterns. The frequency-diverse antenna is fed by a three-section impedance-matching transitional direct waveguide and is fabricated using advanced silicon micromachining technology. This paper comprehensively analyzes the antenna's radiation patterns and impedance matching across the entire waveguide band. The compact prototype, with an overall size of 18 mm × 16 mm × 0.933 mm (effective antenna dimensions of 11 $\lambda \times 11\lambda \times 0.85\lambda$ ), is the most compact air-filled, cavity-backed frequency-diverse antenna reported to date. It demonstrates high radiation efficiency and is designed for direct mounting on a standard WR-3.4 waveguide flange. The antenna achieves a fractional bandwidth of 34%, with a return loss better than 10 dB, extending to 40% with a return loss better than 5 dB.
- 10 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 15 (3) , 456-463
Open AccessSilicon-Micromachined Wideband Sub-THz Frequency-Diverse Antenna
This paper presents the first compact, wideband, silicon-micromachined frequency-diverse antenna, operating across the 220-330 GHz range, designed explicitly for sub-THz imaging applications. The antenna consists of 80 slot radiating elements of twelve distinct sizes corresponding to half of the uniformly sampled wavelengths within the operating bandwidth. These elements are arranged in a Mills-Cross configuration for antenna designs A and B, supported by an innovatively shaped air-filled cavity. The cavity is engineered to support multiple higher-order, high-Q resonance modes, generating highly frequency-diverse, pseudo-random radiation patterns. The frequency-diverse antenna is fed by a three-section impedance-matching transitional direct waveguide and is fabricated using advanced silicon micromachining technology. This paper comprehensively analyzes the antenna's radiation patterns and impedance matching across the entire waveguide band. The compact prototype, with an overall size of 18 mm × 16 mm × 0.933 mm (effective antenna dimensions of 11 $\lambda \times 11\lambda \times 0.85\lambda$ ), is the most compact air-filled, cavity-backed frequency-diverse antenna reported to date. It demonstrates high radiation efficiency and is designed for direct mounting on a standard WR-3.4 waveguide flange. The antenna achieves a fractional bandwidth of 34%, with a return loss better than 10 dB, extending to 40% with a return loss better than 5 dB.
- Open Access
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (11) , 8375-8384
Investigating the Impact of Antenna Dispersion on Time Reversal Wideband THz Imaging Systems
This article investigates the impact of antenna dispersion on wideband Terahertz (THz) imaging systems. It is demonstrated that the effective bandwidth is reduced from the nominal system bandwidth, and thus, the expected image resolution cannot be reached when the antenna system has inappropriate frequency dispersion characteristics. Besides a theoretical analysis and simulations, experiments were conducted using antennas with different dispersion characteristics in an ultra-wideband 500–750 GHz imaging setup to assess the impact on achievable resolution. When utilizing low dispersion dielectric-lens antennas, the system successfully detected multiple targets with a radius of 0.6 mm even when positioned at close distance (2 mm in cross-range and 3 mm in range). In contrast to that, when using higher dispersion horn antennas, the resolution of a dual-target scenario was reduced to 3 mm in cross-range and 4 mm in range. Furthermore, it is shown that the target position reconstruction accuracy, as well as the signal-to-clutter ratio (SCR), are also improved by 68% and 2.7 dB, respectively, when using low dispersion antennas in the same setup. This investigation, for the first time, highlights the importance of considering antenna dispersion for accurate image reconstruction, particularly for high-resolution wideband THz imaging systems.
- 30 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (11) , 8375-8384
Open AccessInvestigating the Impact of Antenna Dispersion on Time Reversal Wideband THz Imaging Systems
This article investigates the impact of antenna dispersion on wideband Terahertz (THz) imaging systems. It is demonstrated that the effective bandwidth is reduced from the nominal system bandwidth, and thus, the expected image resolution cannot be reached when the antenna system has inappropriate frequency dispersion characteristics. Besides a theoretical analysis and simulations, experiments were conducted using antennas with different dispersion characteristics in an ultra-wideband 500–750 GHz imaging setup to assess the impact on achievable resolution. When utilizing low dispersion dielectric-lens antennas, the system successfully detected multiple targets with a radius of 0.6 mm even when positioned at close distance (2 mm in cross-range and 3 mm in range). In contrast to that, when using higher dispersion horn antennas, the resolution of a dual-target scenario was reduced to 3 mm in cross-range and 4 mm in range. Furthermore, it is shown that the target position reconstruction accuracy, as well as the signal-to-clutter ratio (SCR), are also improved by 68% and 2.7 dB, respectively, when using low dispersion antennas in the same setup. This investigation, for the first time, highlights the importance of considering antenna dispersion for accurate image reconstruction, particularly for high-resolution wideband THz imaging systems.
- Open Access
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (5) , 4077-4085
High-Gain Circularly Polarized 500–750 GHz Lens Antenna Enabled by Silicon Micromachining
This paper introduces an innovative silicon-micromachined, low-profile, high-gain antenna designed for wideband performance in the whole 500-750 GHz waveguide band. The novel antenna concept is based on an elliptical Fresnel Zone planner lens with optimized distribution of the zone dimensions. Furthermore, without requiring any extra phase compensating components, the design ensures circular polarization, which was measured to an axial ratio of better than 2.5 over the whole waveguide band (40% fractional bandwidth). The measured gain ranges from 24.3 to 25.7 dBi, and the return loss is better than 15 dB over the whole 250 GHz band. The 8.25mm×7.62mm large and only 526 μm thick antenna can be directly mounted onto a standard WM-380 waveguide flange. The measured radiation patterns for circular polarization, the gain, the axial ratio, and the return loss are excellently matching the simulated antenna performance. This work shows that all-dielectric antennas at THz frequencies easily outperform metal-based designs due to drastically reduced loss with only -0.85dB average radiation efficiency in the overall frequency band.
- 4 April 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (5) , 4077-4085
Open AccessHigh-Gain Circularly Polarized 500–750 GHz Lens Antenna Enabled by Silicon Micromachining
This paper introduces an innovative silicon-micromachined, low-profile, high-gain antenna designed for wideband performance in the whole 500-750 GHz waveguide band. The novel antenna concept is based on an elliptical Fresnel Zone planner lens with optimized distribution of the zone dimensions. Furthermore, without requiring any extra phase compensating components, the design ensures circular polarization, which was measured to an axial ratio of better than 2.5 over the whole waveguide band (40% fractional bandwidth). The measured gain ranges from 24.3 to 25.7 dBi, and the return loss is better than 15 dB over the whole 250 GHz band. The 8.25mm×7.62mm large and only 526 μm thick antenna can be directly mounted onto a standard WM-380 waveguide flange. The measured radiation patterns for circular polarization, the gain, the axial ratio, and the return loss are excellently matching the simulated antenna performance. This work shows that all-dielectric antennas at THz frequencies easily outperform metal-based designs due to drastically reduced loss with only -0.85dB average radiation efficiency in the overall frequency band.
- Open Access
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (6) , 3554-3563
Ultra-Narrowband Silicon-Micromachined Sub-THz Filter With Wide Spurious-Free Rejection Band Employing High-Q TM330 Resonators
In this article, we present an ultra-narrowband silicon-micromachined bandpass filter with a wide and high-rejection stopband. The proposed filter uses high- $Q$ factor $\text{TM}_{330}$ mode resonators. To avoid near-passband spurious resonances typically associated with higher order modes, a novel method of arranging the positions of the coupling slots is carried out. A fourth-order filter with a center frequency of 183 GHz and a fractional bandwidth (FBW) of 0.5% has been fabricated by silicon micromachining for the first time. The prototype employs out-of-plane transitions on the input and output ports, which results in axial ports enabling a direct characterization with the device simply mounted between the two standard waveguide test ports. The unloaded $Q$ factor extracted from the measurements is 1000, which is unparalleled by any previously reported narrowband filter in any technology in this frequency range. A spurious free response with a high stopband rejection in the entire waveguide band is obtained. The measured worst-case insertion loss and return loss (RL) in the passband are 4.5 and 9 dB, respectively.
- 31 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 72 (6) , 3554-3563
Open AccessUltra-Narrowband Silicon-Micromachined Sub-THz Filter With Wide Spurious-Free Rejection Band Employing High-Q TM330 Resonators
In this article, we present an ultra-narrowband silicon-micromachined bandpass filter with a wide and high-rejection stopband. The proposed filter uses high- $Q$ factor $\text{TM}_{330}$ mode resonators. To avoid near-passband spurious resonances typically associated with higher order modes, a novel method of arranging the positions of the coupling slots is carried out. A fourth-order filter with a center frequency of 183 GHz and a fractional bandwidth (FBW) of 0.5% has been fabricated by silicon micromachining for the first time. The prototype employs out-of-plane transitions on the input and output ports, which results in axial ports enabling a direct characterization with the device simply mounted between the two standard waveguide test ports. The unloaded $Q$ factor extracted from the measurements is 1000, which is unparalleled by any previously reported narrowband filter in any technology in this frequency range. A spurious free response with a high stopband rejection in the entire waveguide band is obtained. The measured worst-case insertion loss and return loss (RL) in the passband are 4.5 and 9 dB, respectively.
- 25 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (1) , 130-133
Full-Band Silicon-Micromachined E-Plane Waveguide Bend for Flange-to-Chip Connection
This paper presents a novel design of a full-band E-plane waveguide bend for direct flange-to-chip connection. The proposed E-plane bend concept is validated with a reduced-height bend prototype designed for standard WR-3.4 waveguide flange-to-chip connection, fabricated by silicon micromachining, and characterized by de-embedding the S-parameters with a custom-made offset-short calibration kit. The measured insertion and return losses are 0.08-0.3 dB and better than 14.7 dB, respectively, for the whole waveguide band of 220-320 GHz, and better than 0.15 dB and 20 dB, respectively, for more than 80% of the waveguide band. The measured results are in excellent agreement with the simulation data. Besides, a two-port waveguide structure with WR-3.4 interfaces is fabricated and measured to confirm the functionality of the designed E-plane bend. Furthermore, sensitivity analysis shows the robustness of the proposed geometry against fabrication tolerances.
- 25 October 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (1) , 130-133
Full-Band Silicon-Micromachined E-Plane Waveguide Bend for Flange-to-Chip Connection
This paper presents a novel design of a full-band E-plane waveguide bend for direct flange-to-chip connection. The proposed E-plane bend concept is validated with a reduced-height bend prototype designed for standard WR-3.4 waveguide flange-to-chip connection, fabricated by silicon micromachining, and characterized by de-embedding the S-parameters with a custom-made offset-short calibration kit. The measured insertion and return losses are 0.08-0.3 dB and better than 14.7 dB, respectively, for the whole waveguide band of 220-320 GHz, and better than 0.15 dB and 20 dB, respectively, for more than 80% of the waveguide band. The measured results are in excellent agreement with the simulation data. Besides, a two-port waveguide structure with WR-3.4 interfaces is fabricated and measured to confirm the functionality of the designed E-plane bend. Furthermore, sensitivity analysis shows the robustness of the proposed geometry against fabrication tolerances.
- Open Access
- 16 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (9) , 3929-3936
On-Chip Integration of Orthogonal Subsystems Enabled by Broadband Twist at 220–325 GHz
In this article, we report for the first time on a low-loss compact platform that enables the integration of H-and E-plane rectangular waveguide subsystems enabled by 90 $^{\circ}$ polarization rotation of rectangular waveguide sections on a silicon-micromachined chip. The proposed platform offers unprecedented design flexibility for a 2.5D fabrication technology such as silicon micromachining, since orthogonal waveguide device sections with full design freedom in H-plane geometries can be cofabricated with sections with full design freedom in E-plane geometries, enabled by novel, integrated waveguide twists optimized for 2.5D fabrication. The platform is developed for use in broadband millimeter-and submillimeter-wave waveguide circuits and prototypes are implemented in the 220–325-GHz band. A prototype chip demonstrating the platform, implemented by bonding three stacked silicon chips, is fabricated. The measured results of the twist prototype exhibit a very low insertion loss of less than 0.2 dB and a return loss of 20 dB or better in most of the 220–325-GHz band. An integrated eighth-degree lowpass waveguide filter with axial ports having a cut-off frequency of 280 GHz is codesigned with the twist transition and fabricated on the platform to demonstrate its application. The filter shows 0.4-dB measured insertion loss and has a measured return loss in the passband of better than 14 dB.
- 16 March 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 71 (9) , 3929-3936
Open AccessOn-Chip Integration of Orthogonal Subsystems Enabled by Broadband Twist at 220–325 GHz
In this article, we report for the first time on a low-loss compact platform that enables the integration of H-and E-plane rectangular waveguide subsystems enabled by 90 $^{\circ}$ polarization rotation of rectangular waveguide sections on a silicon-micromachined chip. The proposed platform offers unprecedented design flexibility for a 2.5D fabrication technology such as silicon micromachining, since orthogonal waveguide device sections with full design freedom in H-plane geometries can be cofabricated with sections with full design freedom in E-plane geometries, enabled by novel, integrated waveguide twists optimized for 2.5D fabrication. The platform is developed for use in broadband millimeter-and submillimeter-wave waveguide circuits and prototypes are implemented in the 220–325-GHz band. A prototype chip demonstrating the platform, implemented by bonding three stacked silicon chips, is fabricated. The measured results of the twist prototype exhibit a very low insertion loss of less than 0.2 dB and a return loss of 20 dB or better in most of the 220–325-GHz band. An integrated eighth-degree lowpass waveguide filter with axial ports having a cut-off frequency of 280 GHz is codesigned with the twist transition and fabricated on the platform to demonstrate its application. The filter shows 0.4-dB measured insertion loss and has a measured return loss in the passband of better than 14 dB.