Adam Kasiński

In this study, non-toxic, biodegradable, and pH-sensitive polyurethane hydrogels (PUs) were prepared by using hexamethylene diisocyanate (HDI), copolymers of є-caprolactone (CL), rac-lactide (LA), and poly(ethylene glycol) (PEG), poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) (PEO-bPPO-b-PEO), 1,4-butanediol (BD), and L-glutamine (Gln). The CL, LA, and PEG copolymers were obtained in the presence of a new synthesized catalytic system: diethylzinc/ethyl-3,4-dihydroxybenzoate. Obtained PUs were screened for their cytotoxicity, evaluated for their swelling behavior and hydrolytic degradation, and employed as hydrogel pH-responsive anti-cancer drug delivery systems (DDSs). The novel and promising hydrogel DDSs, capable of releasing 5-fluorouracyl (5-FU) and fluorodeoxyuridine (5-fluoro-2′-deoxyuridine, FUdR) in a sustained and controlled manner, were prepared and were nontoxic. Most prepared hydrogel DDSs were found to release anti-cancer drugs with first-order or zero-order kinetics. The drug release mechanism was generally denoted as Fickian or non-Fickian transport. The possibility of controlling the kinetics of drug release by changing the pH of the environment was also observed. The findings indicate that these PU hydrogels are suitable for use as intelligent DDSs for the targeted delivery of 5-FU or FUdR. We expect that the hydrogel DDSs developed will be utilized in the treatment of pancreatic cancer.

Carmustine (BCNU) is a powerful alkylating agent primarily used in the chemotherapeutic treatment of malignant brain tumors. However, its clinical application faces significant constraints due to its lipophilicity, low thermal stability, and rapid degradation in physiological environments. To tackle these challenges, our research aimed at the development and detailed characterization of α-cyclodextrin (α-CD) inclusion complexes (ICs) with BCNU employing three different synthesis techniques: co-grinding, cryomilling, and co-precipitation. The selected synthetic methods displayed variations dependent on the technique used, affecting the efficiency, inclusion ratios, and drug-loading capacities, with co-precipitation achieving the most favorable complexation parameters. Structural elucidation through ¹H NMR chemical shifts analysis indicated that only partial inclusion of BCNU occurred within α-CD in ICs produced via co-grinding, while cryomilling and co-precipitation allowed for complete inclusion. Multimodal spectroscopic analyses (FT-IR, UV-Vis, ¹³C CP MAS NMR, and ESI-MS) further substantiated the effective encapsulation of BCNU within α-CD, and systematic solubility assessments via Job’s continuous variation and the Benesi-Hildebrand method revealed a 1:1 host-guest stoichiometry. The ICs obtained were evaluated for BCNU release in vitro at pH levels of 4, 5, 6.5, and 7.4. The mechanism of BCNU drug release was determined to be Fickian diffusion, with the highest cumulative release noted in the acidic microenvironment. These findings collectively validate the effectiveness of α-CD as a functional excipient for the modulation of BCNU’s physicochemical properties through non-covalent complexation. This strategy shows potential for increasing the stability and solubility of BCNU, which may enhance its therapeutic effectiveness in the treatment of brain tumors.

Biodegradable polyesters serve as matrices in pharmaceutical applications for the controlled release of therapeutic agents. These polymers are essential in the advancement of drug delivery systems (DDSs) that facilitate the gradual drug release over a predetermined duration. Therefore, this study introduces the novel use of a diethyl zinc/propyl gallate catalytic system to synthesize glycolide/ε-caprolactone copolymers (PGCL) for subsequent biomedical applications. A total of twenty-four biodegradable copolymeric matrices, characterized by a highly random microstructure and an average molecular weight (M_n) ranging from approximately 27 to 62 kDa, were synthesized and analyzed. The resulting copolymer samples underwent Neutral Red Uptake (NRU) and Umu tests, revealing no signs of cyto- or genotoxicity. Furthermore, a hemolysis assay was conducted on selected samples, indicating their suitability for intravenous administration. Finally, a release study of paclitaxel (PACL) from one of the synthesized matrices demonstrated a sustained and highly controlled drug release profile, following first-order kinetics and the Fickian diffusion mechanism.

Background/Objectives: Camptothecin (CPT) is a well-known chemical compound recognized for its significant anticancer properties. However, its clinical application remains limited due to challenges related to CPT’s high hydrophobicity and the instability of its active form. To address these difficulties, our research focused on the development of four novel nanoparticulate systems intended for either oral or intravenous administration. Methods: These nanosystems were based on a poly(amidoamine) (PAMAM) dendrimer/CPT complex, which had been coated with biodegradable homo- and copolymers, designed with appropriate physicochemical properties and chain microstructures. Results: The resulting nanomaterials, with diameters ranging from 110 to 406 nm and dispersity values between 0.10 and 0.67, exhibited a positive surface charge and were synthesized using biodegradable poly(L-lactide) (PLLA), poly(L-lactide-co-ε-caprolactone) (PLACL), and poly(glycolide-co-ε-caprolactone) (PGACL). Biological assessments, including cell viability and hemolysis tests, indicated that all polymers demonstrated less than 5% hemolysis, confirming their hemocompatibility for potential intravenous use. Furthermore, fibroblasts exposed to these matrices showed concentration-dependent viability. The entrapment efficiency (EE) of CPT reached up to 27%, with drug loading (DL) values as high as 17%. The in vitro drug release studies lasted over 400 h with the use of phosphate buffer solutions at two different pH levels, demonstrating that time-dependent processes allowed for a gradual and controlled release of CPT from the developed nanosystems. The release kinetics of the active compound at pH 7.4 ± 0.05 and 6.5 ± 0.05 followed near-first-order or first-order models, with diffusion and Fickian/non-Fickian transport mechanisms. Importantly, the nanoparticulate systems enabled the stabilization of the pharmacologically active form of CPT, while providing protection against hydrolysis, even in physiological environments. Conclusions: In our opinion, these results underscore the promising future of biodegradable nanosystems as effective drug delivery systems (DDSs) for targeted cancer treatment, offering stability and efficacy over short, medium, and long-term applications.

Background/Objectives: Camptothecin (CPT) is a well-known chemical compound recognized for its significant anticancer properties. However, its clinical application remains limited due to challenges related to CPT’s high hydrophobicity and the instability of its active form. To address these difficulties, our research focused on the development of four novel nanoparticulate systems intended for either oral or intravenous administration; Methods: These nanosystems were based on a poly(amidoamine) (PAMAM) dendrimer/CPT complex, which had been coated with biodegradable homo- and copolymers, designed with appropriate physicochemical properties and chain microstructures; Results: The resulting nanomaterials, with diameters ranging from 110 to 406 nm and dispersity values between 0.10 and 0.67, exhibited a positive surface charge and were synthesized using biodegradable poly(L-lactide) (PLLA), poly(L-lactide-co-ε-caprolactone) (PLACL), and poly(glycolide-co-ε-caprolactone) (PGACL). Biological assessments, including cell viability and hemolysis tests, indicated that all polymers demonstrated less than 5% hemolysis, confirming their hemocompatibility for potential intravenous use. Furthermore, fibroblasts exposed to these matrices showed concentration-dependent viability. The entrapment efficiency (EE) of CPT reached up to 27%, with drug loading (DL) values as high as 17%. The in vitro drug release studies lasted over 400 h with the use of phosphate buffer solutions at two different pH levels, demonstrating that time-dependent processes allowed for a gradual and controlled release of CPT from the developed nanosystems. The release kinetics of the active compound at pH 7.4 ± 0.05 and 6.5 ± 0.05 followed near-first-order or first-order models, with diffusion and Fickian/non-Fickian transport mechanisms. Importantly, the nanoparticulate systems enabled the stabilization of the pharmacologically active form of CPT, while providing protection against hydrolysis, even in physiological environments; Conclusions: In our opinion, these results underscore the promising future of biodegradable nanosystems as effective drug delivery systems (DDSs) for targeted cancer treatment, offering stability and efficacy over short, medium, and long-term applications.

The aim of this study was to develop an innovative, dual-stimuli-responsive smart hydrogel local drug delivery system (LDDS), potentially useful as an injectable simultaneous chemotherapy and magnetic hyperthermia (MHT) antitumor treatment device. The hydrogels were based on a biocompatible and biodegradable poly(ε-caprolactone-co-rac-lactide)-b-poly(ethylene glycol)-b-poly(ε-caprolactone-co-rac-lactide) (PCLA-PEG-PCLA, PCLA) triblock copolymer, synthesized via ring-opening polymerization (ROP) in the presence of a zirconium(IV) acetylacetonate (Zr(acac)₄) catalyst. The PCLA copolymers were successfully synthesized and characterized using NMR and GPC techniques. Furthermore, the gel-forming and rheological properties of the resulting hydrogels were thoroughly investigated, and the optimal synthesis conditions were determined. The coprecipitation method was applied to create magnetic iron oxide nanoparticles (MIONs) with a low diameter and a narrow size distribution. The magnetic properties of the MIONs were close to superparamagnetic upon TEM, DLS, and VSM analysis. The particle suspension placed in an alternating magnetic field (AMF) of the appropriate parameters showed a rapid increase in temperature to the values desired for hyperthermia. The MIONs/hydrogel matrices were evaluated for paclitaxel (PTX) release in vitro. The release was prolonged and well controlled, displaying close to zero-order kinetics; the drug release mechanism was found to be anomalous. Furthermore, it was found that the simulated hyperthermia conditions had no effect on the release kinetics. As a result, the synthesized smart hydrogels were discovered to be a promising antitumor LDDS, allowing simultaneous chemotherapy and hyperthermia treatment.

In this paper, injectable, thermosensitive smart hydrogel local drug delivery systems (LDDSs) releasing the model antitumour drug 5-fluorouracil (5-FU) were developed. The systems were based on biodegradable triblock copolymers synthesized via ring opening polymerization (ROP) of ε-caprolactone (CL) in the presence of poly(ethylene glycol) (PEG) and zirconium(IV) acetylacetonate (Zr(acac)₄), as co-initiator and catalyst, respectively. The structure, molecular weight (M_n) and molecular weight distribution (Đ) of the synthesized materials was studied in detail using nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques; the optimal synthesis conditions were determined. The structure corresponded well to the theoretical assumptions. The produced hydrogels demonstrated a sharp sol–gel transition at temperature close to physiological value, forming a stable gel with good mechanical properties at 37 °C. The kinetics and mechanism of in vitro 5-FU release were characterized by zero order, first order, Higuchi and Korsmeyer–Peppas mathematical models. The obtained results indicate good release control; the kinetics were generally defined as first order according to the predominant diffusion mechanism; and the total drug release time was approximately 12 h. The copolymers were considered to be biodegradable and non-toxic; the resulting hydrogels appear to be promising as short-term LDDSs, potentially useful in antitumor therapy.

A novel and promising hydrogel drug delivery system (DDS) capable of releasing 5‑fluorouracil (5-FU) in a prolonged and controlled manner was obtained using ε‑caprolactone‑poly(ethylene glycol) (CL-PEG) or rac‑lactide-poly(ethylene glycol) (rac‑LA-PEG) copolymers. Copolymers were synthesized via the ring-opening polymerization (ROP) process of cyclic monomers, ε‑caprolactone (CL) or rac-lactide (rac-LA), in the presence of zirconium(IV) octoate (Zr(Oct)₄) and poly(ethylene glycol) 200 (PEG 200) as catalyst and initiator, respectively. Obtained triblock copolymers were characterized by nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques; the structure and tacticity of the macromolecules were determined. The relationship between the copolymer structure and the reaction conditions was evaluated. The optimal conditions were specified as 140 °C and 24 h. In the next step, CL-PEG and rac-LA-PEG copolymers were chemically crosslinked using hexamethylene diisocyanate (HDI). Selected hydrogels were subjected to in vitro antitumor drug release studies, and the release data were analyzed using zero-order, first-order, and Korsmeyer-Peppas mathematical models. Controlled and prolonged (up to 432 h) 5-FU release profiles were observed for all examined hydrogels with first-order or zero-order kinetics. The drug release mechanism was generally denoted as non-Fickian transport.

Among modern drug formulations, stimuli-responsive hydrogels also called “smart hydrogels” deserve a special attention. The basic feature of this system is the ability to change their mechanical properties, swelling ability, hydrophilicity, bioactive molecules permeability, etc., influenced by various stimuli, such as temperature, pH, electromagnetic radiation, magnetic field and biological factors. Therefore, stimuli-responsive matrices can be potentially used in tissue engineering, cell cultures and technology of innovative drug delivery systems (DDSs), releasing the active substances under the control of internal or external stimuli. Moreover, smart hydrogels can be used as injectable DDSs, due to gel–sol transition connected with in situ cross-linking process. Innovative smart hydrogel DDSs can be utilized as matrices for targeted therapy, which enhances the effectiveness of tumor chemotherapy and subsequently limits systemic toxicity. External stimulus sensitivity allows remote control over the drug release profile and gel formation. On the other hand, internal factors provide drg accumulation in tumor tissue and reduce the concentration of active drug form in healthy tissue. In this report, we summarise the basic knowledge and chemical strategies for the synthetic smart hydrogel DDSs applied in antitumor therapy.