CTCharles R. Trepte

Charles R. Trepte

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Charles R. Trepte has a total of 172 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Polarization calibration of spaceborne lidar using dense cirrus–scattered solar background with molecular scattering correction

    by Zhaoyan Liu, Mark A. Vaughan, Pengwang Zhai, Anne Emilie Garnier, Shan Zeng, Sharon D. Rodier, Yongxiang Hu, Ali H. Omar, Charles R. Trepte

    Accurate calibration is essential for spaceborne polarization-sensitive lidars, as biases in depolarization ratio measurements can significantly affect the retrieval of cloud and aerosol properties. A polarization calibration technique based on solar background signals scattered by optically thick ice clouds (OTIC) provides a semi-continuous daytime calibration capability that complements onboard pseudo-depolarizer (PD) methods. This method was successfully applied to data from the Cloud-Aerosol Transport System (CATS) lidar at 1064 nm, where molecular scattering effects are negligible. However, at shorter wavelengths, molecular scattering of sunlight between the lidar and the OTIC layer polarizes the background signal and introduces systematic biases. We present a molecular scattering correction (MSC) scheme based on vector radiative transfer modeling (VRTM) to account for this effect and demonstrate its performance using observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The results show that molecular scattering introduces a daytime bias of approximately 1 % at 532 nm, which is effectively removed by the VRTM-based MSC, yielding close agreement with onboard PD calibrations. For the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) Atmospheric Lidar (ATLID) operating at 355 nm, model calculations indicate that molecular scattering contributions can be more than five times larger than at 532 nm, underscoring the necessity of applying an MSC when the OTIC calibration technique is employed. Together, these results establish the OTIC calibration technique, combined with MSC, as a robust approach for achieving accurate polarization calibration across current and future spaceborne lidar missions.

  • Open Access

    Vertical profiles of aerosol chemical species concentration retrieved through synergy of spaceborne lidar and polarimeter observations

    by Abou Bakr Merdji, Juan Cuesta, Fazzal Qayyum, Anton Lopatin, Oleg Dubovik, Durgesh Nandan Piyush, Laaziz El Amraoui, Paolo Di Girolamo, Charles R. Trepte

    We present a novel methodology, AEROCHEMPro/GRASP (AEROsol CHEMical PROfiling), for retrieving vertical concentration profiles of aerosol chemical species by synergistically combining co-located measurements from a multiwavelength lidar and a multi-angular polarimeter. AEROCHEMPro represents the first retrieval framework for remote sensing of the vertically-resolved aerosol chemical composition. It is based on an improved version of the GRASP (Generalized Retrieval of Aerosol and Surface Properties) chemical component framework. The methodology is developed within the context of the Atmosphere Observing System (AOS) international initiative, which proposes a spaceborne observing system to advance our knowledge of aerosols, clouds, convection, and precipitation. Moreover, the retrieval strategy remains broadly applicable to future satellite missions and observing systems involving combined lidar and multi-angular polarimeter aerosol remote sensing. Based on a statistically optimized and physically-constrained inversion, AEROCHEMPro/GRASP delivers three distinct aerosol vertical profiles: (i) a fine mode composed of black carbon, brown carbon, inorganic salts, and associated water uptake; (ii) a hydrophobic coarse mode representing mineral dust, decomposed into iron oxide and quartz species; and (iii) a hydrophilic coarse mode consisting of sea salt particles and their associated water content. The approach explicitly retrieves these three aerosol profiles, along with the fractional abundance of each of the six mentioned aerosol chemical species and their water content. This retrieval of aerosol chemical composition vertical profiles offers, for the first time, a direct observational link between aerosol optical measurements and their speciation resolved in altitude. We demonstrate the feasibility and performance of this technique through an innovative retrieval experiment, where synthetic lidar and polarimeter observations are generated using the MOCAGE chemical transport model and a comprehensive radiative transfer simulator (GRASP forward model). These pseudo-observations include multi-wavelength attenuated backscatter and depolarization ratios, along with polarized radiances across multiple viewing angles and spectral bands. Results from global-scale transects spanning marine, urban, dust, and complex mixture-dominated regions show that the retrieval captures with good fidelity the main features of vertical aerosol composition and their bulk optical properties. Fine-mode species are well retrieved, particularly in the boundary layer, even for atmospheres with complex mixtures of multiple aerosol species. Dust is accurately retrieved and well defined in terms of vertical extent, load, and composition, and sea salt concentrations are very well reproduced. Some limitations for deriving water content in the upper atmospheric layers are remarked. AEROCHEMPro/GRASP reliably derives optical properties such as aerosol optical depth (AOD), single scattering albedo (SSA), and lidar ratio (LR), demonstrating the approach's robustness. As this initial validation relies on a self-consistent simulation framework over a spatially uniform surface baseline, these results represent an optimistic, idealized theoretical performance limit. This new retrieval approach represents a significant advancement in spaceborne aerosol remote sensing, as it provides vertically resolved chemical speciation that is directly related to chemical transport model results. It offers new opportunities to improve our understanding of aerosol processes and their effects on climate and air quality.


  • Open Access

    Reply on RC2

    by Zhaoyan Liu, Mark A. Vaughan, Pengwang Zhai, Anne Emilie Garnier, Shan Zeng, Sharon D. Rodier, Yongxiang Hu, Ali H. Omar, Charles R. Trepte

    Accurate calibration is essential for spaceborne polarization-sensitive lidars, as biases in depolarization ratio measurements can significantly affect the retrieval of cloud and aerosol properties. A polarization calibration technique based on solar background signals scattered by optically thick ice clouds (OTIC) provides a semi-continuous daytime calibration capability that complements onboard pseudo-depolarizer (PD) methods. This method was successfully applied to data from the Cloud-Aerosol Transport System (CATS) lidar at 1064 nm, where molecular scattering effects are negligible. However, at shorter wavelengths, molecular scattering of sunlight between the lidar and the OTIC layer polarizes the background signal and introduces systematic biases. We present a molecular scattering correction (MSC) scheme based on vector radiative transfer modeling (VRTM) to account for this effect and demonstrate its performance using observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The results show that molecular scattering introduces a daytime bias of approximately 1 % at 532 nm, which is effectively removed by the VRTM-based MSC, yielding close agreement with onboard PD calibrations. For the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) Atmospheric Lidar (ATLID) operating at 355 nm, model calculations indicate that molecular scattering contributions can be more than five times larger than at 532 nm, underscoring the necessity of applying an MSC when the OTIC calibration technique is employed. Together, these results establish the OTIC calibration technique, combined with MSC, as a robust approach for achieving accurate polarization calibration across current and future spaceborne lidar missions.

  • Open Access

    Comment on egusphere-2026-1876

    by Zhaoyan Liu, Mark A. Vaughan, Pengwang Zhai, Anne Emilie Garnier, Shan Zeng, Sharon D. Rodier, Yongxiang Hu, Ali H. Omar, Charles R. Trepte

    Accurate calibration is essential for spaceborne polarization-sensitive lidars, as biases in depolarization ratio measurements can significantly affect the retrieval of cloud and aerosol properties. A polarization calibration technique based on solar background signals scattered by optically thick ice clouds (OTIC) provides a semi-continuous daytime calibration capability that complements onboard pseudo-depolarizer (PD) methods. This method was successfully applied to data from the Cloud-Aerosol Transport System (CATS) lidar at 1064 nm, where molecular scattering effects are negligible. However, at shorter wavelengths, molecular scattering of sunlight between the lidar and the OTIC layer polarizes the background signal and introduces systematic biases. We present a molecular scattering correction (MSC) scheme based on vector radiative transfer modeling (VRTM) to account for this effect and demonstrate its performance using observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The results show that molecular scattering introduces a daytime bias of approximately 1 % at 532 nm, which is effectively removed by the VRTM-based MSC, yielding close agreement with onboard PD calibrations. For the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) Atmospheric Lidar (ATLID) operating at 355 nm, model calculations indicate that molecular scattering contributions can be more than five times larger than at 532 nm, underscoring the necessity of applying an MSC when the OTIC calibration technique is employed. Together, these results establish the OTIC calibration technique, combined with MSC, as a robust approach for achieving accurate polarization calibration across current and future spaceborne lidar missions.

  • Open Access

    Polarization Calibration of Spaceborne Lidar Using Dense Cirrus–Scattered Solar Background with Molecular Scattering Correction

    by Zhaoyan Liu, Mark A. Vaughan, Pengwang Zhai, Anne Emilie Garnier, Shan Zeng, Sharon D. Rodier, Yongxiang Hu, Ali H. Omar, Charles R. Trepte

    Accurate calibration is essential for spaceborne polarization-sensitive lidars, as biases in depolarization ratio measurements can significantly affect the retrieval of cloud and aerosol properties. A polarization calibration technique based on solar background signals scattered by optically thick ice clouds (OTIC) provides a semi-continuous daytime calibration capability that complements onboard pseudo-depolarizer (PD) methods. This method was successfully applied to data from the Cloud-Aerosol Transport System (CATS) lidar at 1064 nm, where molecular scattering effects are negligible. However, at shorter wavelengths, molecular scattering of sunlight between the lidar and the OTIC layer polarizes the background signal and introduces systematic biases. We present a molecular scattering correction (MSC) scheme based on vector radiative transfer modeling (VRTM) to account for this effect and demonstrate its performance using observations from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The results show that molecular scattering introduces a daytime bias of approximately 1 % at 532 nm, which is effectively removed by the VRTM-based MSC, yielding close agreement with onboard PD calibrations. For the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) Atmospheric Lidar (ATLID) operating at 355 nm, model calculations indicate that molecular scattering contributions can be more than five times larger than at 532 nm, underscoring the necessity of applying an MSC when the OTIC calibration technique is employed. Together, these results establish the OTIC calibration technique, combined with MSC, as a robust approach for achieving accurate polarization calibration across current and future spaceborne lidar missions.

  • Open Access

    CALIPSO 1064 nm calibration biases inferred from wavelength-dependent signal attenuation by stratospheric aerosols

    by Jayanta Kar, Mark A. Vaughan, Robert P. Damadeo, Mahesh Kovilakam, Jason L. Tackett, Charles R. Trepte

    Calibration of lidar signals at 1064 nm from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite depends on the prior calibration of the primary 532 nm channel. However, the 1064 nm calibration procedure also requires knowledge of the ratio of stratospheric signal attenuations at 1064 and 532 nm, which is not available a priori and thus is assumed to be 1. This assumption introduces a potential bias in the computed 1064 nm calibration coefficients. In this work we assess this bias by using independent multi-channel occultation retrievals of stratospheric aerosol extinction from the Stratospheric Aerosol and Gas Experiment (SAGE III) on the International Space Station (ISS) for the period 2017 onwards. We also use the GLObal Space based Stratospheric Aerosol Climatology (GloSSAC) to provide a historical background during the SAGE II era (1984 through 2005). The results show that the magnitude of the CALIOP 1064 nm calibration bias is less than 1 %–2 % within the tropics under stratospheric background conditions. However, recent biases can be as high as 5 % when volcanic perturbations and/or pyro-cumulonimbus (pyroCb) injections dominate the stratospheric aerosol loading. We explore the effects of this bias on CALIOP's level 2 science retrievals by estimating the anticipated perturbations in cloud-aerosol discrimination (CAD) performance and by quantifying the non-linear propagation of errors in CALIOP's 1064 nm extinction coefficients. This global characterization of the spectral attenuation differences should provide useful information for future spaceborne elastic lidars operating at 1064 nm.


  • Open Access

    PISTON and CAMP 2 Ex observations of the fundamental modes of aerosol vertical variability in the Northwest Tropical Pacific and Maritime Continent's Monsoon

    by Jeffrey S. Reid, Robert E. Holz, Chris A. Hostetler, Richard A. Ferrare, Juli I. Rubin, Elizabeth J. Thompson, Susan C. van Den Heever, Corey G. Amiot, Sharon P. Burton, Joshua P. DiGangi, et al.

    While most large-scale smoke advection occurs within the free troposphere, Maritime Continent smoke is suspected to be unique in its long-range, near-surface transport. Such a pathway likely creates strong gradients and uncertainties in interpreting satellite and model data on light extinction, air pollution, and cloud condensation nuclei. This paper documents High Spectral Resolution Lidar (HSRL) data from the 2019 ONR PISTON cruise and NASA CAMP2Ex flights that revealed Maritime Continent smoke and pollution transport pathways and heterogeneity around the Marine Atmospheric Boundary Layer (MABL) over thousands of kilometers. Observations showed that 95 % of integrated aerosol backscatter occurred below 2500 m altitude. The R/V Sally Ride observed 50th and 84th percentile aerosol backscatter altitudes at ∼600 and ∼1500 m respectively, regardless of aerosol loading. Peak backscatter values occurred within or near the MABL top, diminishing as we approached 2–3 km altitude, but with occasional plumes reaching the melting level at 4800 m. At monsoonal scales, aerosol models largely account for the observed directional wind shear that causes altitude-dependent particle transport: near-surface particles remain in the core monsoon flow around the MABL, while at lower latitudes, aerosol layers aloft advect more eastwardly. Around the MABL, however, significant cloud-scale variability exists due to fine-scale flow, halo-entrainment-detrainment, and cold pool phenomena. Backscatter enhancements beneath individual clouds, extending to the ocean surface, likely relate to MABL-free troposphere exchange and air-sea interaction. So while aerosol transport occurs near the surface, particle extinction heterogeneity must still be considered for in situ observations and satellite retrievals.


  • Open Access

    Mapping 532 nm lidar ratios for CALIPSO-classified marine aerosols using MODIS AOD constrained retrievals and GOCART model simulations

    by Travis D. Toth, Marian B. Clayton, Zhujun Li, David Painemal, Sharon D. Rodier, Jayanta Kar, Tyler J. Thorsen, Richard A. Ferrare, Mark A. Vaughan, Jason L. Tackett, et al.

    The NASA-CNES Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) mission provided a spaceborne global record of atmospheric aerosol and cloud profiles from June 2006 to June 2023. As an elastic backscatter lidar, the CALIPSO Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) typically required an assumption of the aerosol lidar ratio (extinction-to-backscatter ratio; Sa) to retrieve aerosol extinction and column-integrated aerosol optical depth (AOD). In all previous versions of its data products, the CALIPSO extinction algorithms first determine the aerosol types then assign one Sa value globally for each aerosol type (e.g., 23 sr for marine at 532 nm). One of the major changes for the final CALIPSO data products release (Version 5, or V5) is the implementation of regional and seasonal Sa tables for CALIOP-classified “marine” aerosols. In this study, we describe the process of creating the tables using 12 years (June 2006–August 2018) of Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) total column AODs to constrain collocated CALIOP backscatter profiles in a Fernald inversion scheme and infer Sa (at 532 nm), focusing solely on the CALIOP “marine” aerosol type. The Goddard Chemistry Aerosol Radiation and Transport (GOCART) global aerosol model is used to estimate sea salt volume fraction (SSVF) that are collocated with the constrained Sa retrievals. Patterns of smaller SSVF (< 65 %) and larger constrained Sa (> 40 sr) are found near land masses, while larger SSVF (> 95 %) and smaller constrained Sa (< 30 sr) are generally observed in the remote oceans. The inverse empirical relationship found between modeled SSVF and constrained Sa over global oceans yields values of ∼ 21 sr for SSVF of 100 % (i.e., “pure” marine) and ∼ 58 sr for SSVF of 0 % (i.e., the absence of marine aerosol). This relationship is applied to develop regional and seasonal hybrid (retrieval and model-assisted) climatological Sa maps for CALIOP-classified marine aerosols; i.e., when MODIS-constrained results are not available, the model-assisted values are used. These hybrid Sa maps are subsequently used to retrieve new CALIPSO Level 2 (L2) aerosol extinction profiles and column AODs in the V5 release. For a 4-month (January, April, July, and October 2015) analysis, the V5 L2 CALIPSO AODs compared better to CALIPSO Ocean Derived Column Optical Depth (ODCOD) than the CALIPSO Version 4.51 (V4.51) standard AODs in several regions, most notably the Bay of Bengal/Arabian Sea, where smoke/pollution typically mixes with marine aerosols. Also, the V5 CALIPSO AODs likely provide a lower AOD bias and root-mean-square-error than V4.51 AODs relative to coastal and island Aerosol Robotic Network (AERONET) AODs, as found in a validation study using data from June 2006 through October 2022. The technique described in this study contributes to CALIPSO's final V5 data products release and provides critical Sa information for future spaceborne elastic backscatter lidars.


  • Open Access

    Mitigating impacts of low energy laser pulses on CALIOP data products

    by Jason L. Tackett, Robert A. Ryan, Anne E. Garnier, Jayanta Kar, Brian J. Getzewich, Xia Cai, Mark A. Vaughan, Charles R. Trepte, Ron Verhappen, David M. Winker, et al.

    The spaceborne Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) experienced an increasing number of intermittent low energy laser pulses in the final 7 years of the Cloud-Aerosol Lidar and Infrared Pathfinder Observations (CALIPSO) mission due to coronal arcing within the laser canister as internal pressure levels decreased. Degraded data quality was initially observed primarily over the South Atlantic Anomaly (SAA) region, with impacts eventually spreading globally at lower rates. To preserve the integrity of the CALIOP data record, a suite of low energy mitigation (LEM) procedures was developed to reject data that is substantially impacted by low energy pulses on small, targeted scales to minimize data loss. LEM corrects level 1B calibration biases of −3 % to −4 % and reduces calibration uncertainties by 20 %–40 % at SAA-latitudes (0–50° S) for the 532 nm daytime and 1064 nm channels. LEM rejection in level 2 processing substantially reduces the occurrence of false feature detections. Horizontally averaged data segments that are LEM-affected (i.e., some low energy shots are present, but LEM determines the filtered profile is still acceptable) experience a signal-to-noise ratio reduction of 6 %–9 % which increases the probability of false detections, though this is mitigated somewhat by a slight increase in feature detection thresholds. Features identified in LEM-affected data are similar to unaffected features in terms of measured layer-averaged properties that are important for classification and subtyping. Overall, this evidence suggests that LEM has eliminated the major impacts of low energy pulses on data quality. LEM procedures were implemented in the version 4.51 level 1B data release and are implemented in all data levels of the final version 5 CALIOP data release.


  • Open Access

    response to comments from referee #1

    by Mark A. Vaughan, Jayanta Kar, Robert P. Damadeo, Mahesh Kovilakam, Jason L. Tackett, Charles R. Trepte

    Calibration of lidar signals at 1064 nm from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite depends on the prior calibration of the primary 532 nm channel. However, the 1064 nm calibration procedure also requires knowledge of the ratio of stratospheric signal attenuations at 1064 nm and 532 nm, which is not available a priori and thus is assumed to be 1. This assumption introduces a potential bias in the computed 1064 nm calibration coefficients. In this work we assess this bias by using independent multi-channel occultation retrievals of stratospheric aerosol extinction from the Stratospheric Aerosol and Gas Experiment (SAGE III) on the International Space Station (ISS) for the period 2017 onwards. We also use the GLObal Space based Stratospheric Aerosol Climatology (GloSSAC) to provide a historical background during the SAGE II era (1984 through 2005). The results show that the magnitude of the CALIOP 1064 nm calibration bias is less than 1–2 % within the tropics under stratospheric background conditions. However, recent biases can be as high as 5 % when volcanic perturbations and/or pyro-cumulonimbus (pyroCb) injections dominate the stratospheric aerosol loading. We explore the effects of this bias on CALIOP’s level 2 science retrievals by estimating the anticipated perturbations in cloud-aerosol discrimination (CAD) performance and by quantifying the non-linear propagation of errors in CALIOP’s 1064 nm extinction coefficients. This global characterization of the spectral attenuation differences should provide useful information for future spaceborne elastic lidars operating at 1064 nm.