SPSubham Pal

Subham Pal

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Subham Pal has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Comparison of nature‐inspired algorithms in finite element‐based metaheuristic optimisation of laminated shells

    by Subham Pal, Kanak Kalita, Salil Haldar

    This work presents a unique technique for optimising composite laminates used as structural components, which is critical for situations where failure might result in disastrous effects. Unlike traditional surrogate‐based optimisation approaches, this methodology combines the accurate modelling capabilities of finite element (FE) analysis with the iterative refining capacity of metaheuristic algorithms. By combining these two methodologies, our method intends to improve the design process of laminated shell structures, assuring robustness and dependability is crucial. Compared to existing benchmark solutions, the current FE shows a <1% error for cylindrical and spherical shells. The prime objective of this study is to identify the optimum ply angles for attaining a high fundamental frequency. The problem is NP‐hard because the possible ply angles span a wide range (±90°), making it difficult for optimisation algorithms to find a solution. Seven popular metaheuristic algorithms, namely the genetic algorithm (GA), the ant lion optimisation (ALO), the arithmetic optimisation algorithm (AOA), the dragonfly algorithm (DA), the grey wolf optimisation (GWO), the salp swarm optimisation (SSO), and the whale optimisation algorithm (WOA), are applied to and compared on a wide range of shell design problems. It assesses parameter sensitivity, discovering significant design elements that influence dynamic behaviour. Convergence studies demonstrate the superior performance of AOA, GWO, and WOA optimisers. Rigorous statistical comparisons assist practitioners in picking the best optimisation technique. FE‐GWO, FE‐DA, and FE‐SSA methods surpass the other techniques as well as the layerwise optimisation strategy. The findings obtained, employing the GWO, DA, and SSA optimisers, demonstrate ~3% improvement over the existing literature. With respect to conventional layup designs (cross‐ply and angle‐ply), the current optimised designs are better by at least 0.43% and as much as 48.91%.


  • Optimization of frequency separation of laminated shells carrying transversely distributed mass using genetic algorithm

    by Subham Pal, Kanak Kalita, Aditi Majumdar, Salil Haldar

    Shell structures are primarily used in the aerospace and maritime sectors. Such structures often oscillate, and undesirable oscillations can cause structural damage. So, to eliminate resonance and prevent damage to vibrating structures, it is necessary to build optimal shells. Maximizing the frequency gap between the first two eigenfrequencies is essential so that they do not coincide with the resonance frequency. Depending on the requirements of the design, the external frequencies might be placed between zero and the first natural frequency or between the first and second natural frequencies in order to prevent failure. This study proposes an efficient finite element model based on first-order shear deformation theory in combination with a genetic algorithm to maximize the frequency separation of laminated cylindrical shell panels. The maximum first natural frequency determined by the current FE-GA formulation is verified by previously published data, and it is found that the present results are better than the literature for 56% of the test cases. Moreover, for real-world situations like a clamped shell or a simply supported shell, the present solutions are approximately 0.6 to 2% better than the literature. Effect on the optimal design due to changes in mass ratio, curvature ratios of the shell panels, carrying dispersed mass over the entire shell panel, and dispersed patch mass at the middle is analyzed. The ideal stacking sequence for greatest frequency separation values is presented for a variety of curvature ratios and mass ratios.


  • Dynamic analysis of laminated shell panels with cutout and cracked corners carrying concentrated and distributed mass

    by Subham Pal, Kanak Kalita, Salil Haldar

    This article employs Mindlin’s first-order shear deformation theory to analyze the dynamic behavior of laminated composite shells with various geometries, featuring central cutouts and cracked corners that carry concentrated and distributed mass. The formulation considers an isoparametric element with nine nodes and five degrees of freedom per node. Both in-plane and transverse effects of mass are addressed by incorporating lumped mass with rotational inertia in the formulation. The obtained results are compared to previously published data, showing an excellent agreement with a variation of less than ±2.5% for all cases. Following validation, the study examines shell vibration for various geometries carrying concentrated mass, distributed mass, and distributed patch mass. Additionally, the dynamic analysis of shell panels with central cutouts and cracked corners with different cracked dimensions is conducted. Unique boundary conditions are introduced by applying them to both the outer and cutout edges (i.e., SSSS-CCCC, FFFF-CCCC).


  • Modal analysis of power law functionally graded material plates with rectangular cutouts

    by Kushal Jana, Subham Pal, Salil Haldar

    This article aims to analyze rectangular functionally graded material plates with rectangular cutouts of diverse sizes, numbers, and positions for free vibration using Mindlin’s first-order shear deformation theory (FSDT). Isoparametric plate elements of nine nodes and five degrees of freedom at each node were used for the present finite element formulation. The Poisson ratio is assumed to be constant throughout the plate. At first, results piled up from the present finite element formulation were compared with existing results collected from various previous journals for different isotropic plates and functionally graded material plates. After verification of finite element formulation, some new results (nondimensional fundamental frequency) were obtained considering various shapes, sizes, numbers, positions of cutouts, thickness ratio, aspect ratio, FGM power law index, and different edge conditions. Dynamic analysis of FGM plate with interior support along rectangular cutout edges is an integral part of this study.


  • Open Access

    Hybridized Particle Swarm—Gravitational Search Algorithm for Process Optimization

    by Rajendran Shankar, Narayanan Ganesh, Robert Čep, Rama Chandran Narayanan, Subham Pal, Kanak Kalita

    The optimization of industrial processes is a critical task for leveraging profitability and sustainability. To ensure the selection of optimum process parameter levels in any industrial process, numerous metaheuristic algorithms have been proposed so far. However, many algorithms are either computationally too expensive or become trapped in the pit of local optima. To counter these challenges, in this paper, a hybrid metaheuristic called PSO-GSA is employed that works by combining the iterative improvement capability of particle swarm optimization (PSO) and gravitational search algorithm (GSA). A binary PSO is also fused with GSA to develop a BPSO-GSA algorithm. Both the hybrid algorithms i.e., PSO-GSA and BPSO-GSA, are compared against traditional algorithms, such as tabu search (TS), genetic algorithm (GA), differential evolution (DE), GSA and PSO algorithms. Moreover, another popular hybrid algorithm DE-GA is also used for comparison. Since earlier works have already studied the performance of these algorithms on mathematical benchmark functions, in this paper, two real-world-applicable independent case studies on biodiesel production are considered. Based on the extensive comparisons, significantly better solutions are observed in the PSO-GSA algorithm as compared to the traditional algorithms. The outcomes of this work will be beneficial to similar studies that rely on polynomial models.


  • Open Access

    A Conceptual Comparison of Six Nature-Inspired Metaheuristic Algorithms in Process Optimization

    by Shankar Rajendran, Ganesh N., Robert Čep, Narayanan R. C., Subham Pal, Kanak Kalita

    In recent years, several high-performance nature-inspired metaheuristic algorithms have been proposed. It is important to study and compare the convergence, computational burden and statistical significance of these metaheuristics to aid future developments. This study focuses on six recent metaheuristics, namely, ant lion optimization (ALO), arithmetic optimization algorithm (AOA), dragonfly algorithm (DA), grey wolf optimizer (GWO), salp swarm algorithm (SSA) and whale optimization algorithm (WOA). Optimization of an industrial machining application is tackled in this paper. The optimal machining parameters (peak current, duty factor, wire tension and water pressure) of WEDM are predicted using the six aforementioned metaheuristics. The objective functions of the optimization study are to maximize the material removal rate (MRR) and minimize the wear ratio (WR) and surface roughness (SR). All of the current algorithms have been seen to surpass existing results, thereby indicating their superiority over conventional optimization algorithms.