Zhijian Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Zhijian Wu has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
Tuo Chen
State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China
5 shared publicationsPing Wang
Lanzhou Institute of Seismology, CEA, Lanzhou 730000, China
4 shared publicationsJun Bi
College of Transportation Science and Engineering, Nanjing Tech University, Nanjing, China
3 shared publicationsLan-Min Wang
Lanzhou Institute of Seismology, China Earthquake Administration
3 shared publicationsShengnian Wang
College of Transportation Science & Engineering, Nanjing Tech University, Nanjing, China
3 shared publicationsWei Ma
College of Transportation Engineering, Nanjing Tech University, Nanjing, China
3 shared publications
Latest Publications
- Open Access
- 13 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5457
Experimental Study on Shear Mechanical Properties of Pile–Soil Interface Under Freezing Conditions
In order to explore the rules for the variation in the adfreeze shear strength at the interface between frozen soil and a pile foundation, and their influencing factors, a measuring system was developed to estimate the freezing strength at the interface by utilizing a pile-pressing method under a cryogenic environment. Experimental results demonstrate that the maximum vertical pressure on the pile top increased significantly with the decrease in temperature under the same moisture content. The shear stress–shear displacement curves, at the bottom part of the interface, presented strain-softening characteristics, while the strain-hardening phenomenon was observed at the upper part of the interface. The strength parameters of the interface decreased with the increase in the pile depth. Moreover, the influence of temperature on the shear strength of the interface was more significant compared with that of the moisture content. The research results can provide references for the construction of pile foundations, structural design optimization, and for frozen damage prevention and treatment in permafrost regions.
- 13 May 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (10) , 5457
Open AccessExperimental Study on Shear Mechanical Properties of Pile–Soil Interface Under Freezing Conditions
In order to explore the rules for the variation in the adfreeze shear strength at the interface between frozen soil and a pile foundation, and their influencing factors, a measuring system was developed to estimate the freezing strength at the interface by utilizing a pile-pressing method under a cryogenic environment. Experimental results demonstrate that the maximum vertical pressure on the pile top increased significantly with the decrease in temperature under the same moisture content. The shear stress–shear displacement curves, at the bottom part of the interface, presented strain-softening characteristics, while the strain-hardening phenomenon was observed at the upper part of the interface. The strength parameters of the interface decreased with the increase in the pile depth. Moreover, the influence of temperature on the shear strength of the interface was more significant compared with that of the moisture content. The research results can provide references for the construction of pile foundations, structural design optimization, and for frozen damage prevention and treatment in permafrost regions.
- Open Access
- 9 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-17
Damage mechanism and evolution model of geopolymer stabilized coarse grained fillings subjected to repeated freeze-thaw actions
The freeze-thaw damage of cementitious coarse grained fillings (CCGFs) significantly affects the firmness, stability, and durability of high-speed railway subgrades. It is favorable to employ geopolymer binders to improve the engineering performance of coarse grained fillings (CGFs), further ensure the safety of high-speed railway subgrades in cold regions due to their excellent mechanical and environmental-friendly performances. This study conducted a series of freeze-thaw and mechanical tests on geopolymer stabilized coarse grained fillings (GSCGFs). The influence of gradation, compaction degree, and freeze-thaw cycles on the integrity, strength, and stiffness of GSCGFs was investigated. The evolution law of their freeze-thaw damage was discussed quantitatively based on an improved damage factor. The results show that the mass loss rate of Group B GSCGFs with a fine-grained particle content of less than 15% was lower than that of Group A GSCGFs with a fine particle content between 15% and 30% overall. When other conditions remain unchanged, the mass loss rate of GSCGFs decreased with the increase of compaction degree but increased nonlinearly with the freeze-thaw cycles. The strength and stiffness of GSCGFs decrease nonlinearly with the freeze-thaw cycles and presented a first fast and then slow-down change trend, their stiffness evolution at different compaction degrees revealed a big difference due to the weakening bite effect and enhancing overhead structure among rock blocks. The strength reduction of Group A GSCGFs was less than that of Group B under the high compaction degree. The stiffness deterioration of Group A GSCGFs was about twice that of Group B. There seemed to be no absolute correlation that the strength of GSCGFs was positively correlated with their stiffness. By building an exponential relationship between the compressive strength of GSCGFs and the freeze-thaw cycles that followed the findings of previous several studies, an improved exponential damage evaluation model was proposed to represent the performance degradation of GSCGFs. The outcomes of this study can provide theoretical support for understanding the physical and mechanical behaviors of GSCGFs and applying them in engineering practices.
- 9 April 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-17
Open AccessDamage mechanism and evolution model of geopolymer stabilized coarse grained fillings subjected to repeated freeze-thaw actions
The freeze-thaw damage of cementitious coarse grained fillings (CCGFs) significantly affects the firmness, stability, and durability of high-speed railway subgrades. It is favorable to employ geopolymer binders to improve the engineering performance of coarse grained fillings (CGFs), further ensure the safety of high-speed railway subgrades in cold regions due to their excellent mechanical and environmental-friendly performances. This study conducted a series of freeze-thaw and mechanical tests on geopolymer stabilized coarse grained fillings (GSCGFs). The influence of gradation, compaction degree, and freeze-thaw cycles on the integrity, strength, and stiffness of GSCGFs was investigated. The evolution law of their freeze-thaw damage was discussed quantitatively based on an improved damage factor. The results show that the mass loss rate of Group B GSCGFs with a fine-grained particle content of less than 15% was lower than that of Group A GSCGFs with a fine particle content between 15% and 30% overall. When other conditions remain unchanged, the mass loss rate of GSCGFs decreased with the increase of compaction degree but increased nonlinearly with the freeze-thaw cycles. The strength and stiffness of GSCGFs decrease nonlinearly with the freeze-thaw cycles and presented a first fast and then slow-down change trend, their stiffness evolution at different compaction degrees revealed a big difference due to the weakening bite effect and enhancing overhead structure among rock blocks. The strength reduction of Group A GSCGFs was less than that of Group B under the high compaction degree. The stiffness deterioration of Group A GSCGFs was about twice that of Group B. There seemed to be no absolute correlation that the strength of GSCGFs was positively correlated with their stiffness. By building an exponential relationship between the compressive strength of GSCGFs and the freeze-thaw cycles that followed the findings of previous several studies, an improved exponential damage evaluation model was proposed to represent the performance degradation of GSCGFs. The outcomes of this study can provide theoretical support for understanding the physical and mechanical behaviors of GSCGFs and applying them in engineering practices.
- Open Access
- 15 January 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-16
Unloading damage evolution and rockburst risk assessment of Xuefengshan No.1 tunnel by combining multiple approaches
Large-scale rock burst disasters often occur in high-stress and deep-buried tunnels, due to challenges in accurate forecasting and the lack of clarity regarding the underlying mechanisms largely. This study combined on-site stress drilling tests, coupled finite and discrete element simulations, and theoretical calculations to examine unloading damage, rockburst evolution, and deformation failure of the high-stress and deep-buried Xuefengshan No.1 tunnel. The initial geo-stress characteristics were inversed to explore the unloading damage evolution and failure mechanism. The influences of stress distribution, displacement development, and energy release on the stability and rock burst risk of surrounding rock masses were analyzed. The rock burst risks along this tunnel were assessed by the energy method and stress intensity ratio method comprehensively. The findings revealed that displacement convergence and stress release caused by unloading during tunnel excavation were most prominent at the tunnel invert and the arch waist on both sides. The displacement of the rock mass within the unloading zone exhibited a symmetrical distribution along the tunnel axis, with displacement gradually decreasing radially outward. The deep-buried granite and slate sustained greater damage during the rockburst compared to sandstone. There were approximately 6500 m of the Xuefengshan No.1 tunnel, accounting for 55.7% of its total length, possessing potential rock bursts, predominantly at weak to moderate levels. The likelihood of rock bursts increased with burial depth, with a marked rise in risk when the depth exceeded 300 m. The results of this study could provide valuable insights into the geo-stress characteristics and rockburst risk assessment for high-stress and deep-buried tunnels.
- 15 January 2025
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-16
Open AccessUnloading damage evolution and rockburst risk assessment of Xuefengshan No.1 tunnel by combining multiple approaches
Large-scale rock burst disasters often occur in high-stress and deep-buried tunnels, due to challenges in accurate forecasting and the lack of clarity regarding the underlying mechanisms largely. This study combined on-site stress drilling tests, coupled finite and discrete element simulations, and theoretical calculations to examine unloading damage, rockburst evolution, and deformation failure of the high-stress and deep-buried Xuefengshan No.1 tunnel. The initial geo-stress characteristics were inversed to explore the unloading damage evolution and failure mechanism. The influences of stress distribution, displacement development, and energy release on the stability and rock burst risk of surrounding rock masses were analyzed. The rock burst risks along this tunnel were assessed by the energy method and stress intensity ratio method comprehensively. The findings revealed that displacement convergence and stress release caused by unloading during tunnel excavation were most prominent at the tunnel invert and the arch waist on both sides. The displacement of the rock mass within the unloading zone exhibited a symmetrical distribution along the tunnel axis, with displacement gradually decreasing radially outward. The deep-buried granite and slate sustained greater damage during the rockburst compared to sandstone. There were approximately 6500 m of the Xuefengshan No.1 tunnel, accounting for 55.7% of its total length, possessing potential rock bursts, predominantly at weak to moderate levels. The likelihood of rock bursts increased with burial depth, with a marked rise in risk when the depth exceeded 300 m. The results of this study could provide valuable insights into the geo-stress characteristics and rockburst risk assessment for high-stress and deep-buried tunnels.
- Open Access
Influence of Rock Block Content on Mechanical Properties of Coarse-Grained Fillers Stabilized with Fiber and Geopolymer
This study employed fiber and geopolymer to enhance the engineering performance of coarse-grained fillers. By conducting a series of comparative mechanical tests, the ideal mass mixing ratio design of geopolymer and fiber was investigated first. Then, the influence of rock block content on the mechanical properties of coarse-grained fillers stabilized with fiber and geopolymer was explored. The deformation damage characteristics of fiber- and geopolymer-stabilized coarse-grained fillers with different rock block contents were also discussed in the final test. The results show that the ideal mass mixing ratio of geopolymer for coarse-grained filler stabilization was 15% of dry fine-grained soil in weight and the ideal dosage and length of fiber was 0.4% of dry fine-grained soil in weight and 1.2 × 10−2 m. The compressive strength of fiber- and geopolymer-stabilized coarse-grained fillers shows a tendency to increase first, then decrease, and then re-increase with the increase in rock block contents. The best compressive strength and resistance to deformation were achieved when the rock block content was 30%. The failure mode of fiber- and geopolymer-stabilized coarse-grained fillers translated from shearing slip to vertical splitting as the rock block content increased. This study can provide a reference and support for the engineering application of coarse-grained fillers stabilized with fiber and geopolymer.
Open AccessInfluence of Rock Block Content on Mechanical Properties of Coarse-Grained Fillers Stabilized with Fiber and Geopolymer
This study employed fiber and geopolymer to enhance the engineering performance of coarse-grained fillers. By conducting a series of comparative mechanical tests, the ideal mass mixing ratio design of geopolymer and fiber was investigated first. Then, the influence of rock block content on the mechanical properties of coarse-grained fillers stabilized with fiber and geopolymer was explored. The deformation damage characteristics of fiber- and geopolymer-stabilized coarse-grained fillers with different rock block contents were also discussed in the final test. The results show that the ideal mass mixing ratio of geopolymer for coarse-grained filler stabilization was 15% of dry fine-grained soil in weight and the ideal dosage and length of fiber was 0.4% of dry fine-grained soil in weight and 1.2 × 10−2 m. The compressive strength of fiber- and geopolymer-stabilized coarse-grained fillers shows a tendency to increase first, then decrease, and then re-increase with the increase in rock block contents. The best compressive strength and resistance to deformation were achieved when the rock block content was 30%. The failure mode of fiber- and geopolymer-stabilized coarse-grained fillers translated from shearing slip to vertical splitting as the rock block content increased. This study can provide a reference and support for the engineering application of coarse-grained fillers stabilized with fiber and geopolymer.
- Open Access
- 1 January 2024
- Published by Wiley in Shock and Vibration
- Vol. 2024 (1)
Field Testing and Numerical Simulation of the Dynamic Response of Loess Hill Site under High‐Speed Train Load
In this study, the loess hill site of an elevated bridge section in Tongwei‐Qin’an of the Baolan high‐speed railroad was selected as the research object, and the vibration acceleration of the loess hill site under the elevated bridge was tested in the field under the train operating load. The results show that under the same intensity of train load, the time range of vibration acceleration observed by field test and numerical simulation decays linearly with increasing distance from the source, while the amplification effect appears in the loess hill site at a greater distance, and the vibration duration also appears to increase. The vibration acceleration waveforms at each observation point observed by field tests and numerical simulations are similar, and the peak vertical acceleration at each observation point obtained from numerical simulations is overall greater than the peak acceleration at each point obtained from field tests, with aSimulated− max / aObservated− max values ranging from 1.04 to 1.63. The Fourier spectrum frequencies recorded by numerical simulation and field test are mainly concentrated in the range of 1∼40 Hz, but the difference between the main frequencies recorded by the two is large. The main frequency of the energy spectrum recorded by the numerical simulation is around 15 Hz, which is the same as the main frequency of the energy spectrum vibration of the input vibration wave, and the main frequency of the energy spectrum vibration recorded by the field test is around 25 Hz.
- 1 January 2024
- Published by Wiley in Shock and Vibration
- Vol. 2024 (1)
Open AccessField Testing and Numerical Simulation of the Dynamic Response of Loess Hill Site under High‐Speed Train Load
In this study, the loess hill site of an elevated bridge section in Tongwei‐Qin’an of the Baolan high‐speed railroad was selected as the research object, and the vibration acceleration of the loess hill site under the elevated bridge was tested in the field under the train operating load. The results show that under the same intensity of train load, the time range of vibration acceleration observed by field test and numerical simulation decays linearly with increasing distance from the source, while the amplification effect appears in the loess hill site at a greater distance, and the vibration duration also appears to increase. The vibration acceleration waveforms at each observation point observed by field tests and numerical simulations are similar, and the peak vertical acceleration at each observation point obtained from numerical simulations is overall greater than the peak acceleration at each point obtained from field tests, with aSimulated− max / aObservated− max values ranging from 1.04 to 1.63. The Fourier spectrum frequencies recorded by numerical simulation and field test are mainly concentrated in the range of 1∼40 Hz, but the difference between the main frequencies recorded by the two is large. The main frequency of the energy spectrum recorded by the numerical simulation is around 15 Hz, which is the same as the main frequency of the energy spectrum vibration of the input vibration wave, and the main frequency of the energy spectrum vibration recorded by the field test is around 25 Hz.
- 16 June 2023
- Published by Springer Nature in Natural Hazards
- Vol. 118 (2) , 1301-1314
Prediction of landslide hazards induced by potential earthquake in Litang County, Sichuan, China
- 16 June 2023
- Published by Springer Nature in Natural Hazards
- Vol. 118 (2) , 1301-1314
Prediction of landslide hazards induced by potential earthquake in Litang County, Sichuan, China
- 10 April 2023
- Published by Springer Nature in Natural Hazards
- Vol. 117 (3) , 2419-2434
Analysis of seismic damage of a highway bridge during the 2021 Ms 7.4 earthquake in Maduo County, China
- 10 April 2023
- Published by Springer Nature in Natural Hazards
- Vol. 117 (3) , 2419-2434
Analysis of seismic damage of a highway bridge during the 2021 Ms 7.4 earthquake in Maduo County, China
- Open Access
- 25 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Seismic effects of loess slopes using physical modeling and numerical simulation
A large shaking-table test of a loess slope with a geometric similarity ratio of 1:25 was established as a prototype model of the loess landslide in Yongguang Village, which occurred during the 2013 Minxian–Zhangxian M6.6 earthquake. Combined with finite-element–numerical-simulation software, the dynamic response characteristics of the loess slope were compared and analyzed under the action of the same Minxian horizontal seismic wave characteristics. The results show that the seismic waves observed in the model test and numerical simulation clearly exhibit non-linear amplification effects along the slope surface and in the loess vertical direction, reaching a maximum value at the top of the slope. The ground-motion acceleration waveforms observed in the model test and numerical simulation at each observation point of the slope were similar, and the horizontal peak ground acceleration (PGA) obtained from the numerical simulation at these locations was larger than that of the slope top. The horizontal aSimulated-max/aModel-max values ranged from 1.5 to 2.2 and the vertical aSimulated-max/aModel-max values were more discrete in the range of 0.5–2.7, while the horizontal and vertical-PGA-amplification factors at the slope surface were similar. The Fourier amplitude and main horizontal frequencies were mainly distributed between 0.1 and 12 Hz. The Fourier spectrum observed in the model test was approximately 0.5 Hz, while the main frequency of the vertical Fourier spectrum was approximately 4 Hz. Additionally, the main frequency of the horizontal and vertical Fourier spectra observed in the numerical simulation was approximately 2 and 1.2 Hz, respectively.
- 25 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Open AccessSeismic effects of loess slopes using physical modeling and numerical simulation
A large shaking-table test of a loess slope with a geometric similarity ratio of 1:25 was established as a prototype model of the loess landslide in Yongguang Village, which occurred during the 2013 Minxian–Zhangxian M6.6 earthquake. Combined with finite-element–numerical-simulation software, the dynamic response characteristics of the loess slope were compared and analyzed under the action of the same Minxian horizontal seismic wave characteristics. The results show that the seismic waves observed in the model test and numerical simulation clearly exhibit non-linear amplification effects along the slope surface and in the loess vertical direction, reaching a maximum value at the top of the slope. The ground-motion acceleration waveforms observed in the model test and numerical simulation at each observation point of the slope were similar, and the horizontal peak ground acceleration (PGA) obtained from the numerical simulation at these locations was larger than that of the slope top. The horizontal aSimulated-max/aModel-max values ranged from 1.5 to 2.2 and the vertical aSimulated-max/aModel-max values were more discrete in the range of 0.5–2.7, while the horizontal and vertical-PGA-amplification factors at the slope surface were similar. The Fourier amplitude and main horizontal frequencies were mainly distributed between 0.1 and 12 Hz. The Fourier spectrum observed in the model test was approximately 0.5 Hz, while the main frequency of the vertical Fourier spectrum was approximately 4 Hz. Additionally, the main frequency of the horizontal and vertical Fourier spectra observed in the numerical simulation was approximately 2 and 1.2 Hz, respectively.
- Open Access
- 16 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Investigation on unfrozen water content models of freezing soils
Unfrozen water content is a significant hydro-thermal property in numerical modeling in cold regions. Although numerous models have been developed to mimic the variation of unfrozen water content with subzero temperature, comprehensive evaluation of unfrozen water content models is scarce. This study collected a total of 29 models and divided them into four categories, namely, theoretical models, soil water characteristic curve (SWCC)-based models, empirical models, and estimation models. These models were evaluated with 1278 experimental points from 16 studies covering multiple soil types, including 24 clays, 18 silty clays, 7 silts, 19 sands, and 10 sandstones. Root mean square error and average deviations were applied to judge the performance of these models. Most unfrozen water content models can well simulate the relationship between unfrozen water content and subzero temperature. Among the aforementioned four categories of unfrozen water content models, Lizhm et al. model, Fredlund and Xing (C=1)-Wen model, Kozlowski empirical model, and Kozlowski estimation model performed best in their respective categories. Compared to the rest three categories, estimation models can be applied to predict the variation of unfrozen water content with subzero temperature by some easy-to-obtain soil physical parameters and provide guidance for the development of unfrozen water content models.
- 16 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Open AccessInvestigation on unfrozen water content models of freezing soils
Unfrozen water content is a significant hydro-thermal property in numerical modeling in cold regions. Although numerous models have been developed to mimic the variation of unfrozen water content with subzero temperature, comprehensive evaluation of unfrozen water content models is scarce. This study collected a total of 29 models and divided them into four categories, namely, theoretical models, soil water characteristic curve (SWCC)-based models, empirical models, and estimation models. These models were evaluated with 1278 experimental points from 16 studies covering multiple soil types, including 24 clays, 18 silty clays, 7 silts, 19 sands, and 10 sandstones. Root mean square error and average deviations were applied to judge the performance of these models. Most unfrozen water content models can well simulate the relationship between unfrozen water content and subzero temperature. Among the aforementioned four categories of unfrozen water content models, Lizhm et al. model, Fredlund and Xing (C=1)-Wen model, Kozlowski empirical model, and Kozlowski estimation model performed best in their respective categories. Compared to the rest three categories, estimation models can be applied to predict the variation of unfrozen water content with subzero temperature by some easy-to-obtain soil physical parameters and provide guidance for the development of unfrozen water content models.
- Open Access
- 11 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Study on soil freezing characteristic curve during a freezing-thawing process
Soil freezing characteristic curve (SFCC) defines the relationship between unfrozen water content and subzero temperature. The SFCC is widely applied to estimate the soil properties. The current study explored the effects of initial water content, dry density, soil type and desalination on the SFCC during a freezing-thawing process. It showed that the initial water content, soil type and desalination had great impacts on SFCC, while the dry density had an insignificant effect on SFCC. Hysteresis behavior was observed for all the soil samples. The hysteresis behavior was obvious in the temperature range of -5°C < T < 0, but not obvious in the temperature range of T ≤ -10 °C. A new equation containing freezing/thawing point was proposed to model the SFCC. The new model and four SFCC models were evaluated with measured data in this study. It showed that the new model performed best among these models. The new model accurately mimics the SFCC and is continuous near the freezing/thawing point and 0 °C. It can be easily incorporated into numerical algorithms for coupled heat and mass transfer in cold regions.
- 11 January 2023
- Published by Frontiers Media SA in Frontiers in Earth Science
- Vol. 10
Open AccessStudy on soil freezing characteristic curve during a freezing-thawing process
Soil freezing characteristic curve (SFCC) defines the relationship between unfrozen water content and subzero temperature. The SFCC is widely applied to estimate the soil properties. The current study explored the effects of initial water content, dry density, soil type and desalination on the SFCC during a freezing-thawing process. It showed that the initial water content, soil type and desalination had great impacts on SFCC, while the dry density had an insignificant effect on SFCC. Hysteresis behavior was observed for all the soil samples. The hysteresis behavior was obvious in the temperature range of -5°C < T < 0, but not obvious in the temperature range of T ≤ -10 °C. A new equation containing freezing/thawing point was proposed to model the SFCC. The new model and four SFCC models were evaluated with measured data in this study. It showed that the new model performed best among these models. The new model accurately mimics the SFCC and is continuous near the freezing/thawing point and 0 °C. It can be easily incorporated into numerical algorithms for coupled heat and mass transfer in cold regions.