Min-Su Park
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Min-Su Park has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Youn-Ju Jeong
Department of Structural Engineering Research, Korea Institute of Civil Engineering and Building Technology, Goyang 10223, Republic of Korea
13 shared publications - Young-Jun You
Structural Engineering Department, Korea Institute of Civil Engineering and Building Technology (KICT), Goyang-Si 10223, Korea
8 shared publications - Jeongsoo Kim
Infrastructure Safety Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Gyeonggi-Do 10223, Korea
5 shared publications - Sung-Hoon Song
Infrastructure Safety Research Institute, Korea Institute of Civil Engineering and Building Technology, Goyang-Si, Gyeonggi-Do 10223, Korea
3 shared publications Young Taek Kim
3 shared publicationsJiyoung Min
2 shared publications
Latest Publications
- Open Access
- 24 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 196
Experimental Study on the Energy Absorption, Ductility, and Stiffness of CFDS Connections for Floating Offshore Structures
This study experimentally evaluates the structural performance of Concrete-Filled Double-Skin (CFDS) hybrid connections that are intended as key components of large-scale floating offshore wind substructures. The innovative aspect of this work lies in the direct experimental comparison of five representative connection details—Headed Stud (HS), Perfobond (PB), L-beam-joint (LJ), L-beam-spacing (LS), and Angle (AN)—with respect to multiple performance indices that are critical under harsh offshore environments. First, full-scale CFDS specimens were fabricated with identical global dimensions while varying only the connection details. The hybrid behavior of the CFDS system arises from the complementary actions of the outer steel tube, which primarily resists tensile forces, and the infilled concrete, which provides dominant compressive resistance and confinement. This composite interaction enhances the stiffness, ductility, and energy absorption capacity of the member under flexural demands, which are essential for floating offshore structures operating under complex marine loading. Second, monotonic bending tests were conducted using a 2000 kN actuator under a cantilever-type configuration, and load–displacement responses were recorded at three locations. Third, the stiffness, ductility, and energy absorption capacity (toughness) were quantified from the measured curves to clarify the deformation and failure characteristics of each connection type. The results show that the PB connection achieved the highest maximum load and exhibited stable ductile behavior with plastic energy dominating the total toughness. The LJ connection provided well-balanced stiffness and deformation capacity with low sensitivity to measurement locations, indicating high reliability for design applications. In contrast, the HS and LS connections experienced localized slip and position-dependent stiffness, while the AN connection showed the lowest load-carrying efficiency. Overall, the findings highlight that connection-level detailing has a decisive influence on the global performance of CFDS hybrid members and provide fundamental data for developing design guidelines for floating offshore structures operating under complex marine loading conditions.
- 24 December 2025
- Published by MDPI AG in Applied Sciences
- Vol. 16 (1) , 196
Open AccessExperimental Study on the Energy Absorption, Ductility, and Stiffness of CFDS Connections for Floating Offshore Structures
This study experimentally evaluates the structural performance of Concrete-Filled Double-Skin (CFDS) hybrid connections that are intended as key components of large-scale floating offshore wind substructures. The innovative aspect of this work lies in the direct experimental comparison of five representative connection details—Headed Stud (HS), Perfobond (PB), L-beam-joint (LJ), L-beam-spacing (LS), and Angle (AN)—with respect to multiple performance indices that are critical under harsh offshore environments. First, full-scale CFDS specimens were fabricated with identical global dimensions while varying only the connection details. The hybrid behavior of the CFDS system arises from the complementary actions of the outer steel tube, which primarily resists tensile forces, and the infilled concrete, which provides dominant compressive resistance and confinement. This composite interaction enhances the stiffness, ductility, and energy absorption capacity of the member under flexural demands, which are essential for floating offshore structures operating under complex marine loading. Second, monotonic bending tests were conducted using a 2000 kN actuator under a cantilever-type configuration, and load–displacement responses were recorded at three locations. Third, the stiffness, ductility, and energy absorption capacity (toughness) were quantified from the measured curves to clarify the deformation and failure characteristics of each connection type. The results show that the PB connection achieved the highest maximum load and exhibited stable ductile behavior with plastic energy dominating the total toughness. The LJ connection provided well-balanced stiffness and deformation capacity with low sensitivity to measurement locations, indicating high reliability for design applications. In contrast, the HS and LS connections experienced localized slip and position-dependent stiffness, while the AN connection showed the lowest load-carrying efficiency. Overall, the findings highlight that connection-level detailing has a decisive influence on the global performance of CFDS hybrid members and provide fundamental data for developing design guidelines for floating offshore structures operating under complex marine loading conditions.
- Open Access
- 19 February 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (2) , 385
Experimental Study on Enhanced Serviceability for Human Activities of Floating Structures with Wave-Dissipating Modules
This study evaluates the serviceability of floating structures designed for marine cities by incorporating wave-dissipating modules. Small-scale model tests in a 2D wave flume were conducted to compare the serviceability of structures with and without these modules under different wave conditions (1-year and 100-year return period waves). The results showed that wave-dissipating modules significantly reduced vertical acceleration, with reductions of approximately 44~45% levels for 1-year return period waves and 54~57% levels for 100-year return period waves. When a topside building was included, the reductions were similarly pronounced, reaching 64% and 63~64% levels for 1-year and 100-year return period waves, respectively. The modules also mitigated inclination (angle), with reduction rates ranging from 55~77% levels, depending on wave conditions and the presence of a topside building. These findings suggest that incorporating wave-dissipating modules around the periphery of floating structures can enhance their serviceability by creating more comfortable and stable environments for human activities, while also improving the stability of the structures themselves. Future research should focus on scaling up the model tests and conducting field experiments to validate these findings under real conditions, as well as optimizing module designs for different wave conditions and structural configurations.
- 19 February 2025
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 13 (2) , 385
Open AccessExperimental Study on Enhanced Serviceability for Human Activities of Floating Structures with Wave-Dissipating Modules
This study evaluates the serviceability of floating structures designed for marine cities by incorporating wave-dissipating modules. Small-scale model tests in a 2D wave flume were conducted to compare the serviceability of structures with and without these modules under different wave conditions (1-year and 100-year return period waves). The results showed that wave-dissipating modules significantly reduced vertical acceleration, with reductions of approximately 44~45% levels for 1-year return period waves and 54~57% levels for 100-year return period waves. When a topside building was included, the reductions were similarly pronounced, reaching 64% and 63~64% levels for 1-year and 100-year return period waves, respectively. The modules also mitigated inclination (angle), with reduction rates ranging from 55~77% levels, depending on wave conditions and the presence of a topside building. These findings suggest that incorporating wave-dissipating modules around the periphery of floating structures can enhance their serviceability by creating more comfortable and stable environments for human activities, while also improving the stability of the structures themselves. Future research should focus on scaling up the model tests and conducting field experiments to validate these findings under real conditions, as well as optimizing module designs for different wave conditions and structural configurations.
- Open Access
- 13 December 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (6) , 233-246
Time Response Analysis of Caissons by Installing New Caisson on Existing Caisson Breakwater in Irregular Wave Condition
The design and the construction were carried out by installing new caissons on the back or the front of existing caissons to increase the structural stability of caisson breakwaters. In this study, we used the ANSYS AQWA program to analyze the wave forces acting on individual caissons according to the effects of wave-structure interaction when new caissons were additionally installed on existing caisson breakwaters. The wave force characteristics acting on the individual caisson were analyzed according to the distance among caissons in frequency domain analysis. In addition, the dynamic wave force characteristics were closely examined on the basis of the frequency at which the unusual distribution of wave forces occurs in irregular wave conditions using time domain analysis.
- 13 December 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (6) , 233-246
Open AccessTime Response Analysis of Caissons by Installing New Caisson on Existing Caisson Breakwater in Irregular Wave Condition
The design and the construction were carried out by installing new caissons on the back or the front of existing caissons to increase the structural stability of caisson breakwaters. In this study, we used the ANSYS AQWA program to analyze the wave forces acting on individual caissons according to the effects of wave-structure interaction when new caissons were additionally installed on existing caisson breakwaters. The wave force characteristics acting on the individual caisson were analyzed according to the distance among caissons in frequency domain analysis. In addition, the dynamic wave force characteristics were closely examined on the basis of the frequency at which the unusual distribution of wave forces occurs in irregular wave conditions using time domain analysis.
- Open Access
- 13 December 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (6) , 275-289
Hydrodynamic Response Analysis of Hybrid Floating Structure according to Length of Damping Plate
New businesses such as marine leisure and floating construction have recently flourished on the coast. As a result, consideration is given to a floating structure appropriate for marine environments. In this study, we applied a damping plate to increase the stability of a hybrid floating structure that was expanded by vertical and horizontal stacking of mobile unit modules. In the numerical analysis using ANSYS AQWA, the behavioral characteristics of the floating structure were analyzed according to the length change of the damping plate. However, the wave forces acting on a floating structure are excessively calculated by the resonance of fluid surrounded by the structure in the numerical analysis using potential flow. Therefore, we used the damping zone option of the ANSYS AQWA in the frequency domain analysis.
- 13 December 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (6) , 275-289
Open AccessHydrodynamic Response Analysis of Hybrid Floating Structure according to Length of Damping Plate
New businesses such as marine leisure and floating construction have recently flourished on the coast. As a result, consideration is given to a floating structure appropriate for marine environments. In this study, we applied a damping plate to increase the stability of a hybrid floating structure that was expanded by vertical and horizontal stacking of mobile unit modules. In the numerical analysis using ANSYS AQWA, the behavioral characteristics of the floating structure were analyzed according to the length change of the damping plate. However, the wave forces acting on a floating structure are excessively calculated by the resonance of fluid surrounded by the structure in the numerical analysis using potential flow. Therefore, we used the damping zone option of the ANSYS AQWA in the frequency domain analysis.
- Open Access
- 11 October 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (5) , 156-168
Interaction Analysis between Waves and Caissons by Damping Zone Effect for Installing New Caisson on Old Caisson Breakwater
The design and construction are carried out to improve the structural stability of caisson breakwaters by installing new caissons on the front or rear of old caissons. The wave forces acting on caisson are excessively calculated by the resonance of fluid existing between the old caisson and the new caisson in the numerical analysis using potential flow. In this study, we used the damping zone option in ANSYS AQWA program to analyze the wave forces acting on individual caissons according to the interaction effects between the incident wave and the caisson. By applying the damping zone option to the fluid in which resonance occurs, the wave forces acting on individual caissons were calculated by the change of damping factor. In addition, the wave force characteristics acting on individual caissons were analyzed for the different distances between caissons in the frequency domain analysis.
- 11 October 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (5) , 156-168
Open AccessInteraction Analysis between Waves and Caissons by Damping Zone Effect for Installing New Caisson on Old Caisson Breakwater
The design and construction are carried out to improve the structural stability of caisson breakwaters by installing new caissons on the front or rear of old caissons. The wave forces acting on caisson are excessively calculated by the resonance of fluid existing between the old caisson and the new caisson in the numerical analysis using potential flow. In this study, we used the damping zone option in ANSYS AQWA program to analyze the wave forces acting on individual caissons according to the interaction effects between the incident wave and the caisson. By applying the damping zone option to the fluid in which resonance occurs, the wave forces acting on individual caissons were calculated by the change of damping factor. In addition, the wave force characteristics acting on individual caissons were analyzed for the different distances between caissons in the frequency domain analysis.
- Open Access
- 8 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (12) , 5845
Experimental Capture Width Ratio on Unit Module System of Hybrid Wave Energy Converter for Nearshore
This study proposes a new hybrid wave energy converter composed of a horizontal cylinder and a swing plate to improve the capture width ratio. The horizontal cylinder generates electrical energy by using the potential energy of the incident wave, whereas the swing plate produces electrical energy by using the kinetic energy of the water particles. The converter can improve the capture width ratio of the wave energy by efficiently combining the energies generated by these two different sources. The power-generating performance of the proposed hybrid wave energy converter is evaluated experimentally through a hydraulic model test at a scale ratio of 0.3 in a two-dimensional wave tank using direct conversion by a dynamo PTO (Power Take-Off) system. The dynamic power-generation characteristics of the hybrid wave energy converter are analyzed with respect to the eventual regularity of the incident wave (regular and irregular wave conditions), and the data necessary for the design of the generator and control system are acquired.
- 8 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (12) , 5845
Open AccessExperimental Capture Width Ratio on Unit Module System of Hybrid Wave Energy Converter for Nearshore
This study proposes a new hybrid wave energy converter composed of a horizontal cylinder and a swing plate to improve the capture width ratio. The horizontal cylinder generates electrical energy by using the potential energy of the incident wave, whereas the swing plate produces electrical energy by using the kinetic energy of the water particles. The converter can improve the capture width ratio of the wave energy by efficiently combining the energies generated by these two different sources. The power-generating performance of the proposed hybrid wave energy converter is evaluated experimentally through a hydraulic model test at a scale ratio of 0.3 in a two-dimensional wave tank using direct conversion by a dynamo PTO (Power Take-Off) system. The dynamic power-generation characteristics of the hybrid wave energy converter are analyzed with respect to the eventual regularity of the incident wave (regular and irregular wave conditions), and the data necessary for the design of the generator and control system are acquired.
- Open Access
- 25 December 2021
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 33 (6) , 345-356
Interaction Effect between Caissons by Installation of New Caisson on Existing Caisson Breakwater in Second Order Stokes Wave Condition
In order to increase the structural stability of existing caisson breakwater, the design and the construction is carried out by installation of new caissons on the back or the front of old caissons. In this study, we use the ANSYS AQWA program to analyze the wave forces acting on individual caisson according to effects of wave structure interaction when new caissons are additionally installed on existing caisson breakwater. Firstly, the wave force characteristics acting on the individual caisson were analyzed for each period (frequency) in the frequency domain. In time domain analysis, the dynamic wave force characteristics were strongly influenced by the distance between caissons on the frequency at which the unusual distribution of wave forces occurs.
- 25 December 2021
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 33 (6) , 345-356
Open AccessInteraction Effect between Caissons by Installation of New Caisson on Existing Caisson Breakwater in Second Order Stokes Wave Condition
In order to increase the structural stability of existing caisson breakwater, the design and the construction is carried out by installation of new caissons on the back or the front of old caissons. In this study, we use the ANSYS AQWA program to analyze the wave forces acting on individual caisson according to effects of wave structure interaction when new caissons are additionally installed on existing caisson breakwater. Firstly, the wave force characteristics acting on the individual caisson were analyzed for each period (frequency) in the frequency domain. In time domain analysis, the dynamic wave force characteristics were strongly influenced by the distance between caissons on the frequency at which the unusual distribution of wave forces occurs.
- Open Access
- 2 December 2020
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 32 (6) , 396-410
Characteristics of Wave by Additional Installation of Porous Dual Circular Caissons on the Existing Breakwater
- 2 December 2020
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 32 (6) , 396-410
Open AccessCharacteristics of Wave by Additional Installation of Porous Dual Circular Caissons on the Existing Breakwater
- Open Access
- 2 December 2020
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 32 (6) , 420-433
Characteristics of Wave on Circular Breakwater of Double Array by Various Porous Coefficients among Circular Caissons
- 2 December 2020
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 32 (6) , 420-433
Open AccessCharacteristics of Wave on Circular Breakwater of Double Array by Various Porous Coefficients among Circular Caissons
- 1 December 2020
- Published by Computational Structural Engineering Institute of Korea in Journal of the Computational Structural Engineering Institute of Korea
- Vol. 33 (6) , 391-399
Structural Behavior Analysis of Cap Shaped as an Arch for Suction-Installed Cofferdam
- 1 December 2020
- Published by Computational Structural Engineering Institute of Korea in Journal of the Computational Structural Engineering Institute of Korea
- Vol. 33 (6) , 391-399
Structural Behavior Analysis of Cap Shaped as an Arch for Suction-Installed Cofferdam