Dooho Lee
Research Subjects
Dooho Lee has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Sun-Yong Kim
5 shared publicationsTae-Soo Ahn
SEGI Engineering Inc
5 shared publicationsBong-Ki Kim
Korea Inst Machinery & Mat, Acoust Res Team, Daejeon, South Korea
1 shared publication- Byeong Dong Youn
Department of Mechanical Engineering, Seoul National University, Seoul 08826, Republic of Korea
1 shared publication Byung C. Jung
University of Maryland
1 shared publicationDong-Hwan Ki
1 shared publication
Latest Publications
- Open Access
- 20 September 2026
- Published by Elsevier in SSRN Electronic Journal
Complex Frequency Response Function Similarity Metric and Its Application to Inverse Problems
This study proposes a concise and effective similarity metric, termed Complex Frequency Response Function Similarity Metric(cFRFSM), for comparing frequency‐response functions (FRFs) in both magnitude and phase. The metric provides a normalized measure in the range [0,1], formulated by integrating a geometric interpretation of complex FRF vectors with a likelihood‐function concept based on the standard normal distribution. This formulation enables intuitive evaluation of FRF similarity at individual frequencies as well as over selected frequency bands. By jointly considering the previously introduced FRFSM, the cFRFSM offers a unified framework that clearly distinguishes overall discrepancies and the respective contributions of magnitude and phase differences. The characteristics and usefulness of the proposed metric were examined through applications to analytical and numerical models exhibiting modified FRFs. The cFRFSM successfully revealed the nature of FRF deviations and guided model updating in a clamped‐beam example, where incorporation of a time‐delay parameter significantly improved the agreement between analytical and measured responses. The metric was further applied to a complex rail structure, demonstrating its capability to identify joint parameters through multi‐objective optimization. Across these examples, the cFRFSM functioned as an effective objective function and provided clear diagnostic insight into model accuracy. Given its simplicity, interpretability, and robustness, the cFRFSM metric is expected to be valuable in broader applications such as structural damage detection, calibration of analytical models, and FRF‐based validation of complex structural systems.
- 20 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessComplex Frequency Response Function Similarity Metric and Its Application to Inverse Problems
This study proposes a concise and effective similarity metric, termed Complex Frequency Response Function Similarity Metric(cFRFSM), for comparing frequency‐response functions (FRFs) in both magnitude and phase. The metric provides a normalized measure in the range [0,1], formulated by integrating a geometric interpretation of complex FRF vectors with a likelihood‐function concept based on the standard normal distribution. This formulation enables intuitive evaluation of FRF similarity at individual frequencies as well as over selected frequency bands. By jointly considering the previously introduced FRFSM, the cFRFSM offers a unified framework that clearly distinguishes overall discrepancies and the respective contributions of magnitude and phase differences. The characteristics and usefulness of the proposed metric were examined through applications to analytical and numerical models exhibiting modified FRFs. The cFRFSM successfully revealed the nature of FRF deviations and guided model updating in a clamped‐beam example, where incorporation of a time‐delay parameter significantly improved the agreement between analytical and measured responses. The metric was further applied to a complex rail structure, demonstrating its capability to identify joint parameters through multi‐objective optimization. Across these examples, the cFRFSM functioned as an effective objective function and provided clear diagnostic insight into model accuracy. Given its simplicity, interpretability, and robustness, the cFRFSM metric is expected to be valuable in broader applications such as structural damage detection, calibration of analytical models, and FRF‐based validation of complex structural systems.
- 1 July 2025
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 39 (7) , 3835-3848
Estimation of substructure frequency response functions from operational responses only using a deep learning approach
- 1 July 2025
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 39 (7) , 3835-3848
Estimation of substructure frequency response functions from operational responses only using a deep learning approach
- 10 November 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (11) , 5739-5750
Transfer path analysis using deep neural networks trained by measured operational responses
- 10 November 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (11) , 5739-5750
Transfer path analysis using deep neural networks trained by measured operational responses
- 3 October 2023
- Published by Elsevier in Applied Acoustics
- Vol. 214
Experimental investigation of a modular helix-acoustic black hole
- 3 October 2023
- Published by Elsevier in Applied Acoustics
- Vol. 214
Experimental investigation of a modular helix-acoustic black hole
- 4 July 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (7) , 3437-3444
Updating of the complete joint characteristics of finite element model via FRF-based substructuring of complex structures
- 4 July 2023
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 37 (7) , 3437-3444
Updating of the complete joint characteristics of finite element model via FRF-based substructuring of complex structures
- 21 December 2020
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 28 (5-6) , 615-625
Numerical simulation of characteristics of wave propagation and reflection coefficient in a helix-acoustic black hole
A new type of the acoustic black hole beam—a helix-acoustic black hole—is proposed to overcome the spatial restriction on modular acoustic black hole structures. The modular acoustic black hole structure, consisted of a base and several number of acoustic black hole beams, has potential to apply into real engineering world. There are two main sections in an acoustic black hole beam: (1) a uniform thickness part and (2) an acoustic black hole region of which the thickness decreases according to the power-law profile. Conventional acoustic black hole beams can be ultimately assembled as 8–10 acoustic black hole beams on a modular acoustic black hole structure. In this article, a different shape of an acoustic black hole beam is newly designed to allow the assembly of more acoustic black hole beams on the modular acoustic black hole structure. The shape of the helix-acoustic black hole is such that the thickness of the acoustic black hole region smoothly decreases, just like a conventional acoustic black hole beam, as well as twisting along the longitudinal direction. The normal direction of the bottom surface in the uniform thickness is the same along the longitudinal axis in the conventional acoustic black hole beam. However, the normal direction of the helix-acoustic black hole of the bottom surface in the acoustic black hole region is different along the longitudinal direction. It is necessary to use numerical simulations to explore the performance of the helix-acoustic black hole beam because the shape of acoustic black hole region is different from the conventional one. Two types of numerical simulations were conducted: transient analysis and modal frequency analysis. From the transient analysis, the acoustic black hole effect was investigated by comparing the travel time which is dependent on the variation of the thickness. Using modal frequency analysis, the reflection coefficients between the conventional acoustic black hole beam and helix-acoustic black hole beam are also compared. It is noted that reflection coefficients were additionally compared depending on how “sharply” or “smoothly” they were twisted in the acoustic black hole region of the helix-acoustic black hole. Those results demonstrate that the helix-acoustic black hole has a dynamic characteristic similar to that of conventional acoustic black hole beams, which means that more helix-acoustic black holes can be assembled on the modular acoustic black hole structure by resolving the spatial restriction and leading to expectations of better performance.
- 21 December 2020
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 28 (5-6) , 615-625
Numerical simulation of characteristics of wave propagation and reflection coefficient in a helix-acoustic black hole
A new type of the acoustic black hole beam—a helix-acoustic black hole—is proposed to overcome the spatial restriction on modular acoustic black hole structures. The modular acoustic black hole structure, consisted of a base and several number of acoustic black hole beams, has potential to apply into real engineering world. There are two main sections in an acoustic black hole beam: (1) a uniform thickness part and (2) an acoustic black hole region of which the thickness decreases according to the power-law profile. Conventional acoustic black hole beams can be ultimately assembled as 8–10 acoustic black hole beams on a modular acoustic black hole structure. In this article, a different shape of an acoustic black hole beam is newly designed to allow the assembly of more acoustic black hole beams on the modular acoustic black hole structure. The shape of the helix-acoustic black hole is such that the thickness of the acoustic black hole region smoothly decreases, just like a conventional acoustic black hole beam, as well as twisting along the longitudinal direction. The normal direction of the bottom surface in the uniform thickness is the same along the longitudinal axis in the conventional acoustic black hole beam. However, the normal direction of the helix-acoustic black hole of the bottom surface in the acoustic black hole region is different along the longitudinal direction. It is necessary to use numerical simulations to explore the performance of the helix-acoustic black hole beam because the shape of acoustic black hole region is different from the conventional one. Two types of numerical simulations were conducted: transient analysis and modal frequency analysis. From the transient analysis, the acoustic black hole effect was investigated by comparing the travel time which is dependent on the variation of the thickness. Using modal frequency analysis, the reflection coefficients between the conventional acoustic black hole beam and helix-acoustic black hole beam are also compared. It is noted that reflection coefficients were additionally compared depending on how “sharply” or “smoothly” they were twisted in the acoustic black hole region of the helix-acoustic black hole. Those results demonstrate that the helix-acoustic black hole has a dynamic characteristic similar to that of conventional acoustic black hole beams, which means that more helix-acoustic black holes can be assembled on the modular acoustic black hole structure by resolving the spatial restriction and leading to expectations of better performance.
- 3 March 2020
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 34 (3) , 1023-1033
Operational transfer path analysis based on deep neural network: Numerical validation
- 3 March 2020
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 34 (3) , 1023-1033
Operational transfer path analysis based on deep neural network: Numerical validation
- 13 August 2018
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 32 (8) , 3547-3555
Numerical analysis of wave energy dissipation by damping treatments in a plate with acoustic black holes
- 13 August 2018
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 32 (8) , 3547-3555
Numerical analysis of wave energy dissipation by damping treatments in a plate with acoustic black holes
- 21 June 2018
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 32 (6) , 2487-2495
Predictive model of dynamic properties of elastomers in thermal degradation environment
- 21 June 2018
- Published by Springer Nature in Journal of Mechanical Science and Technology
- Vol. 32 (6) , 2487-2495
Predictive model of dynamic properties of elastomers in thermal degradation environment
- 31 March 2018
- Published by The Korean Society of Mechanical Engineers in Transactions of the Korean Society of Mechanical Engineers - A
- Vol. 42 (3) , 231-237
Comparison of the Measurement Methods of Underwater Radiation Efficiency Using a Finite Element/Boundary Element Coupled Model
수중방사효율은 수중 구조물의 소음방사특성을 파악하는 중요한 특성값이다. 본 논문에서는 수중방사소음을 측정하는 근접장 방법과 원음장 방법의 측정특성을 수치모델을 통한 모사 실험을 통해서 비교한다. 수치모델은 수중에 잠겨있는 원형 구체를 유한요소/경계요소 연성해석법을 이용하여 모델링하였고 해석해와 비교하여 그 응답계산 과정을 검증하였다. 수중방사효율 수치모사실험 계산결과를 보면 저주파수 대역에서 근접장 및 원음장 측정법이 방사효율을 과대평가할 수 있으며, 근접장 측정법의 경우 그 크기가 10 dB에 이를 수 있다는 것을 보였다. 그러므로 수중 방사효율의 측정은 실험시에는 이러한 측정 특성을 고려하고 신호대잡음비와의 적정한 균형을 통해서 시험 방법을 선택하고 측정이 수행되어야 보다 엄밀한 수중방사소음의 특성을 파악할 수 있을 것이다.
- 31 March 2018
- Published by The Korean Society of Mechanical Engineers in Transactions of the Korean Society of Mechanical Engineers - A
- Vol. 42 (3) , 231-237
Comparison of the Measurement Methods of Underwater Radiation Efficiency Using a Finite Element/Boundary Element Coupled Model
수중방사효율은 수중 구조물의 소음방사특성을 파악하는 중요한 특성값이다. 본 논문에서는 수중방사소음을 측정하는 근접장 방법과 원음장 방법의 측정특성을 수치모델을 통한 모사 실험을 통해서 비교한다. 수치모델은 수중에 잠겨있는 원형 구체를 유한요소/경계요소 연성해석법을 이용하여 모델링하였고 해석해와 비교하여 그 응답계산 과정을 검증하였다. 수중방사효율 수치모사실험 계산결과를 보면 저주파수 대역에서 근접장 및 원음장 측정법이 방사효율을 과대평가할 수 있으며, 근접장 측정법의 경우 그 크기가 10 dB에 이를 수 있다는 것을 보였다. 그러므로 수중 방사효율의 측정은 실험시에는 이러한 측정 특성을 고려하고 신호대잡음비와의 적정한 균형을 통해서 시험 방법을 선택하고 측정이 수행되어야 보다 엄밀한 수중방사소음의 특성을 파악할 수 있을 것이다.