Hye-Sook Park

We determine the crystal structure and temperature of tantalum ramp and shock ramp compressed to hundreds of gigapascals at the National Ignition Facility. With x-ray diffraction, we find that tantalum remains in the body-centered-cubic structure with no evidence for the proposed phase up to ramp-compression stresses of 531 . 7 − 18.7 + 21.3 GPa . In separate experiments measuring single-shot extended x-ray absorption fine structure (EXAFS) at the L 3 edge, we find that tantalum's temperature agrees well with radiation-hydrodynamics calculations incorporating strength models for ramp and shock-ramp compression to ∼ 200 GPa , but not ∼ 400 GPa . The discrepancy at ∼ 400 GPa can plausibly be explained by underestimated ablation-plasma x-ray heating, with the magnitude of this heating increasing with laser irradiance. These results constitute the highest‐stress structural determination for Ta, the first L -edge EXAFS thermometry in ramp and shock‐ramp experiments, and a stringent benchmark of hydrodynamic models. They validate L ‐edge EXAFS as a robust platform for thermometry in dynamic compression and underscore the need for careful ablator design in future high‐pressure studies.

Polymers are widely used in high energy density (HED) experiments, but rheological properties, such as viscosity and strength, are often assumed negligible in modeling despite limited experimental validation. We report initial measurements of rippled reflecting shocks in epoxy using the Sakharov shock perturbation decay technique supported by analytical formulation from Miller and Ahrens [Rev. Mod. Phys. 63(4), 919 (1991)]. Experiments at the Jupiter Laser Facility employed drive beams delivering a 10 ns, 800 J pulse across an ∼600 μm spot, launching a shock above 400 GPa into epoxy. The highly reflective shock in the epoxy sample was diagnosed using velocimetry and optical pyrometry. Velocimetry showed strong reflectivity and evidence of perturbation structure and streaked optical pyrometry clearly captured spatial evolution of the perturbed shock and showed amplitude growth, decay, and phase inversion, in agreement with hydrodynamic simulations using ARES. Our demonstration of technical viability and the observation of rippled reflecting shocks in epoxy establish a path toward future quantitative constraints on polymer rheology in HED experiments.

Iron (Fe) is a primary constituent of terrestrial planetary cores, yet its rheological properties under extreme conditions remain uncertain. Here we present direct measurements of Fe strength at 310-430 GPa pressures and 3700-5800 K temperatures, obtained using Rayleigh-Taylor (RT) instability experiments at the National Ignition Facility. Single-crystal α-Fe samples with [001] and [111] orientations are shock-ramp compressed past the α-ε transition along paths approaching Earth’s inner core conditions. We find that ε-Fe derived from [001] α-Fe is consistently stronger (11-20 GPa) than that from [111] α-Fe (8-18 GPa), contrary to the trend at ambient conditions. Large-scale molecular dynamics simulations reproduce this atypical strength anisotropy and attribute it to microstructural evolution during the phase transition and subsequent ε-phase plasticity. Ripple growth analysis further constrains viscosities of 100-170 Pa·s under the driven conditions. Our results provide experimental benchmarks for Fe rheology at inner-core conditions, with implications for seismic anisotropy and the geodynamo.

The high-pressure strength of solid platinum is studied at the National Ignition Facility via Rayleigh-Taylor ripple growth under ramp compression. Laser-driven experiments reached pressures up to 430 GPa, collecting velocimetry and radiography data. Despite no phase transformation, the observed ripple growth aligns with hydrodynamic simulations using an amplified Steinberg-Guinan model, resulting in a 200-fold increase in strength. Molecular dynamics simulations of platinum ramp compression yield similar von Mises stress at comparable high pressure and high strain rate conditions. These findings represent the highest-pressure strength measurements ever achieved for platinum and offer critical insight into its significant strengthening behavior under high pressure and strain rate conditions.

High-energy-density laser facilities and advances in dynamic compression techniques have expanded access to material states in the Terapascal regime relevant to inertial confinement fusion, planetary science, and geophysics. However, experimentally determining the material temperature in these extreme conditions has remained a difficult challenge. Extended X-ray Absorption Fine Structure (EXAFS), referring to the modulations in x-ray absorption above an absorption edge from photoelectrons’ interactions with neighboring atoms, has proven to be a versatile and robust technique for probing material temperature and density for mid-to-high Z elements under dynamic compression. The current platform at the National Ignition Facility has developed six configurations for EXAFS measurements between 7 and 18 keV for different absorption edges (Fe K, Co K, Cu K, Ta L3, Pb L3, and Zr K) using a curved-crystal spectrometer and a bright, continuum foil x-ray source. In this work, we describe the platform geometry, x-ray source performance, spectrometer resolution and throughput, design considerations, and data in ambient and dynamic-compression conditions.

We present results from x-ray imaging of high-aspect-ratio magnetic reconnection experiments driven at the National Ignition Facility. Two parallel, self-magnetized, elongated laser-driven plumes are produced by tiling 40 laser beams. A magnetic reconnection layer is formed by the collision of the plumes. A gated x-ray framing pinhole camera with micro-channel plate detector produces multiple images through various filters of the formation and evolution of both the plumes and current sheet. As the diagnostic integrates plasma self-emission along the line of sight, two-dimensional electron temperature maps ⟨Te⟩Y are constructed by taking the ratio of intensity of these images obtained with different filters. The plumes have a characteristic temperature ⟨Te⟩Y=240 ± 20 eV at 2 ns after the initial laser irradiation and exhibit a slow cooling up to 4 ns. The reconnection layer forms at 3 ns with a temperature ⟨Te⟩Y=280 ± 50 eV as the result of the collision of the plumes. The error bars of the plumes and current sheet temperatures separate at 4 ns, showing the heating of the current sheet from colder inflows. Using a semi-analytical model, we survey various heating mechanisms in the current sheet. We find that reconnection energy conversion would dominate at low density (ne≲7×1018 cm−3) and electron-ion collisional drag at high-density (≳1019 cm−3).

Ejecta microjets offer an experimental methodology to study high-speed particle laden-flow interactions, as microjets consist of millions of particulates traveling at velocities of several kilometers per second and are easily generated by most common shock drives. Previous experiments on the OMEGA Extended Performance laser found that collisions between two counter-propagating laser-driven tin ejecta microjets varied as a function of drive pressure; jets generated near shock pressures of 10 GPa passed through each other without interacting, whereas jets generated at shock pressures of over 100 GPa interacted strongly, forming a cloud around the center interaction point. In this paper, we present a more systematic scan of tin ejecta microjet collisions over intermediate pressure regimes to identify how and at what shock pressure interaction behavior onsets. Radiographs of interacting microjets at five different laser drive energies qualitatively demonstrate that interaction behavior onsets slowly as a function of laser drive energy. Quantitative mass and density metrics from each radiograph provide trends on jet characteristics and collisional mass dispersion. It is observed that jetting mass, jet densities, and mass dispersion increase with increasing drive pressures and that the increased jet density at the higher drive energies may account for the increased mass dispersion. This work provides an important step in the understanding of tin ejecta microjet collisions and paves the way for future studies on the physics dominating high-speed particle-laden flow interactions.

Fast analysis of collective Thomson scattering ion acoustic wave features using a deep convolutional neural network model is presented. The network was trained from spectra to predict the plasma parameters, including ion velocities, population fractions, and ion and electron temperatures. A fully kinetic particle-in-cell simulation was used to model a laboratory astrophysics experiment and simulate a diagnostic image of the ion acoustic wave feature. Network predictions were compared with Bayesian inference of the plasma model parameters for both the simulated and experimentally measured images. Both approaches were fairly accurate predicting the simulated image and the network predictions matched a good portion of the Bayesian results for the experimentally measured image. The Bayesian approach is more robust to noise and motivates future work to train deep learning models with realistic noise. The advantage of the deep learning model is making thousands of predictions in a few hundred milliseconds, compared to a few seconds to minutes per prediction for the optimization and Bayesian approaches presented here. The results demonstrate promising capabilities of deep learning models to analyze Thomson data orders of magnitude faster than conventional methods when using the neural network for standalone analysis. If more rigorous analysis is needed, neural network predictions can be used to quickly initialize other optimization methods and increase chances of success. This is especially useful when the dataset becomes very large or highly dimensional and manually refining initial conditions for the entire dataset are no longer tractable.

Recent experiments of laser-driven ejecta microjets performed at OMEGA 60 reveal tortuous jets whereby the jets appear to deviate from their initial trajectory as they travel in vacuum. To understand these data, we perform two dimensional numerical simulations, considering different target thicknesses, pressures, and models of the drive conditions. In particular, modeling the finite laser spot size appears essential in reproducing qualitatively the non-planar shock observed in the experiment. Simulations capture jet deflection by accounting for a slight misalignment of the laser pointing with respect to the groove axis along with spatial variation of the laser pulse intensity. The principal physical mechanism appears to be that lateral momentum is imparted by release waves arising from the non-planar drive. The induced off-axis velocity is small in comparison to the jet axial velocity but integrates into a pronounced deflection over the course of the experiment. The analysis of jet axial and lateral mass distributions is found to be reproduced reasonably by the simulations. Simulated radiographs are in qualitative agreement with the experiments, though their differences point to potential shortcomings in modeling strictly three-dimensional experiments using two-dimensional hydrodynamic simulations. The simple analysis is able to explain part of the observed discrepancy in simulated vs experimental jet masses.

Proton imaging has become a key diagnostic for measuring electromagnetic fields in high-energy-density (HED) laboratory plasmas. Compared to other techniques for diagnosing fields, proton imaging is a measurement that can simultaneously offer high spatial and temporal resolution and the ability to distinguish between electric and magnetic fields without the protons perturbing the plasma of interest. Consequently, proton imaging has been used in a wide range of HED experiments, from inertial-confinement fusion to laboratory astrophysics. An overview is provided on the state of the art of proton imaging, including a discussion of experimental considerations like proton sources and detectors, the theory of proton-imaging analysis, and a survey of experimental results demonstrating the breadth of applications. Topics at the frontiers of proton-imaging development are also described, along with an outlook on the future of the field.