Lizhi Du
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lizhi Du has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
Xinmin Hu
Jilin University
8 shared publicationsYong Wang
Jilin University
6 shared publicationsChenyang Liu
College of Construction Engineering, Jilin University, Changchun, China
5 shared publicationsXiaopei Zhang
College of Construction Engineering, Jilin University, Changchun, China
5 shared publicationsYalu Han
College of Construction Engineering, Jilin University, Changchun, China
5 shared publicationsYanlong Wang
Design and Research Co., Ltd
3 shared publications
Latest Publications
- 5 June 2025
- Published by Springer Nature
- p. 751-756
Detection Methods and Applications of Concrete Void Areas Based on Elastic Wave Characteristics
- 5 June 2025
- Published by Springer Nature
- p. 751-756
Detection Methods and Applications of Concrete Void Areas Based on Elastic Wave Characteristics
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-13
Geological Survey of Urban Roadbeds Utilizing Rapid Detection System Based on Transient Electromagnetic Method
Urban road foundation disasters pose a significant threat to human life and property, underscoring the need for efficient, precise non-destructive testing methods. This study introduces a rapid, real-time remote detection system based on transient electromagnetic methods (rTEM), capable of collecting data at 5 km/h with integrated real-time data transmission and synchronous imaging. Based on this detection system, we propose a data processing workflow using Deep Denoising Autoencoder and Iterative Reweighted Least Squares (DDAE-IRLS). This method enables the automatic screening and reconstruction of data affected by interference, allowing the detection system to operate without disrupting normal traffic. The system’s effectiveness is demonstrated through two case studies: one in topographically varied areas with shallow bedrock, where it accurately mapped soil layer structures and granite weathering beneath road foundations, evidenced by borehole data; and another in flat terrains, assessing groundwater threats in subway construction zones. These applications highlight the rTEM system’s potential in urban geological investigations, particularly in detecting varied road foundation conditions and assessing groundwater-related risks. This study provides valuable references for geological testing and monitoring of road foundations in highly urbanized areas.
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Geoscience and Remote Sensing
- Vol. 62 (01962892) , 1-13
Geological Survey of Urban Roadbeds Utilizing Rapid Detection System Based on Transient Electromagnetic Method
Urban road foundation disasters pose a significant threat to human life and property, underscoring the need for efficient, precise non-destructive testing methods. This study introduces a rapid, real-time remote detection system based on transient electromagnetic methods (rTEM), capable of collecting data at 5 km/h with integrated real-time data transmission and synchronous imaging. Based on this detection system, we propose a data processing workflow using Deep Denoising Autoencoder and Iterative Reweighted Least Squares (DDAE-IRLS). This method enables the automatic screening and reconstruction of data affected by interference, allowing the detection system to operate without disrupting normal traffic. The system’s effectiveness is demonstrated through two case studies: one in topographically varied areas with shallow bedrock, where it accurately mapped soil layer structures and granite weathering beneath road foundations, evidenced by borehole data; and another in flat terrains, assessing groundwater threats in subway construction zones. These applications highlight the rTEM system’s potential in urban geological investigations, particularly in detecting varied road foundation conditions and assessing groundwater-related risks. This study provides valuable references for geological testing and monitoring of road foundations in highly urbanized areas.
- Open Access
- 1 December 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2651 (1) , 012079
Application of Impact Elastic Wave Method in Quality Inspection of Concrete Lining
As the main part of inter-basin water transfer project, water tunnel plays an important role in long-distance water conveyance. In water tunnel, the lining quality problem is one of the important potential safety hazards of the tunnel engineering. It is very necessary to detect the internal defects of concrete lining. In this paper, a multi-parameter comprehensive interpretation method based on impact elastic wave is proposed to quickly detect the internal defects of lining. The common offset time domain analysis method, frequency domain analysis method and two-dimension Rayleigh wave method are used for data processing. The detection method has the characteristics of single data acquisition and multi-parameter joint interpretation. The physical model of concrete lining is tested and compared with the result of GPR method to verify the accuracy of this method. The coring results show the reliability and stability of this method in practical application.
- 1 December 2023
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2651 (1) , 012079
Open AccessApplication of Impact Elastic Wave Method in Quality Inspection of Concrete Lining
As the main part of inter-basin water transfer project, water tunnel plays an important role in long-distance water conveyance. In water tunnel, the lining quality problem is one of the important potential safety hazards of the tunnel engineering. It is very necessary to detect the internal defects of concrete lining. In this paper, a multi-parameter comprehensive interpretation method based on impact elastic wave is proposed to quickly detect the internal defects of lining. The common offset time domain analysis method, frequency domain analysis method and two-dimension Rayleigh wave method are used for data processing. The detection method has the characteristics of single data acquisition and multi-parameter joint interpretation. The physical model of concrete lining is tested and compared with the result of GPR method to verify the accuracy of this method. The coring results show the reliability and stability of this method in practical application.
- Open Access
- 30 November 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (11) , e0289184
Study on the shielding effect of low resistance body when using transient electromagnetic to detect urban underground space
Transient electromagnetic Method (TEM) is an efficient geophysical detection technology suitable for detection of urban near-surface space. However, its detection results are well affected by the low resistance anomaly, which interferes with the interpretation of the inversion results. This article used finite element method to simulate the entire process of urban underground pipeline under TEM detection. The causes of interference and the degree of interference under different working conditions were analyzed. The results demonstrate that low resistance anomaly in magnetic field will caused electromagnetic energy absorption and resulting eddy current losses, which lead to a distortion of the primary magnetic field in the vicinity of the pipeline, and formation of a weak field zone beneath the pipeline. The size and shape of the shielding zone are affected by burial depth, transmitter coil diameter, and anomaly size. When the burial depth exceeds 10 times the diameter of the coil or pipeline, the shielding range stabilizes at 1.5–2 times the pipeline’s transverse diameter. Moreover, when the pipeline’s transverse diameter exceeds twice the transmitter coil diameter, the weak field zone beneath the pipeline will transform into a strong field zone, this is due to the refractive and reflective effects of the electromagnetic field. Finally, experiments were conducted and the inverted results was found to be larger than the actual pipeline diameter, with an error margin similar to that explained by the simulation. These results have implications for high accuracy detecting underground pipelines in urban areas.
- 30 November 2023
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 18 (11) , e0289184
Open AccessStudy on the shielding effect of low resistance body when using transient electromagnetic to detect urban underground space
Transient electromagnetic Method (TEM) is an efficient geophysical detection technology suitable for detection of urban near-surface space. However, its detection results are well affected by the low resistance anomaly, which interferes with the interpretation of the inversion results. This article used finite element method to simulate the entire process of urban underground pipeline under TEM detection. The causes of interference and the degree of interference under different working conditions were analyzed. The results demonstrate that low resistance anomaly in magnetic field will caused electromagnetic energy absorption and resulting eddy current losses, which lead to a distortion of the primary magnetic field in the vicinity of the pipeline, and formation of a weak field zone beneath the pipeline. The size and shape of the shielding zone are affected by burial depth, transmitter coil diameter, and anomaly size. When the burial depth exceeds 10 times the diameter of the coil or pipeline, the shielding range stabilizes at 1.5–2 times the pipeline’s transverse diameter. Moreover, when the pipeline’s transverse diameter exceeds twice the transmitter coil diameter, the weak field zone beneath the pipeline will transform into a strong field zone, this is due to the refractive and reflective effects of the electromagnetic field. Finally, experiments were conducted and the inverted results was found to be larger than the actual pipeline diameter, with an error margin similar to that explained by the simulation. These results have implications for high accuracy detecting underground pipelines in urban areas.
- Open Access
- 28 November 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-12
Experiment on monitoring leakage of landfill leachate by parallel potentiometric monitoring method
The accumulation of municipal solid waste (MSW) in landfills often becomes a serious pollution source of geological environment and groundwater. The geological environment is the carrier of the landfill, and also the main pollution object of the landfill. The main pollution modes of the landfill site to the surrounding geological environment are purging, flushing, leachate, etc. If the leachate leakage cannot be found and repaired in time, it will cause serious harm to the geological environment and groundwater. The cost of geological environment and groundwater sampling through borehole surveys is high. Therefore, monitoring the seepage path and migration law of leachate is of great significance for determining the pollution range of the landfill site. In this study, by adjusting the grids of different sizes and changing the flow rate of leachate, the monitoring of fluid migration of different types of leachate was strengthened. The results show that the parallel potential monitoring method can quickly reflect the location and number of leachate points and the migration law of leachate. It provides effective reference data for landfill leachate monitoring.
- 28 November 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-12
Open AccessExperiment on monitoring leakage of landfill leachate by parallel potentiometric monitoring method
The accumulation of municipal solid waste (MSW) in landfills often becomes a serious pollution source of geological environment and groundwater. The geological environment is the carrier of the landfill, and also the main pollution object of the landfill. The main pollution modes of the landfill site to the surrounding geological environment are purging, flushing, leachate, etc. If the leachate leakage cannot be found and repaired in time, it will cause serious harm to the geological environment and groundwater. The cost of geological environment and groundwater sampling through borehole surveys is high. Therefore, monitoring the seepage path and migration law of leachate is of great significance for determining the pollution range of the landfill site. In this study, by adjusting the grids of different sizes and changing the flow rate of leachate, the monitoring of fluid migration of different types of leachate was strengthened. The results show that the parallel potential monitoring method can quickly reflect the location and number of leachate points and the migration law of leachate. It provides effective reference data for landfill leachate monitoring.
- Open Access
- 17 November 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-15
Multi-factor settlement prediction around foundation pit based on SSA-gradient descent model
With the rise of machine learning, a lot of excellent algorithms are used for settlement prediction. Backpropagation (BP) and Elman are two typical algorithms based on gradient descent, but their performance is greatly affected by the random selection of initial weights and thresholds, so this paper chooses Sparrow Search Algorithm (SSA) to build joint model. Then, two sets of land subsidence monitoring data generated during the excavation of a foundation pit in South China are used for analysis and verification. The results show that the optimization effect of SSA on the gradient descent model is remarkable and the stability of the model is improved to a certain extent. After that, SSA is compared with GA and PSO algorithms, and the comparison shows that SSA has higher optimization efficiency. Finally, select SSA-KELM, SSA-LSSVM and SSA-BP for further comparison and it proves that the optimization efficiency of SSA for BP is higher than other kind of neural network. At the same time, it also shows that the seven influencing factors selected in this paper are feasible as the input variables of the model, which is consistent with the conclusion drawn by the grey relational analysis.
- 17 November 2022
- Published by Springer Nature in Scientific Reports
- Vol. 12 (1) , 1-15
Open AccessMulti-factor settlement prediction around foundation pit based on SSA-gradient descent model
With the rise of machine learning, a lot of excellent algorithms are used for settlement prediction. Backpropagation (BP) and Elman are two typical algorithms based on gradient descent, but their performance is greatly affected by the random selection of initial weights and thresholds, so this paper chooses Sparrow Search Algorithm (SSA) to build joint model. Then, two sets of land subsidence monitoring data generated during the excavation of a foundation pit in South China are used for analysis and verification. The results show that the optimization effect of SSA on the gradient descent model is remarkable and the stability of the model is improved to a certain extent. After that, SSA is compared with GA and PSO algorithms, and the comparison shows that SSA has higher optimization efficiency. Finally, select SSA-KELM, SSA-LSSVM and SSA-BP for further comparison and it proves that the optimization efficiency of SSA for BP is higher than other kind of neural network. At the same time, it also shows that the seven influencing factors selected in this paper are feasible as the input variables of the model, which is consistent with the conclusion drawn by the grey relational analysis.
- 16 August 2022
- Published by Springer Nature in Journal of Soils and Sediments
- Vol. 23 (1) , 288-298
Study on thermal conductivity of non-aqueous phase liquids-contaminated soils
- 16 August 2022
- Published by Springer Nature in Journal of Soils and Sediments
- Vol. 23 (1) , 288-298
Study on thermal conductivity of non-aqueous phase liquids-contaminated soils
- 13 August 2022
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 81 (16) , 1-15
Application of regularized ELM optimized by sine algorithm in prediction of ground settlement around foundation pit
- 13 August 2022
- Published by Springer Nature in Environmental Earth Sciences
- Vol. 81 (16) , 1-15
Application of regularized ELM optimized by sine algorithm in prediction of ground settlement around foundation pit
- Open Access
- 24 November 2021
- Published by GeoScienceWorld in Lithosphere
- Vol. 2021 (Special 4)
A New Rock Brittleness Evaluation Method Based on the Complete Stress-Strain Curve
Brittleness is a crucial parameter of rock mass and the key indicator in rock engineerings, such as rockburst prediction, tunnelling machine borehole drilling, and hydraulic fracturing. To solve the problem of using present brittleness indexes, the existing rock brittleness indexes were firstly summarised in this paper. Then, a brittleness index ( ), which considers the ratio of stress drop rate and stress increase rate and the peak stress, was proposed. This new index has the advantage of simplifying the acquisition of key parameters and avoiding dimensional problems, as well as taking the complete stress-strain curves into account. While applying the , the peak strain is used to describe the difficulty of brittle failure before the peak point, and the ratio of stress drop to strain increase can reflect the stress drop rate without dimension problem. In order to verify the applicability of , through the PFC2D, the microparameters and confining pressure were changed to model different types of rock numerical specimens and different stress condition. The results show that the can well reflect and classify the brittleness characteristics of different rock types and characterise the constraint of confining pressure on rock brittleness. Moreover, the influence of microparameter on macroparameter was studied. In order to further verify the reliability of the brittleness index ( ), this study conducted uniaxial and triaxial compression tests (30 MPa) on marble, sandstone, limestone, and granite under different confining pressure.- 24 November 2021
- Published by GeoScienceWorld in Lithosphere
- Vol. 2021 (Special 4)
Open AccessA New Rock Brittleness Evaluation Method Based on the Complete Stress-Strain Curve
Brittleness is a crucial parameter of rock mass and the key indicator in rock engineerings, such as rockburst prediction, tunnelling machine borehole drilling, and hydraulic fracturing. To solve the problem of using present brittleness indexes, the existing rock brittleness indexes were firstly summarised in this paper. Then, a brittleness index ( ), which considers the ratio of stress drop rate and stress increase rate and the peak stress, was proposed. This new index has the advantage of simplifying the acquisition of key parameters and avoiding dimensional problems, as well as taking the complete stress-strain curves into account. While applying the , the peak strain is used to describe the difficulty of brittle failure before the peak point, and the ratio of stress drop to strain increase can reflect the stress drop rate without dimension problem. In order to verify the applicability of , through the PFC2D, the microparameters and confining pressure were changed to model different types of rock numerical specimens and different stress condition. The results show that the can well reflect and classify the brittleness characteristics of different rock types and characterise the constraint of confining pressure on rock brittleness. Moreover, the influence of microparameter on macroparameter was studied. In order to further verify the reliability of the brittleness index ( ), this study conducted uniaxial and triaxial compression tests (30 MPa) on marble, sandstone, limestone, and granite under different confining pressure. - Open Access
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 660 (1) , 012116
Application of Three-Dimensional Electrical Resistivity Tomography in Archeological Prospection
As the important part of historical relics, ancient architectural sites contain an amount of cultural information, which are of great significance for the future development of mankind. But improper prospection methods will lead irreversible damage to the existing architectural sites. Therefore, appropriate detection methods have significant meaning in archeological prospection and cultural relic protection. At present, there are many methods to explore ancient architectural sites, among which three-dimensional electrical resistivity tomography (ERT) methods are gradually popularized, because of its advantages of non-destructive, high efficiency, economic and deep prospection. But there are too many electrode arrays, such as Wenner array, Schlumberger array, dipole-dipole array and pole-pole array. First, this paper briefly introduces the application status of ERT. Then, a simple geoelectric model is constructed, and the inversion results are obtained with different arrays. The comparison of the inversion results for 4 electrode arrays shows that the dipole-dipole array gives the highest resolution. And, a more complex geoelectric model is constructed and compared with the results of the inversion. The results show that conclusions have a good consistency. And, this paper shows that Wenner method and Schlumberger array have high resolution in archeological prospection.
- 1 February 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 660 (1) , 012116
Open AccessApplication of Three-Dimensional Electrical Resistivity Tomography in Archeological Prospection
As the important part of historical relics, ancient architectural sites contain an amount of cultural information, which are of great significance for the future development of mankind. But improper prospection methods will lead irreversible damage to the existing architectural sites. Therefore, appropriate detection methods have significant meaning in archeological prospection and cultural relic protection. At present, there are many methods to explore ancient architectural sites, among which three-dimensional electrical resistivity tomography (ERT) methods are gradually popularized, because of its advantages of non-destructive, high efficiency, economic and deep prospection. But there are too many electrode arrays, such as Wenner array, Schlumberger array, dipole-dipole array and pole-pole array. First, this paper briefly introduces the application status of ERT. Then, a simple geoelectric model is constructed, and the inversion results are obtained with different arrays. The comparison of the inversion results for 4 electrode arrays shows that the dipole-dipole array gives the highest resolution. And, a more complex geoelectric model is constructed and compared with the results of the inversion. The results show that conclusions have a good consistency. And, this paper shows that Wenner method and Schlumberger array have high resolution in archeological prospection.