MPMasoud Pourgholam-Amiji

Masoud Pourgholam-Amiji

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Masoud Pourgholam-Amiji has a total of 15 co-authors. Here are the top co-authors by number of shared publications:

  • Omid Bozorg-Haddad

    Department of Irrigation & Reclamation Engineering, Faculty of Agricultural Engineering & Technology, College of Agriculture & Natural Resources, University of Tehran, Karaj, Tehran, Iran

    2 shared publications
  • Abdolmajid Liaghat

    Department of Irrigation and Reclamation Engineering, Faculty of Agriculture Engineering and Technology, College of Agriculture and Natural Resources, University of Tehran, P.O. Box 4111, 31587-77871 Karaj, Iran

    1 shared publication
  • Abdolmajid Liaghat

    University of Tehran, Karaj, Iran

    1 shared publication
  • Ali Arefinia

    Department of Irrigation and Reclamation Engineering, Faculty of Agricultural Engineering and Technology, College of Agriculture and Natural Resources, University of Tehran, Karaj, Tehran, Iran

    1 shared publication
  • Babak Zolghadr-Asli

    Univ. of Queensland

    1 shared publication
  • Hazi Mohammad Azamathulla

    Department of Civil and Environmental Engineering, Faculty of Engineering, The University of the West Indies, St. Augustine Campus, St Augustine, Trinidad and Tobago

    1 shared publication

Latest Publications

  • Open Access

    A novel early stage drip irrigation system cost estimation model based on management and environmental variables

    by Masoud Pourgholam-Amiji, Khaled Ahmadaali, Abdolmajid Liaghat

    One of the most significant, intricate, and little-discussed aspects of pressurized irrigation is cost estimation. This study attempts to model the early-stage cost of the drip irrigation system using a database of 515 projects divided into four sections the cost of the pumping station and central control system (TCP), the cost of on-farm equipment (TCF), the cost of installation and operation on-farm and pumping station (TCI), and the total cost (TCT). First, 39 environmental and management features affecting the cost of the listed sectors were extracted for each of the 515 projects previously mentioned. A database (a matrix of 515 × 43) was created, and the costs of all projects were updated for the baseline year of 2022. Then, several feature selection algorithms, such as WCC, LCA, GA, PSO, ACO, ICA, LA, HTS, FOA, DSOS, and CUK, were employed to choose the most significant features that had the biggest influence on the system cost. The selection of features was carried out for all features (a total of 39 features) as well as for easily available features (those features that existed before the irrigation system’s design phase, 18 features). Then, different machine learning models such as Multivariate Linear Regression, Support Vector Regression, Artificial Neural Networks, Gene Expression Programming, Genetic Algorithms, Deep Learning, and Decision Trees, were used to estimate the costs of each of the of the aforementioned sections. Support vector machine (SVM) and optimization algorithms (Wrapper) were found to be the best learner and feature selection techniques, respectively, out of all the available feature selection algorithms. The two LCA and FOA algorithms produced the best estimation, according to the evaluation criteria results. Their RMSE for all features was 0.0020 and 0.0018, respectively, and their R2 was 0.94 and 0.94. For readily available features, these criteria were 0.0006 and 0.95 for both algorithms. In the part of the overall feature, the early-stage cost modeling with selected features revealed that the SVM model (with RBF Kernel) is the best model among the four cost sections discussed. Its evaluation criteria in the training stage are R2 = 0.923, RMSE = 0.008, and VE = 0.082; in the testing stage, they are R2 = 0.893, RMSE = 0.009, and VE = 0.102. The ANN model (MLP) was found to be the best model for a subset of features in the easily available feature part, with R2 = 0.912, RMSE = 0.008, and VE = 0.083 in the training stage and R2 = 0.882, RMSE = 0.009, and VE = 0.103 in the testing stage. The findings of this study can be utilized to highly accurately estimate the cost of local irrigation systems based on the recognized environmental and management parameters and by employing particular models.


  • Estimating the riverine environmental water demand under climate change with data mining models

    by Masoud Zanjani, Omid Bozorg-Haddad, Mustafa Zanjani, Ali Arefinia, Masoud Pourgholam-Amiji, Hugo A. Loáiciga


  • Open Access

    Review of: "Yield Forecasting Model for Maize Using Satellite Multispectral Imagery Driven Vegetation Indices"

    by Masoud Pourgholam-Amiji

    I thoroughly read the article written by the authors and found that they did well. It is new work and it has innovation. The research method and the results of this research were interesting, and I recommend reading it. However, there are drawbacks t...

  • Decision Tree (DT): A Valuable Tool for Water Resources Engineering

    by Maedeh Enayati, Omid Bozorg-Haddad, Masoud Pourgholam-Amiji, Babak Zolghadr-Asli, Mohsen Tahmasebi Nasab


  • Open Access

    Investigation of Salt Concentration Fluctuations of Paddy Fields in Underground Drainage Conditions and Application of Applied Management Scenarios Using Drainmod-S Model

    by M. Masoomi, M. Pourgholam-Amiji, M. Parsinejad

    In this study, the Drainmod-S model was used to vary soil salt concentration and the effect of underground drainage on the amount of leaching in a physical model (large lysimeter). A soil extractor was installed at depths of 40, 50, and 70 cm at a distance of 35 cm from the drainage to ...

  • Open Access

    Improving rice water productivity using alternative irrigation (case study: north of Iran)

    by Masoud Pourgholam-Amiji, Abdolmajid Liaghat, Mojtaba Khoshravesh, Hazi Mohammad Azamathulla

    Increasing population and the need for more food has made forces on water resources due to crop productions. One of the strategies for preventing the overuses of safe water resources for agriculture is to increase agricultural productivity by reducing the amount of irrigation water with a slight reduction or even maintaining the yields. Rice production in the northern region of Iran which is strategically and economically very important, requires irrigation management changing with traditional irrigation methods (flood irrigation). This study was conducted in 2017–2018 crop season to investigate the effect of different irrigation management on water consumption, rice yield and water productivity in paddy field of Babolsar, Mazandaran, Iran. The experiment was performed in the field in a randomized complete block design with three replicates and four treatments in 12 plots. The treatments were TI (Traditional/flood Irrigation), AI1, AI3 and AI5 (Alternative Irrigation one, three and five days after the disappearance of water from the soil surface, respectively). The number of yield components and the water productivity indexes were determined. The results of this study showed a significant difference (at 1% level) between irrigation treatments in terms of yield components including tiller number, Panicle length, filling percentage, and water productivity, but they did not have any significant effect on plant height and grain yield. The applied irrigation water for TI, AI1, AI3, and AI5 treatments was measured to be 7,940, 4,910, 4,090 and 3,290 m3/ha, respectively. The maximum yield (6.11 ton/ha) belonged to TI treatment and after that with the value of 6.02 ton/ha was belong to AI5 treatment with the least application of water. Rice water productivities for TI, AI1, AI3, and AI5 treatments were calculated to be 0.82, 1.05, 1.38 and 1.83 kg/m3, respectively. Therefore, alternate irrigation five days after the disappearance of surface water (AI5) was accepted to be the best irrigation practices among the other different irrigation management due to 56.07% reduction in water use and only 1.47% reduction in grain yield compared to control treatment.