Jeong-Ung Yoo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jeong-Ung Yoo has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Hae-Won Son
Division of Electronic Engineering, Jeonbuk National University, Jeonju, Jeollabuk-do, South Korea
4 shared publications - Donggu Im
Division of Electronic Engineering, Jeonbuk National University, Jeonju, Jeollabuk-do, South Korea
2 shared publications - Jung-Mu Kim
Division of Electronic Engineering Jeonbuk National University Jeonju Korea
2 shared publications Gyeore Lee
Division of Electronic Engineering, Jeonbuk National University, Jeonju, Jeollabuk-do, South Korea
1 shared publicationSeunghyun Park
CTech, Daejeon, South Korea
1 shared publication- Wooyeol Choi
Seoul National University
1 shared publication
Latest Publications
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- p. 1-14
A Handgrip-Responsive mmWave Phased Array Antenna-PA Module With Antenna-Based Capacitive Sensor for EIRP Recovery via Adaptive Current Redistribution
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- p. 1-14
A Handgrip-Responsive mmWave Phased Array Antenna-PA Module With Antenna-Based Capacitive Sensor for EIRP Recovery via Adaptive Current Redistribution
- Open Access
- 2 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 106770-106780
Dual-Polarized Patch Antenna Array Integrated With Capacitive Proximity Sensor for 5G Millimeter-Wave Smartphones
We present a novel concept of a millimeter-wave patch antenna that integrates the functions of a dual-polarized antenna and a capacitive proximity sensor to detect the state of a hand grip on a smartphone and compensate for the effect. The antenna has a dual-polarized, proximity-coupled, square patch structure, and acts as a proximity sensor by utilizing the change in capacitance of the patch when the user’s hand approaches. By observing the change in capacitance at the center of a square patch operating in two fundamental TM modes, antenna and sensor functions can be performed concurrently and without mutual interference. The antenna is designed using a low-cost four-layer FR-4 substrate and fabricated using a cost-effective standard printed circuit board (PCB) process. The antenna is configured as a 1 × 8 array, and after mounting it on a smartphone model, the gain, beam steering performance, and change in capacitance according to hand proximity are predicted and measured. The peak gain measured at 28 GHz exceeds 11.8 dBi, with a gain variation of less than 2.2 dB within the 5G n257 band (26.5-29.5 GHz). The measured capacitance change due to hand proximity is 130 fF, which is sufficient for real-time detection of the hand grip state. An example of improvement in the gain of the proposed antenna by detecting the hand grip state is presented through a simulation.
- 2 August 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 106770-106780
Open AccessDual-Polarized Patch Antenna Array Integrated With Capacitive Proximity Sensor for 5G Millimeter-Wave Smartphones
We present a novel concept of a millimeter-wave patch antenna that integrates the functions of a dual-polarized antenna and a capacitive proximity sensor to detect the state of a hand grip on a smartphone and compensate for the effect. The antenna has a dual-polarized, proximity-coupled, square patch structure, and acts as a proximity sensor by utilizing the change in capacitance of the patch when the user’s hand approaches. By observing the change in capacitance at the center of a square patch operating in two fundamental TM modes, antenna and sensor functions can be performed concurrently and without mutual interference. The antenna is designed using a low-cost four-layer FR-4 substrate and fabricated using a cost-effective standard printed circuit board (PCB) process. The antenna is configured as a 1 × 8 array, and after mounting it on a smartphone model, the gain, beam steering performance, and change in capacitance according to hand proximity are predicted and measured. The peak gain measured at 28 GHz exceeds 11.8 dBi, with a gain variation of less than 2.2 dB within the 5G n257 band (26.5-29.5 GHz). The measured capacitance change due to hand proximity is 130 fF, which is sufficient for real-time detection of the hand grip state. An example of improvement in the gain of the proposed antenna by detecting the hand grip state is presented through a simulation.
- Open Access
- 31 January 2022
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 33 (1) , 20-27
Uniform Circular Array Antenna with Simple Feeding Structure for Dual-Mode OAM Communication
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 31 January 2022
- Published by Korean Institute of Electromagnetic Engineering and Science in The Journal of Korean Institute of Electromagnetic Engineering and Science
- Vol. 33 (1) , 20-27
Open AccessUniform Circular Array Antenna with Simple Feeding Structure for Dual-Mode OAM Communication
한국전자파학회논문지 (The Journal of Korean Institute of Electromagnetic Engineering and Science)
- 3 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (12) , 2038-2042
A Simple Compact Wideband Microstrip Antenna Consisting of Three Staggered Patches
This letter proposes a simple compact microstrip antenna with enhanced bandwidth. The antenna is composed of three narrow rectangular patches: one middle patch and two side patches. The side patches are staggered longitudinally with respect to the middle patch and connected using short strips. The antenna is printed on a thin single-layer dielectric substrate with a ground plane and fed by a coaxial probe at the center of the middle patch. By staggering the side patches with respect to the middle patch, two resonant modes are excited at two close frequencies and a wide bandwidth is obtained. The antenna has a compact size of 0.310 0.290 0.0270 (where 0 is the center operating wavelength in the free space) and a measured impedance bandwidth of 6.8% (return loss > 10 dB), which is approximately 2.3 times wider than that of a conventional square microstrip antenna on the same substrate. The antenna has a stable gain varying from 5.8 to 7.5 dBi and a low cross-polarization level less than 15 dB within the impedance bandwidth. The radiation characteristics are nearly constant over the entire impedance bandwidth.
- 3 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 19 (12) , 2038-2042
A Simple Compact Wideband Microstrip Antenna Consisting of Three Staggered Patches
This letter proposes a simple compact microstrip antenna with enhanced bandwidth. The antenna is composed of three narrow rectangular patches: one middle patch and two side patches. The side patches are staggered longitudinally with respect to the middle patch and connected using short strips. The antenna is printed on a thin single-layer dielectric substrate with a ground plane and fed by a coaxial probe at the center of the middle patch. By staggering the side patches with respect to the middle patch, two resonant modes are excited at two close frequencies and a wide bandwidth is obtained. The antenna has a compact size of 0.310 0.290 0.0270 (where 0 is the center operating wavelength in the free space) and a measured impedance bandwidth of 6.8% (return loss > 10 dB), which is approximately 2.3 times wider than that of a conventional square microstrip antenna on the same substrate. The antenna has a stable gain varying from 5.8 to 7.5 dBi and a low cross-polarization level less than 15 dB within the impedance bandwidth. The radiation characteristics are nearly constant over the entire impedance bandwidth.