Lianying Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lianying Wang has a total of 58 co-authors. Here are the top co-authors by number of shared publications:
David G. Evans
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, P. R. China
5 shared publicationsJing He
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, P. R. China
4 shared publications- Junfeng Liu
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing 100029, China
4 shared publications Shuang Yue
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, P. R. China
3 shared publicationsXiaodi Guo
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, P. R. China
3 shared publicationsXue Duan
State Key Laboratory of Chemical Resource Engineering, Beijing University of Chemical Technology, Beijing, P. R. China
3 shared publications
Latest Publications
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18  (28) , 15037-15043
Co/ZnO/C heterostructured nanowires derived from layered hydroxides: magnetically recyclable photocatalysts for efficient tetracycline degradation
Co 0.1 /ZnO/C nanowires were prepared for tetracycline degradation, exhibiting excellent degradation performance and magnetic recyclability.
- 4 June 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18  (28) , 15037-15043
Co/ZnO/C heterostructured nanowires derived from layered hydroxides: magnetically recyclable photocatalysts for efficient tetracycline degradation
Co 0.1 /ZnO/C nanowires were prepared for tetracycline degradation, exhibiting excellent degradation performance and magnetic recyclability.
- 21 November 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54  (48) , 17921-17931
In situ construction of a Zn 2 SnO 4 /TiO 2 /Ti 3 C 2 T x heterostructured composite allows for rapid sensing of n -hexanol under ultraviolet light illumination
A nano-heterostructured Zn 2 SnO 4 /TiO 2 /Ti 3 C 2 T x composite was prepared with modulated oxygen vacancy concentration to improve its n -hexanol gas sensing performance under UV illumination.
- 21 November 2025
- Published by Royal Society of Chemistry (RSC) in Dalton Transactions
- Vol. 54  (48) , 17921-17931
In situ construction of a Zn 2 SnO 4 /TiO 2 /Ti 3 C 2 T x heterostructured composite allows for rapid sensing of n -hexanol under ultraviolet light illumination
A nano-heterostructured Zn 2 SnO 4 /TiO 2 /Ti 3 C 2 T x composite was prepared with modulated oxygen vacancy concentration to improve its n -hexanol gas sensing performance under UV illumination.
- Open Access
- 1 January 2025
- Published by Innovation Press Co., Limited in The Innovation Materials
- Vol. 3  (3) , 100148-1-100148-9
Encapsulation of Ni nanoparticles in O-doped carbon as chainmail electrocatalyst for alkaline seawater hydrogen evolution
Carbon encapsulation represents a promising strategy for enhancing the activity and stability of the nanocatalysts via the chainmail approach, showing great potential in seawater electrolysis. Herein, a chainmail design is proposed to synthesize nickel nanoparticles protected with an O-doped graphitic shell on carbon nanotubes (Ni@O-C/CNTs) for highly efficient and stable hydrogen evolution reaction (HER) in alkaline seawater. Ni@O-C/CNTs are synthesized by in situ pyrolysis of salicylate intercalated layered nickel hydroxides, forming abundant Ni-O-C bonds at the interface. This chainmail design facilitates the penetration of valence electrons from the active Ni core to the graphitic shell, thereby promoting the adsorption of intermediates involved in HER. Moreover, the enriched O groups on CNTs enhance hydrophilicity and aerophobicity, facilitating electrolyte transport and hydrogen evolution during HER. Owing to the unique chainmail design, Ni@O-C/CNTs exhibit excellent HER performance in real alkaline seawater with a 58 mV overpotential at the current density of 10 mA cm−2 and maintain stability at a current density of 150 mA cm−2 over 2000 hours. Impressively, a high energy efficiency of 80% and stability of up to 300 hours are achieved for the alkaline seawater electrolyzer assembled using Ni@O-C/CNTs under practical conditions.
- 1 January 2025
- Published by Innovation Press Co., Limited in The Innovation Materials
- Vol. 3  (3) , 100148-1-100148-9
Open AccessEncapsulation of Ni nanoparticles in O-doped carbon as chainmail electrocatalyst for alkaline seawater hydrogen evolution
Carbon encapsulation represents a promising strategy for enhancing the activity and stability of the nanocatalysts via the chainmail approach, showing great potential in seawater electrolysis. Herein, a chainmail design is proposed to synthesize nickel nanoparticles protected with an O-doped graphitic shell on carbon nanotubes (Ni@O-C/CNTs) for highly efficient and stable hydrogen evolution reaction (HER) in alkaline seawater. Ni@O-C/CNTs are synthesized by in situ pyrolysis of salicylate intercalated layered nickel hydroxides, forming abundant Ni-O-C bonds at the interface. This chainmail design facilitates the penetration of valence electrons from the active Ni core to the graphitic shell, thereby promoting the adsorption of intermediates involved in HER. Moreover, the enriched O groups on CNTs enhance hydrophilicity and aerophobicity, facilitating electrolyte transport and hydrogen evolution during HER. Owing to the unique chainmail design, Ni@O-C/CNTs exhibit excellent HER performance in real alkaline seawater with a 58 mV overpotential at the current density of 10 mA cm−2 and maintain stability at a current density of 150 mA cm−2 over 2000 hours. Impressively, a high energy efficiency of 80% and stability of up to 300 hours are achieved for the alkaline seawater electrolyzer assembled using Ni@O-C/CNTs under practical conditions.
- Open Access
- 1 June 2024
- Published by Tsinghua University Press in Nano Research
- Vol. 18  (6)
A novel 2D conductive MOF nanobelts for highly efficient electrosynthesis of hydrogen peroxide
Hydrogen peroxide (H2O2) is a crucial industrial chemical that plays an indispensable role in the advancement of human society. Electrochemical methods have recently emerged as one of the most appealing approaches for the green synthesis of H2O2, however, necessitating highly efficient electrocatalysts. Herein, we report the design and successful fabrication of novel two-dimensional conductive metal-organic framework nanobelts, Ni-PTC, composed of pyrene-1,3,6,8-tetracarboxylate (PTCA) as the organic linker and nickel as the metal node for highly efficient electrochemical H2O2 production. These Ni-PTC nanobelts possess abundant exposed active sites and accelerated electronic transfer, which boosts the H2O2 production with a rate of 11.96 mol·g-1·h-1 in a flow cell. An H2O2 solution with a concentration of 24.93 mmol·L-1 is achieved at a current density of 50 mA·cm-2. This work provides a promising approach for practical H2O2 electrosynthesis.
- 1 June 2024
- Published by Tsinghua University Press in Nano Research
- Vol. 18  (6)
Open AccessA novel 2D conductive MOF nanobelts for highly efficient electrosynthesis of hydrogen peroxide
Hydrogen peroxide (H2O2) is a crucial industrial chemical that plays an indispensable role in the advancement of human society. Electrochemical methods have recently emerged as one of the most appealing approaches for the green synthesis of H2O2, however, necessitating highly efficient electrocatalysts. Herein, we report the design and successful fabrication of novel two-dimensional conductive metal-organic framework nanobelts, Ni-PTC, composed of pyrene-1,3,6,8-tetracarboxylate (PTCA) as the organic linker and nickel as the metal node for highly efficient electrochemical H2O2 production. These Ni-PTC nanobelts possess abundant exposed active sites and accelerated electronic transfer, which boosts the H2O2 production with a rate of 11.96 mol·g-1·h-1 in a flow cell. An H2O2 solution with a concentration of 24.93 mmol·L-1 is achieved at a current density of 50 mA·cm-2. This work provides a promising approach for practical H2O2 electrosynthesis.
- Open Access
- 9 August 2022
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3  (19) , 7265-7271
Preparation of C–N co-doped zirconia electrospun nanofibers and their humidity sensing properties
Carbon and nitrogen co-doped ZrO2 (C–N/ZrO2) composites were systematically obtained via an electrospinning approach and a calcination process. The components of C and N were introduced by adding melamine to the electrospinning precursor solution. The effects of C and N doping amount on the morphology and the humidity sensing behavior of C–N/ZrO2 composites were studied. Compared with ZrO2, C–N/ZrO2 with a uniform nanofiber structure exhibits significant improvements in humidity sensing performance, such as fast response (2 s), short recovery time (15 s), negligible hysteresis (0.3195%) and excellent repeatability. The humidity sensing mechanism of the composites was explored. It turns out that the introduction of C and N components into ZrO2 facilitates charge separation and enhances electron mobility, which is an effective method to improve the sensing properties. Moreover, the nanofibers with a large specific surface area and a porous structure prepared by electrospinning provided more active sites available for the reaction with water molecules.
- 9 August 2022
- Published by Royal Society of Chemistry (RSC) in Materials Advances
- Vol. 3  (19) , 7265-7271
Open AccessPreparation of C–N co-doped zirconia electrospun nanofibers and their humidity sensing properties
Carbon and nitrogen co-doped ZrO2 (C–N/ZrO2) composites were systematically obtained via an electrospinning approach and a calcination process. The components of C and N were introduced by adding melamine to the electrospinning precursor solution. The effects of C and N doping amount on the morphology and the humidity sensing behavior of C–N/ZrO2 composites were studied. Compared with ZrO2, C–N/ZrO2 with a uniform nanofiber structure exhibits significant improvements in humidity sensing performance, such as fast response (2 s), short recovery time (15 s), negligible hysteresis (0.3195%) and excellent repeatability. The humidity sensing mechanism of the composites was explored. It turns out that the introduction of C and N components into ZrO2 facilitates charge separation and enhances electron mobility, which is an effective method to improve the sensing properties. Moreover, the nanofibers with a large specific surface area and a porous structure prepared by electrospinning provided more active sites available for the reaction with water molecules.
- 9 December 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57  (6) , 769-772
Novel one-dimensional Cu@C nanofibers: direct solid-state synthesis and applications in electrocatalytic water splitting
Encapsulating metal nanoparticles with a graphitic carbon shell to remit the loss of active sites has drawn attention in catalysis. Herein, we report the development of a facile strategy to prepare graphitic carbon encapsulated Cu nanoparticle (Cu@C) nanofibers by in situ pyrolysis of organic-layered copper hydroxides, which exhibited superior activity and durability for water splitting.
- 9 December 2020
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 57  (6) , 769-772
Novel one-dimensional Cu@C nanofibers: direct solid-state synthesis and applications in electrocatalytic water splitting
Encapsulating metal nanoparticles with a graphitic carbon shell to remit the loss of active sites has drawn attention in catalysis. Herein, we report the development of a facile strategy to prepare graphitic carbon encapsulated Cu nanoparticle (Cu@C) nanofibers by in situ pyrolysis of organic-layered copper hydroxides, which exhibited superior activity and durability for water splitting.
- Open Access
- 30 April 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8  (29) , 15999-16003
Facile synthesis of hollow hierarchical Ni@C nanocomposites with well-dispersed high-loading Ni nanoparticles embedded in carbon for reduction of 4-nitrophenol
Hollow hierarchical Ni@C nanocomposites with highly dispersed Ni nanoparticles (NPs) embedded in well-graphitized carbon matrix have been synthesized by solid-state pyrolysis of simple, well-defined organic–inorganic layered nickel hydroxide. The integration of highly dispersed Ni NPs, high Ni NPs content (up to ∼88.01 wt%), well-graphitized carbon as well as strong Ni/carbon interaction in the Ni@C make them display excellent catalytic activity and stable magnetic recyclability toward the reduction of 4-nitrophenol by NaBH4.
- 30 April 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8  (29) , 15999-16003
Open AccessFacile synthesis of hollow hierarchical Ni@C nanocomposites with well-dispersed high-loading Ni nanoparticles embedded in carbon for reduction of 4-nitrophenol
Hollow hierarchical Ni@C nanocomposites with highly dispersed Ni nanoparticles (NPs) embedded in well-graphitized carbon matrix have been synthesized by solid-state pyrolysis of simple, well-defined organic–inorganic layered nickel hydroxide. The integration of highly dispersed Ni NPs, high Ni NPs content (up to ∼88.01 wt%), well-graphitized carbon as well as strong Ni/carbon interaction in the Ni@C make them display excellent catalytic activity and stable magnetic recyclability toward the reduction of 4-nitrophenol by NaBH4.
- 3 November 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5  (116) , 96062-96066
Hydroxyl-rich nanoporous carbon nanosheets synthesized by a one-pot method and their application in the in situ preparation of well-dispersed Ag nanoparticles
Functional nanoporous carbon nanosheets (CNSs) with high surface areas have been synthesized by the pyrolysis of simple organic–inorganic layered zinc hydroxide nanosheets. The synthesized CNSs with abundant hydroxyl groups display remarkable reactivity and the capability for in situ loading with ultrafine Ag NPs, which show excellent catalytic activity toward the reduction of 4-nitrophenol (4-NP) by NaBH4.
- 3 November 2015
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 5  (116) , 96062-96066
Hydroxyl-rich nanoporous carbon nanosheets synthesized by a one-pot method and their application in the in situ preparation of well-dispersed Ag nanoparticles
Functional nanoporous carbon nanosheets (CNSs) with high surface areas have been synthesized by the pyrolysis of simple organic–inorganic layered zinc hydroxide nanosheets. The synthesized CNSs with abundant hydroxyl groups display remarkable reactivity and the capability for in situ loading with ultrafine Ag NPs, which show excellent catalytic activity toward the reduction of 4-nitrophenol (4-NP) by NaBH4.
- 26 November 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 53  (24) , 12841-12847
Single-Crystalline Organic–Inorganic Layered Cobalt Hydroxide Nanofibers: Facile Synthesis, Characterization, and Reversible Water-Induced Structural Conversion
New pink organic–inorganic layered cobalt hydroxide nanofibers intercalated with benzoate ions [Co(OH)(C6H5COO)·H2O] have been synthesized by using cobalt nitrate and sodium benzoate as reactants in water with no addition of organic solvent or surfactant. The high-purity nanofibers are single-crystalline in nature and very uniform in size with a diameter of about 100 nm and variable lengths over a wide range from 200 μm down to 2 μm by simply adjusting reactant concentrations. The as-synthesized products are well-characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), fast Fourier transforms (FFT), X-ray diffraction (XRD), energy dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), elemental analysis (EA), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), and UV–vis diffuse reflectance spectra (UV–vis). Our results demonstrate that the structure consists of octahedral cobalt layers and the benzoate anions, which are arranged in a bilayer due to the π–π stacking of small aromatics. The carboxylate groups of benzoate anions are coordinated to CoII ions in a strong bridging mode, which is the driving force for the anisotropic growth of nanofibers. When NaOH is added during the synthesis, green irregular shaped platelets are obtained, in which the carboxylate groups of benzoate anions are coordinated to the CoII ions in a unidentate fashion. Interestingly, the nanofibers exhibit a reversible transformation of the coordination geometry of the CoII ions between octahedral and pseudotetrahedral with a concomitant color change between pink and blue, which involves the loss and reuptake of unusual weakly coordinated water molecules without destroying the structure. This work offers a facile, cost-effective, and green strategy to rationally design and synthesize functional nanomaterials for future applications in catalysis, magnetism, gas storage or separation, and sensing technology.
- 26 November 2014
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 53  (24) , 12841-12847
Single-Crystalline Organic–Inorganic Layered Cobalt Hydroxide Nanofibers: Facile Synthesis, Characterization, and Reversible Water-Induced Structural Conversion
New pink organic–inorganic layered cobalt hydroxide nanofibers intercalated with benzoate ions [Co(OH)(C6H5COO)·H2O] have been synthesized by using cobalt nitrate and sodium benzoate as reactants in water with no addition of organic solvent or surfactant. The high-purity nanofibers are single-crystalline in nature and very uniform in size with a diameter of about 100 nm and variable lengths over a wide range from 200 μm down to 2 μm by simply adjusting reactant concentrations. The as-synthesized products are well-characterized by scanning electron microscope (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), fast Fourier transforms (FFT), X-ray diffraction (XRD), energy dispersive X-ray spectra (EDX), X-ray photoelectron spectra (XPS), elemental analysis (EA), Fourier transform infrared (FT-IR), thermogravimetric analysis (TGA), and UV–vis diffuse reflectance spectra (UV–vis). Our results demonstrate that the structure consists of octahedral cobalt layers and the benzoate anions, which are arranged in a bilayer due to the π–π stacking of small aromatics. The carboxylate groups of benzoate anions are coordinated to CoII ions in a strong bridging mode, which is the driving force for the anisotropic growth of nanofibers. When NaOH is added during the synthesis, green irregular shaped platelets are obtained, in which the carboxylate groups of benzoate anions are coordinated to the CoII ions in a unidentate fashion. Interestingly, the nanofibers exhibit a reversible transformation of the coordination geometry of the CoII ions between octahedral and pseudotetrahedral with a concomitant color change between pink and blue, which involves the loss and reuptake of unusual weakly coordinated water molecules without destroying the structure. This work offers a facile, cost-effective, and green strategy to rationally design and synthesize functional nanomaterials for future applications in catalysis, magnetism, gas storage or separation, and sensing technology.
- 24 July 2013
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3  (38) , 16990-16993
One-step solid-state synthesis of carbon nanotubes with surface functionality and their application in water treatment
Uniform carbon nanotubes (CNTs) with high purity and surface functionality have been synthesized by one-step solid-state pyrolysis of a simple organic–inorganic layered double hydroxide (LDH) precursor. The prepared CNTs without any extra treatment exhibit very high performance in the removal of both organic dyes and toxic heavy metal ions.
- 24 July 2013
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 3  (38) , 16990-16993
One-step solid-state synthesis of carbon nanotubes with surface functionality and their application in water treatment
Uniform carbon nanotubes (CNTs) with high purity and surface functionality have been synthesized by one-step solid-state pyrolysis of a simple organic–inorganic layered double hydroxide (LDH) precursor. The prepared CNTs without any extra treatment exhibit very high performance in the removal of both organic dyes and toxic heavy metal ions.