Michael Romain
Michael Romain has a total of 60 co-authors. Here are the top co-authors by number of shared publications:
- Alper Buyuktosunoglu
IBM T. J. Watson Research Center, Yorktown Heights, NY, USA
2 shared publications - Christopher Berry
International Business Machines, Poughkeepsie, NY, USA
2 shared publications - David Wolpert
International Business Machines, Poughkeepsie, NY, USA
2 shared publications Dureseti Chidambarrao
International Business Machines, T. J. Watson Research Center, Yorktown Heights, NY, USA
2 shared publicationsMark Cichanowski
International Business Machines, Austin, TX, USA
2 shared publications- Pradeep Bhadravati Parashurama
IBM Infrastructure, Bengaluru, Karnataka, India
2 shared publications
Latest Publications
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 63-77
Dynamic Guardband Features of the IBM z17 System
Computer systems strive for higher performance, improved energy efficiency, reliability, fault tolerance, and sustainability. Dynamically optimizing guardbands can help achieve all of these goals with minimal design and chip area costs, leveraging on-chip sensors and targeted investments in test and firmware. Many chips use fixed voltage guardbands at each supported frequency to safeguard correct operation in the field from all threatening sources of variation, including VDD power-supply droops from sudden workload changes, temperature excursions, and device aging. Previously, advances in robust error recovery and power-supply droop mitigation techniques have been used independently to reduce required guardbands and save power. In this work, we describe an IBM z17 system that dynamically optimizes guardbands by synchronously leveraging robust droop mitigation and robust error recovery in tandem to deliver significant system power savings.
- 30 October 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 63-77
Dynamic Guardband Features of the IBM z17 System
Computer systems strive for higher performance, improved energy efficiency, reliability, fault tolerance, and sustainability. Dynamically optimizing guardbands can help achieve all of these goals with minimal design and chip area costs, leveraging on-chip sensors and targeted investments in test and firmware. Many chips use fixed voltage guardbands at each supported frequency to safeguard correct operation in the field from all threatening sources of variation, including VDD power-supply droops from sudden workload changes, temperature excursions, and device aging. Previously, advances in robust error recovery and power-supply droop mitigation techniques have been used independently to reduce required guardbands and save power. In this work, we describe an IBM z17 system that dynamically optimizes guardbands by synchronously leveraging robust droop mitigation and robust error recovery in tandem to deliver significant system power savings.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 129-141
IBM Telum II Microprocessor: 5.5 GHz With On-Die AI and Data Processing, and Design–Technology Co-Optimizations for Power, Area, and Reliability
The IBM Telum II microprocessor features eight cores operating at a base frequency of 5.5 GHz, ten 36-MB L2 caches achieving 3.6-ns access latency, a 360-MB virtual L3 cache, and a new on-chip data processing unit (DPU) for I/O acceleration. As the foundation of the IBM z17 system’s dual-chip modules (DCMs), Telum II maintains high reliability and a power profile within 5% of the prior generation, while simultaneously increasing frequency and increasing latch count by 40%. Power, performance, area, and reliability enhancements span the design stack, including high-density SRAM cells from the Samsung 5-nm technology for increased cache size; design–technology co-optimizations (DTCOs) in the standard cell library image and sequential elements; physical design (PD), logic and architectural advancements to the core and artificial intelligence (AI) accelerator; and improved system-level capacity and encryption.
- 18 September 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 61 (1) , 129-141
IBM Telum II Microprocessor: 5.5 GHz With On-Die AI and Data Processing, and Design–Technology Co-Optimizations for Power, Area, and Reliability
The IBM Telum II microprocessor features eight cores operating at a base frequency of 5.5 GHz, ten 36-MB L2 caches achieving 3.6-ns access latency, a 360-MB virtual L3 cache, and a new on-chip data processing unit (DPU) for I/O acceleration. As the foundation of the IBM z17 system’s dual-chip modules (DCMs), Telum II maintains high reliability and a power profile within 5% of the prior generation, while simultaneously increasing frequency and increasing latch count by 40%. Power, performance, area, and reliability enhancements span the design stack, including high-density SRAM cells from the Samsung 5-nm technology for increased cache size; design–technology co-optimizations (DTCOs) in the standard cell library image and sequential elements; physical design (PD), logic and architectural advancements to the core and artificial intelligence (AI) accelerator; and improved system-level capacity and encryption.
- 28 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 56 (1) , 98-111
Cores, Cache, Content, and Characterization: IBM’s Second Generation 14-nm Product, z15
The IBM z15 system improves upon the prior-generation z14 design within the same chip footprint and technology node, while featuring the addition of two cores, 33%/100%/43% additional L2/L3/L4 cache, as well as additional core features and on-chip accelerators. The largest 5-drawer system configuration includes 20 central processor (CP) chips, five system controller (SC) chips, and 40 TB of memory. With ~200 cores across all CP chips operating with 99.99999% uptime at 5.2 GHz, z15 achieves a 25% increase in system capacity and a 14% single thread performance improvement over the z14 system. In this article, we describe the key design factors and system/characterization refinement that enabled these results, including the novel 2-Mb embedded dynamic random access memory (eDRAM) cell, a new voltage droop monitor, a more comprehensive power reduction infrastructure to reduce power-limited yield, results on reliability-limited versus power-limited yield, and a characterization effort for exploring even higher frequencies, with our first reported 6-GHz values achieved in the lab at customer temperatures and voltages.
- 28 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Solid-State Circuits
- Vol. 56 (1) , 98-111
Cores, Cache, Content, and Characterization: IBM’s Second Generation 14-nm Product, z15
The IBM z15 system improves upon the prior-generation z14 design within the same chip footprint and technology node, while featuring the addition of two cores, 33%/100%/43% additional L2/L3/L4 cache, as well as additional core features and on-chip accelerators. The largest 5-drawer system configuration includes 20 central processor (CP) chips, five system controller (SC) chips, and 40 TB of memory. With ~200 cores across all CP chips operating with 99.99999% uptime at 5.2 GHz, z15 achieves a 25% increase in system capacity and a 14% single thread performance improvement over the z14 system. In this article, we describe the key design factors and system/characterization refinement that enabled these results, including the novel 2-Mb embedded dynamic random access memory (eDRAM) cell, a new voltage droop monitor, a more comprehensive power reduction infrastructure to reduce power-limited yield, results on reliability-limited versus power-limited yield, and a characterization effort for exploring even higher frequencies, with our first reported 6-GHz values achieved in the lab at customer temperatures and voltages.