JCJunbin Chen

Junbin Chen

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Junbin Chen has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • From Vibration to Motor Current: A Cross-Modal Meta-Learning-Driven Fault Diagnosis Framework for Harmonic Drive of Industrial Robots

    by Junbin Chen, Hongyi Qu, Ruyi Huang, Wei Feng, Weihua Li

    Harmonic drives are critical components in industrial robots, yet their fault diagnosis remains challenging due to sensor limitations. Vibration signals, although informative, are often impractical in industrial settings, whereas motor current signals are more accessible but contain weaker fault signatures for the mechanical components driven by the motor due to their indirect nature. To bridge this gap, this study proposes a cross-modal meta-learning network (CROMET-Net), which transfers diagnostic knowledge from vibration signals (strong modality) to motor current signals (weak modality) through a meta-learning-based alignment strategy. The core design involves a dual-level cross-modal alignment mechanism embedded into the inner loop of meta-training, which enforces both class-level consistency and modality-invariant feature learning. A three-stage training strategy is adopted, including vibration-based pretraining, meta-alignment across modalities, and fine-tuning using only motor current data. Experimental results on a harmonic drive testbed demonstrate that CROMET-Net significantly outperforms conventional current-based methods and existing cross-modal baselines, highlighting the effectiveness of the proposed method in transferring diagnostic knowledge across modalities.


  • Universal Source-Free Knowledge Transfer Network for Fault Diagnosis of Electromechanical System With Multimodal Signals

    by Ke Yue, Jipu Li, Zhuyun Chen, Junbin Chen, Weihua Li

    Recently, deep learning (DL) has found widespread applications in electromechanical systems due to its powerful feature extraction capabilities. However, DL-based intelligent fault diagnosis (IFD) models encounter challenges including inadequate data privacy protection, limited generalization performance, and insufficient use of multi-modal data in real-world industrial settings. In this study, a novel universal source-free knowledge transfer network (USKTN) is proposed for the IFD of electromechanical systems. Firstly, representative features of fault classes are effectively learned from multiple modalities to ensure that comprehensive fault information is obtained. Secondly, unlabeled target samples are labeled using a high-confident pseudo-label strategy. Specifically, a self-supervised deep clustering mechanism and an uncertainty-estimated pseudo-labeling filtering mechanism are developed to construct a high-confidence pseudo-label dataset. Finally, a novel mixed loss function is designed to train the diagnostic model, which not only addresses the noise interference issue caused by low-quality pseudo-labeled samples, but also effectively resolves the data distribution discrepancy, achieving knowledge transfer from the source domain to the target domain. The effectiveness of the proposed USKTN is verified through experiments on two different datasets of electromechanical systems. The experiments indicate that the proposed USKTN is capable of accurately diagnosing unlabeled target domain data without requiring any source samples.


  • Top Cited Papers

    WavCapsNet: An Interpretable Intelligent Compound Fault Diagnosis Method by Backward Tracking

    by Weihua Li, Hao Lan, Junbin Chen, Ke Feng, Ruyi Huang

    With significant advantages in feature learning, the deep learning based compound fault diagnosis method has brought many successful applications for industrial equipment. However, few studies focus on the interpretability of intelligent compound fault diagnosis methods, and the diagnosis results are hard to interpret which prevents the wide application of these methods in practical industrial scenarios. To solve the above challenging problems, an intelligent and interpretable compound fault diagnosis framework, called wavelet capsule network (WavCapsNet), is proposed for machinery by leveraging the backward tracking technique. First, the WavCapsNet is constructed with a wavelet kernel convolutional layer which is employed to learn the features with interpretable meaning from vibration signals, and two capsule layers which endow the diagnosis model with the ability to decouple the compound fault intelligently. Second, the WavCapsNet is trained and optimized with the normal and single fault samples (without compound fault samples). Finally, the interpretable analysis is launched by backward tracking the coupling matrices in capsule layers, which is focused on the relationship between the learned features and different health conditions. The experimental results on a five-speed transmission dataset show that the proposed method, compared to other methods, not only achieves higher compound fault decoupling accuracy under the scenario of incomplete fault data but also improves the transparency and interpretability in the decision-making process of fault diagnosis.


  • Multiscale Wavelet Prototypical Network for Cross-Component Few-Shot Intelligent Fault Diagnosis

    by Ke Yue, Jipu Li, Junbin Chen, Ruyi Huang, Weihua Li

    The techniques of machine learning, as well as deep learning methods, have seen a wide application in the intelligent fault diagnosis field these years. However, contemporary methods are still restricted under some drawbacks: 1) Conventional deep learning-based models always rely on the quality and amount of the data. However, there are usually insufficient samples in practical scenarios because of suddenly happened failures; 2) The existing DL models cannot be well implemented in different rotating components which have different distributions and label space, such as from bearings to gears. To address these problems, a novel multiscale wavelet prototypical network (MWPN) is proposed in this study. It is designed to solve the few-shot fault diagnosis of the cross-component problem in rotating machines: the model is trained by one component with sufficient data and tested in another component with little data. First, a multiscale wavelet convolution module is designed to extract abundant features. Second, a metric meta-learner module is applied to measure the distance distribution between the labeled and unlabeled data. With the episode training strategy, the model is optimized and can adapt to similar tasks in a new machine and classify the unknown fault categories with few labeled samples. Experiments on three datasets are carried out to demonstrate the effectiveness of MWPN. Extensive experimental results show that MWPN outperforms many baseline methods on few-shot learning tasks in different working conditions and components.


  • Open Access

    Clustering Federated Learning for Bearing Fault Diagnosis in Aerospace Applications with a Self-Attention Mechanism

    by Weihua Li, Wansheng Yang, Gang Jin, Junbin Chen, Jipu Li, Ruyi Huang, Zhuyun Chen

    Bearings, as the key mechanical components of rotary machinery, are widely used in modern aerospace equipment, such as helicopters and aero-engines. Intelligent fault diagnosis, as the main function of prognostic health management systems, plays a critical role in maintaining equipment safety in aerospace applications. Recently, data-driven intelligent diagnosis approaches have achieved great success due to the availability of large-scale, high-quality, and complete labeled data. However, in a real application, labeled data is often scarce because it requires manual labeling, which is time-consuming and labor-intensive. Meanwhile, health monitoring data are usually scattered in different regions or equipment in the form of data islands. Traditional fault diagnosis techniques fail to gather enough data for model training due to data security, economic conflict, relative laws, and other reasons. Therefore, it is a challenge to effectively combine the data advantages of different equipment to develop an intelligent diagnosis model with better performance. To address this issue, a novel clustering federated learning (CFL) method with a self-attention mechanism is proposed for bearing fault diagnosis. Firstly, a deep neural network with a self-attention mechanism is developed in a convolutional pipe for feature extraction, which can capture local and global information from raw input. Then, the CFL is further constructed to gather the data from different equipment with similar data distribution in an unsupervised manner. Finally, the CFL-based diagnosis model can be well trained by fully utilizing the distributed data, while ensuring data privacy safety. Experiments are carried out with three different bearing datasets in aerospace applications. The effectiveness and the superiority of the proposed method have been validated compared with other popular fault diagnosis schemes.


  • Federated Transfer Learning for Bearing Fault Diagnosis With Discrepancy-Based Weighted Federated Averaging

    by Junbin Chen, Jipu Li, Ruyi Huang, Ke Yue, Zhuyun Chen, Weihua Li

    Generally, high performance of deep learning (DL)-based machinery fault diagnosis methods relies on abundant labeled fault samples under various working conditions, while they are usually stored by different users and not communicated with each other due to data privacy protection. Federated learning (FL) is a possible solution, but the traditional federated averaging (FedAvg) algorithm in FL ignores the potential domain shift of different FL participants, which limits its further application. Therefore, a federated transfer learning (FTL) framework with discrepancy-based weighted federated averaging (D-WFA) is proposed to train the good global diagnosis model collaboratively as well as protect data privacy. First, local labeled source domain data and unlabeled target domain data are utilized to update multiple local models with generalization ability. Then, a maximum mean discrepancy (MMD)-based dynamic weighted averaging algorithm is designed to aggregate the updated local models with automatically learned weight. The proposed D-WFA overcomes the disadvantage of the traditional FedAvg algorithm, which assumes that all clients have the same contribution in constructing the global model during FL training. Experiment results on a bearing dataset show that the proposed D-WFA outperforms the traditional FedAvg and relative FTL method, which offers a promising solution in privacy-preserving machine learning for fault diagnosis.


  • Deep Self-Supervised Domain Adaptation Network for Fault Diagnosis of Rotating Machine With Unlabeled Data

    by Jipu Li, Ruyi Huang, Junbin Chen, Jingyan Xia, Zhuyun Chen, Weihua Li

    Recently, domain adaptation (DA)-based fault diagnosis (FD) approaches have been receiving increasing attention in intelligent FD of rotating machinery due to its powerful knowledge transfer capability on different working conditions. The existing methods traditionally assume that the number of fault categories between the source and target domains is equal. However, this assumption generally does not conform to the real industrial scenarios, where the coincidence degree between two domains is uncertain due to the unlabeled data obtained from the target domain. Therefore, a more general framework is studied to satisfy unclear DA scenarios. This demanding DA problem is solved in this article using deep self-supervised DA network. First, a novel neighborhood clustering technique is used to cluster fault samples in a self-supervised way. Second, an entropy-based feature alignment is introduced into the proposed method to separate the known and unknown samples in source and target domains. The experimental results on a gearbox dataset demonstrate that the proposed method is hopeful for actual industrial applications.


  • Top Cited Papers

    Multiscale Convolutional Neural Network With Feature Alignment for Bearing Fault Diagnosis

    by Junbin Chen, Ruyi Huang, Kun Zhao, Wei Wang, Longcan Liu, Weihua Li

    In recent years, deep learning methods, especially convolutional neural network (CNN), have received extensive attentions and applications in fault diagnosis. However, recent studies have shown that the shift-invariance of CNN is not good enough, resulting in fragile feature extraction and sharp reduction in model performance when the shift occurs in the input. To improve the shift-invariance of CNN, considering the periodic characteristics of vibration signals, a multiscale CNN with feature alignment (MSCNN-FA) is proposed for bearing fault diagnosis under different working conditions. First, by analyzing the operating principles of the convolutional layer and pooling layer, a feature alignment module including single-stride convolution layer, adaptive max-pooling layer, and global average pooling layer is designed to obtain aligned features. Next, to extract shift-invariant robust features from vibration signals, a multiscale convolution strategy is utilized, and a feature-aligned multiscale feature extractor is constructed. Finally, a classifier composed of fully connected (FC) layers is constructed for bearing fault diagnosis. The effectiveness of the method is verified by a rolling bearing experiment, which outperforms other related existing CNN-based methods in terms of diagnosis accuracy and feature robustness.


  • Top Cited Papers

    Deep Adversarial Capsule Network for Compound Fault Diagnosis of Machinery Toward Multidomain Generalization Task

    by Ruyi Huang, Jipu Li, Yixiao Liao, Junbin Chen, Zhen Wang, Weihua Li

    With advanced measurement technologies and signal analytics algorithms developed rapidly, the past decades have witnessed large amount of successful breakthroughs and applications in the field of intelligent fault diagnosis (IFD). However, the historical IFD methods have difficulties for compound fault diagnosis, when labeled data cannot be collected in advance for new or extreme working conditions. Facing with such challenges, a Deep Adversarial Capsule Network (DACN) is proposed to embed multi-domain generalization into the intelligent compound fault diagnosis, so that the DACN not only can intelligently decouple the compound fault into multiple single faults for industrial equipment (IE) but also can be generalized from certain working conditions to another new. First, a DACN including feature extractor, decoupling classifier and multi-domain classifier is constructed for feature learning, fault decoupling and unsupervised multi-domain adaptation, respectively. Second, adversarial training is introduced into the DACN in training stage via a gradient reversal layer that can build the connection between the feature extractor and domain classifier, which can force the DACN to learn the domain-invariance features. Finally, the DACN is trained using the single-faults data collected under multiple working conditions, and then applied to monitor the health condition of IE under new working conditions. The cross-validation experiments have been implemented on an automobile transmission (AT), which illustrates that the DACN obtains an optimum performance with the highest average accuracy of 97.65% for compound fault diagnosis of IE under multi-domain generalization task, and outperforms other related methods.