Yudi Qin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yudi Qin has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
Jiuyu Du
7 shared publicationsLanguang Lu
6 shared publicationsMinggao Ouyang
5 shared publicationsXuebing Han
4 shared publications- Minggao Ouyang
State Key Laboratory of Intelligent Green Vehicle and Mobility, Tsinghua University, Beijing 100084, China
3 shared publications Xiaoru Chen
3 shared publications
Latest Publications
- 7 October 2023
- Published by Elsevier in eTransportation
- Vol. 19
Lithium ion batteries participating in frequency regulation for power grid under the thermoelectric coupling degradation mechanisms
- 7 October 2023
- Published by Elsevier in eTransportation
- Vol. 19
Lithium ion batteries participating in frequency regulation for power grid under the thermoelectric coupling degradation mechanisms
- 3 October 2023
- Published by Elsevier in eTransportation
- Vol. 18
Toward flexibility of user side in China: Virtual power plant (VPP) and vehicle-to-grid (V2G) interaction
- 3 October 2023
- Published by Elsevier in eTransportation
- Vol. 18
Toward flexibility of user side in China: Virtual power plant (VPP) and vehicle-to-grid (V2G) interaction
- 16 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (4) , 3815-3826
A Simplified Sensorless Synchronous Rectification Method for Inner Phase Shift Control in CLLC Converters
The CLLC converter is a promising topology for bidirectional power conversion applications, such as vehicle-to-grid and battery energy storage systems. In these applications, wide output voltage range is needed. However, traditional pulse frequency modulation method is not suitable for wide output range because of wide switching frequency range. Inner phase shift (IPS) control is a good solution for this issue. In CLLC converters, to further increase the efficiency, synchronous rectification (SR) is required. In this paper, a simplified sensorless SR method is proposed for IPS control. A comprehensive operation mode analysis and an accurate operation mode model is established for IPS control in CLLC converters. With the operation mode model, waveform of secondary side current is simplified. As a result, only a standard quadratic-root formula needs to be calculated to generate SR drive signal, and no extra sensors are needed. The method is low cost and is suitable to implement in embedded systems. A prototype is built to verify the proposed simplified sensorless SR method. The proposed method achieves an obvious efficiency improvement (up to 1.88%) over uncontrolled rectification, and the effect of the proposed method is nearly the same as that of complete SR (maximum efficiency difference is 0.40%).
- 16 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (4) , 3815-3826
A Simplified Sensorless Synchronous Rectification Method for Inner Phase Shift Control in CLLC Converters
The CLLC converter is a promising topology for bidirectional power conversion applications, such as vehicle-to-grid and battery energy storage systems. In these applications, wide output voltage range is needed. However, traditional pulse frequency modulation method is not suitable for wide output range because of wide switching frequency range. Inner phase shift (IPS) control is a good solution for this issue. In CLLC converters, to further increase the efficiency, synchronous rectification (SR) is required. In this paper, a simplified sensorless SR method is proposed for IPS control. A comprehensive operation mode analysis and an accurate operation mode model is established for IPS control in CLLC converters. With the operation mode model, waveform of secondary side current is simplified. As a result, only a standard quadratic-root formula needs to be calculated to generate SR drive signal, and no extra sensors are needed. The method is low cost and is suitable to implement in embedded systems. A prototype is built to verify the proposed simplified sensorless SR method. The proposed method achieves an obvious efficiency improvement (up to 1.88%) over uncontrolled rectification, and the effect of the proposed method is nearly the same as that of complete SR (maximum efficiency difference is 0.40%).
- Open Access
A Comprehensive Study of Degradation Characteristics and Mechanisms of Commercial Li(NiMnCo)O2 EV Batteries under Vehicle-To-Grid (V2G) Services
Lithium-ion batteries on electric vehicles have been increasingly deployed for the enhancement of grid reliability and integration of renewable energy, while users are concerned about extra battery degradation caused by vehicle-to-grid (V2G) operations. This paper details a multi-year cycling study of commercial 24 Ah pouch batteries with Li(NiMnCo)O2 (NCM) cathode, varying the average state of charge (SOC), depth of discharge (DOD), and charging rate by 33 groups of experiment matrix. Based on the reduced freedom voltage parameter reconstruction (RF-VPR), a more efficient non-intrusive diagnosis is combined with incremental capacity (IC) analysis to evaluate the aging mechanisms including loss of lithium-ion inventory and loss of active material on the cathode and anode. By analyzing the evolution of indicator parameters and the cumulative degradation function (CDF) of the battery capacity, a non-linear degradation model with calendar and cyclic aging is established to evaluate the battery aging cost under different unmanaged charging (V0G) and V2G scenarios. The result shows that, although the extra energy throughput would cause cyclic degradation, discharging from SOC 90 to 65% by V2G will surprisingly alleviate the battery decaying by 0.95% compared to the EV charged within 90–100% SOC, due to the improvement of calendar life. By optimal charging strategies, the connection to the smart grid can potentially extend the EV battery life beyond the scenarios without V2G.
Open AccessA Comprehensive Study of Degradation Characteristics and Mechanisms of Commercial Li(NiMnCo)O2 EV Batteries under Vehicle-To-Grid (V2G) Services
Lithium-ion batteries on electric vehicles have been increasingly deployed for the enhancement of grid reliability and integration of renewable energy, while users are concerned about extra battery degradation caused by vehicle-to-grid (V2G) operations. This paper details a multi-year cycling study of commercial 24 Ah pouch batteries with Li(NiMnCo)O2 (NCM) cathode, varying the average state of charge (SOC), depth of discharge (DOD), and charging rate by 33 groups of experiment matrix. Based on the reduced freedom voltage parameter reconstruction (RF-VPR), a more efficient non-intrusive diagnosis is combined with incremental capacity (IC) analysis to evaluate the aging mechanisms including loss of lithium-ion inventory and loss of active material on the cathode and anode. By analyzing the evolution of indicator parameters and the cumulative degradation function (CDF) of the battery capacity, a non-linear degradation model with calendar and cyclic aging is established to evaluate the battery aging cost under different unmanaged charging (V0G) and V2G scenarios. The result shows that, although the extra energy throughput would cause cyclic degradation, discharging from SOC 90 to 65% by V2G will surprisingly alleviate the battery decaying by 0.95% compared to the EV charged within 90–100% SOC, due to the improvement of calendar life. By optimal charging strategies, the connection to the smart grid can potentially extend the EV battery life beyond the scenarios without V2G.
- 9 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (6) , 7658-7667
External Liquid Cooling Method for Lithium-Ion Battery Modules Under Ultra-Fast Charging
Electric vehicles (EVs) are booming all over the world for a low carbon emission and greener environment. The fast charging is an urgent demand for consumers. However, the dramatic temperature rising during high power charging has a high risk of trigging thermal runaway and other safety issues. This study proposes an external liquid cooling method for lithium-ion battery module with cooling plates and circulating cool equipment. A comprehensive experiment study is carried out on a battery module with up to 4C fast charging, the results show that the three-side cooling plates layout with low coolant temperature provides better temperature control effect, while the coolant velocity and type have very weak impact. Then the simulation model with high precision is built for ultra-fast charging, and a safe charging range under 5C charging is proposed. The safe charging range under 5C can be increased by 50.1%. The environment close to the room temperature demonstrates the best effects of external cooling. For actual applications in the electric vehicles (EVs), the circulating cooling equipment outside EVs can be integrated with high-power charging infrastructure and provide a 117km improvement in mileage under 5C safe charging which indicates a tremendous application prospect.
- 9 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (6) , 7658-7667
External Liquid Cooling Method for Lithium-Ion Battery Modules Under Ultra-Fast Charging
Electric vehicles (EVs) are booming all over the world for a low carbon emission and greener environment. The fast charging is an urgent demand for consumers. However, the dramatic temperature rising during high power charging has a high risk of trigging thermal runaway and other safety issues. This study proposes an external liquid cooling method for lithium-ion battery module with cooling plates and circulating cool equipment. A comprehensive experiment study is carried out on a battery module with up to 4C fast charging, the results show that the three-side cooling plates layout with low coolant temperature provides better temperature control effect, while the coolant velocity and type have very weak impact. Then the simulation model with high precision is built for ultra-fast charging, and a safe charging range under 5C charging is proposed. The safe charging range under 5C can be increased by 50.1%. The environment close to the room temperature demonstrates the best effects of external cooling. For actual applications in the electric vehicles (EVs), the circulating cooling equipment outside EVs can be integrated with high-power charging infrastructure and provide a 117km improvement in mileage under 5C safe charging which indicates a tremendous application prospect.
- 16 May 2022
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 72, 442-452
An ultra-fast charging strategy for lithium-ion battery at low temperature without lithium plating
- 16 May 2022
- Published by Elsevier in Journal of Energy Chemistry
- Vol. 72, 442-452
An ultra-fast charging strategy for lithium-ion battery at low temperature without lithium plating
- Open Access
- 1 January 2022
- Published by Elsevier in Cell Reports Physical Science
- Vol. 3 (1)
Lithium-ion batteries under pulsed current operation to stabilize future grids
- 1 January 2022
- Published by Elsevier in Cell Reports Physical Science
- Vol. 3 (1)
Open AccessLithium-ion batteries under pulsed current operation to stabilize future grids
- Open Access
Drive circuitry of an electric vehicle enabling rapid heating of the battery pack at low temperatures