Ying Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ying Lin has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Qingping Song
Anhui Polytechnic University
7 shared publications- Puyou Jia
Institute of Chemical Industry of Forest Products Chinese Academy of Forestry (CAF) Key Lab of Biomass Energy and Materials Jiangsu Co‐Innovation Center of Efficient Processing and Utilization of Forest Resources Nanjing China
5 shared publications Can Sun
Anhui Polytechnic University
4 shared publicationsKangyong Xu
Anhui Polytechnic University
4 shared publicationsShenglong Liao
Anhui Laboratory of Clean Catalytic Engineering, School of Chemical and Environmental Engineering, Anhui Polytechnic University, Wuhu 241000, P. R. China
4 shared publications- Zhiyong Liu
Anhui Polytechnic University
4 shared publications
Latest Publications
- 12 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (18) , 16386-16397
Soybean Oil-Based Functional Elastomers with Rapid Stress Relaxation: Enabled by Dual Dynamic Interactions
Developing functional polymeric materials from renewable and biodegradable biobased feedstocks is attractive for alleviating the crisis of energy shortages and achieving sustainable development. In this study, we report a design of a biobased elastomer from renewable soybean oil and biodegradable poly(ε-caprolactone) (PCL), which enables the construction of polymer network systems integrating multiple functional features. Cross-linked networks formed by incorporating multiple hydrogen bonds and reversible boronic ester bonds could tune the elastomer tensile strength to 11.06 MPa and impart observable self-healing properties. The obtained network was observed to have a relatively low relaxation activation energy of 33.41 ± 0.46 kJ/mol and enable fast stress relaxation. Moreover, benefiting from the cooperative contribution of hydrogen bond reformation and dynamic exchange of boronic ester bonds, the elastomer exhibited dual-responsive reprocessability and room-temperature damping properties. Besides, the semi-crystalline nature of PCL and hydrogen bonds within the system support the outstanding shape memory capability of the elastomer. All in all, this work offers a feasible structural design approach for integrating multiple functions into a single biobased elastomer, which can serve as a promising alternative in potential applications.
- 12 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (18) , 16386-16397
Soybean Oil-Based Functional Elastomers with Rapid Stress Relaxation: Enabled by Dual Dynamic Interactions
Developing functional polymeric materials from renewable and biodegradable biobased feedstocks is attractive for alleviating the crisis of energy shortages and achieving sustainable development. In this study, we report a design of a biobased elastomer from renewable soybean oil and biodegradable poly(ε-caprolactone) (PCL), which enables the construction of polymer network systems integrating multiple functional features. Cross-linked networks formed by incorporating multiple hydrogen bonds and reversible boronic ester bonds could tune the elastomer tensile strength to 11.06 MPa and impart observable self-healing properties. The obtained network was observed to have a relatively low relaxation activation energy of 33.41 ± 0.46 kJ/mol and enable fast stress relaxation. Moreover, benefiting from the cooperative contribution of hydrogen bond reformation and dynamic exchange of boronic ester bonds, the elastomer exhibited dual-responsive reprocessability and room-temperature damping properties. Besides, the semi-crystalline nature of PCL and hydrogen bonds within the system support the outstanding shape memory capability of the elastomer. All in all, this work offers a feasible structural design approach for integrating multiple functions into a single biobased elastomer, which can serve as a promising alternative in potential applications.
- 8 May 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (21) , 2265-2274
Achieving high lignin content and mechanical enhancement in biobased thermosets via a high-molecular-weight soybean oil skeleton
We developed sustainable thermosets with high lignin content (up to 50%) by constructing a flexible, ultra-high molecular weight soybean oil skeleton via ring-opening metathesis polymerization (ROMP), achieving high strength and good toughness.
- 8 May 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (21) , 2265-2274
Achieving high lignin content and mechanical enhancement in biobased thermosets via a high-molecular-weight soybean oil skeleton
We developed sustainable thermosets with high lignin content (up to 50%) by constructing a flexible, ultra-high molecular weight soybean oil skeleton via ring-opening metathesis polymerization (ROMP), achieving high strength and good toughness.
- Open Access
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (31) , 15108-15116
Substituent Engineering of Dynamic Covalent Bonds Enables Simultaneous Enhancement of Performance and Recyclability
A central challenge in designing recyclable polymers lies in the trade-off between recyclability and performance. State-of-the-art strategies leveraging supramolecular interactions or dynamic covalent bonds (DCBs), either individually or in orthogonal...
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (31) , 15108-15116
Open AccessSubstituent Engineering of Dynamic Covalent Bonds Enables Simultaneous Enhancement of Performance and Recyclability
A central challenge in designing recyclable polymers lies in the trade-off between recyclability and performance. State-of-the-art strategies leveraging supramolecular interactions or dynamic covalent bonds (DCBs), either individually or in orthogonal...
- 25 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (1) , 651-661
Dual-Recyclable Biobased Elastomers with Hydrogen-Bonded Networks toward Sustainable Adhesives
- 25 December 2025
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (1) , 651-661
Dual-Recyclable Biobased Elastomers with Hydrogen-Bonded Networks toward Sustainable Adhesives
- 9 December 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (2) , 1403-1412
Synthesis and Properties of Tung Oil Based Self‐Healing Elastomers
Based on the demand for sustainable economic and social development, the development of functional elastomers with renewable sources has attracted much attention. However, the mediation of the contradiction between the repairability and mechanical strength of elastomers remains a practical challenge. In this work, we have designed and prepared the functional elastomers starting from renewable biomass, which exhibit good strength and self‐healing properties. Tung oil was used to synthesize tung oil‐based monomers (TOMA) by modifying ester groups, which were further polymerized into comb‐like homopolymers (PTOMA). The tung oil‐based polymers were cross‐linked by 2, 2′‐(1,4‐phenyl)‐bis[4‐mercapto‐1,3,2‐dioxabane] (BDB) to construct functional elastomers with dynamic boronic ester bonds and intermolecular hydrogen bonds. Reversible cross‐linking networks in elastomers enable efficient self‐healing. Additionally, the thermal and mechanical properties of the biobased elastomers can be tuned by controlling the content of the cross‐linker. The prepared elastomers possess comparable mechanical properties to conventional elastomers, with strengths up to 9.68 MPa. This work provides an idea and approach for the high‐value application of biomass resources.
- 9 December 2025
- Published by Wiley in Polymer Engineering & Science
- Vol. 66 (2) , 1403-1412
Synthesis and Properties of Tung Oil Based Self‐Healing Elastomers
Based on the demand for sustainable economic and social development, the development of functional elastomers with renewable sources has attracted much attention. However, the mediation of the contradiction between the repairability and mechanical strength of elastomers remains a practical challenge. In this work, we have designed and prepared the functional elastomers starting from renewable biomass, which exhibit good strength and self‐healing properties. Tung oil was used to synthesize tung oil‐based monomers (TOMA) by modifying ester groups, which were further polymerized into comb‐like homopolymers (PTOMA). The tung oil‐based polymers were cross‐linked by 2, 2′‐(1,4‐phenyl)‐bis[4‐mercapto‐1,3,2‐dioxabane] (BDB) to construct functional elastomers with dynamic boronic ester bonds and intermolecular hydrogen bonds. Reversible cross‐linking networks in elastomers enable efficient self‐healing. Additionally, the thermal and mechanical properties of the biobased elastomers can be tuned by controlling the content of the cross‐linker. The prepared elastomers possess comparable mechanical properties to conventional elastomers, with strengths up to 9.68 MPa. This work provides an idea and approach for the high‐value application of biomass resources.
- 21 April 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (5) , 2922-2933
Biomass-Based Functional Composite Resins with Recyclable and Shape Memory Properties
A key challenge in developing advanced functional thermosets lies in designing molecular architectures capable of integrating different specific performances into one material to meet diverse application demands. Here, a chitosan-derived trifunctional compound containing maleimide groups was used to directly cross-link tung oil-based polymer for fabricating multifunctional composite bioresins with reversible Diels-Alder bonds. The reversible cross-linking networks within resins were featured with stress relaxation, thermal reprocessability, and recyclability. The retro D-A reaction at relatively high temperatures provided the dynamic characteristics of the resins while ensuring their dimensional stability. Moreover, chitosan enhanced the mechanical properties of the resins while forming supramolecular hydrogen bonds via its abundant amino/hydroxyl groups, realizing shape memory of the resins. Furthermore, the synergistic interaction between chitosan functional groups and hydrogen bonding also imparted proton conductivity to the resins. This work provided a molecular design paradigm that harmonizes multifunctional integration in fully biomass resins, aiming for high-value applications.
- 21 April 2025
- Published by American Chemical Society (ACS) in Biomacromolecules
- Vol. 26 (5) , 2922-2933
Biomass-Based Functional Composite Resins with Recyclable and Shape Memory Properties
A key challenge in developing advanced functional thermosets lies in designing molecular architectures capable of integrating different specific performances into one material to meet diverse application demands. Here, a chitosan-derived trifunctional compound containing maleimide groups was used to directly cross-link tung oil-based polymer for fabricating multifunctional composite bioresins with reversible Diels-Alder bonds. The reversible cross-linking networks within resins were featured with stress relaxation, thermal reprocessability, and recyclability. The retro D-A reaction at relatively high temperatures provided the dynamic characteristics of the resins while ensuring their dimensional stability. Moreover, chitosan enhanced the mechanical properties of the resins while forming supramolecular hydrogen bonds via its abundant amino/hydroxyl groups, realizing shape memory of the resins. Furthermore, the synergistic interaction between chitosan functional groups and hydrogen bonding also imparted proton conductivity to the resins. This work provided a molecular design paradigm that harmonizes multifunctional integration in fully biomass resins, aiming for high-value applications.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Polymer Science, Series A
- Vol. 65 (6) , 692-701
Fabrication of Dual-Functional Micelles Based on Star-Shaped Copolymer for Bioimaging
Dual-modal fluorescent/magnetic resonance imaging attracts more and more attentions in biomedical applications. Herein, star-shaped poly(ε-caprolactone)-b-poly(N-vinylpyrrolidone) amphiphilic copolymer with a tetrakis-(4-amino)-terminated tetraphenylethylene core was synthesized. Then, dual-functional nano micelles were achieved via a facile self-assembly of the star copolymer and in situ encapsulation of iron oxide nanoparticles. The fluorescent characteristic of the tetraphenylethylene moiety and encapsulation of iron oxide endowed the resultant dual-functional micelles with bright fluorescence and superparamagnetic properties, which indicated that the PCL segments coated on magnetic nanoparticles is effective at separating the conjugated core from iron oxide nanoparticles to minimize fluorescence quenching. The obtained micelles were found to have a good colloidal and fluorescent stability in different environment. In vitro studies revealed that these dual-functional micelles could serve as an effective fluorescent probe to achieve imaging of MCF-7 cells without obvious cytotoxicity. Thus, this work provides a facile strategy to fabricate fluorescent-magnetic dual-functional micelles for dual-modal imaging applications.
- 1 December 2023
- Published by Pleiades Publishing Ltd in Polymer Science, Series A
- Vol. 65 (6) , 692-701
Fabrication of Dual-Functional Micelles Based on Star-Shaped Copolymer for Bioimaging
Dual-modal fluorescent/magnetic resonance imaging attracts more and more attentions in biomedical applications. Herein, star-shaped poly(ε-caprolactone)-b-poly(N-vinylpyrrolidone) amphiphilic copolymer with a tetrakis-(4-amino)-terminated tetraphenylethylene core was synthesized. Then, dual-functional nano micelles were achieved via a facile self-assembly of the star copolymer and in situ encapsulation of iron oxide nanoparticles. The fluorescent characteristic of the tetraphenylethylene moiety and encapsulation of iron oxide endowed the resultant dual-functional micelles with bright fluorescence and superparamagnetic properties, which indicated that the PCL segments coated on magnetic nanoparticles is effective at separating the conjugated core from iron oxide nanoparticles to minimize fluorescence quenching. The obtained micelles were found to have a good colloidal and fluorescent stability in different environment. In vitro studies revealed that these dual-functional micelles could serve as an effective fluorescent probe to achieve imaging of MCF-7 cells without obvious cytotoxicity. Thus, this work provides a facile strategy to fabricate fluorescent-magnetic dual-functional micelles for dual-modal imaging applications.
- 11 March 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (20)
Sustainable and mechanically robust epoxy resins derived from chitosan and tung oil with proton conductivity
The development of sustainable and functional epoxy resins from renewable biomass is gaining increasing attention. Herein, renewable and mechanically strong epoxy resins from chitosan and tung oil that possess proton conduction properties are developed. Firstly, tung oil‐based epoxy monomers and chitosan based chain transfer agent were prepared. Then, a “grafting from” reversible addition‐fragmentation chain transfer (RAFT) polymerization was carried out on chitosan using epoxy monomers toward elastic graft copolymer, which combined rigid backbone and flexible side chains in one macromolecule. After being cured with citric acid (catalyst‐free), a biomass‐based epoxy resins with dual network structure can be obtained. The thermal and mechanical properties of these epoxy resins could be tuned through controlling the content of cross‐linkers. Moreover, the chitosan bearing abundant amino groups not only enhanced strength of the epoxy resins, but also endowed them with proton conductivity. Overall, the epoxy resins exhibited high tensile strength and comparable proton conduction, which provides a new paradigm to design green functional materials for potential applications.
- 11 March 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (20)
Sustainable and mechanically robust epoxy resins derived from chitosan and tung oil with proton conductivity
The development of sustainable and functional epoxy resins from renewable biomass is gaining increasing attention. Herein, renewable and mechanically strong epoxy resins from chitosan and tung oil that possess proton conduction properties are developed. Firstly, tung oil‐based epoxy monomers and chitosan based chain transfer agent were prepared. Then, a “grafting from” reversible addition‐fragmentation chain transfer (RAFT) polymerization was carried out on chitosan using epoxy monomers toward elastic graft copolymer, which combined rigid backbone and flexible side chains in one macromolecule. After being cured with citric acid (catalyst‐free), a biomass‐based epoxy resins with dual network structure can be obtained. The thermal and mechanical properties of these epoxy resins could be tuned through controlling the content of cross‐linkers. Moreover, the chitosan bearing abundant amino groups not only enhanced strength of the epoxy resins, but also endowed them with proton conductivity. Overall, the epoxy resins exhibited high tensile strength and comparable proton conduction, which provides a new paradigm to design green functional materials for potential applications.
- Open Access
- 12 November 2021
- Published by Hindawi Limited in Advances in Polymer Technology
- Vol. 2021, 1-10
Supramolecular Assembly and Reversible Transition and of Chitosan Fluorescent Micelles by Noncovalent Modulation
Chitosan-based intelligent artificial systems have been of increasing interest for their biocompatibility, multifunctionality, biological activity, and low cost. Herein, we report the fabrication of supramolecular nanoparticles based on water-soluble chitosan (WCS) and 1,1 ′ ,1 ″ ,1 ″ ′ -(ethene-1,1,2,2-tetrayl)tetrakis(benzene-4,1-diyl) tetrakis(azanediyl)tetraacetic acid (TPE-(N-COOH)4), which is capable of reversible transition between polyion complexes (PICs) and hydrogen bonding complexes (HBCs) with tunable aggregation-induced emission driven by pH value. The PIC micelles could be formed via electrostatic interaction between ammonium cations and carboxylate anions under mild alkaline conditions. The formation of the micelles dramatically blocks the nonradiative pathway and enhances the fluorescence of TPE moieties, and the maximum fluorescence intensity was achieved near the isoelectric point due to the restriction of intramolecular motion. In addition, the fluorescence intensity and size of the PIC micelles exhibited a temperature response in the range from 20 to 80°C. Upon adjusting the solution pH to 2, the PIC micelles were reconstructed into hydrogen-bonding complexes while the hydrogen bonding interaction between the protonated carboxyl groups of TPE-(N-COOH)4 and chitosan. Moreover, the size of the micelles underwent a remarkable decrease, whereas the fluorescence emission was further enhanced by ~6.25-fold. The pH actuated micellar transition from PIC to HBC with tunable fluorescence performance is fully reversible. This study provides novel multifunctional materials that are of great importance for their potential application in the fields of optoelectronic devices and chemical and biomedical sensors.
- 12 November 2021
- Published by Hindawi Limited in Advances in Polymer Technology
- Vol. 2021, 1-10
Open AccessSupramolecular Assembly and Reversible Transition and of Chitosan Fluorescent Micelles by Noncovalent Modulation
Chitosan-based intelligent artificial systems have been of increasing interest for their biocompatibility, multifunctionality, biological activity, and low cost. Herein, we report the fabrication of supramolecular nanoparticles based on water-soluble chitosan (WCS) and 1,1 ′ ,1 ″ ,1 ″ ′ -(ethene-1,1,2,2-tetrayl)tetrakis(benzene-4,1-diyl) tetrakis(azanediyl)tetraacetic acid (TPE-(N-COOH)4), which is capable of reversible transition between polyion complexes (PICs) and hydrogen bonding complexes (HBCs) with tunable aggregation-induced emission driven by pH value. The PIC micelles could be formed via electrostatic interaction between ammonium cations and carboxylate anions under mild alkaline conditions. The formation of the micelles dramatically blocks the nonradiative pathway and enhances the fluorescence of TPE moieties, and the maximum fluorescence intensity was achieved near the isoelectric point due to the restriction of intramolecular motion. In addition, the fluorescence intensity and size of the PIC micelles exhibited a temperature response in the range from 20 to 80°C. Upon adjusting the solution pH to 2, the PIC micelles were reconstructed into hydrogen-bonding complexes while the hydrogen bonding interaction between the protonated carboxyl groups of TPE-(N-COOH)4 and chitosan. Moreover, the size of the micelles underwent a remarkable decrease, whereas the fluorescence emission was further enhanced by ~6.25-fold. The pH actuated micellar transition from PIC to HBC with tunable fluorescence performance is fully reversible. This study provides novel multifunctional materials that are of great importance for their potential application in the fields of optoelectronic devices and chemical and biomedical sensors.
- 20 November 2020
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 9 (4) , 1363-1373
Responsive hyaluronic acid-gold cluster hybrid nanogel theranostic systems
Tumor microenvironment responsive and self-monitored multimodal synergistic theranostic strategies can significantly improve therapeutic efficacy by overcoming biological barriers. Herein, we report a type of smart fluorescent hyaluronic acid nanogel that can respond to the reducing microenvironment and activate tumor targeting with light-traceable monitoring in cancer therapy. First, the derivative of hyaluronic acid (HA) with a vinyl group and cystamine bisacrylamide were used to synthesize bioreducible HA based nanogels via copolymerization in aqueous medium. Then, multifunctional mHA-gold cluster (mHA-GC) hybrid nanogels were successfully prepared by the in situ reduction of gold salt in the HA nanogels. The HA matrix turns the nanogels into a capsule for effective drug loading with excellent colloidal stability. Interestingly, the reducing tumor microenvironment dramatically enhanced the fluorescence signal of gold clusters in the hybrid nanogels. The highly selective cancer cell uptake and efficient intratumoral accumulation of the hybrid nanogels were demonstrated by fluorescence tracking of these nanogels. Responsive disassembly of the hybrid nanogels and drug release were triggered by excess glutathione presence in cancer cells. Moreover, in vivo and in vitro tumor suppression assays revealed that the doxorubicin-loaded hybrid nanogels exhibited significantly superior tumor cell inhibition abilities compared to free DOX. Overall, the mHA-GC hybrid nanogels emerge as a promising theranostic nanoplatform for the targeted delivery and controlled release of antitumor drugs with light-traceable monitoring in cancer treatment.
- 20 November 2020
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 9 (4) , 1363-1373
Responsive hyaluronic acid-gold cluster hybrid nanogel theranostic systems
Tumor microenvironment responsive and self-monitored multimodal synergistic theranostic strategies can significantly improve therapeutic efficacy by overcoming biological barriers. Herein, we report a type of smart fluorescent hyaluronic acid nanogel that can respond to the reducing microenvironment and activate tumor targeting with light-traceable monitoring in cancer therapy. First, the derivative of hyaluronic acid (HA) with a vinyl group and cystamine bisacrylamide were used to synthesize bioreducible HA based nanogels via copolymerization in aqueous medium. Then, multifunctional mHA-gold cluster (mHA-GC) hybrid nanogels were successfully prepared by the in situ reduction of gold salt in the HA nanogels. The HA matrix turns the nanogels into a capsule for effective drug loading with excellent colloidal stability. Interestingly, the reducing tumor microenvironment dramatically enhanced the fluorescence signal of gold clusters in the hybrid nanogels. The highly selective cancer cell uptake and efficient intratumoral accumulation of the hybrid nanogels were demonstrated by fluorescence tracking of these nanogels. Responsive disassembly of the hybrid nanogels and drug release were triggered by excess glutathione presence in cancer cells. Moreover, in vivo and in vitro tumor suppression assays revealed that the doxorubicin-loaded hybrid nanogels exhibited significantly superior tumor cell inhibition abilities compared to free DOX. Overall, the mHA-GC hybrid nanogels emerge as a promising theranostic nanoplatform for the targeted delivery and controlled release of antitumor drugs with light-traceable monitoring in cancer treatment.