Santanu Malakar

The study addressed the growing demand for healthier fat alternatives by formulating rice bran oil‐based oleogels using beeswax as an organogelator. This research was conducted to optimize formulation using conventional and ultrasonication processes to enhance rheological and functional characteristics, as well as thermal stability, for the development of bakery products. The optimum conditions for conventional oleogel preparation were 10.02% beeswax, 89.99°C heating, and 5°C cooling, while ultrasonication‐assisted oleogels exhibited optimum performance at 45.45% amplitude and 10.15 min sonication time. The optimization targeted improved oil binding capacity (OBC), rheological characteristics, and textural properties of the formulated oleogel. The OBC values reached 99.39% (conventional) and 99.61% (ultrasonicated), demonstrating excellent structural stability. Moreover, ultrasonication significantly enhanced gel strength, hardness, and thermal stability (DSC analysis) without altering chemical integrity (FTIR spectral analysis). Gas chromatography (GC) indicated that the oleogels retained the unsaturated fatty acid profile of rice bran oil‐based oleogel. The application of cookies development revealed that oleogels could successfully replace saturated fats, with ultrasonicated variants offering superior texture, stability, and slightly higher hardness. Sensory evaluation demonstrated that the developed oleogels were comparable to butter‐based controls in appearance, texture, flavor, and overall acceptability, indicating their potential as a viable fat replacer in bakery products without compromising consumer perception. Overall, the study established beeswax–rice bran oil oleogels, particularly ultrasonicated formulations, as sustainable, functional, and nutritionally superior fat replacers for thermally processed foods.

The research aims to enhance the characteristics of honey by incorporating xanthan gum (XG) and guar gum (GG) at various concentrations (0.5–2.0% w/w) and preparing a honey gel matrix (HGM) through high-shear homogenization. This approach serves as a substitute for fat-based filling materials commonly used in bakery products. The study encompassed an investigation of the rheological characteristics (steady and dynamic), total phenolic content (TPC), antioxidant activity, and baking stability of the HGMs. The concentration of the gums used significantly influenced the transformation of honey into the HGM and its stability. Notably, the XG-HGM demonstrated greater shear thinning behavior and higher consistency compared to the GG-HGM. Herschel Bulkley and power law models were found to be the best-fitted models for XG-HGM and GG-HGM, respectively. Furthermore, both XG-HGM and GG-HGM exhibited a higher viscous component ( G ″) than an elastic component ( G ′) at low concentrations, up to 1% (w/w) for XG-HGM and 1.5% (w/w) for GG-HGM; however, this behavior reversed beyond those concentrations ( G ′ > G ″). The XG-HGM exhibited lower temperature sensitivity compared to GG-HGM, indicating better stability under varying heat conditions. Moreover, both TPC and antioxidant activity decreased with increasing concentrations of both gums. The XG-HGM achieved the highest baking stability index, reaching 95.23% at a 2% concentration. This modified HGM formulated with XG demonstrated superior consistency, color retention, and exceptional baking stability, making it a promising candidate for application as a filling material in the bakery sector. Its improved stability and quality can facilitate the development of a wide range of baking products in the food industry.

Herbal plants comprise potent bioactives, and they have a potential for the development of functional foods. Ultrasonication technology can be used to enhance the efficiency and quality of these bioactivities. The present review discussed the ultrasound-assisted novel extraction technologies (supercritical carbon dioxide (CO₂) and high pressurized liquid), including mechanistic understanding, influencing factors, extract process efficiency, and the recovery of bioactives with an industrial perspective. The strong observations of this study are the novel ultrasound-induced extraction process variables, such as ultrasound amplitude, sonication time, temperature, solid-solvent ratio, and pressure, are significantly influenced and must be optimized for maximum recovery of bioactives. The novel green technologies (ultrasound and assisted) could remarkably improve the extraction efficiency and enhance the quality of green extract. This review will support technological understanding about the impact on process parameters for the extraction of bioactives for the development of functional foods and nutraceuticals.

Drying is an energy-intensive process that can be reduced by the application of pretreatment prior to drying to enhance mass transfer and minimize energy consumption. This review summarizes the mechanistic aspects and applications of emerging pretreatment approaches, namely ohmic heating (OH), ultrasound (US), high pressure processing (HPP), and pulsed electric field (PEF), with emphasis on the enhancement of mass transfer and quality attributes of foods. Novel pretreatments significantly improved the drying efficiency by increasing mass transfer, cavitation, and microchannel formation within the cell structure. Various processing parameters have great influence on the drying performance and quality attributes of foods. Several studies have shown that novel pretreatments (individual and combined) can significantly save energy while improving the overall drying performance and retaining the quality attributes. This work would be useful for understanding the mechanisms of novel pretreatment technologies and their applications for future commercial research and development activities.

This research aims to investigate the effect of different drying methods on the phytochemical compounds of grapefruit peels and the subsequent optimization of ultrasonicated assisted extraction conditions for bioactive compounds. Based on the maximum retention of phenolic compounds and naringin content, the hot air‐drying approach was selected for optimization of extraction process. The Box–Behnken design was used for ultrasonic‐assisted extraction (UAE) of bioactive compounds from hot air‐dried peel powder. Three factors such as solvent concentration (SC), ultrasonic amplitude (UA), and sonication time (ST) were considered for optimize the extraction condition based on total phenolic content (TPC), total flavonoid content (TFC), naringin content, and total antioxidant activities (TAA). UV‐spectrophotometric and HPLC was used for the determination in this study. The results revealed that UA and ST had significant effects on all the extraction responses. Based on the numerical optimization, the optimum extraction condition was found to be 48% (v/v) ethanol concentration, 40% ultrasonic amplitude, and 13 min sonication time. The respective optimum phytochemicals and antioxidant activity responses were obtained as TPC (78.5 mg GAE/g dw), TFC (53.5 mg naringin/g dw), naringin content (40.8 mg/g dw), and total antioxidant activities by DPPH assay (25.5 mM Trolox/g dw), ABTS*⁺ assay (4050 mM Trolox/100 g dw) and FRAP assay (17.45 Fe [II]/g dw).Practical Applications: Fruit peels are a rich and valuable bioactive residue obtained from the various juice and beverage processing industries. Grapefruit peels are an abundant source of antioxidants and bioflavonoids such as naringin and hesperidin, which have huge potential as a functional ingredients. The optimum extraction condition obtained by this UAE technique has higher levels of polyphenolic compounds and flavonoids, particularly naringin, which shows a wide range of applications in the pharmaceutical sector and might be a way towards its effective sources of utilization in functional foods.