Dmitry M. Korshunov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Dmitry M. Korshunov has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Alexander Vladimirovich Khvostikov
Lomonosov Moscow State University
5 shared publications - Mikhail A. Boguslavskiy
Moscow State University, Moscow, Russia
5 shared publications - Andrey Serdjevich Krylov
Lomonosov Moscow State University, Moscow, Russian Federation
4 shared publications - Boris A. Sakharov
Geological Institute, Russian Academy of Sciences, Moscow, Russia
3 shared publications - Ivan Morozov
Institute of Geology of Ore Deposits, Petrography, Mineralogy and Geochemistry, Russian Academy of Science (IGEM RAS), Staromonetny Per. 35, 119017 Moscow, Russia
3 shared publications - V. B. Kurnosov
Geological Institute, Russian Academy of Sciences, Moscow, Russia
3 shared publications
Latest Publications
- Open Access
- 9 November 2026
- Published by Association for Computing Machinery (ACM)
- p. 17220-17222
PRIMO: Panoramic Reconstruction with Integrated Microscopy-Specific Optimization
- 9 November 2026
- Published by Association for Computing Machinery (ACM)
- p. 17220-17222
Open AccessPRIMO: Panoramic Reconstruction with Integrated Microscopy-Specific Optimization
- 1 April 2026
- Published by Allerton Press in Moscow University Geology Bulletin
- Vol. 81 (2) , 315-323
Problems in the Study and Classification of Mineral Resources of the Technogenic Formations
Technogenic formations resulting from the extraction and processing of solid mineral resources are not merely waste, but a new class of dynamic geological
- 1 April 2026
- Published by Allerton Press in Moscow University Geology Bulletin
- Vol. 81 (2) , 315-323
Problems in the Study and Classification of Mineral Resources of the Technogenic Formations
Technogenic formations resulting from the extraction and processing of solid mineral resources are not merely waste, but a new class of dynamic geological
- Open Access
- 13 October 2025
- Published by National University of Science and Technology MISiS in Mining Science and Technology (Russia)
- Vol. 10 (3) , 232-244
From visual diagnostics to deep learning: automatic mineral identification in polished section images
From visual diagnostics to deep learning: automatic mineral identification in polished section images
- 13 October 2025
- Published by National University of Science and Technology MISiS in Mining Science and Technology (Russia)
- Vol. 10 (3) , 232-244
Open AccessFrom visual diagnostics to deep learning: automatic mineral identification in polished section images
From visual diagnostics to deep learning: automatic mineral identification in polished section images
- 1 April 2025
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 60 (2) , 133-151
Mixed-Layer Chlorite-Corrensite Minerals in the Hydrothermally Altered Upper Pleistocene Sediments, ODP Hole 1036A, Juan de Fuca Ridge, Pacific Ocean
The article provides detailed structural and crystal-chemical characteristics of mixed-layer chlorite-corrensite minerals in R = 1. Averaged crystal-chemical formulas were obtained for the mixed-layer chlorite-corrensites and their individual chlorite and corrensite layers. It is assumed that the model with an asymmetric distribution of charges in tetrahedral sheets of 2 : 1 layers is realized in corrensite packages of natural chlorite-corrensite. All samples belong to Mg–Fe varieties of chlorite-corrensites. The most probable mechanism for the formation of chlorite-corrensites of different compositions is the dissolution of original terrigenous clay minerals during the interaction of hydrothermal fluid with terrigenous sediments and the synthesis of these mixed-layer minerals from solution.
- 1 April 2025
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 60 (2) , 133-151
Mixed-Layer Chlorite-Corrensite Minerals in the Hydrothermally Altered Upper Pleistocene Sediments, ODP Hole 1036A, Juan de Fuca Ridge, Pacific Ocean
The article provides detailed structural and crystal-chemical characteristics of mixed-layer chlorite-corrensite minerals in R = 1. Averaged crystal-chemical formulas were obtained for the mixed-layer chlorite-corrensites and their individual chlorite and corrensite layers. It is assumed that the model with an asymmetric distribution of charges in tetrahedral sheets of 2 : 1 layers is realized in corrensite packages of natural chlorite-corrensite. All samples belong to Mg–Fe varieties of chlorite-corrensites. The most probable mechanism for the formation of chlorite-corrensites of different compositions is the dissolution of original terrigenous clay minerals during the interaction of hydrothermal fluid with terrigenous sediments and the synthesis of these mixed-layer minerals from solution.
- 4 November 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (6) , 660-671
Determination of the Degree of Structural Heterogeneity of Kaolinites by the Decomposition of Their IR Spectra in the OH-Stretching Vibration Region
A new approach is proposed to assess the degree of defect density of kaolinite minerals using their IR spectra in the OH-stretching vibration region. Three linear equations were obtained that relate the ratios of spectroscopic parameters to each other: \(\frac{{A\left( {{{\nu }_{3}}} \right)}}{{A\left( {{{\nu }_{3}}} \right) + A\left( {{{\nu }_{2}}} \right)}} = - {\kern 1pt} 0.2177\frac{{FWHM\left( {{{\nu }_{1}}} \right)}}{{FWHM\left( {{{\nu }_{4}}} \right)}}\) + 1.247; \(\frac{{FWHM\left( {{{\nu }_{3}}} \right)}}{{FWHM\left( {{{\nu }_{2}}} \right)}} = - 0.5804\frac{{FWHM\left( {{{\nu }_{1}}} \right)}}{{FWHM\left( {{{\nu }_{4}}} \right)}}\) + 2.8696; \(\frac{{FWHM\left( {{{\nu }_{3}}} \right)}}{{FWHM\left( {{{\nu }_{2}}} \right)}} = 2.636\frac{{A\left( {{{\nu }_{3}}} \right)}}{{A\left( {{{\nu }_{3}}} \right) + A\left( {{{\nu }_{2}}} \right)}} - 0.4437\), where: FWHM(νi) is a full width at half maximum and A(νi) is the integral intensity of Lorentzian absorption bands at ν1 ~ 3697 cm–1, ν2 ~ 3670 cm–1, ν3 ~ 3652 cm–1 and ν4 ~ 3620 cm–1, respectively. These equations made it possible to establish criteria for decomposing the IR spectra into individual bands (νi) and determining the optimal values for the FWHM(νi) and A(νi) parameters used for calculating the contents of high-ordered kaolinite (HOK) and low-ordered kaolinite (LOK) phases in natural samples with an accuracy of ~5%.- 4 November 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (6) , 660-671
Determination of the Degree of Structural Heterogeneity of Kaolinites by the Decomposition of Their IR Spectra in the OH-Stretching Vibration Region
A new approach is proposed to assess the degree of defect density of kaolinite minerals using their IR spectra in the OH-stretching vibration region. Three linear equations were obtained that relate the ratios of spectroscopic parameters to each other: \(\frac{{A\left( {{{\nu }_{3}}} \right)}}{{A\left( {{{\nu }_{3}}} \right) + A\left( {{{\nu }_{2}}} \right)}} = - {\kern 1pt} 0.2177\frac{{FWHM\left( {{{\nu }_{1}}} \right)}}{{FWHM\left( {{{\nu }_{4}}} \right)}}\) + 1.247; \(\frac{{FWHM\left( {{{\nu }_{3}}} \right)}}{{FWHM\left( {{{\nu }_{2}}} \right)}} = - 0.5804\frac{{FWHM\left( {{{\nu }_{1}}} \right)}}{{FWHM\left( {{{\nu }_{4}}} \right)}}\) + 2.8696; \(\frac{{FWHM\left( {{{\nu }_{3}}} \right)}}{{FWHM\left( {{{\nu }_{2}}} \right)}} = 2.636\frac{{A\left( {{{\nu }_{3}}} \right)}}{{A\left( {{{\nu }_{3}}} \right) + A\left( {{{\nu }_{2}}} \right)}} - 0.4437\), where: FWHM(νi) is a full width at half maximum and A(νi) is the integral intensity of Lorentzian absorption bands at ν1 ~ 3697 cm–1, ν2 ~ 3670 cm–1, ν3 ~ 3652 cm–1 and ν4 ~ 3620 cm–1, respectively. These equations made it possible to establish criteria for decomposing the IR spectra into individual bands (νi) and determining the optimal values for the FWHM(νi) and A(νi) parameters used for calculating the contents of high-ordered kaolinite (HOK) and low-ordered kaolinite (LOK) phases in natural samples with an accuracy of ~5%.- 22 October 2024
- Published by The Russian Academy of Sciences in Litologiâ i poleznye iskopaemye
- No. 4,p. 487-512
Lithology and sedimentation conditions of the latest Cretaceous of the Klementyeva Mountain section (Eastern Crimea)
Overall study of the boundary Maastrichtian–Danian deposits of Klementyeva Mountain section (Eastern Crimea) was carried out. The lithological characteristics of carbonate, carbonate-argillaceous and clastic rocks were described in detail, the dynamic of changes in foraminifera assemblages was analyzed. For the first time, geochemical and isotopic data were obtained for this section. The stratigraphic complement of the Upper Maastrichtian and Lower Danian has been specified. Late Campanian – Early Maastrichtian age of the underlying deposits was established, for the first time. The Klementyevskaya Formation was formed in deep-sea pelagic paleoenvironments on the submerged part of the outer shelf, and the overlying Lower Danian sediments were formed in shallow waters of the inner shelf with terrigenous sedimentation and high hydrodynamic activity.
- 22 October 2024
- Published by The Russian Academy of Sciences in Litologiâ i poleznye iskopaemye
- No. 4,p. 487-512
Lithology and sedimentation conditions of the latest Cretaceous of the Klementyeva Mountain section (Eastern Crimea)
Overall study of the boundary Maastrichtian–Danian deposits of Klementyeva Mountain section (Eastern Crimea) was carried out. The lithological characteristics of carbonate, carbonate-argillaceous and clastic rocks were described in detail, the dynamic of changes in foraminifera assemblages was analyzed. For the first time, geochemical and isotopic data were obtained for this section. The stratigraphic complement of the Upper Maastrichtian and Lower Danian has been specified. Late Campanian – Early Maastrichtian age of the underlying deposits was established, for the first time. The Klementyevskaya Formation was formed in deep-sea pelagic paleoenvironments on the submerged part of the outer shelf, and the overlying Lower Danian sediments were formed in shallow waters of the inner shelf with terrigenous sedimentation and high hydrodynamic activity.
- 13 July 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (4) , 441-461
Lithology and Sedimentation Conditions of the Latest Cretaceous in the Klementyev Mountain Section (Eastern Crimea)
A comprehensive study of the Maastrichtian–Danian boundary rocks in the Klementyev Mountain section (eastern Crimea) was carried out. The lithological characteristics of carbonate, carbonate–clayey, and clastic rocks are scrutinized. The dynamic of changes in the benthic and planktonic foraminiferal assemblages is analyzed. The geochemical and isotopic data were obtained for this section for the first time. The stratigraphic range of the upper Maastrichtian and lower Danian has been specified. The late Campanian–early Maastrichtian age of the underlying rocks has been confirmed for the first time. Sediments of the Klementyev Formation were deposited in a deep-sea pelagic paleoenvironment on the submerged part of the outer shelf, whereas the overlying Lower Danian sediments were deposited in shallow waters of the inner shelf with terrigenous sedimentation and high hydrodynamic activity.
- 13 July 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (4) , 441-461
Lithology and Sedimentation Conditions of the Latest Cretaceous in the Klementyev Mountain Section (Eastern Crimea)
A comprehensive study of the Maastrichtian–Danian boundary rocks in the Klementyev Mountain section (eastern Crimea) was carried out. The lithological characteristics of carbonate, carbonate–clayey, and clastic rocks are scrutinized. The dynamic of changes in the benthic and planktonic foraminiferal assemblages is analyzed. The geochemical and isotopic data were obtained for this section for the first time. The stratigraphic range of the upper Maastrichtian and lower Danian has been specified. The late Campanian–early Maastrichtian age of the underlying rocks has been confirmed for the first time. Sediments of the Klementyev Formation were deposited in a deep-sea pelagic paleoenvironment on the submerged part of the outer shelf, whereas the overlying Lower Danian sediments were deposited in shallow waters of the inner shelf with terrigenous sedimentation and high hydrodynamic activity.
- 15 June 2024
- Published by The Russian Academy of Sciences in Litologiâ i poleznye iskopaemye
- No. 3,p. 301-316
Authigenic biotite from hydrothermally altered terrigenous sediments of the Central Hill (Escanaba Trough, Gorda Ridge, Pacific Ocean, hole ODP 1038B)
For the first time, authigenic dispersed biotite was discovered in Pleistocene terrigenous sediments of the Central Hill, located in the Escanaba Trough in the southern part of the Gorda Ridge (northeastern sector of the Pacific Ocean), which accounts for almost the entire content of fine fractions 1 μm of some samples from ODP 1038B hole. The authigenic nature of biotite is associated with the metasomatic effect of hydrothermal solution on terrigenous clay minerals after intrusion of basaltic magma in the form of laccolith with a temperature of ~1200°C. The mineral composition of fine fractions of sediments was studied using complex analytical methods, including modeling of their diffraction patterns. It has been established that the dispersed micaceous mineral (biotite) is trioctahedral, high-iron, does not swell when saturated with glycol, but contracts after heating at 550°C. It is shown that in its structure there are no foreign layers, the height and composition of which differ from the micaceous layers. The decrease in the height of micaceous layers upon heating biotite to 550°C is mainly due to a decrease in the height of 2:1 octahedra due to the difference in the Fe2+–O and Fe3+–O bond lengths as a result of the oxidation of Fe2+ cations It has been established a limit value for the coefficient of variation CV, characterizing the absence of mixed-layering in a regular structure, which should not exceed a value of 0.10.
- 15 June 2024
- Published by The Russian Academy of Sciences in Litologiâ i poleznye iskopaemye
- No. 3,p. 301-316
Authigenic biotite from hydrothermally altered terrigenous sediments of the Central Hill (Escanaba Trough, Gorda Ridge, Pacific Ocean, hole ODP 1038B)
For the first time, authigenic dispersed biotite was discovered in Pleistocene terrigenous sediments of the Central Hill, located in the Escanaba Trough in the southern part of the Gorda Ridge (northeastern sector of the Pacific Ocean), which accounts for almost the entire content of fine fractions 1 μm of some samples from ODP 1038B hole. The authigenic nature of biotite is associated with the metasomatic effect of hydrothermal solution on terrigenous clay minerals after intrusion of basaltic magma in the form of laccolith with a temperature of ~1200°C. The mineral composition of fine fractions of sediments was studied using complex analytical methods, including modeling of their diffraction patterns. It has been established that the dispersed micaceous mineral (biotite) is trioctahedral, high-iron, does not swell when saturated with glycol, but contracts after heating at 550°C. It is shown that in its structure there are no foreign layers, the height and composition of which differ from the micaceous layers. The decrease in the height of micaceous layers upon heating biotite to 550°C is mainly due to a decrease in the height of 2:1 octahedra due to the difference in the Fe2+–O and Fe3+–O bond lengths as a result of the oxidation of Fe2+ cations It has been established a limit value for the coefficient of variation CV, characterizing the absence of mixed-layering in a regular structure, which should not exceed a value of 0.10.
- 9 May 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (3) , 268-280
Authigenic Biotite from Hydrothermally Altered Terrigenous Sediments of the Central Hill (Escanaba Trough, Gorda Ridge, Pacific Ocean, ODP Hole 1038B)
Authigenic dispersed biotite was discovered for the first time in Pleistocene terrigenous sediments of the Central Hill located in the Escanaba Trough in the southern part of the Gorda Ridge (northeastern sector of the Pacific Ocean). It accounts for almost the entire content of fine fractions 2+–O and Fe3+–O bond lengths as a result of the oxidation of Fe2+ cations. It has been established that a limit value for the coefficient of variation CV should not exceed 0.10 to characterize the absence of mixed-layering in a regular structure.
- 9 May 2024
- Published by Pleiades Publishing Ltd in Lithology and Mineral Resources
- Vol. 59 (3) , 268-280
Authigenic Biotite from Hydrothermally Altered Terrigenous Sediments of the Central Hill (Escanaba Trough, Gorda Ridge, Pacific Ocean, ODP Hole 1038B)
Authigenic dispersed biotite was discovered for the first time in Pleistocene terrigenous sediments of the Central Hill located in the Escanaba Trough in the southern part of the Gorda Ridge (northeastern sector of the Pacific Ocean). It accounts for almost the entire content of fine fractions 2+–O and Fe3+–O bond lengths as a result of the oxidation of Fe2+ cations. It has been established that a limit value for the coefficient of variation CV should not exceed 0.10 to characterize the absence of mixed-layering in a regular structure.
- 31 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 38 (10) , 2134-2143
Determination of Ce and La in REE-rich ores using handheld LIBS and PLS regression
In this study, we utilized a handheld LIBS (laser-induced breakdown spectroscopy) analyzer (Z-300, SciAps) to quantitatively determine cerium and lanthanum in ores enriched with rare earth elements (REEs). Due to the complex electronic structure of REEs and their presence in laser plasma in multiple ionization stages (neutral, singly- and doubly-ionized species), determining their concentrations using a handheld instrument with relatively low spectral resolution is a challenging task for on-field quantitative analysis. Another issue is the rich emission spectrum of matrix elements of ores, which can cause strong overlapping between lines of analytes and matrixes, preventing quantitative analysis of ores. To address this issue, we employed Design of Experiment based on Latin Hypercube Sampling to construct an artificial calibration set of samples with varying REEs content. We compared univariate calibration and projection to latent structures (PLS) regression for atomic and ionic lines of REEs, as well as for molecular bands of LaO (740.5 nm). We observed a worsening of calibration due to matrix effects for LaO molecules. To validate our method, we used certified reference material of OREAS natural ore samples to simulate the real in-field application of the handheld analyzer. Our study revealed that Ce can be quantified regardless of concentration in niobium REE-rich ores with a relative error of about ±10% if the Ce II line at 462.82 nm is used, which is close to the level of quantitative accuracy. However, predicted concentrations of La in OREAS 460–465 appear to be biased by matrix effects. We conclude that the accuracy achieved in our study is mostly sufficient for qualitative analysis of uranium ores (OREAS 100a–102a). Furthermore, considering the possible matrix effects in La determination, we suggest that it is possible to use OREAS samples as a calibration set instead of artificial samples to build linear univariate regression models, as the lines employed in this study do not overlap. Our results are expected to optimize the procedure of online in-field monitoring of the mining process and provide rapid preliminary analysis for decision-making, with further, more time-consuming, and accurate analysis (e.g., using ICP-OES/MS) required as necessary.
- 31 August 2023
- Published by Royal Society of Chemistry (RSC) in Journal of Analytical Atomic Spectrometry
- Vol. 38 (10) , 2134-2143
Determination of Ce and La in REE-rich ores using handheld LIBS and PLS regression
In this study, we utilized a handheld LIBS (laser-induced breakdown spectroscopy) analyzer (Z-300, SciAps) to quantitatively determine cerium and lanthanum in ores enriched with rare earth elements (REEs). Due to the complex electronic structure of REEs and their presence in laser plasma in multiple ionization stages (neutral, singly- and doubly-ionized species), determining their concentrations using a handheld instrument with relatively low spectral resolution is a challenging task for on-field quantitative analysis. Another issue is the rich emission spectrum of matrix elements of ores, which can cause strong overlapping between lines of analytes and matrixes, preventing quantitative analysis of ores. To address this issue, we employed Design of Experiment based on Latin Hypercube Sampling to construct an artificial calibration set of samples with varying REEs content. We compared univariate calibration and projection to latent structures (PLS) regression for atomic and ionic lines of REEs, as well as for molecular bands of LaO (740.5 nm). We observed a worsening of calibration due to matrix effects for LaO molecules. To validate our method, we used certified reference material of OREAS natural ore samples to simulate the real in-field application of the handheld analyzer. Our study revealed that Ce can be quantified regardless of concentration in niobium REE-rich ores with a relative error of about ±10% if the Ce II line at 462.82 nm is used, which is close to the level of quantitative accuracy. However, predicted concentrations of La in OREAS 460–465 appear to be biased by matrix effects. We conclude that the accuracy achieved in our study is mostly sufficient for qualitative analysis of uranium ores (OREAS 100a–102a). Furthermore, considering the possible matrix effects in La determination, we suggest that it is possible to use OREAS samples as a calibration set instead of artificial samples to build linear univariate regression models, as the lines employed in this study do not overlap. Our results are expected to optimize the procedure of online in-field monitoring of the mining process and provide rapid preliminary analysis for decision-making, with further, more time-consuming, and accurate analysis (e.g., using ICP-OES/MS) required as necessary.