Morgan S. Young
Research Subjects
Morgan S. Young has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Anne M. LaPointe
Cornell University
4 shared publications - Geoffrey William Coates
Cornell University
4 shared publications - Anne Jennifer McNeil
University of Michigan
2 shared publications - Giovanni Talarico
Scuola Superiore Meridionale
2 shared publications - Samantha N. MacMillan
Cornell University
2 shared publications - Yolanda Rusconi
Scuola Superiore Meridionale, Largo San Marcellino, 80138 Naples, Italy
2 shared publications
Latest Publications
- Open Access
- 22 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (43) , 46987-46999
Cooperative Enantiomorphic-Site and Chain-End Chirality in Isoselective β-Lactone Polymerization
Polymer properties are profoundly impacted by tacticity, necessitating an understanding of the origins of stereocontrol to make high-performance materials. Recently, we reported that controlled incorporation of stereoerrors into trans-poly(3-hydroxy-2-methylbutyrate) (trans-PHMB) through the isoselective polymerization of rac-trans-3,4-dimethylpropiolactone (trans-DMPL) using racemic “sandwich” (BDI)Zn alkoxide complexes (where BDI = β-diketiminate) enables tuning of mechanical properties to match those of low-density polyethylene. However, the mechanism of stereocontrol of these catalysts was not explored. Herein, we report a thorough experimental and computational investigation uncovering a distinct manifestation of cooperative enantiomorphic-site and chain-end control, which we describe as site-mediated asymmetric chain-end control, where catalyst (Δ and Λ) and chain-end chiralities (R,R or S,S) work synergistically to influence the reaction’s stereoselectivity and rate. Experimental and computational data converge remarkably well, revealing that a Δ-catalyst with an (R,R)-chain end (Δ-RR) is isoselective 90% of the time. In contrast, a Δ-catalyst with an (S,S)-chain end (Δ-SS) is unselective. Detailed Density Functional Theory (DFT) investigations suggest molecular-level rationale for this mechanism of stereocontrol, demonstrating that chain positioning, monomer distortion, and ligand interactions work in conjunction to foster isoselectivity. Finally, DFT and kinetic modeling reveal that when polymerizing rac-trans-DMPL, the populations of Δ-RR and Δ-SS are equal and the high overall isoselectivity (mm% = 71–73%; where mm% is the percent of triads with a meso configuration across both ester linkages) of the catalyst is attributed to Δ-RR being faster than Δ-SS.
- 22 October 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (43) , 46987-46999
Open AccessCooperative Enantiomorphic-Site and Chain-End Chirality in Isoselective β-Lactone Polymerization
Polymer properties are profoundly impacted by tacticity, necessitating an understanding of the origins of stereocontrol to make high-performance materials. Recently, we reported that controlled incorporation of stereoerrors into trans-poly(3-hydroxy-2-methylbutyrate) (trans-PHMB) through the isoselective polymerization of rac-trans-3,4-dimethylpropiolactone (trans-DMPL) using racemic “sandwich” (BDI)Zn alkoxide complexes (where BDI = β-diketiminate) enables tuning of mechanical properties to match those of low-density polyethylene. However, the mechanism of stereocontrol of these catalysts was not explored. Herein, we report a thorough experimental and computational investigation uncovering a distinct manifestation of cooperative enantiomorphic-site and chain-end control, which we describe as site-mediated asymmetric chain-end control, where catalyst (Δ and Λ) and chain-end chiralities (R,R or S,S) work synergistically to influence the reaction’s stereoselectivity and rate. Experimental and computational data converge remarkably well, revealing that a Δ-catalyst with an (R,R)-chain end (Δ-RR) is isoselective 90% of the time. In contrast, a Δ-catalyst with an (S,S)-chain end (Δ-SS) is unselective. Detailed Density Functional Theory (DFT) investigations suggest molecular-level rationale for this mechanism of stereocontrol, demonstrating that chain positioning, monomer distortion, and ligand interactions work in conjunction to foster isoselectivity. Finally, DFT and kinetic modeling reveal that when polymerizing rac-trans-DMPL, the populations of Δ-RR and Δ-SS are equal and the high overall isoselectivity (mm% = 71–73%; where mm% is the percent of triads with a meso configuration across both ester linkages) of the catalyst is attributed to Δ-RR being faster than Δ-SS.
- Open Access
- 17 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (25) , 26768-26773
Leveraging Stereochemistry to Optimize the Properties of Polyhydroxyalkanoates
The recycling of low-density polyethylene (LDPE) is challenging due to difficulties with sorting and contamination, leading to environmental harm. Polyhydroxyalkanoates (PHAs) are at the forefront of high-performance biodegradable alternatives to olefinic plastics, but few offer LDPE-like properties such as low strength and crystallinity while maintaining high ductility and thermal stability. Herein, we report a series of isoenriched trans-poly(3-hydroxy-2-methylbutyrates) (trans-PHMBs) with tunable mechanical and thermal properties. These polymers were synthesized through ring-opening polymerization of racemic trans-3,4-dimethylpropiolactone (rac-trans-DMPL), sourced from C1 and C4 feedstocks, using a new class of "sandwich" C2 symmetric rac-(ArBDI*)ZnOiPr catalysts (where BDI = β-diketiminate). Variation of aromatic groups (Ar) and polymerization temperature yielded mm%s between 45-79% and melting temperatures (Tm) between 141-174 °C. trans-PHMB with intermediate isotacticities of 73 and 75 mm% exhibit similar stress-strain profiles to LDPE, indicating that these polymers have the potential to serve as higher melting, degradable substitutes for LDPE.
- 17 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (25) , 26768-26773
Open AccessLeveraging Stereochemistry to Optimize the Properties of Polyhydroxyalkanoates
The recycling of low-density polyethylene (LDPE) is challenging due to difficulties with sorting and contamination, leading to environmental harm. Polyhydroxyalkanoates (PHAs) are at the forefront of high-performance biodegradable alternatives to olefinic plastics, but few offer LDPE-like properties such as low strength and crystallinity while maintaining high ductility and thermal stability. Herein, we report a series of isoenriched trans-poly(3-hydroxy-2-methylbutyrates) (trans-PHMBs) with tunable mechanical and thermal properties. These polymers were synthesized through ring-opening polymerization of racemic trans-3,4-dimethylpropiolactone (rac-trans-DMPL), sourced from C1 and C4 feedstocks, using a new class of "sandwich" C2 symmetric rac-(ArBDI*)ZnOiPr catalysts (where BDI = β-diketiminate). Variation of aromatic groups (Ar) and polymerization temperature yielded mm%s between 45-79% and melting temperatures (Tm) between 141-174 °C. trans-PHMB with intermediate isotacticities of 73 and 75 mm% exhibit similar stress-strain profiles to LDPE, indicating that these polymers have the potential to serve as higher melting, degradable substitutes for LDPE.
- 13 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 2870-2875
Synthesis of Phenyl-Substituted Poly(3-Hydroxybutyrates) with High and Tunable Glass Transition Temperatures via Sequential Catalytic Transformations
Atactic polystyrene is a commonplace transparent thermoplastic with a high glass transition temperature (Tg ∼ 100 °C), but its nondegradable backbone leads to detrimental environmental accumulation. Poly(hydroxyalkanoates) (PHAs) have emerged as biodegradable polyester alternatives to conventional olefinic plastics, but only a few PHAs possess the high Tg values (>100 °C) characteristic of polystyrene. Herein, we report the synthesis of phenyl-substituted poly(3-hydroxybutyrates) (PhPHBs) via sequential catalytic carbonylation and zinc-mediated ring-opening polymerization (ROP). Both cis and trans isomers of α-phenyl-β-butyrolactone (α-Ph-β-BL) were synthesized and polymerized to provide 13 distinct PhPHBs of varying trans incorporation and their resulting properties were systematically studied. The PhPHBs exhibit high and tunable Tg values (104-128 °C) and high thermal stability. We anticipate this work will inform the design of future high Tg PHAs as degradable alternatives to polystyrene.
- 13 January 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (3) , 2870-2875
Synthesis of Phenyl-Substituted Poly(3-Hydroxybutyrates) with High and Tunable Glass Transition Temperatures via Sequential Catalytic Transformations
Atactic polystyrene is a commonplace transparent thermoplastic with a high glass transition temperature (Tg ∼ 100 °C), but its nondegradable backbone leads to detrimental environmental accumulation. Poly(hydroxyalkanoates) (PHAs) have emerged as biodegradable polyester alternatives to conventional olefinic plastics, but only a few PHAs possess the high Tg values (>100 °C) characteristic of polystyrene. Herein, we report the synthesis of phenyl-substituted poly(3-hydroxybutyrates) (PhPHBs) via sequential catalytic carbonylation and zinc-mediated ring-opening polymerization (ROP). Both cis and trans isomers of α-phenyl-β-butyrolactone (α-Ph-β-BL) were synthesized and polymerized to provide 13 distinct PhPHBs of varying trans incorporation and their resulting properties were systematically studied. The PhPHBs exhibit high and tunable Tg values (104-128 °C) and high thermal stability. We anticipate this work will inform the design of future high Tg PHAs as degradable alternatives to polystyrene.
- 14 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 18032-18040
Highly Enantioselective Polymerization of β-Butyrolactone by a Bimetallic Magnesium Catalyst: An Interdependent Relationship Between Favored and Unfavored Enantiomers
Herein, we report that (S,S)-prophenolMg2(μ-OnBu)(THF)2 ((S,S)-1, prophenol = (S,S)-2,6-bis[2-(hydroxydiphenylmethyl)pyrrolidin-1-ylmethyl]-4-methylphenol) is a highly enantioselective (kR/kS = 140) precatalyst for ring-opening polymerization of rac-β-butyrolactone (β-BL) to isotactic poly(3-hydroxybutyrate) (i-PHB), a high performance, biodegradable polyester. Precatalyst (S,S)-1 polymerizes (R)-β-BL with an inversion of stereochemistry to (S)-PHB with a m% (percentage of adjacent linkages with a meso configuration) of 98% at 41% conversion and Tm of 165 °C under a variety of conditions. Complex (S,S)-1 demonstrates unique polymerization kinetics, as it does not polymerize the preferred enantiomer, (R)-β-BL, alone. Mechanistic studies revealed that (S)-β-BL is needed to convert (S,S)-1 into the active enantioselective polymerization catalyst. To the best of our knowledge, (S,S)-1 produces i-PHB with the highest degree of isotacticity observed from a polymerization of rac-β-BL. This study informs the design and understanding of future enantioselective and earth-abundant metal catalysts for ring-opening polymerization of β-lactones.
- 14 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 18032-18040
Highly Enantioselective Polymerization of β-Butyrolactone by a Bimetallic Magnesium Catalyst: An Interdependent Relationship Between Favored and Unfavored Enantiomers
Herein, we report that (S,S)-prophenolMg2(μ-OnBu)(THF)2 ((S,S)-1, prophenol = (S,S)-2,6-bis[2-(hydroxydiphenylmethyl)pyrrolidin-1-ylmethyl]-4-methylphenol) is a highly enantioselective (kR/kS = 140) precatalyst for ring-opening polymerization of rac-β-butyrolactone (β-BL) to isotactic poly(3-hydroxybutyrate) (i-PHB), a high performance, biodegradable polyester. Precatalyst (S,S)-1 polymerizes (R)-β-BL with an inversion of stereochemistry to (S)-PHB with a m% (percentage of adjacent linkages with a meso configuration) of 98% at 41% conversion and Tm of 165 °C under a variety of conditions. Complex (S,S)-1 demonstrates unique polymerization kinetics, as it does not polymerize the preferred enantiomer, (R)-β-BL, alone. Mechanistic studies revealed that (S)-β-BL is needed to convert (S,S)-1 into the active enantioselective polymerization catalyst. To the best of our knowledge, (S,S)-1 produces i-PHB with the highest degree of isotacticity observed from a polymerization of rac-β-BL. This study informs the design and understanding of future enantioselective and earth-abundant metal catalysts for ring-opening polymerization of β-lactones.
- Open Access
- 20 March 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (16) , 5802-5813
Revisiting poly(vinyl chloride) reactivity in the context of chemical recycling
An overview of PVC functionalization through the lens of chemical recycling.
- 20 March 2024
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 15 (16) , 5802-5813
Open AccessRevisiting poly(vinyl chloride) reactivity in the context of chemical recycling
An overview of PVC functionalization through the lens of chemical recycling.
- 28 December 2020
- Published by Wiley in Journal of Polymer Science
- Vol. 59 (3) , 268-273
Air‐tolerant poly(3‐hexylthiophene) synthesis via catalyst‐transfer polymerization
The discovery of catalyst‐transfer polymerization and its further developments have led to unprecedented control over the length and sequence of conjugated polymers. However, the methods themselves are technically challenging to perform due to the air‐ and moisture‐sensitivities of the monomers and catalysts. Herein, we report a catalyst‐transfer polymerization method that affords poly(3‐hexylthiophene) in high yields without using an inert atmosphere. The synthesis capitalizes on a rapid Negishi cross‐coupling using a moisture‐tolerant organozinc monomer mediated by an air‐stable Pd precatalyst. This simple method should make conjugated polymer synthesis more accessible to a broader range of researchers and may be generalizable to other monomer scaffolds.
- 28 December 2020
- Published by Wiley in Journal of Polymer Science
- Vol. 59 (3) , 268-273
Air‐tolerant poly(3‐hexylthiophene) synthesis via catalyst‐transfer polymerization
The discovery of catalyst‐transfer polymerization and its further developments have led to unprecedented control over the length and sequence of conjugated polymers. However, the methods themselves are technically challenging to perform due to the air‐ and moisture‐sensitivities of the monomers and catalysts. Herein, we report a catalyst‐transfer polymerization method that affords poly(3‐hexylthiophene) in high yields without using an inert atmosphere. The synthesis capitalizes on a rapid Negishi cross‐coupling using a moisture‐tolerant organozinc monomer mediated by an air‐stable Pd precatalyst. This simple method should make conjugated polymer synthesis more accessible to a broader range of researchers and may be generalizable to other monomer scaffolds.