Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jakub Szymiczek has a total of 9 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Economic and Energy Efficiency of Bivalent Heating Systems in a Retrofitted Hospital Building: A Case Study

    by Jakub Szymiczek, Krzysztof Szczotka, Piotr Michalak, Radosław Pyrek, Ewa Chomać-Pierzecka

    This case study evaluates the economic and energy efficiency of retrofitting a hospital heating system in Krakow, Poland, by transitioning from a district-heating-only model to a bivalent hybrid system. The analyzed configuration integrates air-to-water heat pumps (HP), a 180 kWp photovoltaic (PV) installation, and a 120 kWh battery energy storage (ES) unit, while retaining the municipal district heating network as a peak load and backup source. Utilizing high-resolution quasi-steady-state simulations in Ebsilon Professional (10 min time step) and projected 2025 market data, the study compares three modernization scenarios differing in heat pump capacity (20, 40, and 60 kW). The assessment focuses on key performance indicators, including Net Present Value (NPV), Levelized Cost of Heating (LCOH), and Simple Payback Time (SPBT). The results identify the bivalent system with 40 kW thermal capacity (Variant 2) as the economic optimum, delivering the highest NPV (EUR 121,021), the lowest LCOH (0.0908 EUR/kWh), and a payback period of 11.94 years. Furthermore, the study quantitatively demonstrates the law of diminishing returns in the oversized scenario (60 kW), confirming that optimal sizing is critical for maximizing the efficiency of bivalent systems in public healthcare facilities. This work provides a detailed methodology and data that can form a basis for making investment decisions in similar public utility buildings in Central and Eastern Europe.


  • Open Access

    Simulation of Heat Pump with Heat Storage and PV System—Increase in Self-Consumption in a Polish Household

    by Jakub Szymiczek, Krzysztof Szczotka, Piotr Michalak

    The use of renewables in heat production requires methods to overcome the issue of asynchronous heat load and energy production. The most effective method for analyzing the intricate thermal dynamics of an existing building is through transient simulation, utilizing real-world weather data. This approach offers a far more nuanced understanding than static calculations, which often fail to capture the dynamic interplay of environmental factors and building performance. Transient simulations, by their nature, model the building’s thermal behavior over time, reflecting the continuous fluctuations in temperature, solar radiation, and wind speed. Leveraging actual meteorological data enables the simulation model to faithfully capture system dynamics under realistic operational scenarios. This is crucial for evaluating the effectiveness of heating, ventilation, and air conditioning (HVAC) systems, identifying potential energy inefficiencies, and assessing the impact of various energy-saving measures. The simulation can reveal how the building’s thermal mass absorbs and releases heat, how solar gains influence indoor temperatures, and how ventilation patterns affect heat losses. In this paper, a household heating system consisting of an air source heat pump, PV, and buffer tank is simulated and analyzed. The 3D model accurately represents the building’s geometry and thermal properties. This virtual representation serves as the basis for calculating heat losses and gains, considering factors such as insulation levels, window characteristics, and building orientation. The approach is based on the calculation of building heat load based on a 3D model and EN ISO 52016-1 standard. The heat load is modeled based on air temperature and sun irradiance. The heating system is modeled in EBSILON professional 16.00 software for the calculation of transient 10 min time step heat production during the heating season. The results prove that a buffer tank with the right heat production control system can efficiently increase the auto consumption of self-produced PV electric energy, leading to a reduction in environmental effects and higher economic profitability.


  • Open Access

    Energy and Ecological Concept of a Zero-Emission Building Using Renewable Energy Sources—Case Study in Poland

    by Anna Barwińska-Małajowicz, Marian Banaś, Teresa Piecuch, Radosław Pyrek, Krzysztof Szczotka, Jakub Szymiczek

    Zero-emission buildings, which do not emit CO2 or other greenhouse gases throughout their entire life cycle, play a crucial role in sustainable development and the fight against climate change. Achieving carbon neutrality in construction requires considering emissions associated with material production, construction, operation, as well as demolition and disposal. These buildings utilize energy-efficient technologies, renewable energy sources, and low-carbon materials, minimizing their environmental impact. The building sector accounts for a significant percentage of global greenhouse gas emissions, making it a key area for climate action. In Poland, where aging and energy-inefficient buildings prevail, the need for a transition towards zero-emission buildings is particularly urgent. This paper assesses the feasibility and hurdles of retrofitting existing buildings to achieve zero emissions by utilizing renewable energy systems like solar photovoltaic and heat pump technologies. The publication discusses the technical, economic, and legal aspects of this transformation, with particular emphasis on the Polish context and available support programs. The purpose of this publication is to disseminate practical knowledge and foster innovation among architects, investors, and decision-makers engaged in the development of a sustainable built environment. A key example is Net Zero Energy Buildings (NZEBs), which generate as much energy as they consume over a year through technologies such as photovoltaic panels, solar collectors, and heat pumps. NZEBs combine effective insulation, energy-efficient systems, and smart energy management to minimize consumption, and may even produce excess energy that feeds back into the grid. Despite challenges in construction and maintenance, the increasing adoption of zero-emission and NZEBs worldwide reflects their long-term ecological, economic, and health benefits. The focus of this publication is to analyze the potential for transforming standard buildings, as defined by current regulations, into zero-emission buildings powered entirely by renewable energy sources. This case study analyzes the energy potential of a residential building located in Krakow, Poland. The building’s energy efficiency potential was assessed through computer simulations using Audytor OZC software (version 7.0 Pro, Sankom), taking into account local climate conditions and building standards. The study analyzed the impact of various strategies, such as upgrading thermal insulation, using energy-efficient windows, and installing photovoltaic panels, on energy consumption and CO2 emissions.


  • Open Access

    Forecasting of Daily Heat Production in a District Heating Plant Using a Neural Network

    by Adam Maryniak, Marian Banaś, Piotr Michalak, Jakub Szymiczek

    Artificial neural networks (ANNs) can be used for accurate heat load forecasting in district heating systems (DHSs). This paper presents an application of a shallow ANN with two hidden layers in the case of a local DHS. The developed model was used to write a simple application in Python 3.10 that can be used in the operation of a district heating plant to carry out a preliminary analysis of heat demand, taking into account the ambient temperature on a given day. The model was trained using the real data from the period 2019–2022. The training was sufficient for the number of 150 epochs. The prediction effectiveness indicator was proposed. In the considered case, the effectiveness of the trained network was 85% and was better in comparison to five different regression models. The developed tool was based on an open-source programming environment and proved its ability to predict heating load.


  • Open Access

    Thermomodernization as a Mechanism for Improving Energy Efficiency and Reducing Emissions of Pollutants into the Atmosphere in a Public Utility Building

    by Krzysztof Szczotka, Anna Barwińska-Małajowicz, Jakub Szymiczek, Radosław Pyrek

    Improving energy efficiency indicators and reasonable use of energy resources in the context of the increasing demand for energy are sectors that must definitely be paid attention to. The fight against climate change must start in the construction sector, as buildings are the main consumers of energy. Saving energy through the rational use of energy sources and good thermal insulation of buildings allows you to reduce the amount of heating and/or cooling bills as well as to care for the environment by reducing emissions. This article presents aspects of improving the energy efficiency of a health clinic building in Mszana Dolna through the use of comprehensive thermal modernization of the external envelope. Thermal modernization of the most energy-intensive and leaky external partitions in the building, i.e., the external walls below and above the ground and the ventilated flat roof, managed to save 53% of the building’s thermal energy, which directly translates into lowering the building’s operating costs. We managed to achieve an improvement in energy efficiency ratios from 37% to almost 60%, and a reduction in CO2 emissions at a level of nearly 50%.


  • Open Access

    Audit-Based Energy Performance Analysis of Multifamily Buildings in South-East Poland

    by Piotr Michalak, Krzysztof Szczotka, Jakub Szymiczek

    Multifamily buildings account for about half of all residential buildings in Poland and about 70% of the urban population live in them. Most of them require thermal refurbishment. Evaluation of a building’s energy performance with the use of correlation models has been very rarely used in relation to buildings in Poland. This method is simple, fast and can improve the decision process on thermal modernisation. It is especially important at the pre-design stage of planned investments. This paper presents an attempt to develop correlations that could be used in the energy assessment of multifamily buildings. For this purpose a dataset containing of 29 audits of multifamily buildings was used. The statistical analysis was performed for buildings before and after planned refurbishment. Obtained relationships showed strong correlation between thermal demand for space heating or domestic hot water and ventilation airflow and thermal transmittance of windows (R2 > 0.6). After designed modernisation the number of strong correlations decreased. Energy for domestic hot water was correlated with the number of inhabitants (R2 = 0.6). Energy for space heating was correlated with the number of users and heated volume of a building.


  • Open Access

    Improving the Energy Efficiency of Public Utility Buildings in Poland through Thermomodernization and Renewable Energy Sources—A Case Study

    by Anna Barwińska-Małajowicz, Radosław Pyrek, Krzysztof Szczotka, Jakub Szymiczek, Teresa Piecuch

    Economical and efficient use of energy is promoted around the world as a model of conscious care for the environment in which we live. A mere change of habits in the use of energy can reduce its costs by 5% to 15%, and investments in energy-saving technologies can pay for themselves after just a few years. This case study shows how significant steps can be taken in saving energy in the building of public utility buildings through deep thermomodernization using renewable energy sources—compressor heat pumps and photovoltaics. The article presents a comprehensive thermomodernization of a school building made according to Polish regulations. A detailed description of the tested object is given, and the calculation procedure is described. Next, the optimal investment variant and ex post analysis are described. The implementation of these projects significantly improved the energy efficiency of the building and generated final energy savings of 80%, which will significantly reduce the school’s operating costs. Thanks to the applied improvements, it was possible to save 72.30% of thermal energy in the building, which directly translates into lowering the building’s operating costs. The improvement of energy efficiency indicators ranges from 66% for usable energy to almost 85% for non-renewable primary energy. Furthermore, by reducing the demand for energy used in the building by nearly 74%, we see a reduction in CO2 emissions. The methods used were desk research and an extended case study of Poland, a country facing a number of problems related to energy prices during the energy crisis. In this article, we identify the challenges faced by Poland due to its geopolitical situation, and the solutions introduced to the difficult situation in the energy market come in the form of the thermomodernization of buildings. It was on this basis that Poland was selected as a case study.


  • Open Access

    Efficiency of a Compressor Heat Pump System in Different Cycle Designs: A Simulation Study for Low-Enthalpy Geothermal Resources

    by Jakub Szymiczek, Krzysztof Szczotka, Marian Banaś, Przemysław Jura

    The development of district heating systems results in a search for alternative heat sources. One of these is low-enthalpy geothermic energy, more available than traditional geothermal energy. However, utilization of these resources is difficult, due to the low quality of the produced heat. To utilize them, the heat pump system can be used. Such a system was designed for this case study of a city in a region of the Polish Lowlands. The data necessary for the design came from the project of the borehole and operational parameters of the existing heating plant. Four heat pump-cycle designs were proposed, modeled, and simulated using Ebsilon software. Afterward, the designs were optimized to achieve maximum coefficient of performance (COP) value. As a result of the simulation, the efficiency of each design was determined and the seasonal COP value was calculated with the annual measured heat demand of the plant. The system based on the cascade design proved the most efficient, with a seasonal COP of 7.19. The seasonal COP for the remaining basic, subcooling, and regenerator variants was 5.61, 3.73, and 5.60, respectively. The annual heat production of the designed system (22,196 MWh) was calculated based on the thermal power of the designed system and historical demand data. This paper presents a simulation methodology for assessment of the efficiency and feasibility of a heat pump system in district heating.


  • Open Access

    Energy Effectiveness or Economic Profitability? A Case Study of Thermal Modernization of a School Building

    by Piotr Michalak, Krzysztof Szczotka, Jakub Szymiczek

    Thermal refurbishment of buildings results in certain energy, financial, and environmental effects. Such investments are financially supported in Poland after meeting the legally defined conditions of thermal protection and energy consumption. This paper presents a complex thermal modernization of a school building, performed by following Polish regulations. A detailed description of the studied object was given, and the calculation procedure was described. Then an optimal variant of an investment and an ex-post analysis were described. Simple payback time (SPBT) of modernization measures was from 15.8 years (insulation of the ceiling under the unheated attic) to 87 years for insulation of the wooden external wall, with 35.6 years for the whole project, which is shorter than the predicted lifespan of the whole building (50–70 years). Annual calculated heating demand decreased from 464.78 to 168.73 GJ, resulting in the primary energy consumption indicator (EP) of 484.44 and 129.46 kWh/m2, respectively. Thermal refurbishment with the replacement of an old boiler into a new wood-pellet one resulted in a significant reduction of SO2 and dust emissions from 451 to 27.5 kg and from 399 to 13 kg, respectively.


  • Air Density Measuring Device - Innovative Design, Calibration and Exemplary Results

    by Jakub Szymiczek

    Air density is a parameter used in numerous applications. Its correct determination can have a key impact on the outcome of an experiment. In calculation of the drag coefficient or pneumatic piping energy loss air density value is crucial for obtaining accurate results. In order to precisely measure this parameter, the electronic air density measuring device was designed and built. The following article presents design, construction, calibration and tests of the mentioned device. The device was designed with a target of reaching set assumptions. It was constructed with open-source programming environment and easily accessible components. Calibration of the device’s sensors was performed in order to ensure high accuracy of results. Calibration of the humidity sensor was performed with use of saturated salt solutions. Exemplary measurement was made to ensure device performance. Created tool provides excellent and cheap fulfillment of the assumptions set in the article.