JMJulia Micallef

Julia Micallef

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Julia Micallef has a total of 44 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Maternal and co-parental experiences and satisfaction with a co-parenting breastfeeding eHealth intervention in Canada

    by Jennifer Abbass-Dick, Winnie Sun, Amber Newport, Fangli Xie, Julia Micallef, Adam Dubrowski


  • Open Access

    Defining the Nature of Augmented Feedback for Learning Intraosseous Access Skills in Simulation-Based Health Professions Education

    by Julia Micallef, Dale Button, Alvaro Uribe Quevedo, Christopher McClatchey, Lindsey King, Adam Dubrowski

    In the field of health professions education, acquiring technical skills involves three stages: 1) receiving instructions, 2) engaging in practice, and 3) receiving feedback. Simulation serves as a valuable tool that encompasses all three stages, enhancing the effectiveness of health professions education. This work focuses on feedback, which can be categorized as intrinsic (perceived by the learner through their senses) or augmented (provided by an external perspective). Augmented feedback can take the form of knowledge of results (information regarding the outcome) or knowledge of performance (information about the actions leading to the outcome). The overall objective of this work was to evaluate the perceived efficacy of these types of feedback in learning technical skills using a simulation, specifically an intraosseous access simulator, among advanced care paramedics. The primary focus of this article and the initial step towards achieving the aforementioned objective of this work was to determine the possible knowledge of results and knowledge of performance that paramedic facilitators could offer to advanced care paramedics during the use of an existing intraosseous access simulator. This research was conducted following the design-based research framework, employing a combination of design thinking and Delphi methods to generate a comprehensive list of augmented feedback, in both the form of knowledge of results and knowledge of performance, that can be provided to advanced care paramedics while learning intraosseous access skills through a simulator. The design thinking session was carried out to generate an initial inventory of augmented feedback, which was then refined through two rounds of Delphi consensus-building with paramedic experts. This process resulted in an eight-step list of feedback for knowledge of results and knowledge of performance that can be delivered to advanced care paramedics by paramedic facilitators using an intraosseous access simulator.


  • Open Access

    Development and Initial Assessment of a Novel Customized Deep Laceration Simulator for Suturing Training

    by Mithusa Sivanathan, Julia Micallef, Krystina M. Clarke, Merieme Habti, Florence Bénard, Léamarie Meloche-Dumas, Erica Patocskai, Adam Dubrowski

    Suturing of different layers, such as deep lacerations, is a challenging clinical skill for residents. Currently, there is a lack of general suturing instructions and practice in undergraduate medicine curricula which would add to the education required during residency and could be impactful to patient safety. Therefore, in order to adequately prepare trainees for clinical practice, training in suturing needs to be made more robust and executable. One way to facilitate this is to provide easy access to equipment that can offer good educational value while allowing for adequate repetition of suturing deep lacerations outside of clinical settings, similar to how it has been done for superficial lacerations. Simulation-based medical education addresses this by training residents in healthcare skills in a safe and controlled environment. Our technical report aims to describe the development and initial evaluation of a deep laceration simulator designed to train residents in suturing. The simulator was made using additive manufacturing techniques such as three-dimensional printing and silicone. Feedback on the simulator was provided by Centre Hospitalier de l'Université de Montréal clinicians from various specialties and residents. The simulator was assessed mainly as being easy to use, durable, and having anatomically accurate characteristics. The main improvements suggested were to make the skin thinner, divide the epidermis and dermis, add a fascia, and create a looser and friable layer of fat. Overall, the respondents rated the simulator as a good educational tool with a few minor adjustments.


  • Open Access

    Development and Initial Assessment of a Novel and Customized Bile Duct Simulator for Handsewn Anastomosis Training

    by Julia Micallef, Mithusa Sivanathan, Krystina M. Clarke, Merieme Habti, Florence Bénard, Léamarie Meloche-Dumas, Erica Patocskai, Adam Dubrowski

    Simulation-based medical education allows for the training and maintenance of healthcare skills in a safe and controlled environment. In this technical report, the development and initial evaluation of a bile duct anastomosis simulator are described. The simulator was developed using additive manufacturing techniques such as three-dimensional (3D) printing and silicone work. The final product was produced by maxSIMhealth, a research lab at Ontario Tech University (Oshawa, ON, Canada), and included four individual silicone bile ducts, based on the expert opinions from surgeons at the Centre Hospitalier de l'Université de Montréal (Montreal, QC, Canada), and a 3D-printed maxSIMclamp, which was described in a previous report. The evaluation was conducted by nine individuals consisting of surgeons, surgical residents, and medical students to assess the fidelity, functionality, and teaching quality of the simulator. The results from the evaluation indicate that the simulator needs to improve its fidelity by being softer, thinner, and beige. On the other hand, the results also indicate that this simulator is extremely durable and can be used as a training tool for surgical residents with some minor improvements.


  • Open Access

    Hacking Intraosseous Infusion Skills Training With 3D Printing: maxSIMIO Drilling System

    by Krystina M. Clarke, Julia Micallef, Amanpreet K. Jolly, Mithusa Sivanathan, Samyah Siraj, Dale Button, Christopher Patey, Adam Dubrowski

    Intraosseous (IO) infusion is an alternative way to access the vascular system to administer drugs and fluids, which is particularly helpful when the commonly used peripheral intravenous route is inaccessible. The IO procedure can be done using a drill that involves disinfecting the area, landmarking the insertion point, seating the needle in a firm and stable position in the bone, and then delivering a smooth fluid flush. However, in the current medical training landscape, access to commercially available IO drills such as the Arrow® EZ-IO® Power Driver (EZ-IO; Teleflex, Morrisville, North Carolina, United States) is difficult, especially for rural and remote areas, due to the high costs. Furthermore, the EZ-IO is not rechargeable and does not clearly indicate the remaining battery life, which could potentially put patients at risk during the IO procedure. This technical report aims to address these concerns by describing the development of an alternative, affordable, and reliable IO drilling system for training use: the maxSIMIO Drilling System. This system consists of a cordless and rechargeable IKEA screwdriver which connects to a conventional, hexagon-shaped 3D-printed drill bit needle adapter. Two needle adapters were created: Version A was designed to use a friction-based mechanism to couple the screwdriver with the EZ-IO training needle, while Version B relies on a magnetic mechanism. The major differences between the EZ-IO and the screwdriver are that a) the EZ-IO has only one rotation to advance the cannula while the screwdriver features both directions, b) the EZ-IO is not rechargeable while the screwdriver is, and c) the EZ-IO has a custom needle holder that can fit any EZ-IO training needle size while the screwdriver needs to have a custom needle adapter made to connect to the EZ-IO training needle. Overall, through this exploration, the features of the maxSIMIO Drilling System in comparison to the EZ-IO appear more accessible for IO training. Future considerations for this development include gathering clinical expertise through rigorous testing of this novel system.

  • Open Access

    Development of Simple and Advanced Adult Proximal Tibia Simulators for a Decentralized Simulation-Based Education Model to Teach Paramedics-in-Training the Intraosseous Infusion Procedure

    by Mithusa Sivanathan, Luz Yanguez Franco, Shitij Joshi, Julia Micallef, Dale Button, Adam Dubrowski

    During the COVID-19 pandemic, public health had advised practicing social distancing which led to the temporary shutdown of simulation laboratories or centralized simulation-based education model, shared spaces that healthcare workers such as paramedics use to train on important hands-on clinical skills for the job. One such skill is intraosseous (IO) access and infusion, the delivery of fluids and medication through the marrow or medullary cavity of the bone which provides fast and direct entry into the central venous system. This skill is critical in emergencies when peripheral access is not immediately available. To continue the training of paramedics in life-saving skills like IO infusion in the post-pandemic era, a decentralized simulation-based education (De-SBE) model was proposed. The De-SBE relies on the availability of inexpensive and flexible simulators that can be used by learners outside of the simulation laboratory. However, to date, there is a paucity of simulation design methods that stimulate creativity and ideation, and at the same time, provide evidence of validity for these simulators. Our exploratory research aimed to test a novel approach that combines components of development-related constraints, ideation, and consensus (CIC) approach to develop and provide content validity for simulators to be used in a De-SBE model. The development of the IO simulators was constrained to follow a design-to-cost approach. First, a modified design thinking session was conducted with three informants from paramedicine and medicine to gather ideas for the development of two IO simulators (simple and advanced). Next, to sort through, refine, and generate early evidence of the content validity of the simulators, the initial ideas were integrated into a two-round, modified Delphi process driven by seven informants from paramedicine and medicine. In addition, we surveyed the participants on how well they liked the CIC approach. The CIC approach generated a list of mandatory and optional features that could be added to the IO simulators. Specifically, six features (one mandatory and four optional) for the existing simple IO simulator and eight (three mandatories and five optional) for the advanced IO simulators were identified. Following a design-to-cost approach, the features classified as mandatory for the simple and advanced IO simulators were integrated into the final designs to maintain the feasibility of production for training purposes. The surveys with the participants showed that the CIC approach worked well in the group setting by allowing for various perspectives to be shared freely and ending with a list of features for IO simulator designs that could be used in the future. Some improvements to the approach included flagging for potential users to determine what works best concerning the mode of delivery (online or in person), and duration of the stages to allow for more idea generation. The CIC approach led to the manufacturing of simple and advanced IO simulators that would suit a training plan catered to teach the IO access and infusion procedure decentrally to paramedics-in-training. Specifically, they have been designed in a manner that allows them to be made easily accessible to the trainees i.e., low costs and high mobility, and work cohesively with online learning management systems which further facilitates the use of a De-SBE model.


  • Open Access

    Hands-On Practice on Sustainable Simulators in the Context of Training for Rural and Remote Practice Through a Fundamental Skills Workshop

    by Samyah Siraj, Mithusa Sivanathan, Sandy Abdo, Julia Micallef, Bruno Gino, Dania Buttu, Krystina M. Clarke, Marvin Mnaymneh, Andrei Torres, Gordon Brock, et al.

    Simulation-based education (SBE) is a sustainable method to allow healthcare professionals to develop competencies in clinical skills that can be difficult to maintain in rural and remote settings. Simulation-based skills training is necessary for healthcare professionals that experience difficulties accessing skills development and maintenance courses to address the needs of rural communities. However, simulators, a key element of simulation, are often prohibitively expensive and follow a “one-size-fits-all” approach. Using additive manufacturing (AM) techniques, more specifically three-dimensional (3D) printing, to produce inexpensive yet functional and customizable simulators is an ideal solution for learners to practice and improve their procedural skills anywhere and anytime. AM allows for the customization of simulators to fit any context while reducing costs and is an economic solution that moves away from the use of animal products to a more ethical, sustainable method for training. This technical report describes the delivery of a fundamental skills workshop to provide hands-on training to rural and remote healthcare professionals using 3D-printed simulators purposefully designed following design-to-cost principles. The workshop was delivered at a three-hour session hosted at a rural and remote medicine course in Ottawa, Canada. The workshop consisted of four technical skills: suturing, cricothyrotomy, episiotomy, and intraosseous infusion (tibial) (IO) and used a blended learning approach to train healthcare professionals and trainees who practice in rural and remote areas. In addition, the learners were granted access to a custom-designed learning management system, which provided a repository of instructional materials, and enabled them to record and upload personal practice sessions, review other learners' practice sessions, collaborate, and provide feedback to other learners. The feedback collected from participants, instructors, and observations on the delivery of the workshop will help improve the structure and training provided to learners. The delivery of this workshop annually is an ideal solution to ensure parsimonious delivery of simulation training for rural and remote healthcare professionals.


  • Open Access

    Application of 3D Printing in Training Health Care Providers; the Development of Diverse Facial Overlays for Simulation-Based Medical Training

    by Julia Micallef, Anusha Broekhuyse, Sanjana Vuyyuru, Randy Wax, S K. Sridhar, Jane Heath, Suhair Clarke, Adam Dubrowski

    The medical simulation manikins used by healthcare learners provide the training of numerous clinical skills but often lack diversity with respect to race, ethnicity, age, and sex. Having a diverse medical education environment is imperative for exposing learners to the diverse population of patients they may encounter when in practice. In this technical report, the development of diverse and cost-effective facial overlays produced using 3D scanning, 3D printing, and silicone to be used on top of the current medical manikins at Lakeridge Health Hospital (Oshawa, Ontario, Canada) is described. To obtain consistent feedback throughout the development process, an advisory committee was consulted monthly at Lakeridge Health Hospital. The process began by determining that two facial overlays would be developed based on the two groups that represent the highest percentage of visible minorities in the Durham Region (Ontario, Canada). Facial overlays representing the South Asian (31.8%) and Black (29.6%) races were chosen. To prevent the generalizability of the facial features of these two races, volunteers who identified as specific ethnicities (East Indian and Jamaican) within each race were selected. To add variation in age for the facial overlays, the East Indian facial overlay was edited to represent an adolescent teenager (15 to 17 years old) and the Jamaican overlay was edited to represent an elderly citizen (over 60 years old). The facial overlays were developed from the 3D scans of the two volunteers and were used to create the design of 3D printed molds, in which silicone was poured in. Pigments were added to the silicone to match the skin tones of the two volunteers, and these specific tones were used as the base color for each facial overlay. Details, such as wrinkles, eyebrows, and lip color, were painted on top of the base using additional pigmented silicone. Additionally, neck overlays were created to provide continuity of the skin tone of the facial overlay. To retain the functionality of the medical manikins, the eyes of the facial overlays were cut out, and the mouth was cut open to allow for intubation training. For stability purposes, Velcro attachments were added to the facial and neck overlays so that they could be secured onto the medical manikins. Overall, the costs to manufacture both facial overlays resulted in CAD 235.65, including local taxes. Once manufactured, both facial overlays were tested by medical students (n=18) during two separate advanced cardiovascular life support (ACLS) training sessions in the local, hospital-based simulation laboratory at Lakeridge Health Hospital. The feedback obtained suggested a need to improve the functionality of the facial overlays by making the mouths bigger and less stiff for easier intubation. However, the overlays were accepted overall as a means to add diversity to the current medical manikins. In the end, cost-effective and diverse facial overlays were created to be used on top of the medical manikins that are currently being used by healthcare learners at Lakeridge Health Hospital.


  • Open Access

    From Centralized to Decentralized Model of Simulation-Based Education: Curricular Integration of Take-Home Simulators in Nursing Education

    by Brenda Barth, Artur Arutiunian, Julia Micallef, Mithusa Sivanathan, Zhujiang Wang, Dana Chorney, Elaine Salmers, Janet McCabe, Adam Dubrowski

    In a centralized model of simulation-based education (Ce-SBE), students practice skills in simulation laboratories, while in a decentralized model (De-SBE), they practice skills outside of these laboratories. The cost of “take-home” simulators is a barrier that can be overcome with additive manufacturing (AM). Our objective was to develop and evaluate the quality of education when year one nursing students practiced clinical skills from home following normal curricular activities but in the De-SBE format. A group of expert educators, designers, and researchers followed a two-cycle, iterative design-to-cost approach to develop three simulators: wound care and urethral catheterization (male and female). The total cost of manufacturing all three simulators was USD 5,000. These were sent to all year one nursing students who followed an online curriculum. Twenty-nine students completed the survey, which indicated that the simulators supported the students’ learning needs, and several changes were requested to improve the educational value. The results indicate that substituting traditional simulators with AM-simulators provided an acceptable alternative for nursing students to learn wound care and urethral catheterization off-campus in De-SBE. The feedback also provided suggestions to improve each of the simulators to make the experience more authentic.


  • Open Access

    The Development and Initial End-Point User Feedback of a 3D-Printed Adult Proximal Tibia IO Simulator

    by Mithusa Sivanathan, Julia Micallef, Krystina M. Clarke, Bruno Gino, Shitji Joshi, Sandy Abdo, Dania Buttu, Marvin Mnaymneh, Samyah Siraj, Andrei Torres, et al.

    Intraosseous infusion (IO) remains an underutilized technique for obtaining vascular access in adults, despite its potentially life-saving benefits in trauma patients. In rural and remote areas, shortage of training equipment and human capacity (i.e., simulators) are the main contributors to the shortage of local training courses aiming at the development and maintenance of IO skills. Specifically, current training equipment options available for trainees include commercially available simulators, which are often expensive, or animal tissues, which lack human anatomical features that are necessary for optimal learning and pose logistical and ethical issues related to practice on live animals. Three-dimensional (3D) printing provides the means to create cost-effective, anatomically correct simulators for practicing IO where existing simulators may be difficult to access, especially in remote areas. This technical report aims to describe the development of maxSIMIO, a 3D-printed adult proximal tibia IO simulator, and present feedback on the design features from a clinical co-design team consisting of 18 end-point users. Overall, the majority of the feedback was positive and highlighted that the maxSIMIO simulator was helpful for learning and developing the IO technique. The majority of the clinical team responders also agreed that the simulator was more anatomically accurate compared to other simulators they have used in the past. Finally, the survey results indicated that on average, the simulator is acceptable as a training tool. Notable suggestions for improvement included increasing the stability of the individual parts of the model (such as tightening the skin and securing the bones), enhancing the anatomical accuracy of the experience (such as adding a fibula), making the bones harder, increasing the size of the patella, making it more modular (to minimize costs related to maintenance), and improving the anatomical positioning of the knee joint (i.e., slightly bent in the knee joint). In summary, the clinical team, located in rural and remote areas in Canada, found the 3D-printed simulator to be a functional tool for practicing the intraosseous technique. The outcome of this report supports the use of this cost-effective simulator for simulation-based medical education for remote and rural areas anywhere in the world.