Mahbubul Muttakin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mahbubul Muttakin has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Bidyut Baran Saha
International Institute for Carbon-Neutral Energy Research, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan
4 shared publications - Kyaw Thu
Department of Advanced Environmental Science and Engineering, Faculty of Engineering Sciences, Kyushu University, Kasuga-koen 6-1, Kasuga, Fukuoka 816-8580, Japan
4 shared publications - Animesh Pal
Department of Nuclear Engineering, University of Dhaka, Dhaka, Bangladesh
3 shared publications Bidyut Baran Saha
3 shared publications- Kazuhide Ito
Faculty of Engineering Sciences, Kyushu University, Fukuoka 816-8580, Japan
3 shared publications Sourav Mitra
2 shared publications
Latest Publications
- Open Access
- 1 March 2026
- Published by KEAI Publishing in Energy Storage and Saving
- Vol. 5 (1) , 57-71
Improvement in energy conservation and thermal stability of a refrigerator through integration of phase change materials: a CFD analysis
- 1 March 2026
- Published by KEAI Publishing in Energy Storage and Saving
- Vol. 5 (1) , 57-71
Open AccessImprovement in energy conservation and thermal stability of a refrigerator through integration of phase change materials: a CFD analysis
- 1 June 2021
- Published by Elsevier in International Journal of Refrigeration
- Vol. 126, 222-237
Study on optimized adsorption chiller employing various heat and mass recovery schemes
- 1 June 2021
- Published by Elsevier in International Journal of Refrigeration
- Vol. 126, 222-237
Study on optimized adsorption chiller employing various heat and mass recovery schemes
- Top Cited PapersOpen Access
A Statistical Approach to Determine Optimal Models for IUPAC-Classified Adsorption Isotherms
Adsorption heat transformation (AHT) systems can play a major role in protecting our environment by decreasing the usage of fossil fuels and utilizing natural and alternative working fluids. The adsorption isotherm is the most important feature in characterizing an AHT system. There are eight types of International Union of Pure and Applied Chemistry (IUPAC) classified adsorption isotherms for different “adsorbent-adsorbate” pairs with numerous empirical or semi-empirical mathematical models to fit them. Researchers face difficulties in choosing the best isotherm model to describe their experimental findings as there are several models for a single type of adsorption isotherm. This study presents the optimal models for all eight types of isotherms employing several useful statistical approaches such as average error; confidence interval (CI), information criterion (ICs), and proportion tests using bootstrap sampling. Isotherm data of 13 working pairs (which include all eight types of IUPAC isotherms) for AHT applications are extracted from literature and fitted with appropriate models using two error functions. It was found that modified Brunauer–Emmet–Teller (BET) for Type-I(a) and Type-II; Tóth for Type-I(b); GAB for Type-III; Ng et al. model for Type-IV(a) and Type-IV(b); Sun and Chakraborty model for Type-V; and Yahia et al. model for Type-VI are the most appropriate as they ensure less information loss compared to other models. Moreover; the findings are affirmed using selection probability; overall; and pairwise proportion tests. The present findings are important in the rigorous analysis of isotherm data.
Top Cited PapersOpen AccessA Statistical Approach to Determine Optimal Models for IUPAC-Classified Adsorption Isotherms
Adsorption heat transformation (AHT) systems can play a major role in protecting our environment by decreasing the usage of fossil fuels and utilizing natural and alternative working fluids. The adsorption isotherm is the most important feature in characterizing an AHT system. There are eight types of International Union of Pure and Applied Chemistry (IUPAC) classified adsorption isotherms for different “adsorbent-adsorbate” pairs with numerous empirical or semi-empirical mathematical models to fit them. Researchers face difficulties in choosing the best isotherm model to describe their experimental findings as there are several models for a single type of adsorption isotherm. This study presents the optimal models for all eight types of isotherms employing several useful statistical approaches such as average error; confidence interval (CI), information criterion (ICs), and proportion tests using bootstrap sampling. Isotherm data of 13 working pairs (which include all eight types of IUPAC isotherms) for AHT applications are extracted from literature and fitted with appropriate models using two error functions. It was found that modified Brunauer–Emmet–Teller (BET) for Type-I(a) and Type-II; Tóth for Type-I(b); GAB for Type-III; Ng et al. model for Type-IV(a) and Type-IV(b); Sun and Chakraborty model for Type-V; and Yahia et al. model for Type-VI are the most appropriate as they ensure less information loss compared to other models. Moreover; the findings are affirmed using selection probability; overall; and pairwise proportion tests. The present findings are important in the rigorous analysis of isotherm data.
- 11 June 2019
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 29 (2) , 163-179
Computational fluid dynamics modelling of the visible light photocatalytic oxidation process of toluene for indoor building materials with locally doped titanium dioxide
Computational fluid dynamics (CFD) is one of the promising methods that can precisely predict non-uniform air flow and contaminant distribution in indoor environments. The overarching objective of this study was to develop a mathematical model for describing the photocatalytic oxidation (PCO) reaction mechanism of gas phase toluene with titanium dioxide (TiO 2 )-bound indoor building materials. This mathematical model was developed based on Langmuir-Hinshelwood type kinetics and for the integration with CFD simulations as a wall surface boundary condition. The effects of gas phase toluene concentration, illuminance and humidity on the toluene oxidation reaction were considered with locally TiO 2 -doped building materials. Especially, humidity dependence was explicitly integrated as a competitive adsorption model between toluene and water vapour. Moreover, surface compositions of TiO 2 and the substrate (ceramic tile in this study), and the physical adsorption properties of those materials, were modelled and integrated into the mathematical model. A 0.02 m 3 chamber experiment and adsorption isotherm measurements were conducted to identify the model parameters. CFD analysis was carried out according to experimental scenarios, and an optimization procedure for the model parameters was proposed for their application as the boundary conditions in the CFD analysis.
- 11 June 2019
- Published by SAGE Publications in Indoor and Built Environment
- Vol. 29 (2) , 163-179
Computational fluid dynamics modelling of the visible light photocatalytic oxidation process of toluene for indoor building materials with locally doped titanium dioxide
Computational fluid dynamics (CFD) is one of the promising methods that can precisely predict non-uniform air flow and contaminant distribution in indoor environments. The overarching objective of this study was to develop a mathematical model for describing the photocatalytic oxidation (PCO) reaction mechanism of gas phase toluene with titanium dioxide (TiO 2 )-bound indoor building materials. This mathematical model was developed based on Langmuir-Hinshelwood type kinetics and for the integration with CFD simulations as a wall surface boundary condition. The effects of gas phase toluene concentration, illuminance and humidity on the toluene oxidation reaction were considered with locally TiO 2 -doped building materials. Especially, humidity dependence was explicitly integrated as a competitive adsorption model between toluene and water vapour. Moreover, surface compositions of TiO 2 and the substrate (ceramic tile in this study), and the physical adsorption properties of those materials, were modelled and integrated into the mathematical model. A 0.02 m 3 chamber experiment and adsorption isotherm measurements were conducted to identify the model parameters. CFD analysis was carried out according to experimental scenarios, and an optimization procedure for the model parameters was proposed for their application as the boundary conditions in the CFD analysis.
- 1 April 2019
- Published by Elsevier in International Journal of Refrigeration
- Vol. 100, 131-140
A comprehensive study to evaluate absolute uptake of carbon dioxide adsorption onto composite adsorbent
- 1 April 2019
- Published by Elsevier in International Journal of Refrigeration
- Vol. 100, 131-140
A comprehensive study to evaluate absolute uptake of carbon dioxide adsorption onto composite adsorbent
- 25 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2062 (1) , 020002
Experimental study on the effect of adsorbent height on adsorption dynamics
This study experimentally investigated the effect of adsorbent height on adsorption dynamics for carbon dioxide gas (CO2) adsorption onto commercially available highly porous activated carbon powder, named as Maxsorb III. The experiments were conducted using a magnetic suspension adsorption measurement unit. Three different heights of the Maxsorb III adsorbent were used in the experiments. Experimental data were reported for adsorption temperatures of 30 °C and 70 °C and for 2 different pressure steps. It had been observed that the adsorption rate strongly depended on the height of the adsorbent. This signifies that the kinetic parameters obtained by the similar experimental measurements may not be directly applicable in designing an adsorption heat exchanger. The lower height of the adsorbent provided faster adsorption kinetics. Key performance parameter, such as the specific cooling capacity for an adsorption refrigeration system was also calculated from the experimental data. The results of the present study suggested that the adsorbent height needs to be considered while using kinetics parameters in designing adsorption heat exchanger..
- 25 January 2019
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2062 (1) , 020002
Experimental study on the effect of adsorbent height on adsorption dynamics
This study experimentally investigated the effect of adsorbent height on adsorption dynamics for carbon dioxide gas (CO2) adsorption onto commercially available highly porous activated carbon powder, named as Maxsorb III. The experiments were conducted using a magnetic suspension adsorption measurement unit. Three different heights of the Maxsorb III adsorbent were used in the experiments. Experimental data were reported for adsorption temperatures of 30 °C and 70 °C and for 2 different pressure steps. It had been observed that the adsorption rate strongly depended on the height of the adsorbent. This signifies that the kinetic parameters obtained by the similar experimental measurements may not be directly applicable in designing an adsorption heat exchanger. The lower height of the adsorbent provided faster adsorption kinetics. Key performance parameter, such as the specific cooling capacity for an adsorption refrigeration system was also calculated from the experimental data. The results of the present study suggested that the adsorbent height needs to be considered while using kinetics parameters in designing adsorption heat exchanger..
- Top Cited Papers
- 1 July 2018
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 122, 795-805
Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms
- 1 July 2018
- Published by Elsevier in International Journal of Heat and Mass Transfer
- Vol. 122, 795-805
Top Cited PapersTheoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms
- 1 March 2018
- Published by Elsevier in Applied Thermal Engineering
- Vol. 133, 764-773
Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics
- 1 March 2018
- Published by Elsevier in Applied Thermal Engineering
- Vol. 133, 764-773
Study on the influence of adsorbent particle size and heat exchanger aspect ratio on dynamic adsorption characteristics
- 1 January 2014
- Published by International Organization of Scientific Research in IOSR Journal of Mechanical and Civil Engineering
- Vol. 11 (2) , 32-41
Mathematical Modelling and Experimental Validation of Solar Assisted Heat Pump System
- 1 January 2014
- Published by International Organization of Scientific Research in IOSR Journal of Mechanical and Civil Engineering
- Vol. 11 (2) , 32-41
Mathematical Modelling and Experimental Validation of Solar Assisted Heat Pump System