Ken K. Qian
Ken K. Qian has a total of 75 co-authors. Here are the top co-authors by number of shared publications:
- Norman J. Wagner
Department of Chemical and Biomolecular Engineering, University of Delaware, Newark, USA
4 shared publications - Andrew L. Zydney
Department of Chemical Engineering The Pennsylvania State University University Park Pennsylvania USA
3 shared publications Evan M. Hetrick
Eli Lilly and Company
3 shared publications- Ihita Banik3 shared publications
- Yun Liu
Center for Neutron Research, National Institute of Standards and Technology, Gaithersburg, MD, 20899, USA
3 shared publications - Alexander Edison Marras
The University of Texas at Austin
2 shared publications
Latest Publications
- 18 October 2026
- Published by Elsevier in Journal of Membrane Science
- Vol. 762
Vibration-assisted tangential flow filtration using charged membranes for production of highly concentrated siRNA formulations
- 18 October 2026
- Published by Elsevier in Journal of Membrane Science
- Vol. 762
Vibration-assisted tangential flow filtration using charged membranes for production of highly concentrated siRNA formulations
- 29 June 2026
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 23  (9) , 4392-4393
Call For Papers: Molecular Understanding and Formulation Design for Peptide Delivery
- 29 June 2026
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 23  (9) , 4392-4393
Call For Papers: Molecular Understanding and Formulation Design for Peptide Delivery
- Open Access
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20  (25) , 17972-17987
Storage Buffer Composition Impacts Internal Structure, Freeze–Thaw Stability, and Transfection Efficiency of mRNA-Lipid Nanoparticles
Messenger RNA (mRNA) lipid nanoparticles (mRNA-LNPs) are central to emerging vaccines and therapeutics, but their wide implementation is constrained by limited endosomal escape and instability during long-term storage and freezing. While buffers are routinely optimized to prevent instability, the impact of buffer on the internal structural organization of LNPs and, consequently, their delivery efficiency remain unresolved. Here, we study the impact of storage in Tris, histidine, and citrate buffers for mRNA-LNPs formulated with LP-01, MC3, and SM-102 ionizable lipids. We demonstrate that storage buffer identity and concentration govern mRNA-LNP internal ordering before and after freeze–thaw and are thus critical parameters for engineering high-performance formulations. Deconvoluting ordered phases into an mRNA-lipid region and excess lipid region reveals the importance of excess ionizable lipid behavior in enhancing endosomal escape. Prior to freezing, citrate buffer enhances transfection efficiency by promoting a transition to the fusogenic inverse hexagonal (HII) phase earlier during acidification, facilitated by a greater amount of ordered excess ionizable lipid. In contrast, Tris buffer provides the highest transfection efficiency after freeze–thaw by preventing aggregation and cargo loss while promoting favorable internal structure. Increasing Tris concentration from 10 to 50–150 mM leads to mRNA-rich bleb formation in freeze–thawed mRNA-LNPs, which improves freeze–thaw stability and thus transfection efficiency by mitigating mRNA-lipid adduct formation and accommodating a larger excess ionizable lipid region to facilitate HII phase formation. These findings establish a direct structural link between buffer conditions, particle size, internal morphology, and transfection efficiency, highlighting the importance of buffer composition in modulating mRNA-LNP performance.
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20  (25) , 17972-17987
Open AccessStorage Buffer Composition Impacts Internal Structure, Freeze–Thaw Stability, and Transfection Efficiency of mRNA-Lipid Nanoparticles
Messenger RNA (mRNA) lipid nanoparticles (mRNA-LNPs) are central to emerging vaccines and therapeutics, but their wide implementation is constrained by limited endosomal escape and instability during long-term storage and freezing. While buffers are routinely optimized to prevent instability, the impact of buffer on the internal structural organization of LNPs and, consequently, their delivery efficiency remain unresolved. Here, we study the impact of storage in Tris, histidine, and citrate buffers for mRNA-LNPs formulated with LP-01, MC3, and SM-102 ionizable lipids. We demonstrate that storage buffer identity and concentration govern mRNA-LNP internal ordering before and after freeze–thaw and are thus critical parameters for engineering high-performance formulations. Deconvoluting ordered phases into an mRNA-lipid region and excess lipid region reveals the importance of excess ionizable lipid behavior in enhancing endosomal escape. Prior to freezing, citrate buffer enhances transfection efficiency by promoting a transition to the fusogenic inverse hexagonal (HII) phase earlier during acidification, facilitated by a greater amount of ordered excess ionizable lipid. In contrast, Tris buffer provides the highest transfection efficiency after freeze–thaw by preventing aggregation and cargo loss while promoting favorable internal structure. Increasing Tris concentration from 10 to 50–150 mM leads to mRNA-rich bleb formation in freeze–thawed mRNA-LNPs, which improves freeze–thaw stability and thus transfection efficiency by mitigating mRNA-lipid adduct formation and accommodating a larger excess ionizable lipid region to facilitate HII phase formation. These findings establish a direct structural link between buffer conditions, particle size, internal morphology, and transfection efficiency, highlighting the importance of buffer composition in modulating mRNA-LNP performance.
- 22 December 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 23  (2) , 1128-1139
Characterization of Peptide–Preservative Interaction by AlphaFold, Molecular Dynamics Simulation, and NMR Spectroscopy
The arrival of novel, more effective antiobesity medications has resulted in a surge in their use in the treatment of metabolic disorders including type 2 diabetes and weight-related comorbidities. Rapid growth in product demand has been witnessed in the United States and around the world. Ensuring that patients can access such life-saving medicines is vital to public health. One notable advancement in this field is the development of multiple-dose formulations containing antimicrobial preservatives. By enabling multiple doses from a single device or container, these products reduce the overall cost per dose and ease the supply chain bottleneck that causes product shortage, making medications more affordable and accessible. Interactions between a peptide and the preservative may induce structural perturbations and, as a result, impact the stability of the product. In the current study, we introduce a computational framework to investigate the interactions between a model therapeutic incretin peptide and antimicrobial preservatives, namely, benzyl alcohol and phenol. By integrating MD simulations with NMR data, we aim to elucidate how preservatives influence the stability of the peptide in the formulations. Our findings reveal that phenol displayed a significantly higher interaction frequency with the peptide compared to benzyl alcohol, particularly at the Trp cage and hydrophobic regions along the N- and C-termini. These interactions disrupt key stabilizing hydrogen bonds and increase the level of hydrophobic surface exposure, collectively heightening the stability risk of the peptide. Furthermore, phenol exhibited higher contact frequencies for residues such as Asp15, Ile17, Leu26, and Ile27, potentially explaining the differences in chemical stability observed with phenol-rich formulations. More importantly, the insights gained from simulations were independently corroborated by experimental results. This framework offers a strategy for developing robust multiple-dose preserved peptide formulations with the desired product stability throughout the shelf life.
- 22 December 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 23  (2) , 1128-1139
Characterization of Peptide–Preservative Interaction by AlphaFold, Molecular Dynamics Simulation, and NMR Spectroscopy
The arrival of novel, more effective antiobesity medications has resulted in a surge in their use in the treatment of metabolic disorders including type 2 diabetes and weight-related comorbidities. Rapid growth in product demand has been witnessed in the United States and around the world. Ensuring that patients can access such life-saving medicines is vital to public health. One notable advancement in this field is the development of multiple-dose formulations containing antimicrobial preservatives. By enabling multiple doses from a single device or container, these products reduce the overall cost per dose and ease the supply chain bottleneck that causes product shortage, making medications more affordable and accessible. Interactions between a peptide and the preservative may induce structural perturbations and, as a result, impact the stability of the product. In the current study, we introduce a computational framework to investigate the interactions between a model therapeutic incretin peptide and antimicrobial preservatives, namely, benzyl alcohol and phenol. By integrating MD simulations with NMR data, we aim to elucidate how preservatives influence the stability of the peptide in the formulations. Our findings reveal that phenol displayed a significantly higher interaction frequency with the peptide compared to benzyl alcohol, particularly at the Trp cage and hydrophobic regions along the N- and C-termini. These interactions disrupt key stabilizing hydrogen bonds and increase the level of hydrophobic surface exposure, collectively heightening the stability risk of the peptide. Furthermore, phenol exhibited higher contact frequencies for residues such as Asp15, Ile17, Leu26, and Ile27, potentially explaining the differences in chemical stability observed with phenol-rich formulations. More importantly, the insights gained from simulations were independently corroborated by experimental results. This framework offers a strategy for developing robust multiple-dose preserved peptide formulations with the desired product stability throughout the shelf life.
- 4 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41  (45) , 30102-30115
Shear and Dilatational Rheology and Interfacial Structure of a Monoclonal Antibody Adsorbed at the Air–Liquid Interface
As amphiphiles, proteins adsorb at hydrophobic air-liquid interfaces, often forming a viscoelastic film. This surface viscoelasticity is of interest in many fields of science and technology, such as foamability and coalescence in food and emulsion science as well as stability in biopharmaceutical formulations. For example, the long-term stability of monoclonal antibody (mAb) formulations correlates with surface aggregation and interfacial shear elasticity. To investigate this viscoelastic interface, a new interfacial rheometer is used to probe the dilatational and shear rheology of an adsorbed mAb interfacial film as a function of coverage, including "jammed" interfacial states that have not been explored in previous studies. This interfacial film is primarily elastic (solid-like), and the calculated 2D Poisson ratios ν2D decrease from 0.9 to 0.4 with increasing compression. X-ray reflectivity (XRR) resolves the out-of-plane structure, and Brewster angle microscopy (BAM) measurements provide in-plane structural information on the film. BAM images confirm the homogeneity of the film upon compression, while XRR reveals a thin, high-protein concentration region at the air interface and enables accurate determination of the true surface excess. Thus, the scaling of interfacial rheology with the actual, measured surface coverage is determined. Using the Naïve mode-coupling theory, a cage-localization length rloc between 2.5 and 4.0 Å is calculated, further confirming the hypothesis that the high interfacial elasticity is due to the beta-sheet structure forming from localized, partial unfolding of mAb at the interface. These results provide a fundamental understanding of the structure-rheological property of the adsorbed mAb interfacial layer with scientific importance and technological application.
- 4 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41  (45) , 30102-30115
Shear and Dilatational Rheology and Interfacial Structure of a Monoclonal Antibody Adsorbed at the Air–Liquid Interface
As amphiphiles, proteins adsorb at hydrophobic air-liquid interfaces, often forming a viscoelastic film. This surface viscoelasticity is of interest in many fields of science and technology, such as foamability and coalescence in food and emulsion science as well as stability in biopharmaceutical formulations. For example, the long-term stability of monoclonal antibody (mAb) formulations correlates with surface aggregation and interfacial shear elasticity. To investigate this viscoelastic interface, a new interfacial rheometer is used to probe the dilatational and shear rheology of an adsorbed mAb interfacial film as a function of coverage, including "jammed" interfacial states that have not been explored in previous studies. This interfacial film is primarily elastic (solid-like), and the calculated 2D Poisson ratios ν2D decrease from 0.9 to 0.4 with increasing compression. X-ray reflectivity (XRR) resolves the out-of-plane structure, and Brewster angle microscopy (BAM) measurements provide in-plane structural information on the film. BAM images confirm the homogeneity of the film upon compression, while XRR reveals a thin, high-protein concentration region at the air interface and enables accurate determination of the true surface excess. Thus, the scaling of interfacial rheology with the actual, measured surface coverage is determined. Using the Naïve mode-coupling theory, a cage-localization length rloc between 2.5 and 4.0 Å is calculated, further confirming the hypothesis that the high interfacial elasticity is due to the beta-sheet structure forming from localized, partial unfolding of mAb at the interface. These results provide a fundamental understanding of the structure-rheological property of the adsorbed mAb interfacial layer with scientific importance and technological application.
- 15 October 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 22  (11) , 6588-6598
Characterization of Peptide-Preservative Interaction and Reversibility by NMR Spectroscopy
Incretin-based therapies have emerged as successful antiobesity medications capable of safely achieving sizable and sustained body weight loss; however, factors such as cost and patient access must be addressed in order to maximize their global impact. A multiple-dose preserved formulation, introduced as a reformulated product after its single-dose nonpreserved counterpart secures the initial regulatory approval, may address some of these challenges. In the current study, we employed 1D and 2D NMR to investigate the interactions between a model therapeutic incretin peptide and antimicrobial preservatives, i.e., benzyl alcohol and phenol. Our findings indicate that benzyl alcohol does not interact or otherwise significantly affect the model peptide, while phenol binds to the peptide and induces spectral perturbations. Furthermore, our results demonstrate that the changes caused by preservative interaction are fully reversed after the removal of the preservative. Such reversibility is crucial for understanding the potential impact to the pharmacokinetics and pharmacodynamics (PK/PD) profile after the product reformulation. Additionally, the stability and potency of the drug product were further evaluated with analytical techniques including HPLC and cell-based bioassays. The results demonstrate that despite the interaction observed by NMR, the stability and bioactivity of the model peptide remain essentially unchanged in the preserved formulation compared to the nonpreserved formulation, ensuring the therapeutic efficacy of the drug product. Learnings gleaned from these nonclinical laboratory studies are crucial in derisking any clinical bioequivalence studies needed in support of the drug product composition changes.
- 15 October 2025
- Published by American Chemical Society (ACS) in Molecular Pharmaceutics
- Vol. 22  (11) , 6588-6598
Characterization of Peptide-Preservative Interaction and Reversibility by NMR Spectroscopy
Incretin-based therapies have emerged as successful antiobesity medications capable of safely achieving sizable and sustained body weight loss; however, factors such as cost and patient access must be addressed in order to maximize their global impact. A multiple-dose preserved formulation, introduced as a reformulated product after its single-dose nonpreserved counterpart secures the initial regulatory approval, may address some of these challenges. In the current study, we employed 1D and 2D NMR to investigate the interactions between a model therapeutic incretin peptide and antimicrobial preservatives, i.e., benzyl alcohol and phenol. Our findings indicate that benzyl alcohol does not interact or otherwise significantly affect the model peptide, while phenol binds to the peptide and induces spectral perturbations. Furthermore, our results demonstrate that the changes caused by preservative interaction are fully reversed after the removal of the preservative. Such reversibility is crucial for understanding the potential impact to the pharmacokinetics and pharmacodynamics (PK/PD) profile after the product reformulation. Additionally, the stability and potency of the drug product were further evaluated with analytical techniques including HPLC and cell-based bioassays. The results demonstrate that despite the interaction observed by NMR, the stability and bioactivity of the model peptide remain essentially unchanged in the preserved formulation compared to the nonpreserved formulation, ensuring the therapeutic efficacy of the drug product. Learnings gleaned from these nonclinical laboratory studies are crucial in derisking any clinical bioequivalence studies needed in support of the drug product composition changes.
- 30 August 2025
- Published by Elsevier in Separation and Purification Technology
- Vol. 379
Effect of ligand density and properties on membrane charge for enhancing ultrafiltration of siRNA
- 30 August 2025
- Published by Elsevier in Separation and Purification Technology
- Vol. 379
Effect of ligand density and properties on membrane charge for enhancing ultrafiltration of siRNA
- 1 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17  (28) , 40116-40128
Competitive Adsorption of Monoclonal Antibodies and Nonionic Surfactants at the Air–Water Interface
Monoclonal antibodies (mAbs), due to their amphiphilicity, adsorb strongly at the air-water (a/w) interface, such that interfacial stresses can lead to the formation of visible and subvisible particles in solution that adversely affect the therapeutic efficacy and immunogenicity of protein formulations. Furthermore, prior work in our group shows that the interfacial shear elastic modulus of mAbs adsorbed at the a/w interface correlates strongly with the long-term (3 year) stability in solution, providing a possible means to accelerate the testing of formulations. To mitigate interface-induced instability in formulation and delivery, the biopharmaceutical industry employs excipients, such as nonionic surfactants, to rapidly adsorb to and protect against mAb adsorption at interfaces. However, the molecular interactions at the a/w interface during mechanical deformation are not established despite their technological importance. To address this need, the adsorption of a mAb (studied previously) at the a/w interface in the presence and absence of the nonionic surfactant Poloxamer 188 (P188) is examined through measurements of interfacial pressure and rheology, Brewster angle microscopy (BAM), and neutron reflectometry (NR). We find that mAb adsorbs rapidly to the air-water interface, but the evolution of the surface pressure and interfacial shear moduli continues long after the surface excess has reached a plateau. NR measurements quantify changes in the molecular layer when undergoing dilatational stresses, which may occur during the storage and transport of mAbs. The injection of P188 into the subphase below an established mAb interface increases the surface pressure and decreases interfacial shear moduli, but mAbs remain at the interface with a modified surface topology. Comparisons to adsorption from a premixed mAb-P188 solution highlight the importance of the order of addition in therapeutic formulations, and the results in totality provide molecular evidence for the effect of the a/w interface on mAb interactions and stability.
- 1 July 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17  (28) , 40116-40128
Competitive Adsorption of Monoclonal Antibodies and Nonionic Surfactants at the Air–Water Interface
Monoclonal antibodies (mAbs), due to their amphiphilicity, adsorb strongly at the air-water (a/w) interface, such that interfacial stresses can lead to the formation of visible and subvisible particles in solution that adversely affect the therapeutic efficacy and immunogenicity of protein formulations. Furthermore, prior work in our group shows that the interfacial shear elastic modulus of mAbs adsorbed at the a/w interface correlates strongly with the long-term (3 year) stability in solution, providing a possible means to accelerate the testing of formulations. To mitigate interface-induced instability in formulation and delivery, the biopharmaceutical industry employs excipients, such as nonionic surfactants, to rapidly adsorb to and protect against mAb adsorption at interfaces. However, the molecular interactions at the a/w interface during mechanical deformation are not established despite their technological importance. To address this need, the adsorption of a mAb (studied previously) at the a/w interface in the presence and absence of the nonionic surfactant Poloxamer 188 (P188) is examined through measurements of interfacial pressure and rheology, Brewster angle microscopy (BAM), and neutron reflectometry (NR). We find that mAb adsorbs rapidly to the air-water interface, but the evolution of the surface pressure and interfacial shear moduli continues long after the surface excess has reached a plateau. NR measurements quantify changes in the molecular layer when undergoing dilatational stresses, which may occur during the storage and transport of mAbs. The injection of P188 into the subphase below an established mAb interface increases the surface pressure and decreases interfacial shear moduli, but mAbs remain at the interface with a modified surface topology. Comparisons to adsorption from a premixed mAb-P188 solution highlight the importance of the order of addition in therapeutic formulations, and the results in totality provide molecular evidence for the effect of the a/w interface on mAb interactions and stability.
- 7 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129  (11) , 2856-2871
Growth of Clusters toward Liquid–Liquid Phase Separation of Monoclonal Antibodies as Characterized by Small-Angle X-ray Scattering and Molecular Dynamics Simulation
In concentrated protein solutions, short-range attractions (SRAs) contribute to liquid-liquid phase separation (LLPS) as a function of temperature and salinity, particularly when the charge and thus long-range repulsions are low near the isoelectric point pI. Herein, we study how SRA and solution morphology vary with the approach to LLPS from increased SRA for two monoclonal antibodies (mAbs) as salt concentration is reduced near the pI. These properties are quantified using small-angle X-ray scattering (SAXS) interpreted via coarse-grained (CG) molecular dynamics (MD) simulations and compared with less descriptive properties from static and dynamic light scattering. Experimental structure factors are fit with a library of MD simulations for a CG 12-bead mAb model to determine the SRA strength (K) and cluster size distributions. Proximity to LLPS and clustering characteristics in mAb solutions are impacted by both net charge, which are modified by pH, and the strength of anisotropic electrostatic SRA (charge-charge, charge-dipole, hydrogen bonding, etc.), which are screened and weakened by added salts. The trends in LLPS are consistent with the reduced diffusion interaction parameter kD/B22ex for dilute solutions. However, greater insight is provided with SAXS along with CG-MD simulations; in particular, the growth of clusters is observed with the approach to LLPS with decreasing salinity over a wide range of concentrations.
- 7 March 2025
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 129  (11) , 2856-2871
Growth of Clusters toward Liquid–Liquid Phase Separation of Monoclonal Antibodies as Characterized by Small-Angle X-ray Scattering and Molecular Dynamics Simulation
In concentrated protein solutions, short-range attractions (SRAs) contribute to liquid-liquid phase separation (LLPS) as a function of temperature and salinity, particularly when the charge and thus long-range repulsions are low near the isoelectric point pI. Herein, we study how SRA and solution morphology vary with the approach to LLPS from increased SRA for two monoclonal antibodies (mAbs) as salt concentration is reduced near the pI. These properties are quantified using small-angle X-ray scattering (SAXS) interpreted via coarse-grained (CG) molecular dynamics (MD) simulations and compared with less descriptive properties from static and dynamic light scattering. Experimental structure factors are fit with a library of MD simulations for a CG 12-bead mAb model to determine the SRA strength (K) and cluster size distributions. Proximity to LLPS and clustering characteristics in mAb solutions are impacted by both net charge, which are modified by pH, and the strength of anisotropic electrostatic SRA (charge-charge, charge-dipole, hydrogen bonding, etc.), which are screened and weakened by added salts. The trends in LLPS are consistent with the reduced diffusion interaction parameter kD/B22ex for dilute solutions. However, greater insight is provided with SAXS along with CG-MD simulations; in particular, the growth of clusters is observed with the approach to LLPS with decreasing salinity over a wide range of concentrations.
- 4 September 2024
- Published by Elsevier in Journal of Membrane Science
- Vol. 713
Development of charged membranes for the ultrafiltration of siRNA
- 4 September 2024
- Published by Elsevier in Journal of Membrane Science
- Vol. 713
Development of charged membranes for the ultrafiltration of siRNA