Jing Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jing Wang has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Weiwen Zou
State Key Laboratory of Photonics and Communications, Intelligent Microwave Lightwave Integration Innovation Center (imLic), Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
5 shared publications - Shaofu Xu
School of Integrated Circuits (School of Information Science and Electronic Engineering) State Key Laboratory of Photonics and Communications Intelligent Microwave Lightwave Integration Innovation Center (imLic) Shanghai Jiao Tong University 200240 Shanghai China
2 shared publications - Baode Lin
State Key Laboratory of Photonics and Communications, Intelligent Microwave Lightwave Integration Innovation Center, Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai 200240, China
1 shared publication Bowen Ma
State Key Laboratory of Advanced Optical Communication Systems and Networks, Intelligent Microwave Lightwave Integration Innovation Center (imLic), Department of Electronic Engineering, Shanghai Jiao Tong University , Shanghai 200240, China
1 shared publication- Defu Zhou
State Key Laboratory of Photonics and Communications, Intelligent Microwave Lightwave Integration Innovation Center, Department of Electronic Engineering, Shanghai Jiao Tong University, Shanghai, China
1 shared publication - Haoru Yang
State Key Laboratory of Advanced Optical Communication Systems and Networks, Intelligent Microwave Lightwave Integration Innovation Center (imLic), Department of Electronic Engineering, Shanghai Jiao Tong University , Shanghai 200240, China
1 shared publication
Latest Publications
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (21) , 9793-9811
Towards Direct Sampling of Ultra-Broadband Microwave Signals: A Review of Integrated Photonic Analog-to-Digital Converter Technologies
Photonic analog-to-digital converters (PADCs) have been investigated for nearly five decades as a promising solution for next-generation high-performance signal acquisition, thanks to their inherent advantages such as low jitter, high bandwidth, and unique multiplexing techniques. This paper reviews the fundamental principles and recent advancements in four well-known categories of PADCs based on the role of photonic technology in the signal digitization process: photonic assisted PADCs, electronic sampling and photonic quantizing PADCs, photonic sampling and electronic quantizing PADCs, and photonic sampling and quantizing PADCs. We then focus on photonic sampling and electronic quantizing PADCs, which have emerged as the most widely used architecture, owing to their rapid integration progress and practical applications in direct RF sampling. This architecture overcomes the limitations of electronic systems by achieving bandwidths exceeding 100 GHz while maintaining a resolution of 8-14 bits. The modular design, which integrates optical components like modulators, optical demultiplexers, and photodetectors with chiplet-based photonic-electronic co-packaging, holds great potential for hybrid integration and monolithic implementation. Demonstrated in direct RF sampling applications, such as radar and communication systems with >8 GHz instantaneous bandwidth, these PADCs offer a transformative solution for next-generation signal acquisition and processing. Furthermore, this paper reviews the latest integration results of these PADC architectures and their applications in radar and communication systems. In the end, acknowledging the existing challenges, we highlight potential strategies and provide insights into the future development of PADCs for integration and direct RF sampling applications.
- 28 July 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (21) , 9793-9811
Towards Direct Sampling of Ultra-Broadband Microwave Signals: A Review of Integrated Photonic Analog-to-Digital Converter Technologies
Photonic analog-to-digital converters (PADCs) have been investigated for nearly five decades as a promising solution for next-generation high-performance signal acquisition, thanks to their inherent advantages such as low jitter, high bandwidth, and unique multiplexing techniques. This paper reviews the fundamental principles and recent advancements in four well-known categories of PADCs based on the role of photonic technology in the signal digitization process: photonic assisted PADCs, electronic sampling and photonic quantizing PADCs, photonic sampling and electronic quantizing PADCs, and photonic sampling and quantizing PADCs. We then focus on photonic sampling and electronic quantizing PADCs, which have emerged as the most widely used architecture, owing to their rapid integration progress and practical applications in direct RF sampling. This architecture overcomes the limitations of electronic systems by achieving bandwidths exceeding 100 GHz while maintaining a resolution of 8-14 bits. The modular design, which integrates optical components like modulators, optical demultiplexers, and photodetectors with chiplet-based photonic-electronic co-packaging, holds great potential for hybrid integration and monolithic implementation. Demonstrated in direct RF sampling applications, such as radar and communication systems with >8 GHz instantaneous bandwidth, these PADCs offer a transformative solution for next-generation signal acquisition and processing. Furthermore, this paper reviews the latest integration results of these PADC architectures and their applications in radar and communication systems. In the end, acknowledging the existing challenges, we highlight potential strategies and provide insights into the future development of PADCs for integration and direct RF sampling applications.
- 19 August 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (8)
High-efficiency dual-level heterogenous grating coupler on CMOS-compatible silicon-lithium niobate platform
We present the design and experimental demonstration of multilayer etched CMOS-compatible grating couplers with high efficiency on a heterogeneous silicon-lithium niobate platform. The dual-level grating coupler comprises 90 nm-thick Si waveguides and 220 nm-thick Si grating with a linear chirped structure without etching LN. The design changes the grating diffraction properties, which not only reduce back reflection but also improve directionality and fiber-to-chip mode match. In comparison with existing studies, this work achieves high coupling efficiency solely through CMOS-compatible etching without additional bottom reflectors or high-index overlays. Theoretical calculations predict a fiber-to-chip coupling efficiency of −1.76 dB and an off-chip diffraction efficiency of −1.1 dB for the TE mode. The experimental measurement of the peak coupling efficiency is −2.84 dB with the back reflection as low as −26 dB. The grating coupler paves the way for monolithic integration of Si and LN.
- 19 August 2024
- Published by AIP Publishing in Applied Physics Letters
- Vol. 125 (8)
High-efficiency dual-level heterogenous grating coupler on CMOS-compatible silicon-lithium niobate platform
We present the design and experimental demonstration of multilayer etched CMOS-compatible grating couplers with high efficiency on a heterogeneous silicon-lithium niobate platform. The dual-level grating coupler comprises 90 nm-thick Si waveguides and 220 nm-thick Si grating with a linear chirped structure without etching LN. The design changes the grating diffraction properties, which not only reduce back reflection but also improve directionality and fiber-to-chip mode match. In comparison with existing studies, this work achieves high coupling efficiency solely through CMOS-compatible etching without additional bottom reflectors or high-index overlays. Theoretical calculations predict a fiber-to-chip coupling efficiency of −1.76 dB and an off-chip diffraction efficiency of −1.1 dB for the TE mode. The experimental measurement of the peak coupling efficiency is −2.84 dB with the back reflection as low as −26 dB. The grating coupler paves the way for monolithic integration of Si and LN.
- Open Access
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (1) , 1-6
Three-Dimensional Optical-Electrical-Thermal Multi-Physical Analysis and Optimization in Thin Film Lithium Niobate Based Electro-Optic Modulator
We demonstrate a three-dimensional (3D) investigation of optical-electrical-thermal multi-physical effect in thin film lithium niobate based electro-optic on-chip modulator. For the first time, the 3D visualizations of the optical field, the microwave field, and thermal field are carried out. The obtained key performances of modulator such as half wave voltage and modulation bandwidth are basically consistent with the reported experimental data. This report emphasizes on the thermal effect investigation such as the heating dissipation and steady-state temperature distribution. Besides, the dependencies of heating and temperature increment on the microwave frequency and the electrode gap are discussed quantitatively, and optimization of the modulator design is then presented from the perspective of thermal effect.
- 12 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 14 (1) , 1-6
Open AccessThree-Dimensional Optical-Electrical-Thermal Multi-Physical Analysis and Optimization in Thin Film Lithium Niobate Based Electro-Optic Modulator
We demonstrate a three-dimensional (3D) investigation of optical-electrical-thermal multi-physical effect in thin film lithium niobate based electro-optic on-chip modulator. For the first time, the 3D visualizations of the optical field, the microwave field, and thermal field are carried out. The obtained key performances of modulator such as half wave voltage and modulation bandwidth are basically consistent with the reported experimental data. This report emphasizes on the thermal effect investigation such as the heating dissipation and steady-state temperature distribution. Besides, the dependencies of heating and temperature increment on the microwave frequency and the electrode gap are discussed quantitatively, and optimization of the modulator design is then presented from the perspective of thermal effect.
- Open Access
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (1) , 1-12
A Heterogeneous Silicon on Lithium Niobate Modulator for Ultra-Compact and High-Performance Photonic Integrated Circuits
We propose a heterogeneous silicon on lithium niobate (Si-LN) modulator which improves the compactness and modulating performance of large-scale photonic integrated circuits. Two types of configurations are employed on the Si-LN wafer for ultra-compact light-routing waveguides and high-performance light-modulating waveguides, respectively. The low loss taper transfers the optical modes between the two waveguides. In the heterogeneous Si-LN modulator, LN etching is nonessential and thus device processes are supported on a robust wafer. Our design analyzes the influence of the LN thickness on the performance. According to theoretical analysis and numerical simulation, the modulator supports a bend radius of 10 μm and edge-to-edge waveguide separation of 0.7 μm with respect to ∼1 cm beat length. When thickness of LN is 700 nm, the modulation efficiency reaches 1.76 V⋅cm and the bandwidth exceeds 350 GHz. This modulator is potentially suitable for ultra-compact, large-scale, high efficiency, and large bandwidth photonic integrated circuits (PICs).
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Journal
- Vol. 13 (1) , 1-12
Open AccessA Heterogeneous Silicon on Lithium Niobate Modulator for Ultra-Compact and High-Performance Photonic Integrated Circuits
We propose a heterogeneous silicon on lithium niobate (Si-LN) modulator which improves the compactness and modulating performance of large-scale photonic integrated circuits. Two types of configurations are employed on the Si-LN wafer for ultra-compact light-routing waveguides and high-performance light-modulating waveguides, respectively. The low loss taper transfers the optical modes between the two waveguides. In the heterogeneous Si-LN modulator, LN etching is nonessential and thus device processes are supported on a robust wafer. Our design analyzes the influence of the LN thickness on the performance. According to theoretical analysis and numerical simulation, the modulator supports a bend radius of 10 μm and edge-to-edge waveguide separation of 0.7 μm with respect to ∼1 cm beat length. When thickness of LN is 700 nm, the modulation efficiency reaches 1.76 V⋅cm and the bandwidth exceeds 350 GHz. This modulator is potentially suitable for ultra-compact, large-scale, high efficiency, and large bandwidth photonic integrated circuits (PICs).
- 17 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (2) , 89-92
Optical Convolutional Neural Network With WDM-Based Optical Patching and Microring Weighting Banks
We propose an optical convolutional neural network (OCNN) architecture for high-speed and energy-efficient deep learning accelerators. The WDM-based optical patching scheme (WDM-OPS) is adopted as the data-feeding structure for its superior energy efficiency and the microring banks are used for the large-scale weighting and summing (the computing core). We thoroughly investigate the performance (including prediction accuracy, speed, and energy efficiency) of this architecture in different system defects. The results indicate that, the prediction accuracy of OCNN can reach 97% in the MNIST dataset with a computing speed of over 100 TMAC/s on condition of achievable low insertion loss. It is also observed that the WDM-OPS notably reduces the energy consumption of the electro-optic modulation and thus the OCNN becomes an exceptionally energy-efficient architecture among several well-known optical architectures. In the evaluations, instead of merely considering the computing core, we take the holistic optical system including lasers, electro-optic modulators, data preprocessing, photodetection and transimpedance amplification into consideration. Therefore, this work provides a potential guide for the systematic implementation of the OCNN architecture.
- 17 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Photonics Technology Letters
- Vol. 33 (2) , 89-92
Optical Convolutional Neural Network With WDM-Based Optical Patching and Microring Weighting Banks
We propose an optical convolutional neural network (OCNN) architecture for high-speed and energy-efficient deep learning accelerators. The WDM-based optical patching scheme (WDM-OPS) is adopted as the data-feeding structure for its superior energy efficiency and the microring banks are used for the large-scale weighting and summing (the computing core). We thoroughly investigate the performance (including prediction accuracy, speed, and energy efficiency) of this architecture in different system defects. The results indicate that, the prediction accuracy of OCNN can reach 97% in the MNIST dataset with a computing speed of over 100 TMAC/s on condition of achievable low insertion loss. It is also observed that the WDM-OPS notably reduces the energy consumption of the electro-optic modulation and thus the OCNN becomes an exceptionally energy-efficient architecture among several well-known optical architectures. In the evaluations, instead of merely considering the computing core, we take the holistic optical system including lasers, electro-optic modulators, data preprocessing, photodetection and transimpedance amplification into consideration. Therefore, this work provides a potential guide for the systematic implementation of the OCNN architecture.