Mohammad Pourhoseinian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mohammad Pourhoseinian has a total of 4 co-authors. Here are the top co-authors by number of shared publications:
- Seyedmehdi Sharifian
University of Nevada
3 shared publications - Neda Asasian-Kolur
Fouman Faculty of Engineering, College of Engineering, University of Tehran, Fouman, Iran
2 shared publications - Bahram Haddadi
Competence Center CHASE GmbH, Ghegastraße 3, 1030 Vienna, Austria
1 shared publication Neda Asasian-Kolur
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by Wiley in Advances in Polymer Technology
- Vol. 2026 (1)
Starve Feeding in Screw Extruders: A Review
Starve‐fed polymer extrusion has become an important strategy for improving process control, energy efficiency, and product quality, but it also introduces partially filled flow regimes that are not captured by classical flood‐fed concepts. This review provides a critical assessment of starve‐fed operation in single‐screw and corotating twin‐screw extruders, structured by extruder type and process region. Key experimental techniques, including screw pull‐out/quench analysis, window‐based and optical visualization, residence time distribution (RTD) measurements, mixing assessments, ultrasonic sensing, pressure profiling, and specific mechanical energy (SME) monitoring, are reviewed with emphasis on how starve feeding modifies melting mechanisms, fill level, RTD, and energy consumption. The experimental evidence base is particularly strong for starve‐fed single‐screw extrusion, where pull‐out and RTD studies clearly demonstrate a transition from contiguous solid‐bed melting to mixed conductive/dispersed melting; corresponding data for starve‐fed twin‐screw extruders remain comparatively scarce and are often limited to local visualization and RTD in selected elements. Modeling approaches are then summarized, from early analytical and empirical models to modern global feed‐to‐die descriptions utilized to partially filled operation. Their capabilities and limitations are discussed separately for single‐ and twin‐screw machines, highlighting where starve‐fed conditions can be treated by adapted flood‐fed models and where new formulations are required. Finally, advanced numerical techniques, computational fluid dynamics (CFD), discrete element method (DEM), and smoothed particle hydrodynamics (SPH), are reviewed with respect to extruder type and phase: DEM for granular solids conveying in the feed region, CFD for free‐surface melt flow in partially filled single screws and selected twin‐screw sections, and SPH for resolving starved and intermeshing flows with explicit free surfaces. The achievements and current limitations of these methods are identified, along with future research needs in improved modeling of partially filled regions, tighter coupling between DEM and CFD/SPH, real‐time process monitoring, and scale‐up strategies for industrial starve‐fed extrusion.
- 1 January 2026
- Published by Wiley in Advances in Polymer Technology
- Vol. 2026 (1)
Open AccessStarve Feeding in Screw Extruders: A Review
Starve‐fed polymer extrusion has become an important strategy for improving process control, energy efficiency, and product quality, but it also introduces partially filled flow regimes that are not captured by classical flood‐fed concepts. This review provides a critical assessment of starve‐fed operation in single‐screw and corotating twin‐screw extruders, structured by extruder type and process region. Key experimental techniques, including screw pull‐out/quench analysis, window‐based and optical visualization, residence time distribution (RTD) measurements, mixing assessments, ultrasonic sensing, pressure profiling, and specific mechanical energy (SME) monitoring, are reviewed with emphasis on how starve feeding modifies melting mechanisms, fill level, RTD, and energy consumption. The experimental evidence base is particularly strong for starve‐fed single‐screw extrusion, where pull‐out and RTD studies clearly demonstrate a transition from contiguous solid‐bed melting to mixed conductive/dispersed melting; corresponding data for starve‐fed twin‐screw extruders remain comparatively scarce and are often limited to local visualization and RTD in selected elements. Modeling approaches are then summarized, from early analytical and empirical models to modern global feed‐to‐die descriptions utilized to partially filled operation. Their capabilities and limitations are discussed separately for single‐ and twin‐screw machines, highlighting where starve‐fed conditions can be treated by adapted flood‐fed models and where new formulations are required. Finally, advanced numerical techniques, computational fluid dynamics (CFD), discrete element method (DEM), and smoothed particle hydrodynamics (SPH), are reviewed with respect to extruder type and phase: DEM for granular solids conveying in the feed region, CFD for free‐surface melt flow in partially filled single screws and selected twin‐screw sections, and SPH for resolving starved and intermeshing flows with explicit free surfaces. The achievements and current limitations of these methods are identified, along with future research needs in improved modeling of partially filled regions, tighter coupling between DEM and CFD/SPH, real‐time process monitoring, and scale‐up strategies for industrial starve‐fed extrusion.
- 16 December 2023
- Published by Elsevier in Biomass and Bioenergy
- Vol. 180
Comparative computational fluid dynamics analysis of fast pyrolysis of agricultural feedstocks across different biomass categories
- 16 December 2023
- Published by Elsevier in Biomass and Bioenergy
- Vol. 180
Comparative computational fluid dynamics analysis of fast pyrolysis of agricultural feedstocks across different biomass categories
- 1 June 2021
- Published by Elsevier in Applied Thermal Engineering
- Vol. 191
CFD investigation of heat and moisture recovery from air with membrane heat exchanger
- 1 June 2021
- Published by Elsevier in Applied Thermal Engineering
- Vol. 191
CFD investigation of heat and moisture recovery from air with membrane heat exchanger
- 31 December 2020
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 3811-3826
Unsteady-state numerical analysis of advanced Savonius wind turbine
In order to improve the performance coefficients of the classic Savonius rotor, a newly-designed blade was proposed and numerically analyzed via CFD tools. For this purpose, a comprehensive-validated numerical analysis was carried out to take into account all aerodynamic aspects of the new design. The blade geometry was optimized by determining the best overlap ratio (0.47) which led to the highest performance at different tip speed ratios. The better performance of the optimal advanced Savonius rotor compared to the classic rotor was demonstrated by comparing its torque and power coefficients at different tip speed ratios. It is shown that working at relatively low tip speed ratios results in higher torque coefficients with more superiority over the corresponding classical rotor; however, to achieve more stable and regular blade rotation with less noise and fluctuations, tip speed ratios around 0.75 and smaller are proposed. In order to demonstrate the separation points, the wake phenomenon, and vortices behind the rotating blades, the pressure, velocity, and vorticity contours were prepared and analyzed.
- 31 December 2020
- Published by Taylor & Francis in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
- Vol. 47 (1) , 3811-3826
Unsteady-state numerical analysis of advanced Savonius wind turbine
In order to improve the performance coefficients of the classic Savonius rotor, a newly-designed blade was proposed and numerically analyzed via CFD tools. For this purpose, a comprehensive-validated numerical analysis was carried out to take into account all aerodynamic aspects of the new design. The blade geometry was optimized by determining the best overlap ratio (0.47) which led to the highest performance at different tip speed ratios. The better performance of the optimal advanced Savonius rotor compared to the classic rotor was demonstrated by comparing its torque and power coefficients at different tip speed ratios. It is shown that working at relatively low tip speed ratios results in higher torque coefficients with more superiority over the corresponding classical rotor; however, to achieve more stable and regular blade rotation with less noise and fluctuations, tip speed ratios around 0.75 and smaller are proposed. In order to demonstrate the separation points, the wake phenomenon, and vortices behind the rotating blades, the pressure, velocity, and vorticity contours were prepared and analyzed.