Li Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Li Wang has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Ruizhao Yang
College of Geoscience and Surveying Engineering, China University of Mining and Technology (Beijing), Beijing, China
3 shared publications - Dewei Li
China University of Mining and Technology (Beijing) 1 , State Key Laboratory for Fine Exploration and Intelligent Development of Coal Resources, Beijing, China and , College of Geoscience and Surveying Engineering, Beijing, China
2 shared publications - Hai-Long Wu
State Key Laboratory of Chemo and Biosensing, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, P. R. China
2 shared publications - Hui-Wen Gu
College of Chemistry and Environmental Engineering, College of Life Sciences, Yangtze University, Jingzhou 434023, China
2 shared publications - Lingbin Meng
China University of Mining and Technology – Beijing, College of Geoscience and Surveying Engineering, Beijing 100083, China.;
2 shared publications Ru-Qin Yu
State Key Laboratory of Chemo/Biosensing and Chemometrics, College of Chemistry and Chemical Engineering, Hunan University, Changsha 410082, People's Republic of China
2 shared publications
Latest Publications
- Top Cited Papers
- 7 January 2025
- Published by Elsevier in Phytomedicine
- Vol. 138, 156370
Anti-colorectal cancer actions of Glycyrrhiza uralensis Fisch. and its underlying mechanism via HPLC integration and network pharmacological approaches
- 7 January 2025
- Published by Elsevier in Phytomedicine
- Vol. 138, 156370
Top Cited PapersAnti-colorectal cancer actions of Glycyrrhiza uralensis Fisch. and its underlying mechanism via HPLC integration and network pharmacological approaches
- 20 December 2024
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 13 (1) , T123-T138
Seismic facies-controlled porosity prediction in a tight sandstone reservoir based on the XGBoost algorithm
Porosity is one of the most important properties for evaluating hydrocarbon reservoirs. There is a strong nonlinearity between seismic data and rock-physical properties. Machine-learning methods possess the powerful ability to capture complex nonlinear relationships between these two parameters, holding significant potential for porosity prediction in tight sandstone reservoirs. In this study, we develop a seismic facies-controlled porosity prediction method based on the extreme gradient boosting algorithm. Through the seismic meme inversion method, we obtain high-resolution P-impedance data. In the inversion process, lateral variations of seismic waveforms were used instead of the variogram function. We create labels for model training using porosity curves and borehole side P-impedance data, applying them to the extreme gradient boosting regressor. To demonstrate its feasibility, we apply the model to a real 3D case from an oil field in the Songliao Basin. Our application results demonstrate that this method can provide porosity predictions for tight sandstone reservoirs, maintaining consistency with seismic waveforms and adhering to seismic facies control patterns. The method uses only acoustic traveltime, density, gamma rays, spontaneous potential well-log data, and poststack 3D seismic data as inputs, allowing for quick porosity predictions in the field. Compared with the seismic facies-controlled inversion combined with support vector machine and multiLayer perceptron methods, the method developed in this study provides more reliable porosity predictions, offering insights and references for the exploration and development of tight sandstone reservoirs.
- 20 December 2024
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 13 (1) , T123-T138
Seismic facies-controlled porosity prediction in a tight sandstone reservoir based on the XGBoost algorithm
Porosity is one of the most important properties for evaluating hydrocarbon reservoirs. There is a strong nonlinearity between seismic data and rock-physical properties. Machine-learning methods possess the powerful ability to capture complex nonlinear relationships between these two parameters, holding significant potential for porosity prediction in tight sandstone reservoirs. In this study, we develop a seismic facies-controlled porosity prediction method based on the extreme gradient boosting algorithm. Through the seismic meme inversion method, we obtain high-resolution P-impedance data. In the inversion process, lateral variations of seismic waveforms were used instead of the variogram function. We create labels for model training using porosity curves and borehole side P-impedance data, applying them to the extreme gradient boosting regressor. To demonstrate its feasibility, we apply the model to a real 3D case from an oil field in the Songliao Basin. Our application results demonstrate that this method can provide porosity predictions for tight sandstone reservoirs, maintaining consistency with seismic waveforms and adhering to seismic facies control patterns. The method uses only acoustic traveltime, density, gamma rays, spontaneous potential well-log data, and poststack 3D seismic data as inputs, allowing for quick porosity predictions in the field. Compared with the seismic facies-controlled inversion combined with support vector machine and multiLayer perceptron methods, the method developed in this study provides more reliable porosity predictions, offering insights and references for the exploration and development of tight sandstone reservoirs.
- Open Access
- 1 November 2024
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (11) , 1713-1736
Fabrication of advanced bioinspired anisotropic carbide ceramic composites: Past, recent progress, and future perspectives
Advances in the study of structural ceramic materials have revealed new perspectives and opportunities with an increasing emphasis on incorporating biomimicry concepts. Carbide ceramics with anisotropic crystal structures—such as silicon carbide—exhibit superior properties, including high modulus, high-temperature resistance, wear resistance, and high thermal conductivity, making them ideal structural materials. The implementation of biomimetic texturing techniques can enhance their performance along specific orientations, thereby expanding their potential for use in more rigorous environments and endowing them with integrated structural and functional characteristics. This review provides an overview of commonly textured biological materials and discusses their performance. It emphasizes the techniques used to prepare anisotropic carbide ceramics and anisotropic carbide–ceramic composites—such as strong external field induction (hot working under uniaxial pressure, casting technologies within magnetic alignment, etc.), template methods (biotemplating, ice templating, etc.), and three-dimensional printing technologies (direct ink writing, stereolithography, etc.)—focusing on the work of researchers within the structural ceramic community, summarizing the current challenges in the preparation of anisotropic carbide–ceramic composites, and providing insight into their future development and application.
- 1 November 2024
- Published by Tsinghua University Press in Journal of Advanced Ceramics
- Vol. 13 (11) , 1713-1736
Open AccessFabrication of advanced bioinspired anisotropic carbide ceramic composites: Past, recent progress, and future perspectives
Advances in the study of structural ceramic materials have revealed new perspectives and opportunities with an increasing emphasis on incorporating biomimicry concepts. Carbide ceramics with anisotropic crystal structures—such as silicon carbide—exhibit superior properties, including high modulus, high-temperature resistance, wear resistance, and high thermal conductivity, making them ideal structural materials. The implementation of biomimetic texturing techniques can enhance their performance along specific orientations, thereby expanding their potential for use in more rigorous environments and endowing them with integrated structural and functional characteristics. This review provides an overview of commonly textured biological materials and discusses their performance. It emphasizes the techniques used to prepare anisotropic carbide ceramics and anisotropic carbide–ceramic composites—such as strong external field induction (hot working under uniaxial pressure, casting technologies within magnetic alignment, etc.), template methods (biotemplating, ice templating, etc.), and three-dimensional printing technologies (direct ink writing, stereolithography, etc.)—focusing on the work of researchers within the structural ceramic community, summarizing the current challenges in the preparation of anisotropic carbide–ceramic composites, and providing insight into their future development and application.
- 15 June 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (3) , T611-T622
Seismic attributes for characterization and prediction of carbonate faulted karst reservoirs in the Tarim Basin, China
An ultradeep, faulted karst reservoir of Ordovician carbonate was discovered in the Shunbei area of the Tarim Basin. Fractured-cavity reservoirs buried beneath the large thickness of upper Ordovician mudstone were formed along the fault-karst belts. The hydrocarbon accumulation in these reservoirs is controlled by the fault system, and the oil-gas accumulation was affected by karstification and hydrothermal reformation. Previous studies and 2D modeling revealed that the reservoirs had “bright spot” amplitude responses like “string beads,” and they have developed along the strike-slip faults. However, describing such a complex fault-controlled karst system is still a difficult problem that has not been well addressed. We have sought to instruct the attribute expression of faulted karst reservoirs in the northern part of the Tarim Basin. We applied coherence and fault likelihood (FL) seismic attributes to image faults and fractures zones. We then used a trend analysis method to calculate the residual impedance from the impedance of the acoustic inversion, using the fact that residual impedance has higher lateral resolution in reservoir predictions. Finally, we integrated the coherence, FL, and residual impedance attributes into a new seismic attribute, the “fault-vuggy body,” with a certain fusion coefficient. The fault-vuggy body attribute establishes a connection between faults and karst cavities. This method could help in the characterization and prediction of carbonate faulted karst reservoirs. Available drilling data were used to validate that the fused fault-vuggy body attribute was an effective reservoir prediction method. As the seismic sections and slices along the layer help delineate, the distribution of bright spots and strike-slip faults indicates that the main strike-slip fault zones are the most favorable reservoirs in the Shunbei Oil and Gas Field.
- 15 June 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (3) , T611-T622
Seismic attributes for characterization and prediction of carbonate faulted karst reservoirs in the Tarim Basin, China
An ultradeep, faulted karst reservoir of Ordovician carbonate was discovered in the Shunbei area of the Tarim Basin. Fractured-cavity reservoirs buried beneath the large thickness of upper Ordovician mudstone were formed along the fault-karst belts. The hydrocarbon accumulation in these reservoirs is controlled by the fault system, and the oil-gas accumulation was affected by karstification and hydrothermal reformation. Previous studies and 2D modeling revealed that the reservoirs had “bright spot” amplitude responses like “string beads,” and they have developed along the strike-slip faults. However, describing such a complex fault-controlled karst system is still a difficult problem that has not been well addressed. We have sought to instruct the attribute expression of faulted karst reservoirs in the northern part of the Tarim Basin. We applied coherence and fault likelihood (FL) seismic attributes to image faults and fractures zones. We then used a trend analysis method to calculate the residual impedance from the impedance of the acoustic inversion, using the fact that residual impedance has higher lateral resolution in reservoir predictions. Finally, we integrated the coherence, FL, and residual impedance attributes into a new seismic attribute, the “fault-vuggy body,” with a certain fusion coefficient. The fault-vuggy body attribute establishes a connection between faults and karst cavities. This method could help in the characterization and prediction of carbonate faulted karst reservoirs. Available drilling data were used to validate that the fused fault-vuggy body attribute was an effective reservoir prediction method. As the seismic sections and slices along the layer help delineate, the distribution of bright spots and strike-slip faults indicates that the main strike-slip fault zones are the most favorable reservoirs in the Shunbei Oil and Gas Field.
- 1 February 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (1) , T1-T7
Application of brittleness index to interpret microseismic event distribution in a hydraulically fractured shale formation
Many factors can impact the location data of microseismic events, including natural fractures, rock lithology, in situ stress, and hydraulic-fracturing parameters. The distribution of microseismic events generally tends toward highly brittle areas or areas with brittle minerals. Moreover, location data of microseismic events lack effective evaluation methods. Therefore, we have developed a method to use lithologic information and prestack seismic data to explain the distribution of well Tian Xing microseismic events. We have analyzed the brittleness of the target formation through the well logs and core. We inverted the Young’s modulus and Poisson’s ratio based on simultaneous amplitude variation with offset inversion by the prestack seismic data. We then computed the 3D brittleness index (BI) property volume by Grieser and Rickman’s method. In addition, the microseismic event distribution and BI map were then combined to show the internal relationship between the two results. We found that the well logs and core analysis demonstrated that the target formation has high brittleness. Generally, areas with more natural fractures have a higher probability of inducing hydraulic fractures. However, the analysis results show that the BI has an impact on the distribution of hydraulic fractures. Therefore, BI explains the reason for the distribution of almost all events in the northeast of the perforation. These observations also supported the concept that microseismic events preferentially grow toward more brittle areas.
- 1 February 2021
- Published by Society of Exploration Geophysicists in Interpretation
- Vol. 9 (1) , T1-T7
Application of brittleness index to interpret microseismic event distribution in a hydraulically fractured shale formation
Many factors can impact the location data of microseismic events, including natural fractures, rock lithology, in situ stress, and hydraulic-fracturing parameters. The distribution of microseismic events generally tends toward highly brittle areas or areas with brittle minerals. Moreover, location data of microseismic events lack effective evaluation methods. Therefore, we have developed a method to use lithologic information and prestack seismic data to explain the distribution of well Tian Xing microseismic events. We have analyzed the brittleness of the target formation through the well logs and core. We inverted the Young’s modulus and Poisson’s ratio based on simultaneous amplitude variation with offset inversion by the prestack seismic data. We then computed the 3D brittleness index (BI) property volume by Grieser and Rickman’s method. In addition, the microseismic event distribution and BI map were then combined to show the internal relationship between the two results. We found that the well logs and core analysis demonstrated that the target formation has high brittleness. Generally, areas with more natural fractures have a higher probability of inducing hydraulic fractures. However, the analysis results show that the BI has an impact on the distribution of hydraulic fractures. Therefore, BI explains the reason for the distribution of almost all events in the northeast of the perforation. These observations also supported the concept that microseismic events preferentially grow toward more brittle areas.
- Open Access
- 1 December 2017
- Published by Elsevier in Journal of Integrative Agriculture
- Vol. 16 (12) , 2886-2897
Review on the processing characteristics of cereals and oilseeds and their processing suitability evaluation technology
- 1 December 2017
- Published by Elsevier in Journal of Integrative Agriculture
- Vol. 16 (12) , 2886-2897
Open AccessReview on the processing characteristics of cereals and oilseeds and their processing suitability evaluation technology
- 1 January 2017
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Chromatography
- Vol. 35 (9) , 980-986
Rapid determination of four phenolic environmental estrogen residues in cooking oil by ultra-performance liquid chromatography-high resolution mass spectrometry coupled with solid-phase extraction
A fast, sensitive and accurate method for the determination of trace bisphenol S (BPS), bisphenol F (BPF), bisphenol A (BPA) and 4-nonylphenol (4-NP) in cooking oil samples was developed by ultra-performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS) coupled with solid-phase extraction (SPE). Cooking oil samples were extracted by acetonitrile, then the supernatant was purified by SLC SPE cartridges. The chromatographic separation was carried out on a Waters ACQUITY UPLC HSS T3 column (100 mm×2.1 mm, 1.8 μm) with a linear gradient elution procedure using 0.05% (v/v) triethanolamine aqueous solution and methanol as mobile phases. The quantification analysis was operated in a negative electrospray ion (ESI-) source mode under the selected ion monitoring (SIM) mode with internal standard method. The four target analytes showed good linearity with correlation coefficients (r) greater than 0.999. The limits of detection (LODs, S/N=3) and limits of quantification (LOQs, S/N=10) were in the ranges of 0.03-0.11 μg/kg and 0.10-0.36 μg/kg, respectively. The recoveries of the four target analytes spiked in oil samples were in the range of 86.3%-96.1% at spiked levels of 1.0, 10.0 and 80.0 μg/kg, respectively, while the relative standard deviations (RSDs) were in range of 2.2%-8.8% (n=6). No significant matrix interference was found in this method. The proposed method is simple and fast. It can be applied for the rapid determination of trace BPS, BPF, BPA, and 4-NP in cooking oil samples.
- 1 January 2017
- Published by China Science Publishing & Media Ltd. in Chinese Journal of Chromatography
- Vol. 35 (9) , 980-986
Rapid determination of four phenolic environmental estrogen residues in cooking oil by ultra-performance liquid chromatography-high resolution mass spectrometry coupled with solid-phase extraction
A fast, sensitive and accurate method for the determination of trace bisphenol S (BPS), bisphenol F (BPF), bisphenol A (BPA) and 4-nonylphenol (4-NP) in cooking oil samples was developed by ultra-performance liquid chromatography-high resolution mass spectrometry (UPLC-HRMS) coupled with solid-phase extraction (SPE). Cooking oil samples were extracted by acetonitrile, then the supernatant was purified by SLC SPE cartridges. The chromatographic separation was carried out on a Waters ACQUITY UPLC HSS T3 column (100 mm×2.1 mm, 1.8 μm) with a linear gradient elution procedure using 0.05% (v/v) triethanolamine aqueous solution and methanol as mobile phases. The quantification analysis was operated in a negative electrospray ion (ESI-) source mode under the selected ion monitoring (SIM) mode with internal standard method. The four target analytes showed good linearity with correlation coefficients (r) greater than 0.999. The limits of detection (LODs, S/N=3) and limits of quantification (LOQs, S/N=10) were in the ranges of 0.03-0.11 μg/kg and 0.10-0.36 μg/kg, respectively. The recoveries of the four target analytes spiked in oil samples were in the range of 86.3%-96.1% at spiked levels of 1.0, 10.0 and 80.0 μg/kg, respectively, while the relative standard deviations (RSDs) were in range of 2.2%-8.8% (n=6). No significant matrix interference was found in this method. The proposed method is simple and fast. It can be applied for the rapid determination of trace BPS, BPF, BPA, and 4-NP in cooking oil samples.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 121-127
Optimal Assignment for Tree-Structure Task Graph on Heterogeneous Multicore Systems Considering Time Constraint
This paper addresses task assignment problem fortree-structure task model on heterogeneous multicore embedded systems with time constraint considering both execution time and communication load. The goal is to minimize the total system cost for a given task graph representing a set of tasks and data dependencies in a heterogeneous multicore systemwhile the time constraint is satisfied. Instead of assigning all the tasks to processors of the same type in a homogeneous environment, heterogeneous task assignment usually can reduce the system cost by exploring various capacities and costs in a heterogeneous multicore system. The general heterogeneous assignment problem is NP-complete. In this paper, we show that optimal task assignment can be found for some widely-used, special task graphs, such as tree-structure graph, using dynamic programming. A dynamic programming algorithm, the Tree Assign (TA) algorithm, is proposed in this paper to solve the heterogeneous task assignment problem for tree-structure task graphs. The experimental results show that our algorithm reduces the total system cost by 31.8% compared with assignment results on homogeneous multicore systems. Also, our algorithm achieves an average cost reduction by 21.9% compared with greedy algorithm.
- 1 September 2012
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 121-127
Optimal Assignment for Tree-Structure Task Graph on Heterogeneous Multicore Systems Considering Time Constraint
This paper addresses task assignment problem fortree-structure task model on heterogeneous multicore embedded systems with time constraint considering both execution time and communication load. The goal is to minimize the total system cost for a given task graph representing a set of tasks and data dependencies in a heterogeneous multicore systemwhile the time constraint is satisfied. Instead of assigning all the tasks to processors of the same type in a homogeneous environment, heterogeneous task assignment usually can reduce the system cost by exploring various capacities and costs in a heterogeneous multicore system. The general heterogeneous assignment problem is NP-complete. In this paper, we show that optimal task assignment can be found for some widely-used, special task graphs, such as tree-structure graph, using dynamic programming. A dynamic programming algorithm, the Tree Assign (TA) algorithm, is proposed in this paper to solve the heterogeneous task assignment problem for tree-structure task graphs. The experimental results show that our algorithm reduces the total system cost by 31.8% compared with assignment results on homogeneous multicore systems. Also, our algorithm achieves an average cost reduction by 21.9% compared with greedy algorithm.