Wanxiu Hai
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Wanxiu Hai has a total of 68 co-authors. Here are the top co-authors by number of shared publications:
- Yuhong Chen
College of Materials Science & Engineering, North Minzu University, Yinchuan 750021, China
7 shared publications Meiling Liu
6 shared publications- Meiling Liu
College of Materials Science and Engineering, North Minzu University, Yinchuan 750021, China
6 shared publications - Hai Zhang
College of Materials Science & Engineering, North Minzu University, Yinchuan 750021, China
3 shared publications Zihao Wu
North Minzu University School of Materials Science and Engineering Yinchuan 750021 , China
3 shared publicationsHao Chen
North Minzu University School of Materials Science and Engineering Yinchuan 750021 , China
2 shared publications
Latest Publications
- Open Access
- 10 May 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (5) , 258
Synthesis, Microstructure and Properties of Non-Stoichiometric High-Entropy Carbide (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)Cx Powder
Non-stoichiometric high-entropy carbides (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)Cx (x = 0.71–0.85) nanoscale powders were prepared using oxides and carbon as raw materials via carbothermal reduction. The (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)C0.73 synthesized at 1700 °C exhibited a grain size of approximately 400 nm, an oxygen content of 0.3 wt.%, and uniform nanoscale distribution of the five metal elements. After ball milling, (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)C0.73 powder was sintered by spark plasma sintering to produce high-entropy ceramics with a relative density of 98.1% and an average particle size of about 5.3 μm. The Vickers hardness, nano-hardness, Young’s modulus, and fracture toughness were 17.6 GPa, 29.1 GPa, 514 GPa, and 5.3 MPa·m1/2, respectively. The thermal conductivity of the ceramic at room-temperature was as low as 8.5 W/m·K.
- 10 May 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (5) , 258
Open AccessSynthesis, Microstructure and Properties of Non-Stoichiometric High-Entropy Carbide (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)Cx Powder
Non-stoichiometric high-entropy carbides (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)Cx (x = 0.71–0.85) nanoscale powders were prepared using oxides and carbon as raw materials via carbothermal reduction. The (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)C0.73 synthesized at 1700 °C exhibited a grain size of approximately 400 nm, an oxygen content of 0.3 wt.%, and uniform nanoscale distribution of the five metal elements. After ball milling, (Nb0.2Ta0.2Ti0.2W0.2Zr0.2)C0.73 powder was sintered by spark plasma sintering to produce high-entropy ceramics with a relative density of 98.1% and an average particle size of about 5.3 μm. The Vickers hardness, nano-hardness, Young’s modulus, and fracture toughness were 17.6 GPa, 29.1 GPa, 514 GPa, and 5.3 MPa·m1/2, respectively. The thermal conductivity of the ceramic at room-temperature was as low as 8.5 W/m·K.
- 14 April 2026
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 46 (12)
Influence of carbon deficiency on the mechanical and thermal properties of high-entropy carbide (Mo0.25Nb0.25Ta0.25Ti0.25)Cx
- 14 April 2026
- Published by Elsevier in Journal of the European Ceramic Society
- Vol. 46 (12)
Influence of carbon deficiency on the mechanical and thermal properties of high-entropy carbide (Mo0.25Nb0.25Ta0.25Ti0.25)Cx
- Open Access
Increased Thermal Conductivity of Liquid-Phase Sintering Silicon Carbide with Ytterbium Oxide and Magnesium Oxide
Using α-SiC powder as a raw material, with ytterbium oxide and magnesium oxide as liquid-phase sintering aids, silicon carbide ceramics were prepared via spark plasma sintering (SPS) at 1900, 2000, and 2050 °C with a 10 min dwell. As the sintering temperature increased, the grain size grew from 0.54 μm to 17.59 μm, while the thermal conductivity correspondingly increased from 122.4 W/(m·K) to 231.8 W/(m·K). Microstructural analyses revealed that elevated sintering temperatures significantly accelerated the dissolution–precipitation process, thereby inducing abnormal grain growth. Grain size is identified as the dominant factor governing the thermal conductivity of SiC ceramics. Larger grains reduce grain boundary density and interfacial thermal resistance, thereby facilitating phonon transport.
Open AccessIncreased Thermal Conductivity of Liquid-Phase Sintering Silicon Carbide with Ytterbium Oxide and Magnesium Oxide
Using α-SiC powder as a raw material, with ytterbium oxide and magnesium oxide as liquid-phase sintering aids, silicon carbide ceramics were prepared via spark plasma sintering (SPS) at 1900, 2000, and 2050 °C with a 10 min dwell. As the sintering temperature increased, the grain size grew from 0.54 μm to 17.59 μm, while the thermal conductivity correspondingly increased from 122.4 W/(m·K) to 231.8 W/(m·K). Microstructural analyses revealed that elevated sintering temperatures significantly accelerated the dissolution–precipitation process, thereby inducing abnormal grain growth. Grain size is identified as the dominant factor governing the thermal conductivity of SiC ceramics. Larger grains reduce grain boundary density and interfacial thermal resistance, thereby facilitating phonon transport.
- Open Access
- 7 January 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (1) , 29
Interface, Mechanical and Thermal Properties of In Situ Generated V(C,N) Solid Solution Reinforced SiC–AlN–VC Multiphase Ceramics
Silicon carbide (SiC) ceramics are regarded as high-performance structural materials due to their excellent high-temperature strength, wear resistance, and thermal stability. However, their inherent high brittleness, low fracture toughness, and difficulty in densification have limited their wider application. To overcome these challenges, introducing a second phase and/or sintering aids is necessary. In this paper, SiC–AlN–VC multiphase ceramics were fabricated via spark plasma sintering at 1800 °C to 2100 °C. The interface, mechanical, and thermal properties were examined. It was found that the VC particles effectively pin the grain boundaries and suppress the abnormal growth of SiC grains. At temperatures exceeding 1800 °C, the N atoms released from the decomposition of AlN diffuse into the VC lattice, forming a V(C,N) solid solution that enhances both the toughness and strength of the ceramics. With increasing sintering temperature, the mechanical properties of the SiC multiphase ceramics first improve and then deteriorate. Ultimately, a nearly fully dense SiC multiphase ceramic is obtained. The maximum hardness, flexural strength, and fracture toughness of SAV20 are 28.7 GPa, 508 MPa, and 5.25 MPa·m1/2, respectively. Furthermore, the room-temperature friction coefficient and wear rate are 0.41 and 3.41 × 10−5 mm3/(N·m), respectively, and the thermal conductivity is 58 W/(m·K).
- 7 January 2026
- Published by MDPI AG in Journal of Composites Science
- Vol. 10 (1) , 29
Open AccessInterface, Mechanical and Thermal Properties of In Situ Generated V(C,N) Solid Solution Reinforced SiC–AlN–VC Multiphase Ceramics
Silicon carbide (SiC) ceramics are regarded as high-performance structural materials due to their excellent high-temperature strength, wear resistance, and thermal stability. However, their inherent high brittleness, low fracture toughness, and difficulty in densification have limited their wider application. To overcome these challenges, introducing a second phase and/or sintering aids is necessary. In this paper, SiC–AlN–VC multiphase ceramics were fabricated via spark plasma sintering at 1800 °C to 2100 °C. The interface, mechanical, and thermal properties were examined. It was found that the VC particles effectively pin the grain boundaries and suppress the abnormal growth of SiC grains. At temperatures exceeding 1800 °C, the N atoms released from the decomposition of AlN diffuse into the VC lattice, forming a V(C,N) solid solution that enhances both the toughness and strength of the ceramics. With increasing sintering temperature, the mechanical properties of the SiC multiphase ceramics first improve and then deteriorate. Ultimately, a nearly fully dense SiC multiphase ceramic is obtained. The maximum hardness, flexural strength, and fracture toughness of SAV20 are 28.7 GPa, 508 MPa, and 5.25 MPa·m1/2, respectively. Furthermore, the room-temperature friction coefficient and wear rate are 0.41 and 3.41 × 10−5 mm3/(N·m), respectively, and the thermal conductivity is 58 W/(m·K).
- Open Access
Synthesis and Sintering of Nonstoichiometric (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Cx Nanoscale Powders for Highly-Dense Ceramics
Guided by thermodynamic calculations, this study successfully synthesized nonstoichiometric high-entropy carbide (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Cx (x = 0.875–0.972) nanometer-sized powders using micrometer-sized metal oxides (MoO3, Nb2O5, Ta2O5, TiO2, and WO3) and carbon black as raw materials through carbothermic reduction at 1400–1550 °C. The powders synthesized above 1500 °C exhibited a single-phase rock-salt structure with an average grain size as low as 270 nm. TEM analysis confirmed the lattice parameters increased from 0.4378 nm to 0.4395 nm with decreasing carbon content and synthesis temperature. After ball milling, the optimal powder was densified into a (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)C0.9 ceramic block through spark plasma sintering (SPS, 1950 °C/10 min/20 MPa), achieving a relative density of 99.1% and an average grain size of 4.3 μm. This ceramic exhibited remarkable mechanical properties (17.3 GPa Vickers hardness, 25.9 GPa nano-hardness, 524 GPa Young’s modulus, and 4.43 MPa·m1/2 fracture toughness) and a relatively low room-temperature thermal conductivity of 8.3 W·m−1·K−1. This study provides a theoretical basis and technical approach for the preparation of high-hardness and low-thermal-conductivity nonstoichiometric high-entropy carbide ceramics via low-temperature carbothermic reduction and sintering.
Open AccessSynthesis and Sintering of Nonstoichiometric (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Cx Nanoscale Powders for Highly-Dense Ceramics
Guided by thermodynamic calculations, this study successfully synthesized nonstoichiometric high-entropy carbide (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Cx (x = 0.875–0.972) nanometer-sized powders using micrometer-sized metal oxides (MoO3, Nb2O5, Ta2O5, TiO2, and WO3) and carbon black as raw materials through carbothermic reduction at 1400–1550 °C. The powders synthesized above 1500 °C exhibited a single-phase rock-salt structure with an average grain size as low as 270 nm. TEM analysis confirmed the lattice parameters increased from 0.4378 nm to 0.4395 nm with decreasing carbon content and synthesis temperature. After ball milling, the optimal powder was densified into a (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)C0.9 ceramic block through spark plasma sintering (SPS, 1950 °C/10 min/20 MPa), achieving a relative density of 99.1% and an average grain size of 4.3 μm. This ceramic exhibited remarkable mechanical properties (17.3 GPa Vickers hardness, 25.9 GPa nano-hardness, 524 GPa Young’s modulus, and 4.43 MPa·m1/2 fracture toughness) and a relatively low room-temperature thermal conductivity of 8.3 W·m−1·K−1. This study provides a theoretical basis and technical approach for the preparation of high-hardness and low-thermal-conductivity nonstoichiometric high-entropy carbide ceramics via low-temperature carbothermic reduction and sintering.
- 11 April 2025
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 108 (8)
Enhanced electrocaloric effect in BaTiO 3 ‐based ceramics over a wide working temperature range by domain engineering
BaTiO 3 ‐based lead‐free ferroelectric ceramics are among the most widely utilized materials in contemporary industrial applications and exhibit a high potential for large electrocaloric effect under moderate electric fields. In this study, La 3+ and Nb 5+ were introduced into BaSn 0.05 Ti 0.95 O 3 ceramics. By adding a small amount of the dopants, the tetragonality of BaSn 0.05 Ti 0.95 O 3 was weakened, causing the phase transition peak to shift to room temperature. Simultaneously, the domain structure was optimized, successfully achieving the concurrent existence of both ferroelectric domains and nanodomains. Thus, the working temperature range ( T span ) and adiabatic temperature change (∆ T ) are effectively balanced. Finally, a large ∆ T of 1.31 K under an electric field of 50 kV/cm was attained at x = 0.0125. In addition, the Δ T /Δ E reached 0.262 × 10 −6 K m/V, and the T span (∆ T ≥ 0.8 ∆ T max ) reached 54°C indicating that this ceramic is a high‐performance electrocaloric material for solid‐state cooling applications.
- 11 April 2025
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 108 (8)
Enhanced electrocaloric effect in BaTiO 3 ‐based ceramics over a wide working temperature range by domain engineering
BaTiO 3 ‐based lead‐free ferroelectric ceramics are among the most widely utilized materials in contemporary industrial applications and exhibit a high potential for large electrocaloric effect under moderate electric fields. In this study, La 3+ and Nb 5+ were introduced into BaSn 0.05 Ti 0.95 O 3 ceramics. By adding a small amount of the dopants, the tetragonality of BaSn 0.05 Ti 0.95 O 3 was weakened, causing the phase transition peak to shift to room temperature. Simultaneously, the domain structure was optimized, successfully achieving the concurrent existence of both ferroelectric domains and nanodomains. Thus, the working temperature range ( T span ) and adiabatic temperature change (∆ T ) are effectively balanced. Finally, a large ∆ T of 1.31 K under an electric field of 50 kV/cm was attained at x = 0.0125. In addition, the Δ T /Δ E reached 0.262 × 10 −6 K m/V, and the T span (∆ T ≥ 0.8 ∆ T max ) reached 54°C indicating that this ceramic is a high‐performance electrocaloric material for solid‐state cooling applications.
- Open Access
- 26 November 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (12) , 412
Microstructure, Mechanical, and Tribological Properties of SiC-AlN-TiB2 Multiphase Ceramics
SiC multiphase ceramics were prepared via spark plasma sintering using AlN and TiB2 as the second phase and Y2O3 as a sintering additive. The effects of TiB2 content (10 vol.% and 20 vol.%) and sintering temperature (1900 °C to 2100 °C) on the phase composition, microstructure, and mechanical and tribological properties of SiC multiphase ceramics were investigated. The results showed that Y2O3 reacts with Al2O3 on the surface of AlN to form the intercrystalline phase Y4Al2O9 (YAM), which promotes the densification of the multiphase ceramics. The highest density of SiC multiphase ceramics was achieved at 10 vol.% TiB2 content. Moreover, TiB2 and SiC exhibited good interfacial compatibility. In turn, a thin solid-solution layer (~50 nm) was formed by SiC and AlN at the interface. The periodic structure of SiC prevented the dislocation movement and inhibited the base plane slip. The most optimal mechanic characteristics (a density of 98.3%, hardness of 28 GPa, fracture toughness of 5.7 MPa·m1/2, and bending strength of 553 MPa) were attained at the TiB2 content of 10 vol.%. The specific wear rates of SiC multiphase ceramics were (4–8) × 10−5 mm3/N·m at 25 °C and 2.5 × 10−5 mm3/N·m at 600 °C. The wear mechanism changed from abrasion at 25 °C to a tribo-chemical reaction at 600 °C. Therefore, adding lubricious oxides of TiB2 is beneficial for the improvement in wear resistance of SiC ceramics at 600 °C.
- 26 November 2024
- Published by MDPI AG in Lubricants
- Vol. 12 (12) , 412
Open AccessMicrostructure, Mechanical, and Tribological Properties of SiC-AlN-TiB2 Multiphase Ceramics
SiC multiphase ceramics were prepared via spark plasma sintering using AlN and TiB2 as the second phase and Y2O3 as a sintering additive. The effects of TiB2 content (10 vol.% and 20 vol.%) and sintering temperature (1900 °C to 2100 °C) on the phase composition, microstructure, and mechanical and tribological properties of SiC multiphase ceramics were investigated. The results showed that Y2O3 reacts with Al2O3 on the surface of AlN to form the intercrystalline phase Y4Al2O9 (YAM), which promotes the densification of the multiphase ceramics. The highest density of SiC multiphase ceramics was achieved at 10 vol.% TiB2 content. Moreover, TiB2 and SiC exhibited good interfacial compatibility. In turn, a thin solid-solution layer (~50 nm) was formed by SiC and AlN at the interface. The periodic structure of SiC prevented the dislocation movement and inhibited the base plane slip. The most optimal mechanic characteristics (a density of 98.3%, hardness of 28 GPa, fracture toughness of 5.7 MPa·m1/2, and bending strength of 553 MPa) were attained at the TiB2 content of 10 vol.%. The specific wear rates of SiC multiphase ceramics were (4–8) × 10−5 mm3/N·m at 25 °C and 2.5 × 10−5 mm3/N·m at 600 °C. The wear mechanism changed from abrasion at 25 °C to a tribo-chemical reaction at 600 °C. Therefore, adding lubricious oxides of TiB2 is beneficial for the improvement in wear resistance of SiC ceramics at 600 °C.
- 3 November 2024
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 22 (2)
Effect of gradation on thermal and mechanical properties of reaction‐bonded silicon carbide ceramics
Particle grading is a reliable method to improve mechanical properties of reaction‐bonded silicon carbide (RBSC) ceramics. This work aims to explore the effects of particle grading on thermal and mechanical characteristics of RBSC ceramics. Results showed that the powder grading enabled to increase sintering density of silicon carbide (SiC) ceramics. The use of large particle SiC powder in grading led to a 28% increase in thermal conductivity but a 22% decrease in bending strength. Meanwhile, the addition of finer SiC powder exerted minimal effect on thermal conductivity but noticeably increased bending strength by 10%. Therefore, properly adjusting particle size in grading allows for the control of residual Si content and microstructure, thereby simultaneously increasing thermal conductivity and bending strength of the material.
- 3 November 2024
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 22 (2)
Effect of gradation on thermal and mechanical properties of reaction‐bonded silicon carbide ceramics
Particle grading is a reliable method to improve mechanical properties of reaction‐bonded silicon carbide (RBSC) ceramics. This work aims to explore the effects of particle grading on thermal and mechanical characteristics of RBSC ceramics. Results showed that the powder grading enabled to increase sintering density of silicon carbide (SiC) ceramics. The use of large particle SiC powder in grading led to a 28% increase in thermal conductivity but a 22% decrease in bending strength. Meanwhile, the addition of finer SiC powder exerted minimal effect on thermal conductivity but noticeably increased bending strength by 10%. Therefore, properly adjusting particle size in grading allows for the control of residual Si content and microstructure, thereby simultaneously increasing thermal conductivity and bending strength of the material.
- 6 April 2024
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 21 (5) , 3152-3161
Synthesis, microstructure, properties of nonstoichiometry high entropy carbide (MoNbTaTiW)C 4.5
A dense, fine‐grained, and toughened nonstoichiometry high entropy carbide (HEC) (MoNbTaTiW)C 4.5 was synthesized via a two‐step way of carbothermal reduction‐solid solution using metal oxides and carbon. The effects of carbothermal reduction temperature, sintering temperature, and carbon content on the phase, microstructure, mechanical and thermal properties of (MoNbTaTiW)C 4.5 were studied. The results showed dense and single phase (MoNbTaTiW)C 4.5 were synthesized through reduction of metal oxides at 1600°C and sintered at and above 1950°C by spark plasma sintering. Reduced carbon content and higher solid solution temperature were beneficial to obtain dense HECs with better mechanical properties. With a carbon content of 90%, a reduction temperature of 1600°C, a holding time of 20 min, and a sintering temperature of 1950°C, the as‐synthesized (MoNbTaTiW)C 4.5 showed a higher fracture toughness (5.2 MPa·m 1/2 ). Besides, the (MoNbTaTiW)C 4.5 showed a low thermal conductivity (5.9 W/m·K, at room temperature).
- 6 April 2024
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 21 (5) , 3152-3161
Synthesis, microstructure, properties of nonstoichiometry high entropy carbide (MoNbTaTiW)C 4.5
A dense, fine‐grained, and toughened nonstoichiometry high entropy carbide (HEC) (MoNbTaTiW)C 4.5 was synthesized via a two‐step way of carbothermal reduction‐solid solution using metal oxides and carbon. The effects of carbothermal reduction temperature, sintering temperature, and carbon content on the phase, microstructure, mechanical and thermal properties of (MoNbTaTiW)C 4.5 were studied. The results showed dense and single phase (MoNbTaTiW)C 4.5 were synthesized through reduction of metal oxides at 1600°C and sintered at and above 1950°C by spark plasma sintering. Reduced carbon content and higher solid solution temperature were beneficial to obtain dense HECs with better mechanical properties. With a carbon content of 90%, a reduction temperature of 1600°C, a holding time of 20 min, and a sintering temperature of 1950°C, the as‐synthesized (MoNbTaTiW)C 4.5 showed a higher fracture toughness (5.2 MPa·m 1/2 ). Besides, the (MoNbTaTiW)C 4.5 showed a low thermal conductivity (5.9 W/m·K, at room temperature).
- 30 January 2024
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 21 (3) , 1829-1838
Effect of infiltration temperature on graphitization and properties of diamond/SiC composites with SiC matrix
In this study, diamond/silicon carbide (SiC) composites were prepared by liquid Si infiltration. The effects of the infiltration temperature on the densification, diamond graphitization, and thermal conductivity of the composites were investigated. The effects of the diamond content on the thermal conductivity and bending strength were also explored. X‐ray diffraction and Raman spectroscopy detected diamond graphitization at an infiltration temperature of 1480°C. Almost no graphitized diamond was observed due to reactions between silicon and carbon to form SiC at infiltration temperatures higher than 1480°C. As the infiltration temperature increased, graphitized diamond was consumed, and the thermal conductivity of the composite rose. The thermal conductivity and bending strength of the composites depended on the diamond content, reaching values of 257 W/m K and 237 MPa, respectively, for the sample with a diamond content of 17.9 vol.%. The higher bending strength was mainly ascribed to the high diamond content and well‐bonded interface.
- 30 January 2024
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 21 (3) , 1829-1838
Effect of infiltration temperature on graphitization and properties of diamond/SiC composites with SiC matrix
In this study, diamond/silicon carbide (SiC) composites were prepared by liquid Si infiltration. The effects of the infiltration temperature on the densification, diamond graphitization, and thermal conductivity of the composites were investigated. The effects of the diamond content on the thermal conductivity and bending strength were also explored. X‐ray diffraction and Raman spectroscopy detected diamond graphitization at an infiltration temperature of 1480°C. Almost no graphitized diamond was observed due to reactions between silicon and carbon to form SiC at infiltration temperatures higher than 1480°C. As the infiltration temperature increased, graphitized diamond was consumed, and the thermal conductivity of the composite rose. The thermal conductivity and bending strength of the composites depended on the diamond content, reaching values of 257 W/m K and 237 MPa, respectively, for the sample with a diamond content of 17.9 vol.%. The higher bending strength was mainly ascribed to the high diamond content and well‐bonded interface.