DKDmitry S. Kuleshov

Dmitry S. Kuleshov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dmitry S. Kuleshov has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The impact of yttrium aluminum garnet stoichiometry deviation on the conversion efficiency of tetravalent chromium ions

    by F.F. Malyavin, Alexander A. Kravtsov, Vitaly A. Tarala, Irina S. Chikulina, Dmitry S. Vakalov, Vyacheslav A. Lapin, Marina S. Nikova, Svetlana E. Khoroshilova, Evgeniy V. Medyanik, Dmitry S. Kuleshov

    In this work, the conversion efficiency of Cr4+ ions and the optical properties of ceramics based on chromium-doped yttrium aluminum garnet were investigated. Increasing the conversion efficiency of Cr3+ to Cr4+ opens up broad prospects for using YAG ceramics as saturable absorbers for passive Q-switching of Nd- and Yb-solid-state lasers. The aim of this work was to study the effect of magnesium oxide concentration on the conversion efficiency of Cr3+ to Cr4+ under conditions of Al3+ (4.8 mol.%) and Y3+ (2.9 mol.%) cations excess in the garnet structure as well as the stoichiometric ratio Y3+/Al3+ = 3/5. The possibility of changing the concentration of Cr4+ ions in both the octahedral and tetrahedral positions due to the formation of magnesium substitution defects when the composition deviates from the yttrium-aluminum garnet stoichiometry has been studied. Chromium-doped transparent optical ceramics based on yttrium-aluminum garnet with different ratios of Y3+/Al3+ cations was obtained by the two-stage coprecipitation method. Magnesium oxide was used as a sintering additive and charge compensator for converting chromium ions from the trivalent to the tetravalent state in concentrations of 0 to 0.2 wt.%. It was found that aluminum excess in the yttrium-aluminum garnet matrix leads to a decrease in the Cr3+ to Cr4+ conversion efficiency. A deviation of stoichiometry towards an excess of yttrium leads to a decrease of air annealing temperature for oxidizing chromium ions to the tetravalent state and their transition to the tetrahedral position. However, the samples optical transmittance with an excess of yttrium was lower than in the cases of an excess of aluminum and stoichiometry. It was found that with an increase in the vacuum sintering temperature from 1780 to 1820 °C in the samples with an excess of aluminum, an increase in the concentration of Cr4+ ions in the tetrahedral position occurs, as evidenced by higher absorption intensity at a wavelength of 1030 nm. For the cases of stoichiometry and an excess of yttrium in garnet, this effect is less pronounced. Samples of optical ceramics of yttrium-aluminum garnet with a light transmission of more than 75 % in the visible and near-IR ranges with pronounced absorption bands of chromium have been obtained. The results of the work can be applied to the creation of passive switches for solid-state lasers.


  • Open Access

    Shallow aquifers as an element of methane biogeochemical cycle in West Siberia

    by Aleksandr Sabrekov, Anatoly Prokushkin, Yuriy Litti, Mikhail Glagolev, Ekaterina Parkhomchuk, Alexey Petrozhitskii, Peter Kalinkin, Dmitry Kuleshov, Irina Terentieva

    Methane seeps – cm-sized holes and craters with an active release of gas bubbles and water – were recently found within boreal floodplains of Western Siberia. Seep-abundant areas are hot spots of methane emission; fluxes reach hundreds of mgCH4 m-2 h-1 from individual seeps. Methane in seeps is of modern primary microbial origin. We suggest that it is produced in raised bogs covering 30-40% of the region area. Lateral methane transport from raised bogs to seeps occurs through shallow aquifers where dissolved methane concentration reaches tens of percent saturation. The objectives of this study were to assess: i) a spatial distribution and key drivers of CH4 accumulation in groundwater on a regional scale, ii) methane origin, iii) groundwater discharge to rivers, and iv) oxidation of methane in groundwater.The study sites in West Siberia were located within the latitudinal and longitudinal transects representing tundra, taiga and steppe biomes: 1000 km in north-south (65.5°-56.4° N) and 700 km in east-west (63.3°-76.5° E) directions. Ground water samples (N = 25) were collected in active wells of municipal water supply stations with depths varying from 25 to 300 meters. Dissolved hydrocarbons and carbon dioxide in groundwater samples were obtained by headspace technique. Along with determination of C-containing gas concentrations in samples we measured their isotopic composition (δ13С in СО2, δ13С and δD in СН4 and 14C in СН4). In parallel, groundwaters were measured for pH, electrical conductivity, inorganic and organic carbon concentrations, water stable isotope ratios (δD and δ18О), 3H content and concentrations of major anions and cations. To estimate an input of groundwaters to a river network of the study region we analyzed the dissolved methane concentrations and water stable isotope ratios (δD and δ18О) in different order rivers (N = 60).Groundwaters of shallow aquifers in forest-tundra, middle and southern taiga of Western Siberia are highly saturated with methane (average value 38.8% of the full saturation or 827 μmol l-1), while in the northern taiga and forest-steppe the dissolved methane concentration did not exceed 0.7% of the full saturation (15 μmol l-1). The key driver was the site location in relation to bogs: groundwater CH4 concentration was higher in aquifers, that are located downstream of wetland-dominated areas (along the groundwater flow direction). Values of δ13С, δDand 14С in СН4 and δ13С in СО2 indicated the modern primary microbial origin of methane and a negligible methane oxidation in aquifers. Dissolved organic carbon concentration positively correlated with dissolved methane concentration (R2 = 0.55, p < 0.0001 for a power fit). Higher concentrations of dissolved organic carbon and methane corresponded to waters that are more depleted in δD and δ18О. Groundwater contributed to at least 20% of river discharge throughout the region during the summer low-flow period. Thus, shallow aquifers of West Siberia provide an effective pathway for methane migration from raised bogs to rivers and, further, to the atmosphere.This study was supported by a grant of the Russian Science Foundation (No. 19-77-10074).

  • MODIFICATION OFTHE DENTAL ARCH SHAPE USING GRAPHIC REPRODUCTION METHOD AND ITS CLINICALEFFECTIVENESS IN PATIENTS WITH OCCLUSION ANOMALIES

    by Oleg Ivanyuta, Ghamdan Al-Haraz, Dmitry Domenyuk, Sergei Dmitrienko, Stanislav Domenyuk, Sergey Ivanyuta, Dmitry Kuleshov

    Based on the results of the dentoalveolar system morphometry performed in patients with permanent teeth physiological occlusion we have developed a method for studying the anterior dental arch. It follows the circle of geometry patterns as well as stable values in the medialdistal dimensions of the front teeth crowns. In view of the mesial-distal dimensions of 14 teeth and dental arch width between the second molars and individually built radius of the circle we modified the method of dental arches graphic reproduction. The first stage of the dental arch individual shape graphic reproduction implies designing a dental pentagon, whereas its base is the width of the dental arch between the second molars, and the median sagittal line determines the depth of the dental arch. The upper sides of the pentagon (incisor-canine diagonals) run from the central interincisal point to the canine point, while the lower sides (canine-molar diagonals) connect the canine points to the molar points. At the second stage of the dental arch individual shape graphic reproduction, a circle is outlined, whose radius is related directly to the width of the anterior dental arch, and has an inverse relationship with its depth. There is a proof offered for clinical feasibility of the method employed to predict the optimal individual shape of the dental arch through graphic reproduction in patients with class I Angel occlusion issues. The study showed that the effectiveness of therapeutic and diagnostic measures for patients with abnormal shape and size of dental arches. It can be achieved if the sequence of the graphic construction stages is strictly followed.


  • Open Access

    Ammonium sulphate effect on characteristics of YAG:Yb nanopowders and optical ceramics

    by Marina S. Nikova, Alexander A. Kravtsov, Irina S. Chikulina, F.F. Malyavin, Vitaly A. Tarala, Dmitry S. Vakalov, Dmitry S. Kuleshov, Lyudmila V. Tarala, E.A. Evtu Shenko, Vyacheslav A. Lapin

    Subject of Research. The paper presents the study of ammonium sulfate concentration effect on the content of impurities and the morphology of oxyhydrate powders and ceramic powders. Method. The synthesis of precursor powders was carried out by the method of reverse heterophase precipitation from chlorides. The method of energy dispersive analysis of the elemental composition was used to analyze the dynamics of changes in the concentration of chlorine and sulfur impurities in oxyhydrate powders and ceramic powders. The morphology of the experimental samples was evaluated according to scanning electron microscopy. Analysis of the agglomeration degree was performed using X-ray phase analysis methods and the BET gas adsorption method. Main Results. It was found that the usage of ammonium sulfate not only reduces the degree of agglomeration of ceramic powders by two orders of magnitude but also reduces the chlorine impurity concentration from 0.2 at. % to less than 0.01 at. %. In addition, the possibility of controlling the value of the specific surface area in the range of 1.5–15 m2/g by changing the concentration of ammonium sulfate was revealed. Practical Relevance. Applying an improved technique for the synthesis of ceramic powders, samples of optical ceramics were obtained with light transmission in the visible and near-IR range of more than 70% without taking into account the absorption bands of ytterbium.


  • Influence of the ceramic powder morphology and forming conditions on the optical transmittance of YAG:Yb ceramics

    by F.F. Malyavin, V.A. Tarala, S.V. Kuznetsov, A.A. Kravtsov, I.S. Chikulina, M.S. Shama, E.V. Medyanik, V.S. Ziryanov, E.A. Evtushenko, D.S. Vakalov, et al.


  • Novel synthesis of low-agglomerated YAG:Yb ceramic nanopowders by two-stage precipitation with the use of hexamine

    by Alexander A. Kravtsov, Irina S. Chikulina, Vitaliy A. Tarala, Ekaterina A. Evtushenko, Marina S. Shama, Lyudmila V. Tarala, Fedor F. Malyavin, Dmitry S. Vakalov, Viacheslav A. Lapin, Dmitry S. Kuleshov


  • Dependence of the surface topology and raman scattering spectra of Ge x Si1−x /Si films on the composition variation over the layer thickness

    by L. S. Lunin, I. A. Sysoev, M. D. Bavizhev, V. A. Lapin, D. S. Kuleshov, F. F. Malyavin

    The surface topology and Raman scattering spectra of Ge x Si1 − x /Si(100) films are investigated in dependence of the composition variation over the film thickness. It is shown that the character of the Ge content variation in the Ge x Si1 − x alloy at the constant cumulative Ge fraction in the film (x int = 0.5) affects the surface morphology of the grown Ge x Si1 − x /Si layer. The heterostructures were grown by molecular-beam epitaxy.


  • Investigation of the peculiarities of Ge island growth on Si (100) under MBE conditions

    by V. A. Lapin, B. M. Sinel’NIkov, M. D. Bavizhev, I. A. Sysoev, D. S. Kuleshov, F. F. Malyavin

    The results of investigating the features of Ge-island formation on Si (100) under conditions of molecular-beam epitaxy is presented. Nanosized structures at heteroboundaries (islets and quantum dots)