Rutuja Mandavkar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Rutuja Mandavkar has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Jihoon Lee
Department of Electronic Engineering, College of Electronics and Information, Kwangwoon University, Nowon-gu, Seoul 01897, Republic of Korea
13 shared publications - Shusen Lin
Department of Electronic Engineering, College of Electronics and Information, Kwangwoon University, Nowon-gu, Seoul, 01897, South Korea
12 shared publications - Ahasan Habib
Department of Electronic Engineering, College of Electronics and Information, Kwangwoon University, Nowon-gu, Seoul, 01897, South Korea
11 shared publications - Rakesh Kulkarni
Department of Environmental Engineering, Kwangwoon University, Seoul 139-701, Republic of Korea
7 shared publications - Shalmali Burse
Department of Electronic Engineering, College of Electronics and Information, Kwangwoon University, Nowon-gu, Seoul, 01897, South Korea
6 shared publications - Jae-Hun Jeong
Department of Electronic Engineering College of Electronics and Information Kwangwoon University Nowon‐gu Seoul 01897 South Korea
5 shared publications
Latest Publications
- Open Access
- 3 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (15)
Electrochemical‐Doping of Tungsten on Nickel‐Boron‐Phosphide Microspheres for Accelerated Industrial‐Scale Water Electrolysis at High Current Density
Development of alternative electrocatalysts with high efficiency and stable operation at high current density (HCD) put a challenge for industrial‐level green‐hydrogen production. Herein, tungsten doping is systematically demonstrated on nickel‐boron‐phosphide (W/NiBP) microsphere electrode (ME) by an electrodeposition approach for industrial‐level green‐hydrogen generation. The W/NiBP ME exhibits low hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) overpotentials of 80 and 330 mV at 100 mA cm−2 in 1 m KOH, respectively, outperforming the benchmark electrocatalysts of Pt/C and RuO2. The bi‐functional W/NiBP demonstrates a remarkably low voltage of 1.85 V at 500 mA cm−2 in 1 m KOH for overall water splitting (OWS), exceeding most of the state‐of‐the‐art electrocatalysts. Moreover, the W/NiBP exhibits an ultra‐low cell voltage of 2.50 V under harsh industrial conditions at 2,000 mA cm−2 in 6 m KOH at 60 °C and steady operation at 1,000 mA cm−2 for over 200 h, which is superior to most of the reported electrocatalysts at HCD. A small amount of W incorporation can significantly accelerate the catalytic activity of NiBP microspheres by the increased electrochemical surface area, optimized adsorption‐desorption kinetics of intermediates, high intrinsic activity, and corrosion resistance.
- 3 May 2025
- Published by Wiley in Advanced Materials Technologies
- Vol. 10 (15)
Open AccessElectrochemical‐Doping of Tungsten on Nickel‐Boron‐Phosphide Microspheres for Accelerated Industrial‐Scale Water Electrolysis at High Current Density
Development of alternative electrocatalysts with high efficiency and stable operation at high current density (HCD) put a challenge for industrial‐level green‐hydrogen production. Herein, tungsten doping is systematically demonstrated on nickel‐boron‐phosphide (W/NiBP) microsphere electrode (ME) by an electrodeposition approach for industrial‐level green‐hydrogen generation. The W/NiBP ME exhibits low hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) overpotentials of 80 and 330 mV at 100 mA cm−2 in 1 m KOH, respectively, outperforming the benchmark electrocatalysts of Pt/C and RuO2. The bi‐functional W/NiBP demonstrates a remarkably low voltage of 1.85 V at 500 mA cm−2 in 1 m KOH for overall water splitting (OWS), exceeding most of the state‐of‐the‐art electrocatalysts. Moreover, the W/NiBP exhibits an ultra‐low cell voltage of 2.50 V under harsh industrial conditions at 2,000 mA cm−2 in 6 m KOH at 60 °C and steady operation at 1,000 mA cm−2 for over 200 h, which is superior to most of the reported electrocatalysts at HCD. A small amount of W incorporation can significantly accelerate the catalytic activity of NiBP microspheres by the increased electrochemical surface area, optimized adsorption‐desorption kinetics of intermediates, high intrinsic activity, and corrosion resistance.
- Open Access
- 19 January 2025
- Published by Wiley in Small Methods
- Vol. 9 (7) , e2401939
Chromium‐Doped NiBP Micro‐Sphere Electrocatalysts for Green Hydrogen Production under Industrial Operational Conditions
Wide spread adaptation of green hydrogen can help to mitigate the serious climate issues, increasing global energy demands and the development of advanced electrocatalysts robust under industrial conditions is one of the key technological challenges. Herein, chromium‐doped nickel‐boride‐phosphide (Cr/NiBP) micro sphere (MS) electrocatalyst is demonstrated via a two‐step hydrothermal approach along with post‐annealing. The Cr/NiBP MS demonstrates low hydrogen evolution reaction and oxygen evaluation reaction over potentials of 78 and 250 mV at 100 mA cm−2 in 1 m KOH, out performing most of the reported catalysts. The Cr/NiBP ǁ Cr/NiBP exhibits only 1.54 V at 100 mA cm−2 in 1 m KOH and surpasses the benchmark of RuO2 (+) ǁ Pt/C (−) up to 2000 mA cm−2, which sets it as one of the best bifunctional electrocatalysts. Impressively, it maintains stable performance for over 240 h at 1000 mA cm−2 in 6 m KOH at 60°C, demonstrating rapid response, anti‐corrosion resistance, and robust structural integrity to meet the industrial operational conditions. Further, Cr/NiBP ǁ Pt/C exhibits a super‐low cell‐voltage of 2.25 V at 2000 mA cm−2. The small amount of Cr atoms incorporation can significantly enhance active sites and intrinsic properties, accelerating water dissociation and rapid intermediate formation.
- 19 January 2025
- Published by Wiley in Small Methods
- Vol. 9 (7) , e2401939
Open AccessChromium‐Doped NiBP Micro‐Sphere Electrocatalysts for Green Hydrogen Production under Industrial Operational Conditions
Wide spread adaptation of green hydrogen can help to mitigate the serious climate issues, increasing global energy demands and the development of advanced electrocatalysts robust under industrial conditions is one of the key technological challenges. Herein, chromium‐doped nickel‐boride‐phosphide (Cr/NiBP) micro sphere (MS) electrocatalyst is demonstrated via a two‐step hydrothermal approach along with post‐annealing. The Cr/NiBP MS demonstrates low hydrogen evolution reaction and oxygen evaluation reaction over potentials of 78 and 250 mV at 100 mA cm−2 in 1 m KOH, out performing most of the reported catalysts. The Cr/NiBP ǁ Cr/NiBP exhibits only 1.54 V at 100 mA cm−2 in 1 m KOH and surpasses the benchmark of RuO2 (+) ǁ Pt/C (−) up to 2000 mA cm−2, which sets it as one of the best bifunctional electrocatalysts. Impressively, it maintains stable performance for over 240 h at 1000 mA cm−2 in 6 m KOH at 60°C, demonstrating rapid response, anti‐corrosion resistance, and robust structural integrity to meet the industrial operational conditions. Further, Cr/NiBP ǁ Pt/C exhibits a super‐low cell‐voltage of 2.25 V at 2000 mA cm−2. The small amount of Cr atoms incorporation can significantly enhance active sites and intrinsic properties, accelerating water dissociation and rapid intermediate formation.
Dual‐Functional Ru/Ni‐B‐P Electrocatalyst Toward Accelerated Water Electrolysis and High‐Stability
Development of advanced electrocatalysts for the green hydrogen production by water electrolysis is an important task to reduce the climate and environmental issues as well as to meet the future energy demands. Herein, Ru/Ni‐B‐P sphere electrocatalyst is demonstrated by a combination of hydrothermal and soaking approaches, meeting the industrial requirement of low cell voltage with stable high‐current operation. The Ru/Ni‐B‐P sphere catalyst demonstrates low overpotentials of 191 and 350 mV at 300 mA cm−2 with stable high current operation, ranking it as one of the best oxygen evolution reaction (OER) electrocatalysts. The bifunctional 2‐E system demonstrates a low cell voltage of 2.49 V at 2000 mA cm−2 in 6 m KOH at 60 °C of harsh industrial operation condition. It also demonstrates outstanding stability with continuous 120 h (5 days) CA operation at 1000 mA cm−2. Further, the hybrid configuration of Ru/Ni‐B‐P || Pt/C being paired with the conventional benchmark electrode demonstrates a record low 2‐E cell voltage of 2.40 V at 2000 mA cm−2 in 6 m KOH and excellent stability at high current of 1500 mA cm−2 under industrial operational condition.
Dual‐Functional Ru/Ni‐B‐P Electrocatalyst Toward Accelerated Water Electrolysis and High‐Stability
Development of advanced electrocatalysts for the green hydrogen production by water electrolysis is an important task to reduce the climate and environmental issues as well as to meet the future energy demands. Herein, Ru/Ni‐B‐P sphere electrocatalyst is demonstrated by a combination of hydrothermal and soaking approaches, meeting the industrial requirement of low cell voltage with stable high‐current operation. The Ru/Ni‐B‐P sphere catalyst demonstrates low overpotentials of 191 and 350 mV at 300 mA cm−2 with stable high current operation, ranking it as one of the best oxygen evolution reaction (OER) electrocatalysts. The bifunctional 2‐E system demonstrates a low cell voltage of 2.49 V at 2000 mA cm−2 in 6 m KOH at 60 °C of harsh industrial operation condition. It also demonstrates outstanding stability with continuous 120 h (5 days) CA operation at 1000 mA cm−2. Further, the hybrid configuration of Ru/Ni‐B‐P || Pt/C being paired with the conventional benchmark electrode demonstrates a record low 2‐E cell voltage of 2.40 V at 2000 mA cm−2 in 6 m KOH and excellent stability at high current of 1500 mA cm−2 under industrial operational condition.
- 23 December 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (1) , 2204-2215
Hybrid UV Photodetector Design Incorporating AuPt Alloy Hybrid Nanoparticles, ZnO Quantum Dots, and Graphene Quantum Dots
A hybrid device scheme is an attractive strategy in the construction of advanced UV photodetectors due to the flexibility in selecting the components and correspondingly improved optoelectronic properties by the cooperation of various components, which cannot be achieved by a single component device. In this work, a novel hybrid UV photodetector (PD) is demonstrated by adapting AuPt alloy hybrid nanoparticles (AHNPs), ZnO quantum dots (QDs), and graphene quantum dots (GQDs), namely, GQD/ZnO/AHNP PD. The optimized device achieves high-end figure-of-merit performance with a responsivity of 2299 mA/W, detectivity of 7.04 × 1010 jones, and external quantum efficiency of 741%. Enhanced photocurrent can be associated with the hot electron generation around the AuPt AHNPs and swift transfer to the conduction band of ZnO QDs. At the same time, the added carrier injection is achieved by a thin layer of GQDs. High density of hotspots and electromagnetic fields are generated by the strong localized surface plasmon resonance (LSPR) by the uniquely designed AuPt AHNPs with the fully alloyed AuPt NPs and adjacent small background Au NPs. The e-field distribution of various NP configurations is systematically investigated with finite-difference time-domain (FDTD) simulations.
- 23 December 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (1) , 2204-2215
Hybrid UV Photodetector Design Incorporating AuPt Alloy Hybrid Nanoparticles, ZnO Quantum Dots, and Graphene Quantum Dots
A hybrid device scheme is an attractive strategy in the construction of advanced UV photodetectors due to the flexibility in selecting the components and correspondingly improved optoelectronic properties by the cooperation of various components, which cannot be achieved by a single component device. In this work, a novel hybrid UV photodetector (PD) is demonstrated by adapting AuPt alloy hybrid nanoparticles (AHNPs), ZnO quantum dots (QDs), and graphene quantum dots (GQDs), namely, GQD/ZnO/AHNP PD. The optimized device achieves high-end figure-of-merit performance with a responsivity of 2299 mA/W, detectivity of 7.04 × 1010 jones, and external quantum efficiency of 741%. Enhanced photocurrent can be associated with the hot electron generation around the AuPt AHNPs and swift transfer to the conduction band of ZnO QDs. At the same time, the added carrier injection is achieved by a thin layer of GQDs. High density of hotspots and electromagnetic fields are generated by the strong localized surface plasmon resonance (LSPR) by the uniquely designed AuPt AHNPs with the fully alloyed AuPt NPs and adjacent small background Au NPs. The e-field distribution of various NP configurations is systematically investigated with finite-difference time-domain (FDTD) simulations.
- 30 July 2022
- Published by Wiley in Advanced Sustainable Systems
- Vol. 6 (9)
Higher Water‐Splitting Performance of Boron‐Based Porous CoMnB Electrocatalyst over the Benchmarks at High Current in 1 m KOH and Real Sea Water
The development of highly efficient and stable electrocatalysts at an affordable cost is an essential component for the large‐scale implementation of green hydrogen production. In this work, the fabrication of porous CoMnB electrocatalyst is demonstrated with the incorporation of boron into the Co‐Mn matrix by an electrochemical approach for bifunctional water electrocatalysis for the first time. The optimized CoMnB electrocatalyst demonstrates an excellent bifunctionality with a low 2‐E turnover voltage of 1.59 V at 20 mA cm−2 in 1 m KOH. The CoMnB shows a comparable water‐splitting current at low current range as compared with the standard benchmark electrodes of Pt/C||RuO2 in 1 m KOH. Then, the CoMnB outperforms the benchmarks at above 800 mA cm−2, indicating a better H2 and O2 generation performance at the industrial operational condition of high current range. The CoMnB also exhibits superior electrocatalytic activity in real sea water +1 m KOH. In addition, the porous CoMnB electrocatalyst exhibits an excellent stability with stable current for continuous 72 h operation at high current and excellent repeatability after 1000 cycles. The result ranks the CoMnB as one of the best transition metal‐based water‐splitting electrocatalysts at low cost with an easy fabrication approach.
- 30 July 2022
- Published by Wiley in Advanced Sustainable Systems
- Vol. 6 (9)
Higher Water‐Splitting Performance of Boron‐Based Porous CoMnB Electrocatalyst over the Benchmarks at High Current in 1 m KOH and Real Sea Water
The development of highly efficient and stable electrocatalysts at an affordable cost is an essential component for the large‐scale implementation of green hydrogen production. In this work, the fabrication of porous CoMnB electrocatalyst is demonstrated with the incorporation of boron into the Co‐Mn matrix by an electrochemical approach for bifunctional water electrocatalysis for the first time. The optimized CoMnB electrocatalyst demonstrates an excellent bifunctionality with a low 2‐E turnover voltage of 1.59 V at 20 mA cm−2 in 1 m KOH. The CoMnB shows a comparable water‐splitting current at low current range as compared with the standard benchmark electrodes of Pt/C||RuO2 in 1 m KOH. Then, the CoMnB outperforms the benchmarks at above 800 mA cm−2, indicating a better H2 and O2 generation performance at the industrial operational condition of high current range. The CoMnB also exhibits superior electrocatalytic activity in real sea water +1 m KOH. In addition, the porous CoMnB electrocatalyst exhibits an excellent stability with stable current for continuous 72 h operation at high current and excellent repeatability after 1000 cycles. The result ranks the CoMnB as one of the best transition metal‐based water‐splitting electrocatalysts at low cost with an easy fabrication approach.
- 13 May 2022
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 24 (22) , 4134-4143
Surmounting the interband threshold limit by the hot electron excitation of multi-metallic plasmonic AgAuCu NPs for UV photodetector application
Multi-metallic alloy NPs composed of various elemental compositions can surmount the interband threshold limit of mono-metallic NPs and thus can offer a promising route to boost up the performance limit of conventional ultraviolet photodetectors (PDs). In this work, a hybrid UV-PD configuration has been demonstrated by combining the multi-metallic plasmonic alloy NPs of AgCu, AuCu, and AgAuCu on a GaN photoactive layer in order to exploit the improved photo carrier injection by the strong hot electrons and LSPR. Among various devices, the tri-metallic AgAuCu NP PD demonstrates the highest performance with a remarkably high photocurrent of 1.47 × 10−2 A at 1 V with fast rise (Tr) and fall (Tf) times of 170 and 700 ms with a very stable current. This leads to the superior figure-of-merit parameters of the PD with a photoresponsivity of 4.3 × 106 mA W−1, detectivity of 3.52 × 1012 Jones and EQE of 1.39 × 106%, which is ∼16 times higher than the bare GaN PD. This ranks the AgAuCu PD as one of the best GaN based UV photodetectors. The photocurrent enhancement and excellent figure-of-merit can be attributed to the significantly increased photo carrier injection by the efficient hot electron generation via the LSPR and improved interfacial barrier characteristics by the tri-metallic elemental synergy.
- 13 May 2022
- Published by Royal Society of Chemistry (RSC) in CrystEngComm
- Vol. 24 (22) , 4134-4143
Surmounting the interband threshold limit by the hot electron excitation of multi-metallic plasmonic AgAuCu NPs for UV photodetector application
Multi-metallic alloy NPs composed of various elemental compositions can surmount the interband threshold limit of mono-metallic NPs and thus can offer a promising route to boost up the performance limit of conventional ultraviolet photodetectors (PDs). In this work, a hybrid UV-PD configuration has been demonstrated by combining the multi-metallic plasmonic alloy NPs of AgCu, AuCu, and AgAuCu on a GaN photoactive layer in order to exploit the improved photo carrier injection by the strong hot electrons and LSPR. Among various devices, the tri-metallic AgAuCu NP PD demonstrates the highest performance with a remarkably high photocurrent of 1.47 × 10−2 A at 1 V with fast rise (Tr) and fall (Tf) times of 170 and 700 ms with a very stable current. This leads to the superior figure-of-merit parameters of the PD with a photoresponsivity of 4.3 × 106 mA W−1, detectivity of 3.52 × 1012 Jones and EQE of 1.39 × 106%, which is ∼16 times higher than the bare GaN PD. This ranks the AgAuCu PD as one of the best GaN based UV photodetectors. The photocurrent enhancement and excellent figure-of-merit can be attributed to the significantly increased photo carrier injection by the efficient hot electron generation via the LSPR and improved interfacial barrier characteristics by the tri-metallic elemental synergy.
- Open Access
- 26 January 2022
- Published by Elsevier in SSRN Electronic Journal
Super-Porous Pt/CuO/Pt Hybrid Platform for Ultra-Sensitive and Selective H 2O 2 Detection
A super-porous Pt/CuO/Pt hybrid electrode is demonstrated with the extremely high sensing performance parameters for the hydrogen peroxide (H2O2) detection. A unique physiochemical approach is adapted for the fabrication of 3-D super-porous Pt/CuO/Pt sensing platform. The super-porous CuO layer is fabricated by a dynamic hydrogen bubbling technique of electrochemical deposition and metallic Pt NP decoration is achieved by the physical vapor deposition (PVD) and post-annealing. The super-porous CuO layer offers a drastically improved electrochemical active surface area, and the Pt NP decoration offers a significantly improved conductivity and improved charge accumulation for the H2O2 reduction. The demonstrated super-porous Pt/CuO/Pt hybrid platform demonstrates a superior sensitivity of 16,694 µA mM-1 cm-2 with a limit of detection of 2.91 nM (S/N = 3). It also demonstrates an excellent selectivity against the interfering molecules such as NaCl, fructose, ascorbic acid, citric acid, dopamine and glucose with a wide linear range. The demonstrated performance ranks the Pt/CuO/Pt hybrid platform as one of the best H2O2 sensors as summarized in the table 2. The DFT simulations confirm the predominance of CuO over Cu2O and Pt over Pd for the H2O2 detection based on the adsorption energy, density of states and charge accumulation calculations.
- 26 January 2022
- Published by Elsevier in SSRN Electronic Journal
Open AccessSuper-Porous Pt/CuO/Pt Hybrid Platform for Ultra-Sensitive and Selective H 2O 2 Detection
A super-porous Pt/CuO/Pt hybrid electrode is demonstrated with the extremely high sensing performance parameters for the hydrogen peroxide (H2O2) detection. A unique physiochemical approach is adapted for the fabrication of 3-D super-porous Pt/CuO/Pt sensing platform. The super-porous CuO layer is fabricated by a dynamic hydrogen bubbling technique of electrochemical deposition and metallic Pt NP decoration is achieved by the physical vapor deposition (PVD) and post-annealing. The super-porous CuO layer offers a drastically improved electrochemical active surface area, and the Pt NP decoration offers a significantly improved conductivity and improved charge accumulation for the H2O2 reduction. The demonstrated super-porous Pt/CuO/Pt hybrid platform demonstrates a superior sensitivity of 16,694 µA mM-1 cm-2 with a limit of detection of 2.91 nM (S/N = 3). It also demonstrates an excellent selectivity against the interfering molecules such as NaCl, fructose, ascorbic acid, citric acid, dopamine and glucose with a wide linear range. The demonstrated performance ranks the Pt/CuO/Pt hybrid platform as one of the best H2O2 sensors as summarized in the table 2. The DFT simulations confirm the predominance of CuO over Cu2O and Pt over Pd for the H2O2 detection based on the adsorption energy, density of states and charge accumulation calculations.
- 18 January 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (3) , 3289-3302
MoS2 Nanoflake and ZnO Quantum Dot Blended Active Layers on AuPd Nanoparticles for UV Photodetectors
- 18 January 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (3) , 3289-3302
MoS2 Nanoflake and ZnO Quantum Dot Blended Active Layers on AuPd Nanoparticles for UV Photodetectors