Mengyuan Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mengyuan Sun has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Jiangchen Li
College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China
5 shared publications - Yong Tian
College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
4 shared publications - Can Xu
College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
2 shared publications - Shucai Xu
Suzhou Automotive Research Institute, Tsinghua University, Suzhou 215134, China
2 shared publications Yong Tian
College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing, 211106, China
2 shared publications- Chao Li
College of Civil Aviation, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
1 shared publication
Latest Publications
- Open Access
- 11 August 2026
- Published by MDPI AG in Electronics
- Vol. 15 (16) , 3574
A New Integrated Signal-Constrained Optimal Velocity Method for Mixed-Traffic Flow in a Connected-Vehicle Environment
In signalized urban road networks, periodic signal phase switching is a key factor influencing traffic-flow stability and operational efficiency. With the rapid development of Connected and Automated Vehicle (CAV) technologies, exploiting their enhanced perception, communication, and cooperative control capabilities has become an important research topic. To characterize the acceleration, deceleration, queueing, and discharge disturbances induced by signal phase transitions, this study proposes a Signal-Constrained Optimal Velocity Model (SC-OVM). By introducing a continuous signal decision function, the proposed model dynamically couples traffic signal states with vehicle-following behavior, including preceding-vehicle following and stop-line tracking within a unified optimal-velocity framework. Furthermore, linear stability analysis, boundary critical condition analysis, and disturbance probability modeling are integrated to reveal the instability mechanism caused by abrupt signal phase transitions, with extensions to stochastic prediction errors and adaptive Signal Phase and Timing (SPaT) inputs. Numerical simulations show that SC-OVM-controlled CAVs can smooth vehicle trajectories, reduce average delay, improve end-of-green passing performance, and achieve a balanced performance in efficiency, stability, and safety compared with the Full Velocity Difference Model (FVDM), Virtual Leading Vehicle model (VLV), and Intelligent Driver Model (IDM). The findings provide theoretical support and practical insights for stability modeling and cooperative control of mixed-traffic flow at signalized intersections.
- 11 August 2026
- Published by MDPI AG in Electronics
- Vol. 15 (16) , 3574
Open AccessA New Integrated Signal-Constrained Optimal Velocity Method for Mixed-Traffic Flow in a Connected-Vehicle Environment
In signalized urban road networks, periodic signal phase switching is a key factor influencing traffic-flow stability and operational efficiency. With the rapid development of Connected and Automated Vehicle (CAV) technologies, exploiting their enhanced perception, communication, and cooperative control capabilities has become an important research topic. To characterize the acceleration, deceleration, queueing, and discharge disturbances induced by signal phase transitions, this study proposes a Signal-Constrained Optimal Velocity Model (SC-OVM). By introducing a continuous signal decision function, the proposed model dynamically couples traffic signal states with vehicle-following behavior, including preceding-vehicle following and stop-line tracking within a unified optimal-velocity framework. Furthermore, linear stability analysis, boundary critical condition analysis, and disturbance probability modeling are integrated to reveal the instability mechanism caused by abrupt signal phase transitions, with extensions to stochastic prediction errors and adaptive Signal Phase and Timing (SPaT) inputs. Numerical simulations show that SC-OVM-controlled CAVs can smooth vehicle trajectories, reduce average delay, improve end-of-green passing performance, and achieve a balanced performance in efficiency, stability, and safety compared with the Full Velocity Difference Model (FVDM), Virtual Leading Vehicle model (VLV), and Intelligent Driver Model (IDM). The findings provide theoretical support and practical insights for stability modeling and cooperative control of mixed-traffic flow at signalized intersections.
- Open Access
- 16 December 2025
- Published by Springer Nature in Artificial Intelligence Review
- Vol. 59 (1) , 36
A review of network delay prediction and advances in large language models for air traffic
- 16 December 2025
- Published by Springer Nature in Artificial Intelligence Review
- Vol. 59 (1) , 36
Open AccessA review of network delay prediction and advances in large language models for air traffic
- 9 August 2025
- Published by Elsevier in Journal of Environmental Management
- Vol. 392, 126751
Carbon policy and its impact on optimizing large-scale green networks for long-term fuel consumption: A unified approach
- 9 August 2025
- Published by Elsevier in Journal of Environmental Management
- Vol. 392, 126751
Carbon policy and its impact on optimizing large-scale green networks for long-term fuel consumption: A unified approach
- Open Access
- 30 November 2023
- Published by Institution of Engineering and Technology (IET) in IET Intelligent Transport Systems
- Vol. 18 (2) , 346-376
A multi‐emission‐driven efficient network design for green hub‐and‐spoke airline networks
The green hub‐and‐spoke airline network (GHSAN) is emerging as a dominant feature due to its excellent economic and environmental‐friendly capabilities. However, environmental GHSAN designs still have some concerns, including single pollutant‐domain oversimplification and lack of comprehensive network‐level operation impacts. This paper proposes a multi‐emission‐driven efficient network design approach for GHSAN, utilizing a system, green, and user threefold optimization methodology. The approach includes a multi‐objective optimization model and a two‐layer solving method. The multi‐objective optimization aims at minimizing multiple emissions, including carbon dioxide, carbonic oxide hydrocarbon, and nitric oxide, while also considering transportation system costs and journey user costs. A two‐layer optimization algorithm is adopted to address different scales of optimization. Real‐world results demonstrate that the proposed method mitigates environmental impact and user costs and increases overall airline density in airline networks. The proposed method can have a 16.29% reduction in green‐fold (10 nodes) and a 12.06% decrease in user costs for the user‐fold (10 nodes). As the number of nodes (15, 25, 50 nodes) and hubs (3, 4, 5, 6, 7 hubs) increase, the genetic algorithm (GA) proves to be more efficient and suitable in large‐scale GHSAN. This work is further significant for the long‐term and sustainable development of the future air transport industry.
- 30 November 2023
- Published by Institution of Engineering and Technology (IET) in IET Intelligent Transport Systems
- Vol. 18 (2) , 346-376
Open AccessA multi‐emission‐driven efficient network design for green hub‐and‐spoke airline networks
The green hub‐and‐spoke airline network (GHSAN) is emerging as a dominant feature due to its excellent economic and environmental‐friendly capabilities. However, environmental GHSAN designs still have some concerns, including single pollutant‐domain oversimplification and lack of comprehensive network‐level operation impacts. This paper proposes a multi‐emission‐driven efficient network design approach for GHSAN, utilizing a system, green, and user threefold optimization methodology. The approach includes a multi‐objective optimization model and a two‐layer solving method. The multi‐objective optimization aims at minimizing multiple emissions, including carbon dioxide, carbonic oxide hydrocarbon, and nitric oxide, while also considering transportation system costs and journey user costs. A two‐layer optimization algorithm is adopted to address different scales of optimization. Real‐world results demonstrate that the proposed method mitigates environmental impact and user costs and increases overall airline density in airline networks. The proposed method can have a 16.29% reduction in green‐fold (10 nodes) and a 12.06% decrease in user costs for the user‐fold (10 nodes). As the number of nodes (15, 25, 50 nodes) and hubs (3, 4, 5, 6, 7 hubs) increase, the genetic algorithm (GA) proves to be more efficient and suitable in large‐scale GHSAN. This work is further significant for the long‐term and sustainable development of the future air transport industry.
- 10 November 2023
- Published by Elsevier in Expert Systems with Applications
- Vol. 240
Transport causality knowledge-guided GCN for propagated delay prediction in airport delay propagation networks
- 10 November 2023
- Published by Elsevier in Expert Systems with Applications
- Vol. 240
Transport causality knowledge-guided GCN for propagated delay prediction in airport delay propagation networks
- Open Access
- 22 April 2021
- Published by Wiley in Discrete Dynamics in Nature and Society
- Vol. 2021, 1-19
Study on Arrival Aircraft Sequencing Based on Optimization of Point Merge Procedure
With the air transport industry developing dramatically, the problem of flight congestion in the terminal area (TMA) has been aggravated. Particularly for arrival aircraft, the extraholding and delay not only increase the workload of air traffic controllers and aircrew but also reduce the operational efficiency. To struggle with this issue, it is crucial to study how to improve the operational efficiency of arrival aircraft. Under the background of the rapid promotion of Point Merge (PM) procedure program in the busy TMAs in the world, this paper firstly combines the optimization of PM procedure and arrival aircraft sequencing, aiming to maximize the operational benefits of arrival aircraft in TMA. Firstly, the framework of the PM procedure is set up to replace the traditional approach route known as Standard Instrument Arrival (STAR). After that, the PM procedure optimization model is established to provide a better approach route for each arrival aircraft. Then for a flow of arrival traffic, an aircraft sequencing model is established to readjust the landing sequence of arrival aircraft, thus further improving the operational benefits of arrival aircraft. Finally, taking the TMA of Shanghai Hongqiao International Airport as the case, we compare the impact of different flight procedures and different landing sequences on the operational benefits of arrival aircraft. The experimental results show that the application of the PM procedure optimization model and sequencing model can effectively improve the operational benefits on the premise of ensuring safety, thus realizing the safe and orderly approach in TMA.
- 22 April 2021
- Published by Wiley in Discrete Dynamics in Nature and Society
- Vol. 2021, 1-19
Open AccessStudy on Arrival Aircraft Sequencing Based on Optimization of Point Merge Procedure
With the air transport industry developing dramatically, the problem of flight congestion in the terminal area (TMA) has been aggravated. Particularly for arrival aircraft, the extraholding and delay not only increase the workload of air traffic controllers and aircrew but also reduce the operational efficiency. To struggle with this issue, it is crucial to study how to improve the operational efficiency of arrival aircraft. Under the background of the rapid promotion of Point Merge (PM) procedure program in the busy TMAs in the world, this paper firstly combines the optimization of PM procedure and arrival aircraft sequencing, aiming to maximize the operational benefits of arrival aircraft in TMA. Firstly, the framework of the PM procedure is set up to replace the traditional approach route known as Standard Instrument Arrival (STAR). After that, the PM procedure optimization model is established to provide a better approach route for each arrival aircraft. Then for a flow of arrival traffic, an aircraft sequencing model is established to readjust the landing sequence of arrival aircraft, thus further improving the operational benefits of arrival aircraft. Finally, taking the TMA of Shanghai Hongqiao International Airport as the case, we compare the impact of different flight procedures and different landing sequences on the operational benefits of arrival aircraft. The experimental results show that the application of the PM procedure optimization model and sequencing model can effectively improve the operational benefits on the premise of ensuring safety, thus realizing the safe and orderly approach in TMA.
- Open Access
- 6 January 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (2) , 465
Environmental Impact and External Costs Associated with Hub-and-Spoke Network in Air Transport
Under the background of economic globalization, the air transport industry developed rapidly. It turns out that the city-to-city network has not been able to adapt well to the development of the society, and the hub-and-spoke network came into being. The hub-and-spoke network demonstrates the advantages of reducing the operating costs of airlines to keep a competitive advantage, and by maintaining the interests of airlines in the rapidly developing context. However, during the operation of aircrafts, they consume fuel and spew a great deal of harmful pollutants into the air, which has an adverse impact on the living environment. This paper explores the impact and external costs associated with hub-and-spoke network in air transport from an environmental perspective. With some mathematical models, we construct a hub-and-spoke network and take a quantitative study on the environmental impact of air transport. For calculating pollutant emissions, meteorological conditions were considered to revise the pollutant emission factors of the Engine Emissions Data Base (EEDB) published by International Civil Aviation Organization (ICAO). The environmental external costs measurement model is employed to calculate the externality of toxic gas and greenhouse gas (GHG). In order to make the study more convincing, two alternative networks are computed: hub-and-spoke network and city-to-city network. It is found that the hub-and-spoke network is associated with poorer environmental impact and environmental external costs because of the different network characteristics and the scale of the fleets. Therefore, under the general trend of green aviation, the environmental impact and environmental external costs associated with hub-and-spoke network in air transport provides a certain reference for airlines’ strategic decision-making.
- 6 January 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (2) , 465
Open AccessEnvironmental Impact and External Costs Associated with Hub-and-Spoke Network in Air Transport
Under the background of economic globalization, the air transport industry developed rapidly. It turns out that the city-to-city network has not been able to adapt well to the development of the society, and the hub-and-spoke network came into being. The hub-and-spoke network demonstrates the advantages of reducing the operating costs of airlines to keep a competitive advantage, and by maintaining the interests of airlines in the rapidly developing context. However, during the operation of aircrafts, they consume fuel and spew a great deal of harmful pollutants into the air, which has an adverse impact on the living environment. This paper explores the impact and external costs associated with hub-and-spoke network in air transport from an environmental perspective. With some mathematical models, we construct a hub-and-spoke network and take a quantitative study on the environmental impact of air transport. For calculating pollutant emissions, meteorological conditions were considered to revise the pollutant emission factors of the Engine Emissions Data Base (EEDB) published by International Civil Aviation Organization (ICAO). The environmental external costs measurement model is employed to calculate the externality of toxic gas and greenhouse gas (GHG). In order to make the study more convincing, two alternative networks are computed: hub-and-spoke network and city-to-city network. It is found that the hub-and-spoke network is associated with poorer environmental impact and environmental external costs because of the different network characteristics and the scale of the fleets. Therefore, under the general trend of green aviation, the environmental impact and environmental external costs associated with hub-and-spoke network in air transport provides a certain reference for airlines’ strategic decision-making.