Hafsa Farooq
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Hafsa Farooq has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Sanjay Nimbalkar
School of Civil and Environmental Engineering, University of Technology Sydney (UTS), Ultimo, Australia
7 shared publications - Piyush Punetha
University of Technology Sydney (UTS)
2 shared publications - Akshay Sakhare
Department of Civil Engineering, Indian Institute of Technology Madras, Chennai 600036, India
1 shared publication Bitang Zhu
1 shared publicationDaichao Sheng
1 shared publication- Daichao Sheng
School of Civil and Environmental Engineering, University of Technology Sydney, Ultimo, Australia
1 shared publication
Latest Publications
- Open Access
- 3 August 2026
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 44 (6) , 324
Integrated Viscoelastoplastic and Finite Element Analysis of Tunnel–Track Interaction in Weak Rock: Influence of Geometry and Dynamic Loading
Underground railway systems provide a vital solution to urban spatial constraints, yet their construction in weak rock formations poses severe geotechnical challenges. Issues such as ground settlement and tunnel deformation under dynamic train loads can compromise structural integrity and operational safety. This study addresses these complexities by integrating a novel two-dimensional Finite Element model with a complementary viscoelastoplastic analytical framework. This dual approach effectively correlates global dynamic responses with localised continuum effects. A detailed parametric study reveals that axle loads exert a more pronounced effect on the track structure than the tunnel lining, increasing track displacement by 23.9% compared to only 12.3% for the lining. At high operational speeds, the numerical analysis identifies a stability plateau attributed to radiation damping, while the analytical model predicts a conservative upper-bound response. The analysis further demonstrates that increasing the Young’s modulus of the surrounding rock beyond 1000 MPa reduces vertical displacement to negligible levels. Geometrically, while circular cross-sections offer superior radial confinement, they exhibit an 18.5% increase in localised invert settlement compared to horseshoe profiles due to a punching shear mechanism. By establishing a mechanical hierarchy, this study provides engineers with a strategy to use analytical methods for safety baselines and numerical modelling for realistic serviceability limits.
- 3 August 2026
- Published by Springer Nature in Geotechnical and Geological Engineering
- Vol. 44 (6) , 324
Open AccessIntegrated Viscoelastoplastic and Finite Element Analysis of Tunnel–Track Interaction in Weak Rock: Influence of Geometry and Dynamic Loading
Underground railway systems provide a vital solution to urban spatial constraints, yet their construction in weak rock formations poses severe geotechnical challenges. Issues such as ground settlement and tunnel deformation under dynamic train loads can compromise structural integrity and operational safety. This study addresses these complexities by integrating a novel two-dimensional Finite Element model with a complementary viscoelastoplastic analytical framework. This dual approach effectively correlates global dynamic responses with localised continuum effects. A detailed parametric study reveals that axle loads exert a more pronounced effect on the track structure than the tunnel lining, increasing track displacement by 23.9% compared to only 12.3% for the lining. At high operational speeds, the numerical analysis identifies a stability plateau attributed to radiation damping, while the analytical model predicts a conservative upper-bound response. The analysis further demonstrates that increasing the Young’s modulus of the surrounding rock beyond 1000 MPa reduces vertical displacement to negligible levels. Geometrically, while circular cross-sections offer superior radial confinement, they exhibit an 18.5% increase in localised invert settlement compared to horseshoe profiles due to a punching shear mechanism. By establishing a mechanical hierarchy, this study provides engineers with a strategy to use analytical methods for safety baselines and numerical modelling for realistic serviceability limits.
- Open Access
- 26 June 2026
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (9) , 4450-4468
Advanced Predictive Modeling Techniques for Railway Tracks in Critical Zones, Tunnels and High-Speed Rail Corridors
Accurate prediction of railway track behavior under train-induced loading is a fundamental prerequisite for effective infrastructure design and maintenance planning. This is particularly critical for high-speed rail (HSR), tunnels and critical zones such as bridge approaches where dynamic forces and long-term performance requirements pose significant engineering challenges. This article presents recent advancements in computational modeling techniques aimed at addressing these challenges. It begins with a review of analytical methods for evaluating track response under train-induced dynamic loads. A novel rheological modeling framework is then introduced to simulate the long-term behavior of railway tracks in critical zones such as normal track-bridge transitions. Subsequently, this framework is extended to evaluate the response of a tunnel-track system constructed in weak strata. Finally, the finite element method is utilized to compare the mechanical performance of ballasted and ballastless tracks, offering critical insights into optimal track system selection for HSR applications. The results reveal that the application of cellular synthetic inclusions can curtail the differential settlement at transition zones by 30‒43%. Furthermore, the tunnel-track system identifies a design threshold where increasing the invert thickness from 0.02 m to 0.05 m reduces the peak bending moment by approximately 23%. Under HSR cyclic loading conditions, ballastless tracks display 95% lower initial surface elastic displacement and a 26-fold reduction in long-term cumulative settlement compared to conventional ballasted tracks. The findings reported in this study contribute to a better understanding of the complex engineering challenges associated with modern rail infrastructure. Furthermore, they offer advanced predictive modeling tools essential for the design of resilient and sustainable railways in HSR corridors, urban metros, and critical transition zones.
- 26 June 2026
- Published by Springer Nature in Indian Geotechnical Journal
- Vol. 56 (9) , 4450-4468
Open AccessAdvanced Predictive Modeling Techniques for Railway Tracks in Critical Zones, Tunnels and High-Speed Rail Corridors
Accurate prediction of railway track behavior under train-induced loading is a fundamental prerequisite for effective infrastructure design and maintenance planning. This is particularly critical for high-speed rail (HSR), tunnels and critical zones such as bridge approaches where dynamic forces and long-term performance requirements pose significant engineering challenges. This article presents recent advancements in computational modeling techniques aimed at addressing these challenges. It begins with a review of analytical methods for evaluating track response under train-induced dynamic loads. A novel rheological modeling framework is then introduced to simulate the long-term behavior of railway tracks in critical zones such as normal track-bridge transitions. Subsequently, this framework is extended to evaluate the response of a tunnel-track system constructed in weak strata. Finally, the finite element method is utilized to compare the mechanical performance of ballasted and ballastless tracks, offering critical insights into optimal track system selection for HSR applications. The results reveal that the application of cellular synthetic inclusions can curtail the differential settlement at transition zones by 30‒43%. Furthermore, the tunnel-track system identifies a design threshold where increasing the invert thickness from 0.02 m to 0.05 m reduces the peak bending moment by approximately 23%. Under HSR cyclic loading conditions, ballastless tracks display 95% lower initial surface elastic displacement and a 26-fold reduction in long-term cumulative settlement compared to conventional ballasted tracks. The findings reported in this study contribute to a better understanding of the complex engineering challenges associated with modern rail infrastructure. Furthermore, they offer advanced predictive modeling tools essential for the design of resilient and sustainable railways in HSR corridors, urban metros, and critical transition zones.
- Open Access
- 17 March 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (4) , 208
Seismic analysis of railway tunnels in weak rock formations using a viscoelastoplastic approach
Underground railway tunnels are essential for urban transportation, yet they are significantly vulnerable to seismic forces, particularly in weak rock conditions. Ensuring their resilience and structural integrity during and after earthquakes is critical for operational safety and continuity. This study investigates the seismic behaviour of railway tunnels embedded in weak rock masses using a computational approach employing a novel viscoelastoplastic rheological model. The model simulates the dynamic response of the surrounding weak rock under earthquake loading, with lateral seismic forces determined via a pseudo-static method. A case study is conducted using field measurements from the Jinpingyan Tunnel, a high-speed railway tunnel situated in a seismically active region with weak rock. Parametric studies evaluate the influence of key factors, including rock mass density, primary wave (dispersion) velocity, and tunnel geometry. The study highlights the depth-dependent nature of seismic response and indicates that the tunnel geometric properties substantially impact stress distribution and deformation. This research presents a straightforward, rapid, and practical approach for evaluating the seismic vulnerability of tunnels in weak rock, offering valuable insights for optimising tunnel design and material selection to enhance the seismic resilience of underground railway systems in earthquake-prone areas.
- 17 March 2026
- Published by Springer Nature in Bulletin of Engineering Geology and the Environment
- Vol. 85 (4) , 208
Open AccessSeismic analysis of railway tunnels in weak rock formations using a viscoelastoplastic approach
Underground railway tunnels are essential for urban transportation, yet they are significantly vulnerable to seismic forces, particularly in weak rock conditions. Ensuring their resilience and structural integrity during and after earthquakes is critical for operational safety and continuity. This study investigates the seismic behaviour of railway tunnels embedded in weak rock masses using a computational approach employing a novel viscoelastoplastic rheological model. The model simulates the dynamic response of the surrounding weak rock under earthquake loading, with lateral seismic forces determined via a pseudo-static method. A case study is conducted using field measurements from the Jinpingyan Tunnel, a high-speed railway tunnel situated in a seismically active region with weak rock. Parametric studies evaluate the influence of key factors, including rock mass density, primary wave (dispersion) velocity, and tunnel geometry. The study highlights the depth-dependent nature of seismic response and indicates that the tunnel geometric properties substantially impact stress distribution and deformation. This research presents a straightforward, rapid, and practical approach for evaluating the seismic vulnerability of tunnels in weak rock, offering valuable insights for optimising tunnel design and material selection to enhance the seismic resilience of underground railway systems in earthquake-prone areas.
- Open Access
- 6 December 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 191
Geotechnical Rheological Modelling of Integrated Train-Track-Bridge System using a Viscoelastoplastic Approach
- 6 December 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 191
Open AccessGeotechnical Rheological Modelling of Integrated Train-Track-Bridge System using a Viscoelastoplastic Approach
- Open Access
- 21 June 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 186
Viscoelastoplastic model for an integrated tunnel-track system in weak rock formations
- 21 June 2025
- Published by Elsevier in Computers and Geotechnics
- Vol. 186
Open AccessViscoelastoplastic model for an integrated tunnel-track system in weak rock formations
- Open Access
- 21 June 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 11 (5) , 3667-3693
Viscoelastic Rheological Modelling of the Lateral Dynamic Response of Ballasted Railway Tracks
This article presents a novel methodology for evaluating the response of ballasted railway tracks under train-induced loading along lateral directions. The main focus of this study is the development of a computational technique that can capture the lateral response of ballasted railway tracks, which has been ignored in past studies. The proposed approach employs a viscoelastic rheological track model in which three substructure layers are simulated using discrete masses, Hooke’s (springs) and Newtonian elements (dampers). The methodology is successfully validated against the data from experimental and analytical investigations published in the literature. Subsequently, parametric investigations are conducted to study the influence of axle load, train speed, and granular layer thickness on the track response. The results indicate that as the axle load (20 to 40 t) and train speed (70 to 200 km/h) are increased, there is a corresponding increase in track displacements (both lateral and vertical) by 100% and 26.2%, respectively. However, an increase in the granular layer thickness (0.1 to 0.75 m) reduces ballast top displacement (lateral and vertical) by 20–30%. The results demonstrate the capability of the proposed computational approach to capture the transient response of railway tracks and the influence of neighbouring layer properties on the track response. The proposed methodology can be helpful to practising railway engineers for assessing the performance of ballasted railway tracks along lateral directions.
- 21 June 2024
- Published by Springer Nature in Transportation Infrastructure Geotechnology
- Vol. 11 (5) , 3667-3693
Open AccessViscoelastic Rheological Modelling of the Lateral Dynamic Response of Ballasted Railway Tracks
This article presents a novel methodology for evaluating the response of ballasted railway tracks under train-induced loading along lateral directions. The main focus of this study is the development of a computational technique that can capture the lateral response of ballasted railway tracks, which has been ignored in past studies. The proposed approach employs a viscoelastic rheological track model in which three substructure layers are simulated using discrete masses, Hooke’s (springs) and Newtonian elements (dampers). The methodology is successfully validated against the data from experimental and analytical investigations published in the literature. Subsequently, parametric investigations are conducted to study the influence of axle load, train speed, and granular layer thickness on the track response. The results indicate that as the axle load (20 to 40 t) and train speed (70 to 200 km/h) are increased, there is a corresponding increase in track displacements (both lateral and vertical) by 100% and 26.2%, respectively. However, an increase in the granular layer thickness (0.1 to 0.75 m) reduces ballast top displacement (lateral and vertical) by 20–30%. The results demonstrate the capability of the proposed computational approach to capture the transient response of railway tracks and the influence of neighbouring layer properties on the track response. The proposed methodology can be helpful to practising railway engineers for assessing the performance of ballasted railway tracks along lateral directions.
- Open Access
- 30 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4118
Dynamic Behavior of the Transition Zone of an Integral Abutment Bridge
Weaker sections of a railway track, such as the approach sections, are prone to differential settlement under the action of repeated train loads. The railway tracks degrade more quickly at a critical section adjacent to a traditional rail bridge because of progressive deterioration. Opting for an integral abutment instead of a traditional bridge is gaining importance due to its improved performance in terms of track stiffness and reduced settlement. It is essential to understand such issues with the appropriate methodologies. This study investigates the behavior of an integral abutment bridge with the transition zone subjected to train loading. Generally, the transition zone is a two-part wedge section consisting of unbound granular material and cement bound mixture. A field monitored traditional abutment bridge system is used to validate the developed two-dimensional Finite Element (FE) model. The model is further developed to simulate the dynamic behavior of the transition zone against the varying speeds of the train. The parametric study is performed on the transition zone by varying its geometric configurations and considering different materials for the backfill. The results indicate that the trapezoidal approach slab influences the track displacement significantly. The transition zone thickness and material properties of the backfill have a greater effect on the overall track response. Based on the results, the stable transition zones are identified to cater to the gradual stiffness variation during train–track interaction.
- 30 March 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (7) , 4118
Open AccessDynamic Behavior of the Transition Zone of an Integral Abutment Bridge
Weaker sections of a railway track, such as the approach sections, are prone to differential settlement under the action of repeated train loads. The railway tracks degrade more quickly at a critical section adjacent to a traditional rail bridge because of progressive deterioration. Opting for an integral abutment instead of a traditional bridge is gaining importance due to its improved performance in terms of track stiffness and reduced settlement. It is essential to understand such issues with the appropriate methodologies. This study investigates the behavior of an integral abutment bridge with the transition zone subjected to train loading. Generally, the transition zone is a two-part wedge section consisting of unbound granular material and cement bound mixture. A field monitored traditional abutment bridge system is used to validate the developed two-dimensional Finite Element (FE) model. The model is further developed to simulate the dynamic behavior of the transition zone against the varying speeds of the train. The parametric study is performed on the transition zone by varying its geometric configurations and considering different materials for the backfill. The results indicate that the trapezoidal approach slab influences the track displacement significantly. The transition zone thickness and material properties of the backfill have a greater effect on the overall track response. Based on the results, the stable transition zones are identified to cater to the gradual stiffness variation during train–track interaction.
- 6 January 2021
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 6 (1) , 1-11
A comparative study of RC bridge for evaluation of seismic performance and retrofit technology
- 6 January 2021
- Published by Springer Nature in Innovative Infrastructure Solutions
- Vol. 6 (1) , 1-11
A comparative study of RC bridge for evaluation of seismic performance and retrofit technology