Yun Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yun Huang has a total of 95 co-authors. Here are the top co-authors by number of shared publications:
- Ao Xia
Chongqing University, Ministry of Education
31 shared publications - Qiang Liao
Key Laboratory of Low-grade Energy Utilization Technologies and Systems (Chongqing University), Ministry of Education
28 shared publications - Xun Zhu
Chongqing University, Ministry of Education
26 shared publications Xianqing Zhu
Institute of Engineering Thermophysics, School of Energy and Power Engineering, Chongqing University, Chongqing 400044, China; Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Chongqing University, Ministry of Education, Chongqing 400044, China
21 shared publicationsQiang Liao
Institute of Engineering Thermophysics, School of Energy and Power Engineering, Chongqing University, Chongqing 400044, China; Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Chongqing University, Ministry of Education, Chongqing 400044, China
19 shared publicationsXun Zhu
Institute of Engineering Thermophysics, School of Energy and Power Engineering, Chongqing University, Chongqing 400044, China; Key Laboratory of Low-grade Energy Utilization Technologies and Systems, Chongqing University, Ministry of Education, Chongqing 400044, China
18 shared publications
Latest Publications
- Open Access
- 14 October 2026
- Published by Elsevier in SSRN Electronic Journal
Co@NiV-Promoted Thermoelectric Cascade for Hemicellulose Valorization and Hydrogen Evolution
Renewable electricity-driven electrocatalysis provides a novel approach for producing hydrogen and biomass-based high-value products. However, due to low solubility and recalcitrant macromolecular structure, direct biomass electrocatalysis is hindered by severe mass-transfer limitations and poor reactant/electrode interfacial accessibility. Herein, we present a cascaded thermoelectric strategy that depolymerizes xylan before selectively electrooxidizing xylose monomer to address the above-mentioned limitations. Through Co@NiV heterostructure design, the electrocatalyst reaches 100 mA cm-2 at 1.24 V vs. RHE and, under optimized electrolysis conditions, delivers a maximum formic acid yield of 93.6%, while the cathode provides 98.6% Faradaic efficiency for H2, corresponding to 9.53 mol H2-equivalent per mol xylose. Mechanism investigations identify an indirect electrochemical-chemical pathway mediated by high-valent metals, while V-induced electronic redistribution of Co@NiV strengthens interfacial xylose adsorption. The cascaded system increases formic acid yield from xylan to 72.3%, 7.1-fold higher than direct electrooxidation, establishing an integrated route for macromolecular biomass upgrading and lower-energy hydrogen production.
- 14 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCo@NiV-Promoted Thermoelectric Cascade for Hemicellulose Valorization and Hydrogen Evolution
Renewable electricity-driven electrocatalysis provides a novel approach for producing hydrogen and biomass-based high-value products. However, due to low solubility and recalcitrant macromolecular structure, direct biomass electrocatalysis is hindered by severe mass-transfer limitations and poor reactant/electrode interfacial accessibility. Herein, we present a cascaded thermoelectric strategy that depolymerizes xylan before selectively electrooxidizing xylose monomer to address the above-mentioned limitations. Through Co@NiV heterostructure design, the electrocatalyst reaches 100 mA cm-2 at 1.24 V vs. RHE and, under optimized electrolysis conditions, delivers a maximum formic acid yield of 93.6%, while the cathode provides 98.6% Faradaic efficiency for H2, corresponding to 9.53 mol H2-equivalent per mol xylose. Mechanism investigations identify an indirect electrochemical-chemical pathway mediated by high-valent metals, while V-induced electronic redistribution of Co@NiV strengthens interfacial xylose adsorption. The cascaded system increases formic acid yield from xylan to 72.3%, 7.1-fold higher than direct electrooxidation, establishing an integrated route for macromolecular biomass upgrading and lower-energy hydrogen production.
- Open Access
- 2 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (40) , 61858-61868
Integrating Machine Learning for Predictive Modeling of Carbon Sequestration in Mixed Microalgal Systems
Microalgal carbon sequestration offers an energy-efficient solution to global carbon emissions. Mixed microalgae outperform pure cultures in adaptability and carbon fixation. This study carried out mixed microalgae cultivation experiments under different experimental conditions, focusing on examining the effects of five key factors: inoculation concentration, initial inoculation ratio, nitrate concentration, CO2 gas flow rate, and CO2 concentration. In the single-variable experiment where the CO2 gas flow rate was adjusted, the maximum carbon sequestration of 5.35 g/L was achieved. An experimental data set of carbon sequestration performance characteristics of mixed microalgae under five culture conditions. The carbon sequestration performance of mixed microalgae was predicted using 13 machine learning models. The results showed that the linear model (R2 = 0.782) performed the poorest, followed by the nonlinear model (R2 = 0.941). The ensemble model (R2 = 0.950) significantly outperformed both, with random forest exhibiting the best performance.
- 2 October 2026
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 11 (40) , 61858-61868
Open AccessIntegrating Machine Learning for Predictive Modeling of Carbon Sequestration in Mixed Microalgal Systems
Microalgal carbon sequestration offers an energy-efficient solution to global carbon emissions. Mixed microalgae outperform pure cultures in adaptability and carbon fixation. This study carried out mixed microalgae cultivation experiments under different experimental conditions, focusing on examining the effects of five key factors: inoculation concentration, initial inoculation ratio, nitrate concentration, CO2 gas flow rate, and CO2 concentration. In the single-variable experiment where the CO2 gas flow rate was adjusted, the maximum carbon sequestration of 5.35 g/L was achieved. An experimental data set of carbon sequestration performance characteristics of mixed microalgae under five culture conditions. The carbon sequestration performance of mixed microalgae was predicted using 13 machine learning models. The results showed that the linear model (R2 = 0.782) performed the poorest, followed by the nonlinear model (R2 = 0.941). The ensemble model (R2 = 0.950) significantly outperformed both, with random forest exhibiting the best performance.
- 18 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20260-20273
Mild Mechanochemical Pretreatment of Wheat Straw for High Exergy Efficiency to Promote Efficient Enzymatic Hydrolysis and Saccharification
This study proposed a new strategy for simultaneous catalytic conversion of wheat straw with a deep eutectic solvent-assisted ball milling method at high solid content (20%) conditions, thereby improving monosaccharide yield and exergy efficiency. After mechanical shearing by ball milling, the crystallinity of wheat straw was reduced and the porosity increased by 12.7%. Meanwhile, 13C NMR and 2D HSQC NMR demonstrated that low DES loadings in this strategy can still effectively cleave β-O-4 bonds and reduce hydrogen-bond strength within cellulose molecules and LCC. Pearson correlation coefficient matrix analysis showed that increased pores from mechanical shearing and DES-induced delignification significantly promoted the saccharification rate. After 72 h of enzymatic hydrolysis, the monosaccharide concentration reached 30.7 g/L, 6.1 times that of the control. The overall exergy efficiency of wheat straw pretreated by the mechanochemical process reached 85.7%, indicating that the proposed strategy is suitable for monosaccharide production while maintaining low exergy loss and has great application potential in sustainable biorefining plants.
- 18 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20260-20273
Mild Mechanochemical Pretreatment of Wheat Straw for High Exergy Efficiency to Promote Efficient Enzymatic Hydrolysis and Saccharification
This study proposed a new strategy for simultaneous catalytic conversion of wheat straw with a deep eutectic solvent-assisted ball milling method at high solid content (20%) conditions, thereby improving monosaccharide yield and exergy efficiency. After mechanical shearing by ball milling, the crystallinity of wheat straw was reduced and the porosity increased by 12.7%. Meanwhile, 13C NMR and 2D HSQC NMR demonstrated that low DES loadings in this strategy can still effectively cleave β-O-4 bonds and reduce hydrogen-bond strength within cellulose molecules and LCC. Pearson correlation coefficient matrix analysis showed that increased pores from mechanical shearing and DES-induced delignification significantly promoted the saccharification rate. After 72 h of enzymatic hydrolysis, the monosaccharide concentration reached 30.7 g/L, 6.1 times that of the control. The overall exergy efficiency of wheat straw pretreated by the mechanochemical process reached 85.7%, indicating that the proposed strategy is suitable for monosaccharide production while maintaining low exergy loss and has great application potential in sustainable biorefining plants.
- Open Access
- 16 July 2026
- Published by Elsevier in SSRN Electronic Journal
Acidic-Site-Mediated Interfacial Interactions Promote Methanogen Adhesion and Biofilm Formation on Conductive Carriers for Anaerobic Digestion
The application of conductive substrates in anaerobic digestion has garnered growing interest due to their potential to enhance wastewater treatment performance. However, the initial attachment mechanisms governing distinct colonization across substrates remain unclear. In this study, the most commonly used conductive materials from previous research (biochar, activated carbon, magnetite, and graphite) were employed to investigate the adhesion and biofilm formation characteristics of a typical electron acceptor, Methanosarcina barkeri. Results indicate that adsorption is governed primarily by Lewis acid-base interactions between acidic functional groups on the activated carbon surface and methanochondroitin in the cellular outer layer. During early colonization, cell attachment to activated carbon was 2.3, 3.3 and 6.3 times higher than biochar, magnetite and graphite, respectively. This mechanism was corroborated by substrate modification experiments demonstrating that removing surface acidic functional groups reduced attachment capacity by 57.6%, whereas enriching carboxyl groups increased it by 116.8%. Theoretical calculations revealed that this enhancement arises from an attractive interaction energy of approximately -15 kcal/mol between methanochondroitin and carboxyl groups. Consequently, this advantage in early colonization promoted the preferential formation of a structurally mature, extracellular polymeric substances-rich biofilm on the activated carbon surface, ensuring mechanical stability under fluid shear stress and providing substantial material support for efficient electron transfer and storage. This study provides a predictive framework for substrate selection, in which tailoring surface functional-group density to match specific microbial biochemical motifs enables the development of high-performance systems, shifting the field from empirical trial and error to rational design.
- 16 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAcidic-Site-Mediated Interfacial Interactions Promote Methanogen Adhesion and Biofilm Formation on Conductive Carriers for Anaerobic Digestion
The application of conductive substrates in anaerobic digestion has garnered growing interest due to their potential to enhance wastewater treatment performance. However, the initial attachment mechanisms governing distinct colonization across substrates remain unclear. In this study, the most commonly used conductive materials from previous research (biochar, activated carbon, magnetite, and graphite) were employed to investigate the adhesion and biofilm formation characteristics of a typical electron acceptor, Methanosarcina barkeri. Results indicate that adsorption is governed primarily by Lewis acid-base interactions between acidic functional groups on the activated carbon surface and methanochondroitin in the cellular outer layer. During early colonization, cell attachment to activated carbon was 2.3, 3.3 and 6.3 times higher than biochar, magnetite and graphite, respectively. This mechanism was corroborated by substrate modification experiments demonstrating that removing surface acidic functional groups reduced attachment capacity by 57.6%, whereas enriching carboxyl groups increased it by 116.8%. Theoretical calculations revealed that this enhancement arises from an attractive interaction energy of approximately -15 kcal/mol between methanochondroitin and carboxyl groups. Consequently, this advantage in early colonization promoted the preferential formation of a structurally mature, extracellular polymeric substances-rich biofilm on the activated carbon surface, ensuring mechanical stability under fluid shear stress and providing substantial material support for efficient electron transfer and storage. This study provides a predictive framework for substrate selection, in which tailoring surface functional-group density to match specific microbial biochemical motifs enables the development of high-performance systems, shifting the field from empirical trial and error to rational design.
- 2 July 2026
- Published by Elsevier in Environmental Research
- Vol. 306, 125175
Insights into the assistance of bacteria in digested wastewater pollutants removal by microalgae from the aspect of flow and mixing characteristics
- 2 July 2026
- Published by Elsevier in Environmental Research
- Vol. 306, 125175
Insights into the assistance of bacteria in digested wastewater pollutants removal by microalgae from the aspect of flow and mixing characteristics
- 28 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (23) , 6548-6555
Ternary Deep Eutectic Solvent Enables Mild Lignin Arylation with High β-O-4 Retention and Cellulose Recovery
The persistent trade-off between carbohydrate digestibility and preservation of the native lignin structure hampers integrated lignocellulose valorization. Herein, we designed a reactive ternary deep eutectic solvent (DES) that integrated fractionation and in situ lignin arylation into a single solvent platform under mild conditions. The ternary DES redirected benzylic reactivity toward selective α-arylation, suppressing unordered condensation and yielding well-defined arylated lignin with 85.5% β-O-4' retention. Fourier transform infrared spectroscopy (FTIR), hydrogen nuclear magnetic resonance (1H NMR), density functional theory (DFT), and an independent gradient model based on Hirshfeld partition analyses consistently supported a reconfigured local hydrogen-bonding topology. The feature is a cooperative dual-donor O-H···Cl environment that likely contributed to enhanced lignocellulose fractionation efficiency and increased arylated lignin yield. The system yielded 21.4 wt % arylated lignin, versus 15.8 wt % for the formic acid-syringol control, together with 92.8% cellulose recovery. This work establishes a solvent-engineering strategy for coupling controlled lignin transformation with high carbohydrate recovery.
- 28 May 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry Letters
- Vol. 17 (23) , 6548-6555
Ternary Deep Eutectic Solvent Enables Mild Lignin Arylation with High β-O-4 Retention and Cellulose Recovery
The persistent trade-off between carbohydrate digestibility and preservation of the native lignin structure hampers integrated lignocellulose valorization. Herein, we designed a reactive ternary deep eutectic solvent (DES) that integrated fractionation and in situ lignin arylation into a single solvent platform under mild conditions. The ternary DES redirected benzylic reactivity toward selective α-arylation, suppressing unordered condensation and yielding well-defined arylated lignin with 85.5% β-O-4' retention. Fourier transform infrared spectroscopy (FTIR), hydrogen nuclear magnetic resonance (1H NMR), density functional theory (DFT), and an independent gradient model based on Hirshfeld partition analyses consistently supported a reconfigured local hydrogen-bonding topology. The feature is a cooperative dual-donor O-H···Cl environment that likely contributed to enhanced lignocellulose fractionation efficiency and increased arylated lignin yield. The system yielded 21.4 wt % arylated lignin, versus 15.8 wt % for the formic acid-syringol control, together with 92.8% cellulose recovery. This work establishes a solvent-engineering strategy for coupling controlled lignin transformation with high carbohydrate recovery.
- 26 May 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (22) , 11789-11796
Interfacial Photodriven Decarboxylation of Fatty Acids for Hydrocarbon Fuel Production
- 26 May 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (22) , 11789-11796
Interfacial Photodriven Decarboxylation of Fatty Acids for Hydrocarbon Fuel Production
- 25 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (22) , 16435-16446
Upconversion Nanoparticles Expand the Photosynthetically Active Spectrum of Microalgae into the Near-Infrared for CO 2 Biofixation
The process of photosynthetic carbon fixation by microalgae represents a significant pathway for achieving green and sustainable carbon capture. However, the mismatch between the microalgal pigments' absorption spectrum and the solar spectrum severely limits light conversion efficiency. To mitigate this limitation, NaErF4:Tm(0.5%)@NaYF4 upconversion nanoparticles were employed to facilitate the conversion of near-infrared (NIR) photons into photosynthetically active radiation. This extended the usable spectral range of microalgae beyond the conventional photosynthetically active region of 400-700 nm by converting near-infrared photons into red light that can be used for photosynthesis, thereby enhancing light conversion efficiency. The biohybrid system of microalgae integrating NaErF4:Tm(0.5%)@NaYF4 exhibited a 157.41% enhancement in light absorption in the 950-1000 nm region and a 27.98% increase in the 1500-1600 nm region, accompanied by red emission at 650-700 nm that can be efficiently utilized by microalgae. The maximum electron transport rate (ETRmax) of microalgae increased by 20.18%, while ATP and NADPH contents rose by 47.06% and 19.82%, respectively, and the maximum CO2 fixation rate increased by 94.31%. Consequently, compared with the control group, the density of the microalgal biomass rose by 19.67%, while the light conversion efficiency increased by 34.99% to reach 8.4%. This work develops a biohybrid system that enhances NIR light harvesting and photosynthetic carbon fixation, elucidates the role of NIR photon upconversion in regulating photosynthetic electron transport and metabolism in microalgae, and thereby provides a pathway for efficient microalgal photosynthetic carbon capture.
- 25 May 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (22) , 16435-16446
Upconversion Nanoparticles Expand the Photosynthetically Active Spectrum of Microalgae into the Near-Infrared for CO 2 Biofixation
The process of photosynthetic carbon fixation by microalgae represents a significant pathway for achieving green and sustainable carbon capture. However, the mismatch between the microalgal pigments' absorption spectrum and the solar spectrum severely limits light conversion efficiency. To mitigate this limitation, NaErF4:Tm(0.5%)@NaYF4 upconversion nanoparticles were employed to facilitate the conversion of near-infrared (NIR) photons into photosynthetically active radiation. This extended the usable spectral range of microalgae beyond the conventional photosynthetically active region of 400-700 nm by converting near-infrared photons into red light that can be used for photosynthesis, thereby enhancing light conversion efficiency. The biohybrid system of microalgae integrating NaErF4:Tm(0.5%)@NaYF4 exhibited a 157.41% enhancement in light absorption in the 950-1000 nm region and a 27.98% increase in the 1500-1600 nm region, accompanied by red emission at 650-700 nm that can be efficiently utilized by microalgae. The maximum electron transport rate (ETRmax) of microalgae increased by 20.18%, while ATP and NADPH contents rose by 47.06% and 19.82%, respectively, and the maximum CO2 fixation rate increased by 94.31%. Consequently, compared with the control group, the density of the microalgal biomass rose by 19.67%, while the light conversion efficiency increased by 34.99% to reach 8.4%. This work develops a biohybrid system that enhances NIR light harvesting and photosynthetic carbon fixation, elucidates the role of NIR photon upconversion in regulating photosynthetic electron transport and metabolism in microalgae, and thereby provides a pathway for efficient microalgal photosynthetic carbon capture.
- Open Access
- 20 February 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (12) , 5857-5868
Engineering a semi-artificial photosynthetic biofilm for robust and high-efficiency CO 2 -to-methane conversion
A self-assembled M. barkeri / NCN CN x /Ag hybrid biofilm drives the conversion of carbon dioxide to methane under illumination. EPSs can act as a barrier against ROS attack, while Ag nanoparticles promote electron transfer via cytochromes.
- 20 February 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (12) , 5857-5868
Open AccessEngineering a semi-artificial photosynthetic biofilm for robust and high-efficiency CO 2 -to-methane conversion
A self-assembled M. barkeri / NCN CN x /Ag hybrid biofilm drives the conversion of carbon dioxide to methane under illumination. EPSs can act as a barrier against ROS attack, while Ag nanoparticles promote electron transfer via cytochromes.