Noel A Hathaway
Research Subjects
Research Interests
Noel A Hathaway has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Robert R Tripepi
University of Idaho, Department of Plant Sciences, Moscow, ID 83844
3 shared publications - Stephen L. Love
University of Idaho, Aberdeen R & E Center, 1693 S 2700 W, Aberdeen, ID 83210
3 shared publications
Latest Publications
- 1 January 2023
- Published by University of Wisconsin Press in Native Plants Journal
- Vol. 24 (3) , 247-259
Micropropagation of Douglas maple (Acer glabrumvar.douglasii): 2. Light intensity and evaluation ofin vitroandex vitrorooting protocols
Douglas maple (Acer glabrum Torr. var. Douglasii (Hook.) Dippel [Aceraceae]) has potential for habitat development in urban landscapes. Efficacious micropropagation methodology would enhance the value of this seed recalcitrant species. Three light intensities—6.6, 16.8, and 36.6 µmols•m−2•s−1 (0.65, 1.58, and 3.44 µmols•ft−2•s−1, respectively) PPFD—were tested for their effect on Douglas maple chlorophyll content, shoot length, number of nodes, and mean dry weight. Visually, plants appeared darker green under lower light intensity. However, mean dry weight of cultured microcuttings was significantly higher at higher light intensity. We tested in vitro and ex vitro rooting procedures for their ability to produce healthy roots on established microcuttings. IBA concentration (0, 1, 2, 4, and 8 µM) and the length of the initial microcutting propagule (2.0 to 3.0 cm [0.79–1.18 in]) or 3.5 to 4.5 cm [1.38–1.77 in]) were evaluated for enhancing in vitro rooting. Initial microcutting length as a covariate and concentrations of IBA (0.1% and 0.3%) in a talcum powder formulation were evaluated for enhancement of ex vitro rooting. Rooting treatments were assessed by measuring overall survival rate of plantlets after rooting and acclimatization. Greatest survival (92%) occurred with ex vitro rooting with a 0.1% IBA talcum powder treatment. In comparison, the best in vitro rooting treatment (1 µM IBA regardless of microcutting length) yielded just 75% survival after rooting and acclimatization. We verified efficacy of the ex vitro rooting protocol (100% rooting and acclimatization) using a second Douglas maple genotype (treated with 0.1% IBA talcum powder).
- 1 January 2023
- Published by University of Wisconsin Press in Native Plants Journal
- Vol. 24 (3) , 247-259
Micropropagation of Douglas maple (Acer glabrumvar.douglasii): 2. Light intensity and evaluation ofin vitroandex vitrorooting protocols
Douglas maple (Acer glabrum Torr. var. Douglasii (Hook.) Dippel [Aceraceae]) has potential for habitat development in urban landscapes. Efficacious micropropagation methodology would enhance the value of this seed recalcitrant species. Three light intensities—6.6, 16.8, and 36.6 µmols•m−2•s−1 (0.65, 1.58, and 3.44 µmols•ft−2•s−1, respectively) PPFD—were tested for their effect on Douglas maple chlorophyll content, shoot length, number of nodes, and mean dry weight. Visually, plants appeared darker green under lower light intensity. However, mean dry weight of cultured microcuttings was significantly higher at higher light intensity. We tested in vitro and ex vitro rooting procedures for their ability to produce healthy roots on established microcuttings. IBA concentration (0, 1, 2, 4, and 8 µM) and the length of the initial microcutting propagule (2.0 to 3.0 cm [0.79–1.18 in]) or 3.5 to 4.5 cm [1.38–1.77 in]) were evaluated for enhancing in vitro rooting. Initial microcutting length as a covariate and concentrations of IBA (0.1% and 0.3%) in a talcum powder formulation were evaluated for enhancement of ex vitro rooting. Rooting treatments were assessed by measuring overall survival rate of plantlets after rooting and acclimatization. Greatest survival (92%) occurred with ex vitro rooting with a 0.1% IBA talcum powder treatment. In comparison, the best in vitro rooting treatment (1 µM IBA regardless of microcutting length) yielded just 75% survival after rooting and acclimatization. We verified efficacy of the ex vitro rooting protocol (100% rooting and acclimatization) using a second Douglas maple genotype (treated with 0.1% IBA talcum powder).
- 1 January 2023
- Published by University of Wisconsin Press in Native Plants Journal
- Vol. 24 (3) , 234-246
In vitropropagation of Douglas maple (Acer glabrumvar.douglasii): 1. Role of basal medium formulation and concentrations of supplemental minerals and cytokinin on optimization of shoot multiplication
Douglas maple (Acer glabrum Torr. var. douglasii (Hook.) Dippel [Aceraceae]) is a potentially valuable landscape plant that lacks efficacious asexual propagation protocols. We conducted a series of developmental experiments to evaluate basal salts, supplemental minerals, and cytokinins to optimize culture medium formulations. Three commercial formulations of basal salts were evaluated, Driver and Kuniyaki Walnut (DKW), Murashige and Skoog (MS), and Woody Plant Medium (WPM). The DKW medium was superior to the other commercially available nutrient formulations for promoting shoot growth and enhancing node production. Iron supplementation (addition of 45 mg/l) resolved issues of chlorosis associated with reduced microcutting growth and multiplication rates. Supplementation of 12.0 mg/l boric acid resolved shoot tip necrosis problems. Cytokinin optimization with respect to shoot length was evaluated in 3 experiments, in which, BA, kinetin, MT, TDZ, and zeatin were all tested at various concentrations. Autoclaved zeatin at 4 µM or MT at 2 µM were the best 2 cytokinins and concentrations for promoting shoot growth. Two zeatin sterilization methods were tested, autoclaving following addition to medium, and filter sterilizing prior to adding to post-autoclaved medium. Autoclaving media that included zeatin proved to be effective methodology, thus avoiding filter sterilization, which commonly introduces microbial contaminants into media. Overall, Douglas maple growth and development during micropropagation were optimized on DKW medium, supplemented with iron (45 mg/l) and boron (12.0 mg/l) and either 4 µM autoclaved zeatin, or with 2 µM MT. Economic efficiency is improved by using MT, rather than the much more expensive zeatin.
- 1 January 2023
- Published by University of Wisconsin Press in Native Plants Journal
- Vol. 24 (3) , 234-246
In vitropropagation of Douglas maple (Acer glabrumvar.douglasii): 1. Role of basal medium formulation and concentrations of supplemental minerals and cytokinin on optimization of shoot multiplication
Douglas maple (Acer glabrum Torr. var. douglasii (Hook.) Dippel [Aceraceae]) is a potentially valuable landscape plant that lacks efficacious asexual propagation protocols. We conducted a series of developmental experiments to evaluate basal salts, supplemental minerals, and cytokinins to optimize culture medium formulations. Three commercial formulations of basal salts were evaluated, Driver and Kuniyaki Walnut (DKW), Murashige and Skoog (MS), and Woody Plant Medium (WPM). The DKW medium was superior to the other commercially available nutrient formulations for promoting shoot growth and enhancing node production. Iron supplementation (addition of 45 mg/l) resolved issues of chlorosis associated with reduced microcutting growth and multiplication rates. Supplementation of 12.0 mg/l boric acid resolved shoot tip necrosis problems. Cytokinin optimization with respect to shoot length was evaluated in 3 experiments, in which, BA, kinetin, MT, TDZ, and zeatin were all tested at various concentrations. Autoclaved zeatin at 4 µM or MT at 2 µM were the best 2 cytokinins and concentrations for promoting shoot growth. Two zeatin sterilization methods were tested, autoclaving following addition to medium, and filter sterilizing prior to adding to post-autoclaved medium. Autoclaving media that included zeatin proved to be effective methodology, thus avoiding filter sterilization, which commonly introduces microbial contaminants into media. Overall, Douglas maple growth and development during micropropagation were optimized on DKW medium, supplemented with iron (45 mg/l) and boron (12.0 mg/l) and either 4 µM autoclaved zeatin, or with 2 µM MT. Economic efficiency is improved by using MT, rather than the much more expensive zeatin.
- 1 January 2020
- Published by University of Wisconsin Press in Native Plants Journal
- Vol. 21 (3) , 359-363
Micropropagation methodology for Douglas Maple (Acer glabrumvar.douglasii)
Douglas maple (Acer glabrum Torr. var. douglasii (Hook.) Dippel [Aceraceae]) has habitat improvement characteristics that make it valuable for restoration and revegetation. Plants of the species also make very attractive specimen trees in urban landscapes. Recalcitrance during seed propagation reduces the potential of Douglas maple for use in either restoration or landscaping purposes. Herein, we propose a research-based, efficient micropropagation protocol to bypass seed propagation issues and allow production of marketable plants in commercial quantities. Inferences from previous research on maples suggests softwood stems harvested in spring or summer provide the best tissue for culture induction of single-node explants. Nutrient modification of commercial culture medium formulations is critical for preventing deleterious deficiency symptoms. Chlorosis and shoot tip necrosis occur when Douglas maple plantlets are grown on Driver and Kuniyuki Walnut (DKW) medium, which is the most suitable unmodified medium when compared with Murashige and Skoog (MS) and Woody Plant Medium (WPM). Providing relatively low light levels (photon flux of roughly 17 µmols·m-2·s-1 (1.58 µmols·ft-2·s-1) during microculture prevents abnormal growth and maximizes rate of multiplication. Meta-topolin may be preferable to trans-zeatin as a cytokinin to enhance multiplication for reasons of cost and comparable performance. Reproduction of plantlets is optimized using a 6-wk subculture cycle, wherein an estimated 12-fold explant multiplication rate can be achieved. Rather than rooting plantlets in culture, we found they acclimatized better to ex vitro conditions if rooted ex vitro (up to 92% survival after establishment in pots).
- 1 January 2020
- Published by University of Wisconsin Press in Native Plants Journal
- Vol. 21 (3) , 359-363
Micropropagation methodology for Douglas Maple (Acer glabrumvar.douglasii)
Douglas maple (Acer glabrum Torr. var. douglasii (Hook.) Dippel [Aceraceae]) has habitat improvement characteristics that make it valuable for restoration and revegetation. Plants of the species also make very attractive specimen trees in urban landscapes. Recalcitrance during seed propagation reduces the potential of Douglas maple for use in either restoration or landscaping purposes. Herein, we propose a research-based, efficient micropropagation protocol to bypass seed propagation issues and allow production of marketable plants in commercial quantities. Inferences from previous research on maples suggests softwood stems harvested in spring or summer provide the best tissue for culture induction of single-node explants. Nutrient modification of commercial culture medium formulations is critical for preventing deleterious deficiency symptoms. Chlorosis and shoot tip necrosis occur when Douglas maple plantlets are grown on Driver and Kuniyuki Walnut (DKW) medium, which is the most suitable unmodified medium when compared with Murashige and Skoog (MS) and Woody Plant Medium (WPM). Providing relatively low light levels (photon flux of roughly 17 µmols·m-2·s-1 (1.58 µmols·ft-2·s-1) during microculture prevents abnormal growth and maximizes rate of multiplication. Meta-topolin may be preferable to trans-zeatin as a cytokinin to enhance multiplication for reasons of cost and comparable performance. Reproduction of plantlets is optimized using a 6-wk subculture cycle, wherein an estimated 12-fold explant multiplication rate can be achieved. Rather than rooting plantlets in culture, we found they acclimatized better to ex vitro conditions if rooted ex vitro (up to 92% survival after establishment in pots).