Hriteshwar Talukder
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hriteshwar Talukder has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- M. Hussayeen Khan Anik
Department of Electrical and Electronic Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
4 shared publications - M. Ifaz Ahmad Isti
Department of Electrical and Electronic Engineering, Shahjalal University of Science and Technology, Sylhet, Bangladesh
3 shared publications - Shovasis Kumar Biswas
Department of Biomedical Engineering University of Wisconsin‐Madison Madison Wisconsin USA
3 shared publications - Jalil Piran
Sejong University
2 shared publications - Kyung Sup Kwak
Department of Information and Communication Engineering, Inha University, Incheon, South Korea
2 shared publications M. Ifaz Ahmad Isti
Department of Electrical and Electronic Engineering, Shahjalal University of Science & Technology, Sylhet, Bangladesh
2 shared publications
Latest Publications
- 9 November 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 114 (28)
Non-Bloch band theory of non-Hermitian photonic crystals
- 9 November 2026
- Published by American Physical Society (APS) in Physical Review B
- Vol. 114 (28)
Non-Bloch band theory of non-Hermitian photonic crystals
- 21 November 2022
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 137 (11) , 1-15
Double-layered side-polished ultra-highly sensitive photonic crystal fiber-based surface plasmonic refractive index sensor
- 21 November 2022
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 137 (11) , 1-15
Double-layered side-polished ultra-highly sensitive photonic crystal fiber-based surface plasmonic refractive index sensor
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (18) , 17819-17829
Numerical Investigation of a Gear-Shaped Triple-Band Perfect Terahertz Metamaterial Absorber as Biochemical Sensor
In this work, a triple-band perfect metamaterial absorber (MA) in the terahertz (THz) regime is demonstrated for different biochemical sensing applications. The metasurface’s unit cell is made up of a distinct metallic gear-shaped core with eight identical teeth and two concentric circular rings on the top layer. Finite Difference Time Domain (FDTD) method-based software is utilized for modeling and numerical analysis, and a genetic algorithm (GA) is employed to optimize some geometric parameters of the absorber. The proposed MA shows almost 100% absorption in the frequency range from 0.5 to 4.5 THz. The MA becomes almost insensitive to polarization angle when the number of gear-tooth has been increased. Resonance frequencies can be tweaked by adjusting the top layer’s geometric parameters while maintaining the absorption constant. The influence of different metals and forms in the top layer, such as solid and hollow circular metallic cores, on absorption spectra is also illustrated in this paper. The modelled MA can detect glucose, ethanol, oils, and cancer cell (BCC) by changing the resonance frequency and peak absorption of the spectra due to the variation in refractive index (RI) of the sample. When detecting ethanol, the absorber achieves a maximum sensitivity and figure of merit (FOM) of 56.67 THz/RIU and 358.7 RIU-1 respectively. In addition, effects of incident angle of light and bending of MA on absorption are analyzed in this study. With this unique feasible design, structural tunability and high sensitivity, the proposed absorber exhibits good promise in detecting biochemicals in THz region.
- 8 August 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (18) , 17819-17829
Numerical Investigation of a Gear-Shaped Triple-Band Perfect Terahertz Metamaterial Absorber as Biochemical Sensor
In this work, a triple-band perfect metamaterial absorber (MA) in the terahertz (THz) regime is demonstrated for different biochemical sensing applications. The metasurface’s unit cell is made up of a distinct metallic gear-shaped core with eight identical teeth and two concentric circular rings on the top layer. Finite Difference Time Domain (FDTD) method-based software is utilized for modeling and numerical analysis, and a genetic algorithm (GA) is employed to optimize some geometric parameters of the absorber. The proposed MA shows almost 100% absorption in the frequency range from 0.5 to 4.5 THz. The MA becomes almost insensitive to polarization angle when the number of gear-tooth has been increased. Resonance frequencies can be tweaked by adjusting the top layer’s geometric parameters while maintaining the absorption constant. The influence of different metals and forms in the top layer, such as solid and hollow circular metallic cores, on absorption spectra is also illustrated in this paper. The modelled MA can detect glucose, ethanol, oils, and cancer cell (BCC) by changing the resonance frequency and peak absorption of the spectra due to the variation in refractive index (RI) of the sample. When detecting ethanol, the absorber achieves a maximum sensitivity and figure of merit (FOM) of 56.67 THz/RIU and 358.7 RIU-1 respectively. In addition, effects of incident angle of light and bending of MA on absorption are analyzed in this study. With this unique feasible design, structural tunability and high sensitivity, the proposed absorber exhibits good promise in detecting biochemicals in THz region.
- 11 March 2022
- Published by Optica Publishing Group in Optics Continuum
- Vol. 1 (3) , 575-590
Highly sensitive double D-shaped channel photonic crystal fiber based plasmonic refractive index sensor
In this paper, a highly sensitive miniaturized surface plasmon resonance (SPR) based photonic crystal fiber (PCF) sensor is presented for a wide range of analyte sensing. Gold is selected as the plasmonic metal for its higher chemical stability and titanium oxide works as the adhesive layer for gold attachment on silica. The plasmonic metal and the sensing medium are placed exterior to the surface of the sensor design to make it fitting for practical applications. By a careful arrangement of the periodic arrangement of the refractive index in the design, the generation of the evanescent fields is fine-tuned to obtain the phase matching between the leaky core guided mode and the surface plasmon polariton (SPP) mode. Numerical simulations have been carried out by employing the finite element method (FEM) with the consideration of a perfectly matched layer (PML) to absorb surface radiations. The proposed sensor shows a maximum wavelength sensitivity of 34,000 nm/RIU (refractive index units) and a maximum amplitude sensitivity of 331 RIU−1, investigated by using the wavelength and the amplitude interrogation methods, respectively, for the analyte sensing range of 1.16 to 1.37 RI (refractive index). The sensor also exhibits a wavelength resolution of 2.94×10−6 RIU which indicates a high detection accuracy. On that, the proposed sensor would be an excellent candidate for a wide range of RI detection, applicable for various purposes such as chemical detections, medical diagnostics, bio-sensing, and other low RI analytes.
- 11 March 2022
- Published by Optica Publishing Group in Optics Continuum
- Vol. 1 (3) , 575-590
Highly sensitive double D-shaped channel photonic crystal fiber based plasmonic refractive index sensor
In this paper, a highly sensitive miniaturized surface plasmon resonance (SPR) based photonic crystal fiber (PCF) sensor is presented for a wide range of analyte sensing. Gold is selected as the plasmonic metal for its higher chemical stability and titanium oxide works as the adhesive layer for gold attachment on silica. The plasmonic metal and the sensing medium are placed exterior to the surface of the sensor design to make it fitting for practical applications. By a careful arrangement of the periodic arrangement of the refractive index in the design, the generation of the evanescent fields is fine-tuned to obtain the phase matching between the leaky core guided mode and the surface plasmon polariton (SPP) mode. Numerical simulations have been carried out by employing the finite element method (FEM) with the consideration of a perfectly matched layer (PML) to absorb surface radiations. The proposed sensor shows a maximum wavelength sensitivity of 34,000 nm/RIU (refractive index units) and a maximum amplitude sensitivity of 331 RIU−1, investigated by using the wavelength and the amplitude interrogation methods, respectively, for the analyte sensing range of 1.16 to 1.37 RI (refractive index). The sensor also exhibits a wavelength resolution of 2.94×10−6 RIU which indicates a high detection accuracy. On that, the proposed sensor would be an excellent candidate for a wide range of RI detection, applicable for various purposes such as chemical detections, medical diagnostics, bio-sensing, and other low RI analytes.
- 3 August 2021
- Published by Springer Nature
- p. 417-429
A Highly Sensitive Gold-TiO2 Coated Dual-Core PCF-SPR Sensor with a Large Detection Range
- 3 August 2021
- Published by Springer Nature
- p. 417-429
A Highly Sensitive Gold-TiO2 Coated Dual-Core PCF-SPR Sensor with a Large Detection Range
- Open Access
- 14 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 86155-86165
Numerical Design and Investigation of Circularly Segmented Air Holes-Assisted Hollow-Core Terahertz Waveguide as Optical Chemical Sensor
In this paper,a polarization-maintaining single-mode rectangular-shaped hollow-core waveguide with four segmented air cladding in the terahertz (THz) regime is presented for detecting various toxic industrial chemicals. A new type of injection moldable cyclic olefin copolymer, commercially named as TOPAS is used as the base fiber material for its high optical transmission and high resistance to other chemicals. The finite element method with a perfectly matched layer as the boundary condition is employed for numerical explorations. The proposed sensor exhibits ultra-high relative sensitivity of 99.73% and ultra-low effective material loss of 0.007 cm -1 at 1.6 THz frequency for Toluene in y polarization. This sensor also evinces a high birefringence of 4.16×10 -3 at 1.6 THz frequency. A maximum V parameter of 2.224 has been found at 2.2 THz which ensures the single-mode propagation of light. The sensor shows a very low confinement loss of 3.2×10 -11 dB/m and a high numerical aperture of 0.3574 at 1.6 THz frequency for Hydrogen Sulfide. This paper also concentrates on other important design parameters such as bending loss, mode field radius, beam divergence and effective area for serviceability of the sensor in the THz region. This sensor can be a very good candidate for various chemical detection as well as other applications in the terahertz regime.
- 14 June 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 86155-86165
Open AccessNumerical Design and Investigation of Circularly Segmented Air Holes-Assisted Hollow-Core Terahertz Waveguide as Optical Chemical Sensor
In this paper,a polarization-maintaining single-mode rectangular-shaped hollow-core waveguide with four segmented air cladding in the terahertz (THz) regime is presented for detecting various toxic industrial chemicals. A new type of injection moldable cyclic olefin copolymer, commercially named as TOPAS is used as the base fiber material for its high optical transmission and high resistance to other chemicals. The finite element method with a perfectly matched layer as the boundary condition is employed for numerical explorations. The proposed sensor exhibits ultra-high relative sensitivity of 99.73% and ultra-low effective material loss of 0.007 cm -1 at 1.6 THz frequency for Toluene in y polarization. This sensor also evinces a high birefringence of 4.16×10 -3 at 1.6 THz frequency. A maximum V parameter of 2.224 has been found at 2.2 THz which ensures the single-mode propagation of light. The sensor shows a very low confinement loss of 3.2×10 -11 dB/m and a high numerical aperture of 0.3574 at 1.6 THz frequency for Hydrogen Sulfide. This paper also concentrates on other important design parameters such as bending loss, mode field radius, beam divergence and effective area for serviceability of the sensor in the THz region. This sensor can be a very good candidate for various chemical detection as well as other applications in the terahertz regime.
- Top Cited Papers
- 18 May 2021
- Published by Springer Nature
- p. 457-468
Hate Speech Detection in the Bengali Language: A Dataset and Its Baseline Evaluation
- 18 May 2021
- Published by Springer Nature
- p. 457-468
Top Cited PapersHate Speech Detection in the Bengali Language: A Dataset and Its Baseline Evaluation
- Open Access
- 25 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 2924-2933
Milled Microchannel-Assisted Open D-Channel Photonic Crystal Fiber Plasmonic Biosensor
A surface plasmon resonance (SPR) based photonic crystal fiber (PCF) sensor having a milled microchannel, and an open D-channel has been proposed in this paper. The sensor shows good functionality in the wide sensing range of 1.14-1.36 Refractive Index Units (RIU) of the analyte, having the capability to detect low refractive index (RI). The Finite Element Method (FEM) based numerical investigations dictate that the proposed sensor has been able to gain a maximum wavelength sensitivity of 53,800 nm/RIU according to the wavelength interrogation technique. The amplitude interrogations show that the sensor has the highest amplitude sensitivity of 328 RIU -1 . The highest FOM (Figure of Merit) has been found to be 105 RIU -1 . The sensor evinces a minimum wavelength resolution of $1.86\times 10 ^{-6}$ RIU, which secures high detection accuracy. A circular perfectly matched layer (PML) is implemented in the sensor's outermost layer as a boundary condition to absorb surface radiations. Gold is the plasmonic metal, while TiO2 acts as the adhesive layer for gold attachment on silica. Due to the high sensitivity with a broad range of analyte detection, the sensor is well suited for practical biochemical detection purposes.- 25 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 2924-2933
Open AccessMilled Microchannel-Assisted Open D-Channel Photonic Crystal Fiber Plasmonic Biosensor
A surface plasmon resonance (SPR) based photonic crystal fiber (PCF) sensor having a milled microchannel, and an open D-channel has been proposed in this paper. The sensor shows good functionality in the wide sensing range of 1.14-1.36 Refractive Index Units (RIU) of the analyte, having the capability to detect low refractive index (RI). The Finite Element Method (FEM) based numerical investigations dictate that the proposed sensor has been able to gain a maximum wavelength sensitivity of 53,800 nm/RIU according to the wavelength interrogation technique. The amplitude interrogations show that the sensor has the highest amplitude sensitivity of 328 RIU -1 . The highest FOM (Figure of Merit) has been found to be 105 RIU -1 . The sensor evinces a minimum wavelength resolution of $1.86\times 10 ^{-6}$ RIU, which secures high detection accuracy. A circular perfectly matched layer (PML) is implemented in the sensor's outermost layer as a boundary condition to absorb surface radiations. Gold is the plasmonic metal, while TiO2 acts as the adhesive layer for gold attachment on silica. Due to the high sensitivity with a broad range of analyte detection, the sensor is well suited for practical biochemical detection purposes.