Yanan Sun
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yanan Sun has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Philipp Adelhelm
Institut für Chemie Humboldt‐Universität zu Berlin Berlin Germany
11 shared publications - Katherine A. Mazzio
Institut für Chemie Humboldt‐Universität zu Berlin Berlin Germany
4 shared publications - Volodymyr Baran
Deutsches Elektronen‐Synchrotron DESY Hamburg Germany
4 shared publications - Deniz Wong
Helmholtz‐Zentrum Berlin für Materialien und Energie GmbH Berlin Germany
3 shared publications - Götz Schuck
Department of Structure and Dynamics of Energy Materials Helmholtz‐Zentrum Berlin für Materialien Und Energie Berlin Germany
3 shared publications - Hui Wang
Department of Chemistry Humboldt University of Berlin Brook‐Taylor‐Str. 2 12489 Berlin Germany
3 shared publications
Latest Publications
- 12 May 2026
- Published by Springer Nature in Nature Energy
- Vol. 11 (6) , 797-798
Unlocking hidden sodium
- 12 May 2026
- Published by Springer Nature in Nature Energy
- Vol. 11 (6) , 797-798
Unlocking hidden sodium
- Open Access
- 6 February 2026
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 10 (3) , 231
Author Correction: Substitution and electrochemistry in layered oxide cathode materials for sodium-ion batteries
- 6 February 2026
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 10 (3) , 231
Open AccessAuthor Correction: Substitution and electrochemistry in layered oxide cathode materials for sodium-ion batteries
- Top Cited Papers
- 29 January 2026
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 10 (3) , 196-211
Substitution and electrochemistry in layered oxide cathode materials for sodium-ion batteries
Substitution is a vital strategy for developing high-performance sodium layered oxides (SLOs), which demonstrates great potential for making sodium-ion batteries a viable alternative to lithium-ion batteries. Numerous studies have been conducted on substituted SLOs; however, each substitute exhibits varied effects on the structure and electrochemical performance of the SLOs, and no clear design principles have been established. Clarifying the relationship among substitution, structure and performance is therefore important to enable a rational design strategy for high-performance SLOs. In this Review, the up-to-date substitution guidelines and the current understanding of how substitution affects the structure and electrochemistry in SLOs are discussed, and the site preference and characteristic redox features of different types of substitutes are outlined. The inherent challenges and opportunities for the innovation of better-performing SLOs are summarized, paving the way for accelerating the commercialization of SLO-based sodium-ion batteries and the realization of their applications ranging from electric vehicles to grid energy storage systems.
- 29 January 2026
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 10 (3) , 196-211
Top Cited PapersSubstitution and electrochemistry in layered oxide cathode materials for sodium-ion batteries
Substitution is a vital strategy for developing high-performance sodium layered oxides (SLOs), which demonstrates great potential for making sodium-ion batteries a viable alternative to lithium-ion batteries. Numerous studies have been conducted on substituted SLOs; however, each substitute exhibits varied effects on the structure and electrochemical performance of the SLOs, and no clear design principles have been established. Clarifying the relationship among substitution, structure and performance is therefore important to enable a rational design strategy for high-performance SLOs. In this Review, the up-to-date substitution guidelines and the current understanding of how substitution affects the structure and electrochemistry in SLOs are discussed, and the site preference and characteristic redox features of different types of substitutes are outlined. The inherent challenges and opportunities for the innovation of better-performing SLOs are summarized, paving the way for accelerating the commercialization of SLO-based sodium-ion batteries and the realization of their applications ranging from electric vehicles to grid energy storage systems.
- Open Access
- 12 December 2025
- Published by Springer Nature in Research Square
Identifying cycling current-dependent degradation pathways in high-voltage layered sodium–ion cathodes
High-voltage operation boosts the energy density of sodium layered oxides by activating oxygen redox, but the underlying degradation mechanisms remain controversial, hindering rational materials design. Here we demonstrate that the applied cycling current determines which degradation pathway dominates, thereby resolving this long-standing inconsistency. Using synchrotron-based X-ray probes, advanced microscopic characterizations and first-principle calculation on a compositionally controlled set of Sc-, Sc–Ti-, and Sc–Ti–B-doped O3-type oxides, it is revealed that low current preserves oxygen-redox participation and drives oxygen-loss-induced degradation, whereas high current suppresses oxygen redox and induces a transition to a structure-governed evolution pathway along simplified P3-type routes. This compositional set makes the current-dependent degradation behaviour experimentally distinguishable, allowing the oxygen-redox-driven and structure-governed modes to be clearly disentangled. These findings establish a unified current-governed mechanistic framework and provide guidance for designing durable high-voltage sodium-ion cathodes.
- 12 December 2025
- Published by Springer Nature in Research Square
Open AccessIdentifying cycling current-dependent degradation pathways in high-voltage layered sodium–ion cathodes
High-voltage operation boosts the energy density of sodium layered oxides by activating oxygen redox, but the underlying degradation mechanisms remain controversial, hindering rational materials design. Here we demonstrate that the applied cycling current determines which degradation pathway dominates, thereby resolving this long-standing inconsistency. Using synchrotron-based X-ray probes, advanced microscopic characterizations and first-principle calculation on a compositionally controlled set of Sc-, Sc–Ti-, and Sc–Ti–B-doped O3-type oxides, it is revealed that low current preserves oxygen-redox participation and drives oxygen-loss-induced degradation, whereas high current suppresses oxygen redox and induces a transition to a structure-governed evolution pathway along simplified P3-type routes. This compositional set makes the current-dependent degradation behaviour experimentally distinguishable, allowing the oxygen-redox-driven and structure-governed modes to be clearly disentangled. These findings establish a unified current-governed mechanistic framework and provide guidance for designing durable high-voltage sodium-ion cathodes.
- Open Access
SnS Anodes with High Volumetric Capacity for Na‐ion Batteries and Their Characterization in Ether and Ester Electrolytes
A current limitation to improving the volumetric energy density of Na‐ion batteries is the low density of the hard carbon(HC) anode. This problem can be solved by using high‐density, high‐capacity materials like SnS, which reacts with Na over a combined conversion and alloying reaction that theoretically provides 1022 mAh g −1 and 5335 mAh cc −1 (materials level). Here, composites containing SnS and thermally activated graphite(t‐G) are prepared by ball‐milling and tested with different electrolyte solutions. Adding 5 wt.% of t‐G is sufficient to obtain significant improvements in capacity and cycle life, reaching 608 mAh g −1 initially and 439 mAh g −1 after 100 cycles. Even without calendaring, the obtained volumetric capacity of 283 mAh cc −1 (electrode level) is already on‐par with commercial HC electrodes. Moreover, ether‐based electrolytes are found to be superior to ester‐based electrolytes, enabling high storage capacity and cycle life. The reaction is investigated by operando X‐ray diffraction and operando dilatometry. The inferior performance in ester‐based electrolytes is found to be due to a larger polarization that largely prevents the alloying reaction that occurs close to 0 V. Over cycling, the conversion reaction becomes gradually inactive while the alloying reaction shows a much better degree of reversibility.
Open AccessSnS Anodes with High Volumetric Capacity for Na‐ion Batteries and Their Characterization in Ether and Ester Electrolytes
A current limitation to improving the volumetric energy density of Na‐ion batteries is the low density of the hard carbon(HC) anode. This problem can be solved by using high‐density, high‐capacity materials like SnS, which reacts with Na over a combined conversion and alloying reaction that theoretically provides 1022 mAh g −1 and 5335 mAh cc −1 (materials level). Here, composites containing SnS and thermally activated graphite(t‐G) are prepared by ball‐milling and tested with different electrolyte solutions. Adding 5 wt.% of t‐G is sufficient to obtain significant improvements in capacity and cycle life, reaching 608 mAh g −1 initially and 439 mAh g −1 after 100 cycles. Even without calendaring, the obtained volumetric capacity of 283 mAh cc −1 (electrode level) is already on‐par with commercial HC electrodes. Moreover, ether‐based electrolytes are found to be superior to ester‐based electrolytes, enabling high storage capacity and cycle life. The reaction is investigated by operando X‐ray diffraction and operando dilatometry. The inferior performance in ester‐based electrolytes is found to be due to a larger polarization that largely prevents the alloying reaction that occurs close to 0 V. Over cycling, the conversion reaction becomes gradually inactive while the alloying reaction shows a much better degree of reversibility.
- Open Access
- 18 July 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (9) , 1441-1449
Solvent co-intercalation in layered cathode active materials for sodium-ion batteries
Solvent co-intercalation, that is, the combined intercalation of ions and solvent molecules into electrode materials, is an additional but much less explored lever for modifying the properties of metal-ion battery electrodes (metal = Li, Na, Mg, etc.). Knowledge on solvent co-intercalation is relatively scarce and largely limited to graphite anodes, for which in sodium-ion batteries, the co-intercalation of glyme molecules is fast and highly reversible. The use of co-intercalation for cathode active materials (CAMs) remains much less explored. Here we investigate for a series of sodium-layered sulfide CAMs (Na x MS2, M = Ti, V, Cr and mixtures) under which conditions solvent co-intercalation occurs and how this process impacts the phase behaviour, electrode breathing, redox potential and cycle life compared to ‘Na+-only’ intercalation. Co-intercalation is a complex process that can, for example, cause opposing fluxes, meaning that solvents intercalate into the CAMs while sodium ions simultaneously deintercalate. Co-intercalation leads to layered structures that can include different amounts of confined solvated ions, ions and unbound solvent molecules. It is an approach to designing structurally diverse, layered materials with potential applications for batteries and beyond.
- 18 July 2025
- Published by Springer Nature in Nature Materials
- Vol. 24 (9) , 1441-1449
Open AccessSolvent co-intercalation in layered cathode active materials for sodium-ion batteries
Solvent co-intercalation, that is, the combined intercalation of ions and solvent molecules into electrode materials, is an additional but much less explored lever for modifying the properties of metal-ion battery electrodes (metal = Li, Na, Mg, etc.). Knowledge on solvent co-intercalation is relatively scarce and largely limited to graphite anodes, for which in sodium-ion batteries, the co-intercalation of glyme molecules is fast and highly reversible. The use of co-intercalation for cathode active materials (CAMs) remains much less explored. Here we investigate for a series of sodium-layered sulfide CAMs (Na x MS2, M = Ti, V, Cr and mixtures) under which conditions solvent co-intercalation occurs and how this process impacts the phase behaviour, electrode breathing, redox potential and cycle life compared to ‘Na+-only’ intercalation. Co-intercalation is a complex process that can, for example, cause opposing fluxes, meaning that solvents intercalate into the CAMs while sodium ions simultaneously deintercalate. Co-intercalation leads to layered structures that can include different amounts of confined solvated ions, ions and unbound solvent molecules. It is an approach to designing structurally diverse, layered materials with potential applications for batteries and beyond.
- Open Access
- 11 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
SnS anodes with high volumetric capacity for Na-ion batteries and their characterization in ether and ester electrolytes
A current limitation to improving the volumetric energy density of Na-ion batteries is the low density of the hard carbon(HC) anode. This problem could be solved by using high-density, high-capacity materials like SnS, which reacts with Na over a combined conversion and alloying reaction that theoretically provide 1022 mAh g–1 and 5335 mAh cc–1(materials level). Here, composites containing SnS and thermally activated graphite(t-G) are prepared by ball-milling and tested with different electrolyte solutions. Adding 5 wt% of t-G is sufficient to obtain significant improvements in capacity and cycle life, reaching 608 mAh g⁻¹ initially and 439 mAh g⁻¹ after 100 cycles. Even without calendaring, the obtained volumetric capacity of 283 mAh cc–1(electrode level) is already on-par with commercial HC electrodes. At the same time, ether-based electrolytes are found to be superior to esterbased electrolytes enabling high storage capacity and cycle life. The reaction is studied using different methods including operando XRD and operando dilatometry. The inferior performance in ester-based elecrolytes is found to be due to a larger polarization that largely prevents the alloying reaction that occurs close to 0 V. Over cycling, the conversion reaction becomes gradually inactive while the alloying reaction shows a much better degree of reversibility.
- 11 February 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSnS anodes with high volumetric capacity for Na-ion batteries and their characterization in ether and ester electrolytes
A current limitation to improving the volumetric energy density of Na-ion batteries is the low density of the hard carbon(HC) anode. This problem could be solved by using high-density, high-capacity materials like SnS, which reacts with Na over a combined conversion and alloying reaction that theoretically provide 1022 mAh g–1 and 5335 mAh cc–1(materials level). Here, composites containing SnS and thermally activated graphite(t-G) are prepared by ball-milling and tested with different electrolyte solutions. Adding 5 wt% of t-G is sufficient to obtain significant improvements in capacity and cycle life, reaching 608 mAh g⁻¹ initially and 439 mAh g⁻¹ after 100 cycles. Even without calendaring, the obtained volumetric capacity of 283 mAh cc–1(electrode level) is already on-par with commercial HC electrodes. At the same time, ether-based electrolytes are found to be superior to esterbased electrolytes enabling high storage capacity and cycle life. The reaction is studied using different methods including operando XRD and operando dilatometry. The inferior performance in ester-based elecrolytes is found to be due to a larger polarization that largely prevents the alloying reaction that occurs close to 0 V. Over cycling, the conversion reaction becomes gradually inactive while the alloying reaction shows a much better degree of reversibility.
- Open Access
- 14 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Role of silicon as structural stabilizer and redox-active element in multicomponent (Sn, Sb, Fe, Si) alloy electrodes for Na-ion batteries
Metal alloys are attractive electrode materials for Na-ion batteries (SIBs) thanks to their high theoretical capacities. Because of its good availability and promising use in Li-ion batteries, silicon is also interesting for SIBs. However, so far its use has not been very successful because formation of the NaSi phase (954 mAh g-1) is kinetically unfavourable. Here we investigate the role of Si in multicomponent alloys composed of redox active metals tin (Sn), antimony (Sb), and redox inactive iron (Fe), which acts as a structural stabilizer. The composites are prepared by high-energy ball milling. Obtained particles and agglomerates are typically in the lower μm-range (0.5 – 10 μm) and contain the different metals and/or intermetallic phases as determined by SEM and XRD. It is found that Si remains electrochemically inactive irrespective of its chemical state but still provides some benefits. Similar to Fe, Si acts as a structural stabilizer for composite electrodes. Excellent rate capability is demonstrated by the Sn:Si:Fe alloy, while highest capacity and long-term stability are found for the Sn:Sb:Si (2:2:1) alloy. The stabilizing effect of Si (and Fe) is observed through operando electrochemical dilatometry, which shows a much smaller degree in electrode breathing compared to the Si/Fe-free electrode.
- 14 November 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessRole of silicon as structural stabilizer and redox-active element in multicomponent (Sn, Sb, Fe, Si) alloy electrodes for Na-ion batteries
Metal alloys are attractive electrode materials for Na-ion batteries (SIBs) thanks to their high theoretical capacities. Because of its good availability and promising use in Li-ion batteries, silicon is also interesting for SIBs. However, so far its use has not been very successful because formation of the NaSi phase (954 mAh g-1) is kinetically unfavourable. Here we investigate the role of Si in multicomponent alloys composed of redox active metals tin (Sn), antimony (Sb), and redox inactive iron (Fe), which acts as a structural stabilizer. The composites are prepared by high-energy ball milling. Obtained particles and agglomerates are typically in the lower μm-range (0.5 – 10 μm) and contain the different metals and/or intermetallic phases as determined by SEM and XRD. It is found that Si remains electrochemically inactive irrespective of its chemical state but still provides some benefits. Similar to Fe, Si acts as a structural stabilizer for composite electrodes. Excellent rate capability is demonstrated by the Sn:Si:Fe alloy, while highest capacity and long-term stability are found for the Sn:Sb:Si (2:2:1) alloy. The stabilizing effect of Si (and Fe) is observed through operando electrochemical dilatometry, which shows a much smaller degree in electrode breathing compared to the Si/Fe-free electrode.
- Open Access
- 25 June 2024
- Published by American Chemical Society (ACS) in ChemRxiv
‘Oxygen bound to magnesium’ as high voltage redox center causes sloping of the potential profile in Mg-doped layered oxides for Na-ion batteries
The potential profile of layered oxides as cathodes for Na-ion batteries can be well tuned by cation doping. Doping typically leads to changes in the phase behavior and the redox chemistry, but the processes and design rules are often unclear, especially at potentials above approximately 4 V vs. Na+/Na. Here, we study by means of synchrotron methods and DFT calculations how Mg- and Sc-doping influences the properties of layered O3-NaNi0.5Mn0.5O2. A strong oxygen redox activity is observed at high voltages and both dopants are found to be effective for decreasing the number of phase transitions and for improving cycle life. When comparing the effect of the dopants, notable differences in the first cycle are observed. While the Sc doping maintains the high voltage plateau, Mg doping causes a more sloping behavior. This difference can be understood from the appearance of a new redox center (arising from the ‘O bound to Mg') having a higher redox potential but being more irreversible compared to the redox activity of ‘O bound to Ni'. The appearance of an additional redox center explains findings obtained for other doped Ni- and Mn-based layered oxides, which also show a sloping potential in the high voltage region.
- 25 June 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open Access‘Oxygen bound to magnesium’ as high voltage redox center causes sloping of the potential profile in Mg-doped layered oxides for Na-ion batteries
The potential profile of layered oxides as cathodes for Na-ion batteries can be well tuned by cation doping. Doping typically leads to changes in the phase behavior and the redox chemistry, but the processes and design rules are often unclear, especially at potentials above approximately 4 V vs. Na+/Na. Here, we study by means of synchrotron methods and DFT calculations how Mg- and Sc-doping influences the properties of layered O3-NaNi0.5Mn0.5O2. A strong oxygen redox activity is observed at high voltages and both dopants are found to be effective for decreasing the number of phase transitions and for improving cycle life. When comparing the effect of the dopants, notable differences in the first cycle are observed. While the Sc doping maintains the high voltage plateau, Mg doping causes a more sloping behavior. This difference can be understood from the appearance of a new redox center (arising from the ‘O bound to Mg') having a higher redox potential but being more irreversible compared to the redox activity of ‘O bound to Ni'. The appearance of an additional redox center explains findings obtained for other doped Ni- and Mn-based layered oxides, which also show a sloping potential in the high voltage region.
- Open Access
- 24 September 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Competing mechanisms determine oxygen redox in doped Ni-Mn based layered oxides for Na-ion batteries
Cation doping is an effective strategy for improving the cyclability of layered oxide cathode materials through suppression of phase transitions in the high voltage region (>~4.0V). In this study we choose Mg and Sc as representative dopants in P2- Na0.67Ni0.33Mn0.67O2. While both dopants have a positive effect on the cycling stability, they are found to influence the properties in the high voltage regime in different ways. Through a combination of RIXS, XRD, XAS, PDF analysis, and DFT, we show that it is more than just suppression of the P2 to O2 phase transition that is critical for promoting the favorable properties, and that the interplay between Ni and O activity are also critical aspects that dictate the performance. With Mg doping, we could enhance the Ni activity while simultaneously suppressing the O activity. This is surprising because it is in contrast to what has been reported in other Mn-based layered oxides where Mg is known to trigger oxygen redox. We address this contradiction by proposing a competing mechanism between Ni and Mg that impacts differences in O activity in Na0.67MgxNi0.33-xMn0.67O2 (x<0<0.33). These findings provide a new direction in understanding the effects of cation doping on the electrochemical behavior of layered oxides.
- 24 September 2023
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessCompeting mechanisms determine oxygen redox in doped Ni-Mn based layered oxides for Na-ion batteries
Cation doping is an effective strategy for improving the cyclability of layered oxide cathode materials through suppression of phase transitions in the high voltage region (>~4.0V). In this study we choose Mg and Sc as representative dopants in P2- Na0.67Ni0.33Mn0.67O2. While both dopants have a positive effect on the cycling stability, they are found to influence the properties in the high voltage regime in different ways. Through a combination of RIXS, XRD, XAS, PDF analysis, and DFT, we show that it is more than just suppression of the P2 to O2 phase transition that is critical for promoting the favorable properties, and that the interplay between Ni and O activity are also critical aspects that dictate the performance. With Mg doping, we could enhance the Ni activity while simultaneously suppressing the O activity. This is surprising because it is in contrast to what has been reported in other Mn-based layered oxides where Mg is known to trigger oxygen redox. We address this contradiction by proposing a competing mechanism between Ni and Mg that impacts differences in O activity in Na0.67MgxNi0.33-xMn0.67O2 (x<0<0.33). These findings provide a new direction in understanding the effects of cation doping on the electrochemical behavior of layered oxides.