Gede Adi Wiguna Sudiartha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Gede Adi Wiguna Sudiartha has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Tsuyoshi Imai
Graduate School of Sciences and Technology for Innovation, Yamaguchi University, Yamaguchi 755-8611, Japan
7 shared publications - Yung-Tse Hung
Department of Civil and Environmental Engineering, Cleveland State University, Cleveland, OH 44115, USA
3 shared publications - Alissara Reungsang
Biotechnology Program, Faculty of Technology, Khon Kaen University, Khon Kaen, Thailand
2 shared publications Ardiwinata
Environmental and Agricultural Research Laboratory, Jakenan-Pati, Indonesia
1 shared publication- Chonticha Mamimin
Department of Biotechnology, Faculty of Technology, Khon Kaen University, Khon Kaen 40002, Thailand
1 shared publication Cokorda Istri Niti Laksmi Dewi
1 shared publication
Latest Publications
- Open Access
- 1 January 2026
- Published by American Institute of Mathematical Sciences (AIMS) in AIMS Environmental Science
- Vol. 13 (1) , 39-55
Process stability and microbial adaptation during temperature shift from thermophilic to mesophilic temperature in anaerobic digestion
Thermophilic anaerobic digestion often achieves higher biogas yields than mesophilic conditions, but its high energy demand limits long-term sustainability. As a result, many thermophilic digesters may transition toward mesophilic conditions. This study examined the effects of stepwise temperature shift from thermophilic to mesophilic ranges on biogas production and microbial community dynamics, while identifying factors that support or inhibit methane generation. At 55 ℃ and 50 ℃, methane yields reached 342 and 311 mL CH4/g COD, respectively, with a predominance of hydrogenotrophic Methanobacterium, alongside abundant Coprothermobacter, Defluviitoga, Acetomicrobium, Candidatus Bipolaricaulis, Brachyspira, and Dictyoglomus, suggesting potential syntrophic interactions between these microorganisms. At 45 ℃ and 40 ℃, the methane yield declined to 234 and 219 mL CH4/g COD but recovered to 289 and 251 mL CH4/g COD at 35 ℃ and 30 ℃, respectively. In the mesophilic range, frequent accumulation of acetate and butyrate coincided with a methanogenic shift from hydrogenotrophic Methanobacterium to acetoclastic Methanothrix, indicating a pathway transition. These results reveal that lowering the digestion temperature from thermophilic to mesophilic conditions enables recovery of acetogenic activity and shifts methanogenesis from hydrogenotrophic to acetoclastic pathways, with implications for optimizing biogas production during long-term operation.
- 1 January 2026
- Published by American Institute of Mathematical Sciences (AIMS) in AIMS Environmental Science
- Vol. 13 (1) , 39-55
Open AccessProcess stability and microbial adaptation during temperature shift from thermophilic to mesophilic temperature in anaerobic digestion
Thermophilic anaerobic digestion often achieves higher biogas yields than mesophilic conditions, but its high energy demand limits long-term sustainability. As a result, many thermophilic digesters may transition toward mesophilic conditions. This study examined the effects of stepwise temperature shift from thermophilic to mesophilic ranges on biogas production and microbial community dynamics, while identifying factors that support or inhibit methane generation. At 55 ℃ and 50 ℃, methane yields reached 342 and 311 mL CH4/g COD, respectively, with a predominance of hydrogenotrophic Methanobacterium, alongside abundant Coprothermobacter, Defluviitoga, Acetomicrobium, Candidatus Bipolaricaulis, Brachyspira, and Dictyoglomus, suggesting potential syntrophic interactions between these microorganisms. At 45 ℃ and 40 ℃, the methane yield declined to 234 and 219 mL CH4/g COD but recovered to 289 and 251 mL CH4/g COD at 35 ℃ and 30 ℃, respectively. In the mesophilic range, frequent accumulation of acetate and butyrate coincided with a methanogenic shift from hydrogenotrophic Methanobacterium to acetoclastic Methanothrix, indicating a pathway transition. These results reveal that lowering the digestion temperature from thermophilic to mesophilic conditions enables recovery of acetogenic activity and shifts methanogenesis from hydrogenotrophic to acetoclastic pathways, with implications for optimizing biogas production during long-term operation.
- Open Access
Suppression of Sulfur-Induced Corrosion in Sewer Pipe Using Conductive Carbon and Magnetite Iron Linings
Sewer corrosion driven by sulfur metabolism threatens infrastructure durability. Current study examined the effect of conductive lining materials on microbial communities and sulfide control under simulated sewer conditions. Three lab-scale reactors (3.5 L total volume, 2.1 L working volume) were prepared with amorphous carbon (SAN-EARTH) and magnetite-black (MTB) linings, while a Portland cement reactor with no coating served as the control. Each reactor was operated for 120 days at room temperature and fed with artificial wastewater. The working volume consisted of 1.4 L of synthetic wastewater mixed with 0.7 L of sewage sludge used as the inoculum source. Sulfate, sulfide, hydrogen sulfide, nitrogen species, pH, and organic carbon were monitored, and microbial dynamics were analyzed via 16S rRNA sequencing and functional annotation. SAN-EARTH and MTB reactors completely suppressed sulfide and hydrogen sulfide, while Portland cement showed the highest accumulation. Both conductive linings maintained alkaline conditions (pH 9.0–10.5), favoring sulfide oxidation. Microbial analysis revealed enrichment of sulfur-oxidizing bacteria (Thiobacillus sp.) and electroactive taxa (Geobacter sp.), alongside syntrophic interactions involving Aminobacterium and Jeotgalibaca. These findings indicate that conductive lining materials reshape microbial communities and sulfur metabolism, offering a promising strategy to mitigate sulfide-driven sewer corrosion.
Open AccessSuppression of Sulfur-Induced Corrosion in Sewer Pipe Using Conductive Carbon and Magnetite Iron Linings
Sewer corrosion driven by sulfur metabolism threatens infrastructure durability. Current study examined the effect of conductive lining materials on microbial communities and sulfide control under simulated sewer conditions. Three lab-scale reactors (3.5 L total volume, 2.1 L working volume) were prepared with amorphous carbon (SAN-EARTH) and magnetite-black (MTB) linings, while a Portland cement reactor with no coating served as the control. Each reactor was operated for 120 days at room temperature and fed with artificial wastewater. The working volume consisted of 1.4 L of synthetic wastewater mixed with 0.7 L of sewage sludge used as the inoculum source. Sulfate, sulfide, hydrogen sulfide, nitrogen species, pH, and organic carbon were monitored, and microbial dynamics were analyzed via 16S rRNA sequencing and functional annotation. SAN-EARTH and MTB reactors completely suppressed sulfide and hydrogen sulfide, while Portland cement showed the highest accumulation. Both conductive linings maintained alkaline conditions (pH 9.0–10.5), favoring sulfide oxidation. Microbial analysis revealed enrichment of sulfur-oxidizing bacteria (Thiobacillus sp.) and electroactive taxa (Geobacter sp.), alongside syntrophic interactions involving Aminobacterium and Jeotgalibaca. These findings indicate that conductive lining materials reshape microbial communities and sulfur metabolism, offering a promising strategy to mitigate sulfide-driven sewer corrosion.
- Open Access
- 22 September 2023
- Published by MDPI AG in Preprints.org
Thermotolerance and Hydrogen Production Potential of Salt-tolerant Microflora from Salt Fields
Upper mesophilic temperature acclimation of halophilic, hydrogen-producing bacteria from salt fields was investigated in this study, along with the changes in microbial abundance during an-aerobic digestion (AD) process. Genomic approaches such as PCR-denaturing gradient gel elec-trophoresis (DGGE) and next-generation sequencing (NGS) were performed to profile the mi-crobial communities. During AD, there was a significant abundance of Halanaerobacter lacunarum at 48°C followed by the increase in hydrogen yield, signifying potential contribution from the halophile in the hydrogen production. A decrease in the dominance of H. lacunarum and Halan-aerobium fermentans at 42°C, likely due to an increase in other bacterial species, was noted but their dominance significantly increased at temperatures of 45°C and 48°C. This investigation provides valuable insights in highlighting the potential of Halanaerobium sp. and the other halo-philic bacteria to adapt under upper mesophilic temperature conditions and synthesizing hy-drogen. The findings in the present study also underscore the importance of optimizing temper-ature and pH conditions to maximize hydrogen yield during high-salt anaerobic digestion.
- 22 September 2023
- Published by MDPI AG in Preprints.org
Open AccessThermotolerance and Hydrogen Production Potential of Salt-tolerant Microflora from Salt Fields
Upper mesophilic temperature acclimation of halophilic, hydrogen-producing bacteria from salt fields was investigated in this study, along with the changes in microbial abundance during an-aerobic digestion (AD) process. Genomic approaches such as PCR-denaturing gradient gel elec-trophoresis (DGGE) and next-generation sequencing (NGS) were performed to profile the mi-crobial communities. During AD, there was a significant abundance of Halanaerobacter lacunarum at 48°C followed by the increase in hydrogen yield, signifying potential contribution from the halophile in the hydrogen production. A decrease in the dominance of H. lacunarum and Halan-aerobium fermentans at 42°C, likely due to an increase in other bacterial species, was noted but their dominance significantly increased at temperatures of 45°C and 48°C. This investigation provides valuable insights in highlighting the potential of Halanaerobium sp. and the other halo-philic bacteria to adapt under upper mesophilic temperature conditions and synthesizing hy-drogen. The findings in the present study also underscore the importance of optimizing temper-ature and pH conditions to maximize hydrogen yield during high-salt anaerobic digestion.
- Open Access
- 8 July 2023
- Published by MDPI AG in Fermentation
- Vol. 9 (7) , 642
Effects of Temperature Shifts on Microbial Communities and Biogas Production: An In-Depth Comparison
Temperature plays a significant role in anaerobic digestion (AD) as it affects the microbial communities and ultimately controls the efficiency of the process. Few studies have looked at temperature-adjusted AD, but it is unclear how the temperature shifts affect biogas production and the dynamics of microorganisms involved in methanogenesis. This study tested two temperature shift scenarios in fed-batch mode using anaerobically digested sewage sludge and glucose-based substrate. The first scenario was acclimatized to upshifting temperatures from 42 °C to 48 °C while the second was acclimatized to downshifting temperatures from 55 °C to 45 °C. Both temperature shift scenarios resulted in a decrease in biogas production, especially at 45 °C. The upshifted scenario experienced a maximum decrease of 83%, and the downshifted scenario experienced a 16–33% decrease in methane production. Next-generation 16S rRNA sequencing revealed the domination of Methanoculleus in the upshifted scenario. However, a low correlation between the number of Methanoculleus and the other hydrogenotrophic methanogens to biogas production indicates inhibition in the hydrogenotrophic pathway. The downshifted scenario showed better biogas production due to the substantial domination of acetoclastic Methanosaeta and the low abundance of sulfate-reducing bacteria. Hence, the temperature shift affects the microbial communities, significantly affecting biogas production performance.
- 8 July 2023
- Published by MDPI AG in Fermentation
- Vol. 9 (7) , 642
Open AccessEffects of Temperature Shifts on Microbial Communities and Biogas Production: An In-Depth Comparison
Temperature plays a significant role in anaerobic digestion (AD) as it affects the microbial communities and ultimately controls the efficiency of the process. Few studies have looked at temperature-adjusted AD, but it is unclear how the temperature shifts affect biogas production and the dynamics of microorganisms involved in methanogenesis. This study tested two temperature shift scenarios in fed-batch mode using anaerobically digested sewage sludge and glucose-based substrate. The first scenario was acclimatized to upshifting temperatures from 42 °C to 48 °C while the second was acclimatized to downshifting temperatures from 55 °C to 45 °C. Both temperature shift scenarios resulted in a decrease in biogas production, especially at 45 °C. The upshifted scenario experienced a maximum decrease of 83%, and the downshifted scenario experienced a 16–33% decrease in methane production. Next-generation 16S rRNA sequencing revealed the domination of Methanoculleus in the upshifted scenario. However, a low correlation between the number of Methanoculleus and the other hydrogenotrophic methanogens to biogas production indicates inhibition in the hydrogenotrophic pathway. The downshifted scenario showed better biogas production due to the substantial domination of acetoclastic Methanosaeta and the low abundance of sulfate-reducing bacteria. Hence, the temperature shift affects the microbial communities, significantly affecting biogas production performance.
- Open Access
- 1 January 2023
- Published by European Alliance for Innovation n.o.
Investigation of Methane Production and Microbial Communities of Digested Sewage Sludge on Thermotolerant Anaerobic Digestion
The operating temperature of an anaerobic digestion (AD) process regulates CH4 production and microbial communities. This study investigated the CH4 production and microbial communities at the temperature range between mesophilic and thermophilic temperatures, which was defined as the thermotolerant region. Laboratory-scale anaerobic digestion was carried out using 160 ml vials with digested sludge as inoculum. The vials were then incubated under temperature conditions of 42 °C, 45 °C, and 48 °C. A higher temperature condition significantly enhanced the methane production from 0.21, 0.27, to 0.29 L/g COD at 42, 45, and 48 °C respectively. During incubation, the methanogen population was dominated by acetoclastic Methanosaeta, while only a few of hydrogenotrophic methanogens were found. One of the major competitors of Methanosaeta in craving available acetate to produce CH4 is the syntrophic acetateoxidizing bacteria (SAOB). The high population of SAOB suppressed the growth of Methanosaeta which consequently lower the CH4 production by 12%.
- 1 January 2023
- Published by European Alliance for Innovation n.o.
Open AccessInvestigation of Methane Production and Microbial Communities of Digested Sewage Sludge on Thermotolerant Anaerobic Digestion
The operating temperature of an anaerobic digestion (AD) process regulates CH4 production and microbial communities. This study investigated the CH4 production and microbial communities at the temperature range between mesophilic and thermophilic temperatures, which was defined as the thermotolerant region. Laboratory-scale anaerobic digestion was carried out using 160 ml vials with digested sludge as inoculum. The vials were then incubated under temperature conditions of 42 °C, 45 °C, and 48 °C. A higher temperature condition significantly enhanced the methane production from 0.21, 0.27, to 0.29 L/g COD at 42, 45, and 48 °C respectively. During incubation, the methanogen population was dominated by acetoclastic Methanosaeta, while only a few of hydrogenotrophic methanogens were found. One of the major competitors of Methanosaeta in craving available acetate to produce CH4 is the syntrophic acetateoxidizing bacteria (SAOB). The high population of SAOB suppressed the growth of Methanosaeta which consequently lower the CH4 production by 12%.
- Open Access
- 8 May 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 19 (9) , 5728
Effects of Stepwise Temperature Shifts in Anaerobic Digestion for Treating Municipal Wastewater Sludge: A Genomic Study
In wastewater treatment plants (WWTP), anaerobic digester (AD) units are commonly operated under mesophilic and thermophilic conditions. In some cases, during the dry season, maintaining a stable temperature in the digester requires additional power to operate a conditioning system. Without proper conditioning systems, methanogens are vulnerable to temperature shifts. This study investigated the effects of temperature shifts on CH4 gas production and microbial diversity during anaerobic digestion of anaerobic sewage sludge using a metagenomic approach. The research was conducted in lab-scale AD under stepwise upshifted temperature from 42 to 48 °C. The results showed that significant methanogen population reduction during the temperature shift affected the CH4 production. With 70 days of incubation each, CH4 production decreased from 4.55 L·g−1-chemical oxygen demand (COD) at 42 °C with methanogen/total population (M·TP−1) ratio of 0.041 to 1.52 L·g−1 COD (M·TP−1 ratio 0.027) and then to 0.94 L·g−1 COD ( M·TP−1 ratio 0.026) after the temperature was shifted to 45 °C and 48 °C, respectively. Methanosaeta was the most prevalent methanogen during the thermal change. This finding suggests that the Methanosaeta genus was a thermotolerant archaea. Anaerobaculum, Fervidobacterium, and Tepidanaerobacter were bacterial genera and grew well in shifted-up temperatures, implying heat-resistant characteristics.
- 8 May 2022
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 19 (9) , 5728
Open AccessEffects of Stepwise Temperature Shifts in Anaerobic Digestion for Treating Municipal Wastewater Sludge: A Genomic Study
In wastewater treatment plants (WWTP), anaerobic digester (AD) units are commonly operated under mesophilic and thermophilic conditions. In some cases, during the dry season, maintaining a stable temperature in the digester requires additional power to operate a conditioning system. Without proper conditioning systems, methanogens are vulnerable to temperature shifts. This study investigated the effects of temperature shifts on CH4 gas production and microbial diversity during anaerobic digestion of anaerobic sewage sludge using a metagenomic approach. The research was conducted in lab-scale AD under stepwise upshifted temperature from 42 to 48 °C. The results showed that significant methanogen population reduction during the temperature shift affected the CH4 production. With 70 days of incubation each, CH4 production decreased from 4.55 L·g−1-chemical oxygen demand (COD) at 42 °C with methanogen/total population (M·TP−1) ratio of 0.041 to 1.52 L·g−1 COD (M·TP−1 ratio 0.027) and then to 0.94 L·g−1 COD ( M·TP−1 ratio 0.026) after the temperature was shifted to 45 °C and 48 °C, respectively. Methanosaeta was the most prevalent methanogen during the thermal change. This finding suggests that the Methanosaeta genus was a thermotolerant archaea. Anaerobaculum, Fervidobacterium, and Tepidanaerobacter were bacterial genera and grew well in shifted-up temperatures, implying heat-resistant characteristics.
- Open Access
- 17 December 2021
- Published by The Institute for Research and Community Services (LPPM) ITB in Journal of Engineering and Technological Sciences
- Vol. 53 (6) , 210603
Analysis of Faecal Sludge Treatment Alternatives to Enhance the Treatment Performance of Wastewater Treatment Plant (WWTP) Denpasar Sewerage Development Project (DSDP) Suwung Denpasar City
Most of the wastewater generated from domestic activities in Denpasar city is treated in an off-site treatment plant located in WWTP DSDP Suwung. This includes faecal sludge that originates from on-site treatment plants. The existing treatment facilities can only treat wastewater that has a maximum biochemical oxygen demand (BOD) concentration of around 225 mg/l while the disposed faecal sludge?s BOD concentration reaches 3,394 mg/l. Therefore, an additional faecal sludge treatment plant needs to be established in order to separate the solid phase from the liquid phase. According to the treatment performance calculation, some alternative treatments can achieve BOD5 and TSS removal of up to 97% and 98% respectively. The selection of the alternative treatment was decided from weighting results of several aspects, such as economic, land use, technological and environmental aspects. The weighting method that was used in this research was Simple Additive Weighting (SAW). The advantage of SAW is its ability to do the assessment highly precisely because it is based on predetermined criteria and preference weights. Based on the weighting result, the treatment technology selected was a Solid Separation Chamber as primary treatment, combined with an Anaerobic Baffled Reactor as a secondary treatment. A Belt Filter-Press was applied to reshape the sludge into a recyclable cake. The required cost is approximately 16 billion rupiahs.
- 17 December 2021
- Published by The Institute for Research and Community Services (LPPM) ITB in Journal of Engineering and Technological Sciences
- Vol. 53 (6) , 210603
Open AccessAnalysis of Faecal Sludge Treatment Alternatives to Enhance the Treatment Performance of Wastewater Treatment Plant (WWTP) Denpasar Sewerage Development Project (DSDP) Suwung Denpasar City
Most of the wastewater generated from domestic activities in Denpasar city is treated in an off-site treatment plant located in WWTP DSDP Suwung. This includes faecal sludge that originates from on-site treatment plants. The existing treatment facilities can only treat wastewater that has a maximum biochemical oxygen demand (BOD) concentration of around 225 mg/l while the disposed faecal sludge?s BOD concentration reaches 3,394 mg/l. Therefore, an additional faecal sludge treatment plant needs to be established in order to separate the solid phase from the liquid phase. According to the treatment performance calculation, some alternative treatments can achieve BOD5 and TSS removal of up to 97% and 98% respectively. The selection of the alternative treatment was decided from weighting results of several aspects, such as economic, land use, technological and environmental aspects. The weighting method that was used in this research was Simple Additive Weighting (SAW). The advantage of SAW is its ability to do the assessment highly precisely because it is based on predetermined criteria and preference weights. Based on the weighting result, the treatment technology selected was a Solid Separation Chamber as primary treatment, combined with an Anaerobic Baffled Reactor as a secondary treatment. A Belt Filter-Press was applied to reshape the sludge into a recyclable cake. The required cost is approximately 16 billion rupiahs.
- Open Access
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 623 (1) , 012001
Analysis of land requirements of Temesi final disposal facility, Gianyar Regency with 3R waste management scenario
Based on waste generation projection in 2040, the total waste generation in Gianyar Regency was approximately about 1,208.88 m3/day from a total occupant of 593,436 inhabitants in Gianyar Regency. The existing supporting capacity of Temesi Final Disposal (Temesi Landfill) was 51,500 m3; meanwhile, the total waste generation in Gianyar Regency in 2020 is up to 146,356 m3 consequently Temesi Landfill was overloaded by untreated solid waste since 2020. To reduce waste generation and decrease the treatment burden in Temesi Landfill, solid waste management using 3R methods from household clusters needs to be applied. Using 3R concept, eventually, the waste generation that is disposed into Temesi Landfill can be reduced significantly by 63%, from 1,208.88 m3/day into 446 m3/day with a total weight of 148 tonne/day in 2040. Within the 3R waste management from households, the land requirement could be reduced to only 1.08 Ha in 2020 and 14.35 Ha in 2040 from previously about 3 Ha and 39 Ha. Within the forecast results, it is concluded that the upstream 3R scenario has a significant impact on reducing waste generation; thus, it will also lead to fewer landfill area demands.
- 1 January 2021
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 623 (1) , 012001
Open AccessAnalysis of land requirements of Temesi final disposal facility, Gianyar Regency with 3R waste management scenario
Based on waste generation projection in 2040, the total waste generation in Gianyar Regency was approximately about 1,208.88 m3/day from a total occupant of 593,436 inhabitants in Gianyar Regency. The existing supporting capacity of Temesi Final Disposal (Temesi Landfill) was 51,500 m3; meanwhile, the total waste generation in Gianyar Regency in 2020 is up to 146,356 m3 consequently Temesi Landfill was overloaded by untreated solid waste since 2020. To reduce waste generation and decrease the treatment burden in Temesi Landfill, solid waste management using 3R methods from household clusters needs to be applied. Using 3R concept, eventually, the waste generation that is disposed into Temesi Landfill can be reduced significantly by 63%, from 1,208.88 m3/day into 446 m3/day with a total weight of 148 tonne/day in 2040. Within the 3R waste management from households, the land requirement could be reduced to only 1.08 Ha in 2020 and 14.35 Ha in 2040 from previously about 3 Ha and 39 Ha. Within the forecast results, it is concluded that the upstream 3R scenario has a significant impact on reducing waste generation; thus, it will also lead to fewer landfill area demands.
- Open Access
- 5 February 2020
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 148, 07009
One-Dimensional Pollutant Transport Modelling of Cadmium (Cd), Chromium (Cr) and Lead (Pb) in Saguling Reservoir
The existing conditions of the Saguling Reservoir are reported to have suffered severe heavy metal pollution due to the presence of wastewater inputs from various types of industries flowing into Citarum River and then accumulating in the Saguling Reservoir. From the results of calibration tests of heavy metal models on water using the Root Mean Square Error (RMSE) analysis and Relative Error (RE) analysis, obtained dispersion coefficients on Cadmium, Chromium, and Lead metals sequentially 1 m2 / second (with RMSE 0,00515 and 34% relative error); 1 m2 / second (with RMSE 0.00595 and relative error 26%); and 2.5 m2 / second (with RMSE 0.028205 and relative error 41.25%) which shows that the model has good capability to simulate the concentration of heavy metals approaching the actual data both in the dry and wet seasons. From the results of the verification test models of concentration of cadmium, lead and chromium in sediments using the Root Mean Square Error (RMSE) analysis and Relative Error (RE) analysis, obtained sequentially 18.53 and 77%; 10.43 and 47.15%; 2.789 and 33%. Error values in sediment concentrations are quite large because of the difficulty of making assumptions that are close to natural conditions.
- 5 February 2020
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 148, 07009
Open AccessOne-Dimensional Pollutant Transport Modelling of Cadmium (Cd), Chromium (Cr) and Lead (Pb) in Saguling Reservoir
The existing conditions of the Saguling Reservoir are reported to have suffered severe heavy metal pollution due to the presence of wastewater inputs from various types of industries flowing into Citarum River and then accumulating in the Saguling Reservoir. From the results of calibration tests of heavy metal models on water using the Root Mean Square Error (RMSE) analysis and Relative Error (RE) analysis, obtained dispersion coefficients on Cadmium, Chromium, and Lead metals sequentially 1 m2 / second (with RMSE 0,00515 and 34% relative error); 1 m2 / second (with RMSE 0.00595 and relative error 26%); and 2.5 m2 / second (with RMSE 0.028205 and relative error 41.25%) which shows that the model has good capability to simulate the concentration of heavy metals approaching the actual data both in the dry and wet seasons. From the results of the verification test models of concentration of cadmium, lead and chromium in sediments using the Root Mean Square Error (RMSE) analysis and Relative Error (RE) analysis, obtained sequentially 18.53 and 77%; 10.43 and 47.15%; 2.789 and 33%. Error values in sediment concentrations are quite large because of the difficulty of making assumptions that are close to natural conditions.