GWGuannan Wu

Guannan Wu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Guannan Wu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Direct Shear Creep Characteristics and Microstructure of Fiber‐Reinforced Soil

    by Hao Tang, Huahua Li, Zhao Duan, Chiyang Liu, Guannan Wu, Jinzhi Luo

    Fiber‐reinforced soil is an excellent engineering material that has become a focus of research. Most studies focus on the conventional mechanical properties of reinforced soil, such as its tensile, compressive, and shear strength, and rarely study its creep‐related mechanical properties. However, when such soil is used as backfill, the creep effect should not be ignored. This study explored the characteristics of creep mechanics in reinforced soil, the fiber‐reinforcement mechanism, and the dynamics of microstructures before and after creep tests. Direct shear creep tests were carried out using a direct shear creep tester on soil reinforced with natural palm fibers of equal length (1.5 cm) in different amounts (0%, 0.2%, 0.6%, 1.0%). Microscale tests were carried out on the reinforced soil samples before and after the creep tests by polarized light and scanning electron microscopy. The results show that the fiber reinforcement can restrain the deformation and enhance the long‐term strength of soil. However, a nonlinear relationship between the reinforcement effect and fiber content was found, with 0.6% being the optimal content. Palm fibers have rough surfaces, grooves, and independent pore chambers, which increase the effective contact area and interaction with the soil. With increases in fiber content, the fibers interweave to form a nestled network structure, which increases the strength and integrity of the soil. Fiber addition changes the microstructure of the soil pores; the proportion of large pores decreases and that of small pores increases. Under the effect of creep, the pore changes follow the principle of pore homogenization; large pores are destroyed and transformed into small pores, causing the porosity of reinforced soil to decrease faster and be less porous than unreinforced soil. This research can provide technical reference for the engineering application of palm fiber‐reinforced soil.


  • Open Access

    Influence of Acidic Substances on Compression Deformation Characteristics of Loess

    by Hao Tang, Chiyang Liu, Nianqin Wang, Huahua Li, Guannan Wu, Jinzhi Luo, Mengli Zeng

    Current research theories on acid‐contaminated soils indicate that acids can alter the physical properties of soils, which in turn can affect their engineering mechanical properties. However, compressibility, one of the most important mechanical properties of loess, may be affected by acidic substances. To investigate the influence of acid on the compression properties of loess, this study uses a uniaxial compressor to investigate the changes of compression properties of loess under different acid concentrations and different acid immersion times and attempts to predict the causes of macroscopic compressibility changes from the microscopic pore changes of acid‐etched loess. The test results show that when the soaking time is the same, the hydrochloric acid concentration increases from 0 to 3.0 mol/L, the compression coefficient Cc increases by 43.20–87.5%, and the compression yield stress σpc decreases by 51.36–60.86%; when the concentration of hydrochloric acid is the same, the soaking time increases from 1 day to 12 days, the compression coefficient Cc increases by 119.05–197.46%, and compressive yield stress σpc decreases by 10.67–22.02%. The microscopic images of loess soaked for 12 days at 3.0 mol/L hydrochloric acid concentration were compared with those of the original loess. The percentages of micropore, small pore, mesopore, and macropore areas of original loess were 20.90%, 79.10%, 0%, and 0%, respectively. The percentages of micropore, small pore, mesopore, and macropore areas of acid‐etched loess were 6.24%, 37.21%, 1.14%, and 55.40%, respectively. The enhancement of the compressive properties of acid‐etched loess is the result of the coupling of acid concentration and soaking time, and the change of macroscopic compressive properties may be related to the increase of microscopic macropore area after acid erosion. The results of this study can be used as a reference for the study of soil mechanical properties in acid‐contaminated soils.