JYJiaming Yang

Jiaming Yang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jiaming Yang has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Reconstruction of Fuel Electrode Surface via Acid Etching to Enhance the Performance of Solid Oxide Cells

    by Yueyue Sun, Jun Zhou, Jiaming Yang, Zhengrong Liu, Chaofan Yin, Zixuan Xue, Zilin Zhou, Jiajia Cui, Kai Wu

    Solid oxide electrochemical cells exhibit high efficiency in energy storage and utilization under various operational modes. However, sluggish kinetics on the fuel side impede both the hydrogen oxidation reaction and carbon dioxide reduction reaction. A-site deficiency strategy can enhance the exsolution of highly active nanoparticles, thereby accelerating electrochemical reactions at the fuel electrode. Herein, acid treatment selectively etches surface cations of the Sr 2 Fe 1.5 Mo 0.5 O 6-δ -based fuel electrode, reconstructing an A-site deficient surface that promotes the exsolution of CoFe nanoparticles. The etched sample demonstrates a significant enhancement under both fuel cell mode and CO 2 electrolysis mode.

  • Exsolution Synthesis of Alloyed Nanoparticles from Perovskite Oxide by Plasma

    by Qinghao Li, Jun Zhou, Zi-He Zhu, Lei Fu, Jiaming Yang, Kai Wu

    Bimetallic alloy nanoparticles (NPs) exsolved on the surface of perovskite oxides (ABO3) alter the structural and electronic properties of the primarily monometallic counterparts. These synergistic effects make the whole material present superior electrolytic and catalytic performances. The strong bonding interaction between alloy NPs and perovskite substrate enables the stability and durability of the catalysis. However, traditional thermal exsolution requires a long-time treatment at a high temperature. Researchers have been pursuing more time-saving and energy-efficient alternative routes. Herein, a low-temperature and fast pathway based on the dielectric barrier discharge (DBD) reactor is provided to in-situ exsolve alloy NPs. A favorable activity of the catalyst for CO oxidation is demonstrated. Additionally, we conclude that the factor restricts metallic agglomeration is the morphology of the substrate. Even after an overtime plasma treatment, the exsolved alloy NPs are still embedded in the porous structure of perovskite oxides.

  • Tuning Exsolution of Nanoparticles in Defect Engineered Ruddlesden–Popper oxides for efficient CO2 electrolysis

    by Zhengrong Liu, Yueyue Sun, Jiaming Yang, Lei Fu, Jun Zhou, Kai Wu

    Solid oxide cell (SOC) is the energy conversion device with a series of advantages such as high efficiency, environmental friendliness and durability, making it a promising way to deal with environmental pollution and energy crisis appearing with the development of human society. Perovskite oxides with hetero-phases which were prepared by in-situ exsolution are widely used as fuel electrode in SOC. In this work, Ni-doped perovskites Ruddlesden–Popper oxides, (La, Sr)nTinO3n-2 with n = 5, 8, and 12 (LSTNn), were synthesized to design novel exsolution materials as solid oxide fuel cell anodes and for electrochemical catalysis applications. Compared with pure LSTNn without Ni, a small A-site deficiency (10%) promoted the exsolution of Ni from the perovskite oxides of Ni-doped LSTNn. It is found that the morphology as well as electrochemical activity of LSTNn anodes can be successfully manipulated by the exsolution of Ni. Since more Ni nanoparticles are exsolved from the parent oxides, LSTN8 displays better electrochemical performance by providing more active sides during the hydrogen oxidation reaction and significantly lowering electrode polarization resistance. DRT analysis is conducted to study substeps of the whole electrode reaction, finding that in-situ precipitation improves rate-limiting steps much. The CO2 reduction reaction performance of LSTN materials is also studied, finding that in-situ grown nanoparticles on surface of LSTN significantly increases the density of surface active sites and three phase boundaries (TPBs), which are beneficial for CO2 adsorption and subsequent conversion. It is clear from these results that varying Ni-doping in Ruddlesden–Popper oxides is a key factor in controlling the electrochemical performance and catalytic activity for hydrogen oxidation reaction in solid oxide fuel cells.

  • A-Site Deficient Lst-Based Perovskite Fibers with Ni Exsolution for Reversible Solid Oxide Cells

    by Jiaming Yang, Yueyue Sun, Lei Fu, Zhengrong Liu, Jun Zhou, Kai Wu

    Reversible solid oxide cells (RSOCs) as new energy converting devices with superior conversion efficiency can operate in both fuel cell (FC) mode and electrolysis cell (EC) mode. However, the main challenges for fuel electrode materials are poor electrochemical performance and limited durability due to the sluggish hydrogen catalysis kinetics. Here, we demonstrate an advanced fiber-structured LaxSrxTi0.9Ni0.1O3-δ (LSTNx) architecture with a series of A-site deficiency (x=0.5, 0.45, and 0.4), which can be applied to reversible solid cells as a promising candidate of fuel electrode materials. LSTNx fibers decorated with Ni nanoparticles (NPs) were fabricated via electrospinning technique and in-situ exsolution method. A-site deficiency played a critical role in Ni exsolution and the morphology of LSTNx nanofibers. La0.4Sr0.4Ti0.9Ni0.1O3-δ fibers with moderate A-site deficiency displayed homogeneous Ni NPs on the surface and excellent stability at 800℃ in pure H2. A single cell with LSTN0.4 fuel electrode (~40 μm) | GDC barrier layer (~0.5 μm) | SSZ electrolyte (~250 μm) | GDC barrier layer (~0.5 μm) | composite LSCF-GDC air electrode (~40 μm) exhibits maximum power density of 547.44 mW·cm-2 at 800℃ in wet H2 and the current density of -1.351 A·cm-2 under the potential of 1.5 V in 50% H2O/H2 atmosphere. The 5-cyclic long-term reversible tests of FC and EC modes were carried out under the potential of 0.5/1.5 V for 60 h, respectively. The current density degradation was approximately 0.67% in EC mode and 2.73% in FC mode after 5-cyclic reversible tests in LSTN0.4 single cells, suggesting a reliable fiber-structured architecture for RSOCs. Figure 1

  • Sr3Fe1.5Zn0.5O7-δ as Cathode for Protonic-Conducting Solid Oxide Fuel Cells with Enhanced Oxygen Reduction Reaction Activity

    by Yueyue Sun, Zhengrong Liu, Zilin Zhou, Jiaming Yang, Hongfei Zhao, Chaofan Yin, Kai Wu, Jun Zhou

    Common concerns about green energy have led to a wide focus on solid oxide fuel cells (SOFCs) for their environmental friendship and high efficiency. As the most popular electrode, perovskite materials feature the flexible structure and abundant oxygen sites, which correspondingly leads to diverse doping strategies and good electrochemical performance. However, the high operating temperature results in hot corrosion of both cells and encapsulating materials. Operating under various atmospheres, the generated impurities also cause a measure of irreversible degradation. Here, we first introduced Zn to Sr3Fe2O7-δ perovskite cathode in protonic ceramic fuel cells (PCFCs). Ruddlesden-Popper oxides Sr3Fe2-xZnxO7-δ (SFZx, x=0, 0.1, 0.5) were successfully synthesized and exhibited great performance under intermediate temperatures. The polarization resistance is 0.072 Ω·cm-2 which is 47% lower than that of the undoped Sr3Fe2O7-δ, and the maximum peak power density of the single-cell of NiO-BaZr0.1Ce0.7Y0.2O3- δ(BZCY)|BZCY|SFZ05 reaches 523.56 mW·cm-2 at 750℃, increased by 22%. The improvement is attributed to the formation of oxygen vacancies and the larger triple-phase boundary areas. Furthermore, the electrochemical impedance spectra (EIS) and distribution of relaxation time (DRT) results manifest that the rate-limiting steps are accelerated charge transfer and ionic migration processes. Finally, SFZ05 also presented better CO2 tolerance under an atmosphere of 5% CO2/air. These results display that SFZ05 is a promising candidate for a highly active and stable cathode for PCFCs.


  • Sr3Fe1.5Zn0.5O7-δ as Cathode for Protonic-Conducting Solid Oxide Fuel Cells with Enhanced Oxygen Reduction Reaction Activity

    by Yueyue Sun, Zhengrong Liu, Zilin Zhou, Jiaming Yang, Hongfei Zhao, Chaofan Yin, Kai Wu, Jun Zhou

    Perovskite oxides have attracted intensive attention for their good electrochemical performance and stability as electrodes for protonic ceramic fuel cells (PCFCs). However, operating under high temperatures and various atmospheres results in a large polarization resistance and sluggish oxygen reduction reaction (ORR) in cathodes. Here, Zn was successfully doped into Sr3Fe2O7-δ (SFO) Ruddlesden-Popper (RP) perovskite cathode and the Sr3Fe1.5Zn0.5O7-δ (SFZ05) shows a superior ORR activity. The polarization resistance of SFZ05 is 0.072 Ω·cm-2, which is 47% lower than that of the undoped SFO, and the maximum peak power density of the single-cell of NiO-BaZr0.1Ce0.7Y0.2O3-δ(BZCY)|BZCY|SFZ05 reaches 523.56 mW·cm-2 at 750℃, increased by 22% than SFO. The improvement is attributed to the formation of oxygen vacancies and the increase of proton conductivity. These results display that SFZ05 is a promising candidate for a highly active and stable cathode for PCFCs.


  • Open Access

    Experimental and numerical studies on lithium-ion battery heat generation behaviors

    by Chongtian Wu, Linxu Wu, Chenghui Qiu, Jiaming Yang, Xiaolu Yuan, Yufei Cai, Hong Shi


  • Enhanced oxygen reduction reaction of LaSrCoO4–Ce0.9Mn0.1O2 composite cathode for solid oxide fuel cells

    by Ke Wu, Lei Fu, Jun Zhou, Likai Zhou, Jiaming Yang, Zhengrong Liu, Hongfei Zhao, Qinyuan Deng, Kai Wu


  • Probing charge transfer under external bias at Cu/SrTiO3 heterojunction

    by Lei Fu, Jun Zhou, Jiaming Yang, Qinghao Li, Haomin Guo, Qinyuan Deng, Zihe Zhu, Zixuan Zhang, Haoyu Yu, Kai Wu


  • Electrospun Core–Shell Fibers for High-Efficient Composite Cathode-Based Solid Oxide Fuel Cells

    by Jiaming Yang, Junkai Wang, Lei Fu, Ke Wu, Zhengrong Liu, Kai Wu, Jun Zhou