Xiaojun Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaojun Yang has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Vincenzo Naddeo
Sanitary Environmental Engineering Division (SEED), Department of Civil Engineering, University of Salerno, Fisciano, Italy
2 shared publications - Yingjie Cai
Hubei Provincial Engineering Laboratory for Clean Production and High Value Utilization of Bio-based Textile Materials, Wuhan Textile University, Wuhan, China
2 shared publications - Feng Lyu
College of Environmental Engineering, Wuhan Textile University, Wuhan 430200, China
1 shared publication - Fengze Han
College of Environmental Engineering, Wuhan Textile University, Wuhan 430200, China
1 shared publication - Ikram Ul Hoque
Discipline of Chemistry, The University of Newcastle, University Drive, Callaghan, NSW 2308, Australia
1 shared publication - Jun Long
School of Resources and Environmental Engineering, Wuhan Textile University, Wuhan 430200, China
1 shared publication
Latest Publications
- Open Access
Effects of High Salinity on Nitrogen Removal Efficiency and Microbial Community Structure in a Three-Stage AO System
This study investigated the nitrogen removal performance of a three-stage AO reactor for refractory TN and the changes in microbial community structure within the activated sludge system under varying sodium chloride concentration conditions. Under an influent sodium chloride concentration of 0 g/L with sufficient carbon source, the removal rates of Total Nitrogen (TN), Chemical Oxygen Demand (CODcr), and Ammonium (NH4+-N) remained stable at 98%, 99.7%, and 99.9%, respectively. When the sodium chloride concentration increased to 20 g/L, the activity of AOB was significantly inhibited, with removal efficiency rates dropping to 83%, 89%, and 70%, respectively, and the NAR increasing to 91.97%. Analytical results demonstrated that both ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) exhibited inhibited metabolic activities, with NOB experiencing earlier functional impairment. Under NaCl concentrations ≤ 10 g/L, conventional nitrogen removal via nitrification–denitrification (ND) remained dominant. When NaCl concentrations exceeded 10 g/L, due to the accumulation of NO2−-N, the phyla Planctomycetota and Proteobacteria maintained dominance in the microbial community, while partial nitrification (PN) and denitrification pathways gradually replaced ND. Extracellular polymeric substance (EPS) secretion emerged as the primary microbial defense mechanism against salinity stress. Experimental findings informed proposed strategies including phased acclimatization for salt-tolerance enhancement, EPS production regulation, and targeted enrichment of functional consortia, which collectively improved the denitrification efficiency by 18.7–22.3% under salinity levels ≤ 20 g/L. This study provides theoretical foundations and technical references for process optimization in hypersaline industrial wastewater treatment systems.
Open AccessEffects of High Salinity on Nitrogen Removal Efficiency and Microbial Community Structure in a Three-Stage AO System
This study investigated the nitrogen removal performance of a three-stage AO reactor for refractory TN and the changes in microbial community structure within the activated sludge system under varying sodium chloride concentration conditions. Under an influent sodium chloride concentration of 0 g/L with sufficient carbon source, the removal rates of Total Nitrogen (TN), Chemical Oxygen Demand (CODcr), and Ammonium (NH4+-N) remained stable at 98%, 99.7%, and 99.9%, respectively. When the sodium chloride concentration increased to 20 g/L, the activity of AOB was significantly inhibited, with removal efficiency rates dropping to 83%, 89%, and 70%, respectively, and the NAR increasing to 91.97%. Analytical results demonstrated that both ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB) exhibited inhibited metabolic activities, with NOB experiencing earlier functional impairment. Under NaCl concentrations ≤ 10 g/L, conventional nitrogen removal via nitrification–denitrification (ND) remained dominant. When NaCl concentrations exceeded 10 g/L, due to the accumulation of NO2−-N, the phyla Planctomycetota and Proteobacteria maintained dominance in the microbial community, while partial nitrification (PN) and denitrification pathways gradually replaced ND. Extracellular polymeric substance (EPS) secretion emerged as the primary microbial defense mechanism against salinity stress. Experimental findings informed proposed strategies including phased acclimatization for salt-tolerance enhancement, EPS production regulation, and targeted enrichment of functional consortia, which collectively improved the denitrification efficiency by 18.7–22.3% under salinity levels ≤ 20 g/L. This study provides theoretical foundations and technical references for process optimization in hypersaline industrial wastewater treatment systems.
- Open Access
Municipal Sewage Treatment Technology: A2/O-VMBR Integrated Technology for Municipal Treatment and Improved Pollutant Removal
To modernize wastewater treatment plants, a pilot-scale anaerobic/anoxic/oxic-vibrating membrane bioreactor (A2/O-VMBR) was developed and successfully operated. Despite a low C/N ratio, the A2/O-VMBR achieved removal rates of 61.10%, 93.77%, 72.86%, and 54.75% for COD, TN, TP, and NH3-N, respectively. The maximum and extremity transmembrane pressures were 45 kPa, and 80 kPa, respectively, with no sludge bulking observed. The VMBR saved over 96–98% of energy compared to traditional MBR plants, making it a better option for municipal wastewater treatment. High-throughput sequencing analysis revealed identical bacterial population structures in samples obtained from the treatment units, with genera having nitrifying, denitrifying, hydrolyzing, and glycogen-accumulating activities, which allowed for nitrogen removal. The key functional microorganisms responsible for nitrification–denitrification were species belonging to the genera FCPU426, Fusobacteria, Planctomycetes, Verrucomicrobia, and Epsilonbacteraeota. The integrated experimental system produced favorable results in improving wastewater quality, highlighting the usability of the A2/O-VMBR technology. Therefore, this technique holds potential for further investigation into the context of wastewater treatment and recovery.
Open AccessMunicipal Sewage Treatment Technology: A2/O-VMBR Integrated Technology for Municipal Treatment and Improved Pollutant Removal
To modernize wastewater treatment plants, a pilot-scale anaerobic/anoxic/oxic-vibrating membrane bioreactor (A2/O-VMBR) was developed and successfully operated. Despite a low C/N ratio, the A2/O-VMBR achieved removal rates of 61.10%, 93.77%, 72.86%, and 54.75% for COD, TN, TP, and NH3-N, respectively. The maximum and extremity transmembrane pressures were 45 kPa, and 80 kPa, respectively, with no sludge bulking observed. The VMBR saved over 96–98% of energy compared to traditional MBR plants, making it a better option for municipal wastewater treatment. High-throughput sequencing analysis revealed identical bacterial population structures in samples obtained from the treatment units, with genera having nitrifying, denitrifying, hydrolyzing, and glycogen-accumulating activities, which allowed for nitrogen removal. The key functional microorganisms responsible for nitrification–denitrification were species belonging to the genera FCPU426, Fusobacteria, Planctomycetes, Verrucomicrobia, and Epsilonbacteraeota. The integrated experimental system produced favorable results in improving wastewater quality, highlighting the usability of the A2/O-VMBR technology. Therefore, this technique holds potential for further investigation into the context of wastewater treatment and recovery.
- Open Access
Combination of Pre- and Post-Mercerization Processes for Cotton Fabric
The dyeing process commonly deteriorates the luster of pre-mercerized cotton fabric, so post-mercerization processes are regularly applied to compensate for this. Herein, the influence of combining pre-mercerization with CS (caustic solution) or LA (liquid ammonia) and post-mercerization with CS or LA on the morphological structure, dyeing performance, tensile strength, and stiffness of woven cotton fabric was investigated. The crystallinity index values greatly decreased from 73.12 to 51.25, 58.73, 38.42, and 40.90% after the combined mercerization processes of LA–LA, CS–CS, LA–CS, and CS–LA, respectively. Additionally, the CS–LA- and LA–CS-treated samples exhibited a mixture of cellulose II and cellulose III allomorphs. The combined mercerization processing of cotton fabric resulted in slightly worse thermal stability. The LA and CS pre-mercerization processes increased the dye exhaustion, although the former decreased the dye fixation rate while the latter increased it by 4% for both dyes. The color strength of the dyed cotton fabric increased after both post-mercerization processes. Moreover, the fabric stiffness and mechanical properties showed an increasing trend due to the combined mercerization efforts.
Open AccessCombination of Pre- and Post-Mercerization Processes for Cotton Fabric
The dyeing process commonly deteriorates the luster of pre-mercerized cotton fabric, so post-mercerization processes are regularly applied to compensate for this. Herein, the influence of combining pre-mercerization with CS (caustic solution) or LA (liquid ammonia) and post-mercerization with CS or LA on the morphological structure, dyeing performance, tensile strength, and stiffness of woven cotton fabric was investigated. The crystallinity index values greatly decreased from 73.12 to 51.25, 58.73, 38.42, and 40.90% after the combined mercerization processes of LA–LA, CS–CS, LA–CS, and CS–LA, respectively. Additionally, the CS–LA- and LA–CS-treated samples exhibited a mixture of cellulose II and cellulose III allomorphs. The combined mercerization processing of cotton fabric resulted in slightly worse thermal stability. The LA and CS pre-mercerization processes increased the dye exhaustion, although the former decreased the dye fixation rate while the latter increased it by 4% for both dyes. The color strength of the dyed cotton fabric increased after both post-mercerization processes. Moreover, the fabric stiffness and mechanical properties showed an increasing trend due to the combined mercerization efforts.
- 15 January 2021
- Published by Springer Nature in Cellulose
- Vol. 28 (4) , 2521-2536
Adsorption, kinetics, and thermodynamic studies of cacao husk extracts in waterless sustainable dyeing of cotton fabric
- 15 January 2021
- Published by Springer Nature in Cellulose
- Vol. 28 (4) , 2521-2536
Adsorption, kinetics, and thermodynamic studies of cacao husk extracts in waterless sustainable dyeing of cotton fabric